aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2006-12-02[PATCH] ieee80211: Provide generic get_stats implementationDaniel Drake
bcm43xx and ipw2100 currently duplicate the same simplistic get_stats handler. Additionally, zd1211rw requires the same handler to fix a bug where all stats are reported as 0. This patch adds a generic implementation to the ieee80211 layer, which drivers are free to override. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Use softmac ERP handling functionalityDaniel Drake
This adds zd1211rw driver support for the softmac functionality I added a while back. We now obey changes in basic rates, use short preamble if it is available (but long if the AP says it's not), and send self-CTS in the proper situations. Locking fixed and improved by Ulrich Kunitz. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Rename cs_rate to zd_rateDaniel Drake
These controlset rate constants are also applicable in places outside the controlset, such as in the RTS/CTS control register. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Allow channels 1-13 in JapanDaniel Drake
Eric Goff found that he could not use his ZD1211 device which is programmed for the Japan regulatory domain. It turns out that ZyDAS deviate from the spec here: they do not use the newer Japan region code (0x41) but their drivers do operate as if the newer Japan legal frequency range is in effect. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Optimized handling of zero length entries in length infoUlrich Kunitz
There are a high number of split USB transactions, which contain only one packet but have a length info field. This patch optimizes this code by stopping parsing the length info structure if a zero length field is encountered. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: cleanupsUlrich Kunitz
Bit-field constants in zd_chip.h are now defined using a shift expression. The value 0x08 is now (1 << 3). The fix is intended to improve readability. Remove misleading comment in zd_mac.c: The function already returns -EPERM in managed mode (IW_MODE_INFRA). Remove unused code in zd_mac.c: The unused code intended for debugging rx_status values is no longer useful. Added dump_stack() to ZD_ASSERT macro: Output of the stack helps to debug assertions. Keep in mind that the ZD_ASSERT() macro only results in code, if DEBUG is defined. Improved comments for filter_rx() zd_usb.c: Added driver name to module init and exit functions Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Remove IW_FREQ_AUTO supportDaniel Drake
http://bugzilla.kernel.org/show_bug.cgi?id=7399 zd1211rw's support for IW_FREQ_AUTO is broken: when specified, the driver tries to change to a channel specified in an uninitialized integer. As IW_FREQ_AUTO is hard to implement properly, the solution (at least for now) is to drop support for it and start ignoring the flags like all other wireless drivers do. This has the added advantage that kismet also starts working with zd1211rw, even though kismet requesting IW_FREQ_AUTO is also a bug (fixed in their svn) Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Add ID for Belkin F5D7050 v4000Daniel Drake
zd1211b chip 050d:705c v4810 high 00-17-3f AL2230_RF pa0 g--N Tested by Bryan Barnard Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Add ID for Planex GW-US54MiniDaniel Drake
zd1211 chip 14ea:ab13 v4330 high 00-90-cc AL2230_RF pa0 g--- Tested by Tetsuya Yatagai. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] prism54: correct overly aggressive check of return from pci_set_mwiJohn W. Linville
Failure of pci_set_mwi should not be considered a fatal error. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] bcm43xx: correct "Move IV/ICV stripping into ieee80211_rx"Larry Finger
In the patch sent by Daniel Drake under the title "[PATCH] ieee80211: Move IV/ICV stripping into ieee80211_rx", a needed line was accidentally removed. (NOTE: I'm pretty sure this was my fault, not Daniel's. -- JWL) Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] wireless: clean-up some "check return code" warningsJohn W. Linville
Clean-up some warnings from missing return code checks, mostly from calling pci_enable_device during a PCI resume. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] bcm43xx: Remove useless core enable/disable messagesLarry Finger
In the softmac version of bcm43xx, the core scan logs whether each core is enabled or disabled. This information is useless as one of the next steps is to enable all cores. This patch removes this output from the log. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] bcm43xx: remove badness variable and related routineLarry Finger
When the periodic work function in bcm43xx was converted for voluntary preemption to reduce latency, a new function was created to estimate the "badness" of each step, and this quantity was used to determine if preemption should be enabled when periodic work was undertaken. This concept was quite useful while debugging of periodic work was in progress. Now that this routine seems to be working correctly, it is time to simplify the code. This patch keeps the functionality intact, but simplifies the code. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] kmemdup() cleanup in drivers/netEric Sesterhenn
