aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2006-09-11[PATCH] bcm43xx: ucode debug status via sysfsLarry Finger
This patch prints out the ucode debug status to sysfs. So, users can watch the microcode status of their hardware. Signed-off-by: Martin Langer <martin-langer@gmx.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx: Add firmware version printoutLarry Finger
This patch prints microcode revision, patchlevel, date and time to KERN_INFO. Also, version 4.xx microcodes (rev>0x128) will be rejected by the driver, because they still do not work. Signed-off-by: Martin Langer <martin-langer@gmx.de> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx: remove dead statistics codeLarry Finger
This patch removes code that was make obsolete when the wireless statistics in bcm43xx-softmac were changed, but was overlooked at that time. The value of bcm->stats.link_quality computed here is never used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] Prism54 : add bitrates to scan resultJean Tourrilhes
This patch adds bitrate information to the scan result in the Prism54 driver, like some/most other driver do. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] zd1211rw: Removed unneeded packed attributesUlrich Kunitz
Inspired by an e-mail by Stephen Hemminger I decided to remove all unneeded packed attributes from the code where the member variables are already aligned. This avoids horrible code being generated on some architectures. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] zd1211rw: Add ID for Asus WL-159gDaniel Drake
Tested by Vincent TOUCHARD zd1211 chip 0b05:170c v4802 high 00-11-d8 AL2230_RF pa0 g--- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] zd1211rw: Add ID for Siemens Gigaset USB Stick 54Daniel Drake
Tested by Martin Dummer. zd1211 chip 0b3b:5630 v4330 high 00-01-e3 RF2959_RF pa0 --- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx: Correct out of sequence initialization stepLarry Finger
This patch fixes an out of sequence step in the bcm43xx_init_board routine for bcm43xx-softmac. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11[PATCH] bcm43xx-softmac: Init, shutdown and restart fixesLarry Finger
This fixes various bugs in the init and shutdown code that would lead to lockups and crashes. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11Merge branch 'upstream-fixes' into upstreamJohn W. Linville
2006-09-11[PATCH] zd1211rw: Fix of signal strength and quality measurementUlrich Kunitz
Caused by a documentation issue I mixed up fields of the zd_status structure. This patch fixes it and improves also the average computation, which is now using only measurements of packets sent by the access point. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-09-11Merge branch 'from-linus' into upstreamJohn W. Linville
2006-09-06Merge branch 'upstream' of ↵Jeff Garzik
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream
2006-09-04Merge branch 'master' into upstreamJeff Garzik
2006-08-29[STRIP]: Fix neighbour table refcount leak.Stephen Hemminger
Found by inspection. The STRIP driver does neigh_lookup() but never releases. This driver shouldn't being doing gratuitous arp anyway. Untested, obviously, because of lack of hardware. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-08-29[PATCH] bcm43xx: Set floor of wireless signal and noise at -110 dBmLarry Finger
This patch sets the floor of wireless level (signal) and noise at -110 dBm, which makes them be comatible with RCPI, as discussed by Simon Barber. With this change, bcm43xx-softmac and bcm43xx-d80211 behave the same. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] bcm43xx - set correct value in mac_suspended for ifdown/ifup sequenceLarry Finger
When bcm43xx-softmac is given an ifdown/ifup sequence, the value for bcm->mac_suspended ends up wrong, which leads to a large number of assert(bcm->mac_suspended>=0) messages. This one-line patch fixes this problem. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: Fix compile error when CONFIG_IPW2200_DEBUG is not selectedZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: Update version stamp to 1.1.4Zhu Yi
Update version ipw2200 stamp to 1.1.4 Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: enable wireless extension passive scanZhu Yi
This patch enables the ipw2200 driver to support passive scanning as offered by the wireless extensions. For this, I enhanced the ipw_wx_set_scan function in such a way that it differentiates between a passive and an active scan request. Additionally, I added a new function called ipw_request_passive_scan that is similiar to the ipw_request_scan function to perform passive scans. Last but not least, I added a field (in fact it is a work_struct struct) called request_passive_scan to the ipw_priv struct. Signed-off-by: Thomas King <king@informatik.uni-mannheim.de> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2100: Fix deadlock detected by lockdepZhu Yi
