aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2009-08-04libertas: check valid bits in SPI bus mode regAndrey Yurovsky
The SPI driver writes to the bus mode register and performs a sanity check by reading back what we wrote, however only the lower four bits of that register are defined. In some cases, the device side seems to set the higher bits, causing us to fail the sanity check unnecessarily. Check only the lower four bits instead. Thanks to John Goyette from Schick Technologies for pointing out the problem. Signed-off-by: Andrey Yurovsky <andrey@cozybit.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04iwlwifi: remove usage of orig_flagsLuis R. Rodriguez
This is a private flag, internal to cfg80211. cfg80211 will set orig_* stuff internally upon wiphy registration, drivers do not need to muck with it. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rndis_wlan: rework key handlingJussi Kivilinna
Organize key data in private structure better and store WPA keys, so they can be restored as WEP keys. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rndis_wlan: add missing padding to struct rndis_80211_remove_keyJussi Kivilinna
OID_802_11_REMOVE_KEY failed with invalid length error, add missing padding to structure fix this. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rndis_wlan: handle 802.11 indications from deviceJussi Kivilinna
Add handling for 802.11 specific rndis indications. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rndis_host: allow rndis_wlan to see all indicationsJussi Kivilinna
Allow rndis_wlan to see all indications. Currently rndis_host lets rndis_wlan to know about link state changes only, but there is whole set of other 802.11-specific indications that rndis_wlan should handle properly. So rename link_change() to indication() and convert rndis_wlan to use it. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rndis_wlan: add rndis_set/query_oid debuggingJussi Kivilinna
Add better debugging for failed OID queries. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rndis_wlan: set current packet filter to zero on stopJussi Kivilinna
Set current packet filter to zero to block receiving data packets from device. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rndis_wlan: reset device and restore multicast list on rndis_wlan_reset()Jussi Kivilinna
Reset device properly with RNDIS_MSG_RESET in rndis_wlan_reset() and restore multicast list afterwards. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rndis_wlan: clear cfg80211 scan on rndis_wlan_stop()Jussi Kivilinna
Scanning gets stuck if device is stopped when scan is active. Fix by clearing/aborting cfg80211 scan on rndis_wlan_stop(). Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rndis_wlan: stop workers on rndis_wlan_stop() and restore on rndis_wlan_reset()Jussi Kivilinna
Driver doesn't need to poll statistics/link status when stopped. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04usbnet: allow "minidriver" to prevent urb unlinking on usbnet_stopJussi Kivilinna
rndis_wlan devices freeze after running usbnet_stop several times. It appears that firmware freezes in state where it does not respond to any RNDIS commands and device have to be physically unplugged/replugged. This patch lets minidrivers to disable unlink_urbs on usbnet_stop through new info flag. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Cc: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04iwlwifi: don't export symbols not needed in other modulesJohannes Berg
Even with the split into iwlcore/agn/3945 not all symbols that cross file boundaries are needed in other modules, a few are only used within iwlcore, for example. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04mac80211: redefine usage of the mac80211 workqueueLuis R. Rodriguez
The mac80211 workqueue exists to enable mac80211 and drivers to queue their own work on a single threaded workqueue. mac80211 takes care to flush the workqueue during suspend but we never really had requirements on drivers for how they should use the workqueue in consideration for suspend. We extend mac80211 to document how the mac80211 workqueue should be used, how it should not be used and finally move raw access to the workqueue to mac80211 only. Drivers and mac80211 use helpers to queue work onto the mac80211 workqueue: * ieee80211_queue_work() * ieee80211_queue_delayed_work() These helpers will now warn if mac80211 already completed its suspend cycle and someone is trying to queue work. mac80211 flushes the mac80211 workqueue prior to suspend a few times, but we haven't taken the care to ensure drivers won't add more work after suspend. To help with this we add a warning when someone tries to add work and mac80211 already completed the suspend cycle. Drivers should ensure they cancel any work or delayed work in the mac80211 stop() callback. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04at76c50x-usb: remove unneeded flush_workqueue() at usb disconnectLuis R. Rodriguez