hi, replace open coded kmemdup() to save some screen space, and allow inlining/not inlining to be triggered by gcc. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-12-02[PATCH] zd1211rw: Add ID for ZyXEL G-220Daniel Drake
Tested by Newsome on IRC zd1211 chip 0586:3401 v4330 high 00-13-49 AL2230_RF pa0 g--- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] bcm43xx: add PCI-E codeStefano Brivio
The current bcm43xx driver does not contain code to handle PCI-E interfaces such as the BCM4311 and BCM4312. This patch, originally written by Stefano Brivio adds the necessary code to enable these interfaces. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] prism54: use BUILD_BUG_ONAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] atmel: output signal strength informationHolden Karau
Output signal strength information as part of iwlist scan - before it did not output any signal strength related information. Signed-off-by: Holden Karau <holden@pigscanfly.ca> Cc: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] prism54: whitespace cleanupDmitry Torokhov
NET: prism54 - whitespace cleanup Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] prism54: fix potential race in reset schedulingDmitry Torokhov
NET: prism54 - fix potential race in reset scheduling There appears to be a race in reset scheduling logic - thread responsible for reseting the interface should clear "reset pending" flag before restarting the queue, otherwise timeout handler might not schedule another reset even if it is needed. This race is mostly theoretical as far as I can see but a race nonetheless. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] atmel: whitespace cleanupDmitry Torokhov
NET: atmel: whitespace cleanup Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] atmel: use ARRAY_SIZE()Dmitry Torokhov
NET: atmel - switch to using ARRAY_SIZE() Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] atmel: save on array initializationDmitry Torokhov
NET: atmel - do not initialize array over and over again Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] ieee80211: Move IV/ICV stripping into ieee80211_rxDaniel Drake
This patch adds a host_strip_iv_icv flag to ieee80211 which indicates that ieee80211_rx should strip the IV/ICV/other security features from the payload. This saves on some memmove() calls in the driver and seems like something that belongs in the stack as it can be used by bcm43xx, ipw2200, and zd1211rw I will submit the ipw2200 patch separately as it needs testing. This patch also adds some sensible variable reuse (idx vs keyidx) in ieee80211_rx Signed-off-by: Daniel Drake <dsd@gentoo.org> Acked-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] zd1211rw: Add 3 more device IDsDaniel Drake
iNexQ UR055g: Tested by Todor T Zviskov zd1211 chip 1435:0711 v4330 high 00-10-a7 AL2230_RF pa0 g-- ZyXEL AG-225, FCC ID SI5WUB410: Tested by Nathan zd1211 chip 0586:3409 v4810 full 00-13-49 AL7230B_RF pa0 g--- Yakumo QuickWLAN USB: Tested by EdB zd1211 chip 0b3b:1630 v4330 high 00-01-36 RF2959_RF pa0 --- Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-02[PATCH] bcm43xx: output proper link quality with scansLarry Finger
The bcm43xx-softmac driver fails to set two quantities needed for iwlist to compute wireless quality when scanning. As a result, userland programs using the quality to determine the best connection fail. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-12-01Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: [PATCH] Fix an offset error when reading the CS89x0 ADD_PORT register [PATCH] spidernet: poor network performance [PATCH] Spidernet: remove ETH_ZLEN check in earlier patch [PATCH] bonding: fix an oops when slave device does not provide get_stats [PATCH] drivers/net: SAA9730: Fix build error Revert "[PATCH] zd1211rw: Removed unneeded packed attributes" [PATCH] zd1211rw: Fix of a locking bug [PATCH] softmac: remove netif_tx_disable when scanning [PATCH] ieee80211: Fix kernel panic when QoS is enabled
2006-12-01Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/usb-2.6: (103 commits) usbcore: remove unused argument in autosuspend USB: keep count of unsuspended children USB hub: simplify remote-wakeup handling USB: struct usb_device: change flag to bitflag OHCI: make autostop conditional on CONFIG_PM USB: Add autosuspend support to the hub driver EHCI: Fix root-hub and port suspend/resume problems USB: create a new thread for every USB device found during the probe sequence USB: add driver for the USB debug devices USB: added dynamic major number for USB endpoints USB: pegasus error path not resetting task's state USB: endianness fix for asix.c USB: build the appledisplay driver USB serial: replace kmalloc+memset with kzalloc USB: hid-core: canonical defines for Apple USB device IDs USB: idmouse cleanup USB: make drivers/usb/core/driver.c:usb_device_match() static USB: lh7a40x_udc remove double declaration USB: pxa2xx_udc recognizes ixp425 rev b0 chip usbtouchscreen: add support for DMC TSC-10/25 devices ...