Fix by removing dependency between priv->action_sem and rtnl semaphore. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: Add pci .shutdown handlerZhu Yi
If we don't disable the card in the pci .shutdown method, there might be pending interrupts still in the interrupt line after a reboot on some platform. This patch fixes the problem by disable the hardware in the pci .shutdown method. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: Fix kernel Oops if cmdlog debug is enabledZhu Yi
When command error log debug is enabled, we write every host command and parameters into a buffer. But we didn't alloc the parameter buffer for this case. The patch adds struct cmdlog_host_cmd so that the buffer is allocated from the stack. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: mark "iwconfig retry 255" as invalidZhu Yi
The ipw2200 firmware/ucode only support values from 0 to 254. So mark 255 as invalid. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: remove the MAC timestamp present field from radiotap headZhu Yi
IEEE80211_RADIOTAP_TSFT is defined as the Value in microseconds of the MAC's 64-bit 802.11 Time Synchronization Function timer when the first bit of the MPDU arrived at the MAC. Since ipw2200 hardware doesn't provide this value, we disable this feature from the radiotap header present flag. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: Fix ipw2200 QOS parameters endian issueZhu Yi
Signed-off-by: Jackie Wu <jackie.wu@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: remove unused struct ipw_rx_bufferZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: Reassociate even if set the same essid.Zhu Yi
This patch traps the case when the essid is being set to its current value. If the essid is being set again and we are already associated, chances are some other parameters have also been altered. I think it is safer to do the re-association for this case. Signed-off-by: Bill Moss <bmoss@clemson.edu> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: ipw_wx_set_essid fixZhu Yi
This patch cleanups the ipw_wx_set_essid code and forces a reassociation when setting the essid to "any". I have tested this patch with iwconfig. It makes ipw2200 compliant with all the cases mentioned in the iwconfig man page. The commands iwconfig iface essid any iwconfig iface essid -- any iwconfig iface essid off iwconfig iface essid on all seemed to work correctly. None of this worked before the patch. Note, this patch treats iwconfig iface essid iwconfig iface essid "" The same. It produces an error message: essid: Unknown host. Since an essid of "" is not mentioned in the iwconfig man page. Signed-off-by: Bill Moss <bmoss@clemson.edu> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: SIOCGIWFREQ ioctl returns frequency rather than channelZhu Yi
The SIOCGIWFREQ ioctl fills the request structure's freq field by setting the exponent to 0 and the mantissa to the current channel number. The iwconfig tool works around this behaviour by looking up the frequency from the channel table if a frequency below 1kHz is returned, other tools (e.g. kwlaninfo) don't. According to the comment in the iwconfig source the driver is supposed to return the frequency, not the channel number. Signed-off-by: Ingo van Lil <inguin@gmx.de> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] ipw2200: always enable frequently used debugging codeZhu Yi
Moving part of the debugging code from IPW_DEBUG to IPW_LL_DEBUG (low level debugging) and make IPW_DEBUG be always enabled. IPW_LL_DEBUG still needs to be enabled by selecting CONFIG_IPW2200_DEBUG. But it is highly deprecated for normal users since it adds higher debug verbosity in driver hot paths. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] bcm43xx: return correct hard_start_xmit error codeLarry Finger
hard_start_xmit should return a NETIF_TX_FOO error code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] bcm43xx: optimization of DMA bitfieldsLarry Finger
Convert the bitfields in the bcm43xx DMA code to properly aligned u8 booleans. These flags are accessed in the DMA hotpath, so it's a good idea to waste a few bytes of memory for the sake of speed by not requiring masking (and probably shifting) of the bitfields. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] orinoco: include linux/if_arp.h directlyPavel Roskin
Don't rely on linux/if_arp.h being included by other headers Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] orinoco: Don't use "extern inline" on locking functionsPavel Roskin
SPARC architecture has been fixed, so it's no longer needed. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] bcm43xx: re-add bcm43xx_rng_init() callMichael Buesch