2006-12-01usb: zd1201 free urb cleanupMariusz Kozlowski
- usb_free_urb() cleanup Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-11-30Fix misc .c/.h comment typosMatt LaPlante
Fix various .c/.h typos in comments (no code changes). Signed-off-by: Matt LaPlante <kernel1@cyberdogtech.com> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-11-28Revert "[PATCH] zd1211rw: Removed unneeded packed attributes"John W. Linville
This reverts commit 4e1bbd846d00a245dcf78b6b331d8a9afed8e6d7. Quoth Daniel Drake <dsd@gentoo.org>: "A user reported that commit 4e1bbd846d00a245dcf78b6b331d8a9afed8e6d7 (Remove unneeded packed attributes) breaks the zd1211rw driver on ARM." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-11-28[PATCH] zd1211rw: Fix of a locking bugUlrich Kunitz
This patch fixes the bug as reported in the kernel bug tracker under the id 7244. The bug was simply that the interrupt lock has been locked outside an interrupt without blocking the interrupt. Signed-off-by: Ulrich Kunitz <kune@deine-taler.de> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-11-07[PATCH] bcm43xx: Add error checking in bcm43xx_sprom_write()Adrian Bunk
The Coverity checker noted that these "if (err)"'s couldn't ever be true. It seems the intention was to check the return values of the bcm43xx_pci_write_config32()'s? Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-11-07[PATCH] bcm43xx: Drain TX status before starting IRQsMichael Buesch
Drain the Microcode TX-status-FIFO before we enable IRQs. This is required, because the FIFO may still have entries left from a previous run. Those would immediately fire after enabling IRQs and would lead to an oops in the DMA TXstatus handling code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-31[PATCH] bcm43xx: fix unexpected LED control values in BCM4303 spromLarry Finger
The bcm43xx driver uses 4 locations in the devices sprom to determine the behavior of the leds. Certain defaults are assigned if all bits are set in those locations. On at least one BCM4303 chip, the sprom contains values other than the default, which executes an assertion placed in the default case of a following switch statement. This patch makes the leds on the above mentioned interface behave correctly. In addition, it limits the number of logged messages to 20 for the case of unexpected values in the sprom locations. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-31[PATCH] bcm43xx: Fix low-traffic netdev watchdog TX timeoutsMichael Buesch
This fixes a netdev watchdog timeout problem. The software needs to call netif_tx_disable before running the hardware calibration code. The problem condition can be shown by the following timegraph. |---5secs - ~10 jiffies time---|---|OOPS ^ ^ last real TX periodic work stops netif At OOPS, the following happens: The watchdog timer triggers, because the timeout of 5secs is over. The watchdog first checks for stopped TX. _Usually_ TX is only stopped from the TX handler to indicate a full TX queue. But this is different. We need to stop TX here, regardless of the TX queue state. So the watchdog recognizes the stopped device and assumes it is stopped due to full TX queues (Which is a _wrong_ assumption in this case). It then tests how far the last TX has been in the past. If it's more than 5secs (which is the case for low or no traffic), it will fire a TX timeout. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-31[PATCH] hostap_plx: fix CIS verificationPavel Roskin
The length of the manfid CIS should be at least 4, and it's normally 4. It's incorrect to require it to be at least 5. This breaks support for most (if not all) cards. The right place to ensure that we don't access beyond the CIS buffer is to strengthen another check. Make sure that the next tuple begins at least at the CIS buffer end (in which case we stop processing) or before that. Reported by ph35sm@free.fr Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-25[PATCH] pcmcia: add more IDs to hostap_cs.cDominik Brodowski
As a replacement for the broad manufactor/card ID match we commented out because of conflicts with pcnet_cs, add two product ID matches. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2006-10-24[PATCH] missing include of dma-mapping.hAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-17[PATCH] zd1211rw: fix build-break caused by association race fixJohn W. Linville
The break was caused by 7c28ad2d83ecc637237fe684659a6afbce0bb2a8. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] airo: check if need to freezeDave Kleikamp
The airo driver used to break out of while loop if there were any signals pending. Since it no longer checks for signals, it at least needs to check if it needs to be frozen. Signed-off-by: Dave Kleikamp <shaggy@austin.ibm.com> Cc: Jean Tourrilhes <jt@hpl.hp.com> Cc: Sukadev Bhattiprolu <sukadev@us.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] wireless: More WE-21 potential overflows...Jean Tourrilhes
After the Orinoco issue, I did an audit of other drivers for the same issue. Three drivers were NULL terminating the ESSID, which could cause an overflow in WE-21 when the ESSID has maximum size. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] zd1201: Possible NULL dereferenceEric Sesterhenn
If we enter the if(!zd) and set free to 1, we dereference zd in the exit code. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] orinoco: fix WE-21 buffer overflowJean Tourrilhes
This patch fixes the Orinoco driver overflow issue with WE-21. Cc: Valdis Kletnieks <Valdis.Kletnieks@vt.edu> Cc: Pavel Roskin <proski@gnu.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] airo.c: check returned valuesFlorin Malita
create_proc_entry() can fail and return NULL in setup_proc_entry(), the result must be checked before dereferencing. (Coverity ID 1443) init_wifidev() & setup_proc_entry() can also fail in _init_airo_card(). This adds the checks & cleanup code and removes some whitespace. Signed-off-by: Florin Malita <fmalita@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] bcm43xx-softmac: Fix system hang for x86-64 with >1GB RAMLarry Finger
The bcm43xx-softmac software currently fails when running on x86_64 systems with more than 1GB RAM and one of the card variants with 30-bit DMA addressing. This patch uses the address extension bits in the hardware to set the correct DMA mask for the specific card in use. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] bcm43xx-softmac: check returned value from pci_enable_deviceLarry Finger
Linus's tree now has a configuration option that prints a warning whenever the returned value of any routine is ignored. This patch fixes the only such warning for bcm43xx. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] softmac: Fix WX and association related racesMichael Buesch
This fixes some race conditions in the WirelessExtension handling and association handling code. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-10-16[PATCH] bcm43xx: fix race condition in periodic work handlerMichael Buesch
There is a potential race condition in the periodic_work_handler routine of bcm43xx-softmac. In addition to fixing this condition, the size of code is reduced by moving the mutex lock outside the if. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>