Calls to bcm43xx_rng_init() and bcm43xx_rng_exit() got lost due to merge trouble. Re-add them. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] bcm43xx: >1G and 64bit DMA supportMichael Buesch
This is a rewrite of the bcm43xx DMA engine. It adds support for >1G of memory (for chips that support the extension bits) and 64-bit DMA (for chips that support it). Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-29[PATCH] kthread: airo.cSukadev Bhattiprolu
The airo driver is currently caching a pid for later use, but with the implementation of containers, pids themselves do not uniquely identify a task. The driver is also using kernel_thread() which is deprecated in drivers. This patch essentially replaces the kernel_thread() with kthread_create(). It also stores the task_struct of the airo_thread rather than its pid. Since this introduces a second task_struct in struct airo_info, the patch renames airo_info.task to airo_info.list_bss_task. As an extension of these changes, the patch further: - replaces kill_proc() with kthread_stop() - replaces signal_pending() with kthread_should_stop() - removes thread completion synchronisation which is handled by kthread_stop(). [akpm@osdl.org: fix races] Signed-off-by: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Javier Achirica <achirica@gmail.com> Cc: Christoph Hellwig <hch@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-24Merge branch 'upstream-fixes' into upstreamJeff Garzik
2006-08-23Merge branch 'upstream-fixes' into upstreamJohn W. Linville
2006-08-23[PATCH] hostap: Restore antenna selection settings after port resetPavel Roskin
Intersil firmware 1.7.4 (and possibly others) loses the antenna selection settings when the port is reset. Signed-off-by: David Acker <dacker@roinet.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-23[PATCH] spectrum_cs: Fix incorrect use of pcmcia_dev_present()Pavel Roskin
This bug was introduced during the PCMCIA API conversion and broke spectrum_cs completely. Tracked down by Fredrik Tolf <fredrik@dolda2000.com> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-19drivers/net: Remove deprecated use of pci_module_init()Jeff Garzik
From: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Michal Piotrowski <michal.k.k.piotrowski@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-14[PATCH] ray_cs: Remove dependency on ieee80211Michael Wu
This patch removes the dependency on ieee80211.h from the ray_cs driver. ray_cs only needs iw_handler.h. Signed-off-by: Michael Wu <flamingice@sourmilk.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: cleanupsUlrich Kunitz
Add static to 2 internal functions. Thanks goes to Adrian Bunk, who found that. Also made some modifications to the clear functions: After a discussion on the mailing list, I implemented this code to have on the one hand sufficient test in debug mode, but on the other hand reduce the overhead for structure clearing to a minimum. A new macro ZD_MEMCLEAR is introduced, which produces code if DEBUG is set. Locks are not set anymore for structure clearing, but in debug mode, there is a verification, that the locks have not been set. Finally, removed a misleading comment regarding locking in the disconnect path. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: USB id 1582:6003 for Longshine 8131G3 addedUlrich Kunitz
The Longshine device is a ZD1211B and has a AL2230 RF. I tested it successfully with no encryption and WEP. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: Convert installer CDROM device into WLAN deviceDaniel Drake
Some devices identify themselves as a virtual USB CDROM drive. The virtual CD includes the windows driver. We aren't interested in this, so we eject the virtual CDROM and then the real wireless device appears. Patch fixed over the earlier version to not leak cmd, thanks to Michael Buesch for spotting that. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: Add ID for ZyXEL G220FDaniel Drake
zd1211 chip 0586:3402 v4916 high 00-13-49 AL2230_RF pa0 ---- This device pops up after the virtual driver CD has been ejected. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: Firmware version vs bootcode version mismatch handlingDaniel Drake
This is needed for my G220F, otherwise it fails to initialize after the existing firmware upload routine. The vendor driver actually does more than what I have done here: it downloads the firmware + boot code, modifies it, and uploads it again (really messy). I have not copied that part over, as my device can get on its feet without it. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-08-14[PATCH] zd1211rw: Add ID for Allnet ALLSPOT Hotspot finderDaniel Drake
Tested by Wonka on IRC. zd1211 chip 157e:3204 v4810 high 00-11-e0 AL7230B_RF pa0 g--- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 23:38:30 +0000