This driver only uses the mac80211 workqueue and mac80211 requires us to cancel all work at driver stop. Since we now have the cancels in the right places at stop() we really don't need to flush the mac80211 workqueue so remove it. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath5k: fix CAB queue operationBob Copeland
We need to process tx descriptors for all queues (currently main tx queue and cabq) which may have triggered the TX completion interrupt. Otherwise, the queues can get stuck after sending a few frames. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04orinoco: enable cfg80211 "set_channel" operationHolger Schurig
Signed-off-by: Holger Schurig <hs4233@mail.mn-solutions.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ar9170: remove EXPERIMENTAL markerLuis R. Rodriguez
Cc: Christian Lamparter <chunkeey@web.de> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04b43: Work around mac80211 race conditionLarry Finger
As shown in http://thread.gmane.org/gmane.linux.kernel.wireless.general/36497, mac80211 has a bug that allows a call to the TX routine after the queues have been stopped. This situation will only occur under extreme stress. Although b43 does not crash when this condition occurs, it does generate a WARN_ON and also logs a queue overrun message. This patch recognizes b43 is not at fault and logs a message only when the most verbose debugging mode is enabled. In the unlikely event that the queue is not stopped when the DMA queue becomes full, then a warning is issued. During testing of this patch with one output stream running repeated tcpperf writes and a second running a flood ping, this routine was entered with the DMA ring stopped about once per hour. The condition where the DMA queue is full but the ring has not been stopped has never been seen by me. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath5k: update PCU opmode whenever a new interface is addedBob Copeland
Previously, we would store the operating mode at interface up time, but only update the PCU registers when the next reset happened. The result is that if beacon configuration (ops->bss_info_changed) happens before ops->config, we will program the wrong things into the timer registers. Consequently, beacons won't work in AP mode until after a reset (channel change, scan etc.). This is fragile anyway so just program the opmode as soon as mac80211 gives it to us. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: Remove unused ath9k_hw_intrget()Vasanthakumar Thiagarajan
Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: Maintain monotonicity of PER while going across different phyVasanthakumar Thiagarajan
Monotonicity of packet error rate should be kept when moving from one phy to another (legacy to ht, ht single stream to dual, etc). Current code skips updating per for other phys. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: Update rate control for 11NA HT40 modeVasanthakumar Thiagarajan
Now the lowest rate in 11na ht40 mode is 13.5Mbps this shortens the range when compared to 11na ht20 mode where the lowest rate is 6.5Mbps. To improve the range, make 6.5Mbps as the lowest rate in 11na ht40 mode, this improves the range by approximately 2dB. 11ng ht40 does not have this issue as it also has basic rates (1, 2, 5.5 and 11). Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rt2x00: Fix build error when crypto support is disabledIvo van Doorn
When only rt2400pci or rt2500pci is compiled without any of the other rt2x00 modules, then CONFIG_RT2X00_LIB_CRYPTO will not be enabled. However rt2x00mac_set_tim() implemented within #ifdef CONFIG_RT2X00_LIB_CRYPTO statements while the declaration is placed outside the definition. This results in linking errors as reporte by Ken. rt2x00_set_tim() has nothing to do with crypto, and thus should be moved outside of the #ifdef statements. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04rt2x00: move experimental on kconfig only to rt2800usbLuis R. Rodriguez
These drivers have been around for a while, if there are issues they should be reported. rt2800usb is still a bit flaky though. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04wireless: use menuconfig for WLAN_PRE80211 and WLAN_80211Luis R. Rodriguez
This should make it very clear which are pre-802.11 or not Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath5k: remove EXPERIMENTAL markerLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath: use menuconfig to put ath stuff in its own pageLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath: simplify kconfig dependency and add documentationLuis R. Rodriguez
Make atheros wireless drivers visible when you select "Atheros wirless drivers". Adds links to ath.ko page, and Atheros drivers page on the wiki. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath: depend on cfg80211Luis R. Rodriguez
The ath.ko module itself depends on cfg80211 Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ar9170: remove unneeded flush_workqueue()Luis R. Rodriguez
cancel_delayed_work_sync() and cancel_work_sync() are already being used therefore already waiting for all pending work by the driver to have been completed, no need to flush the mac80211 workqueue. Cc: Christian Lamparter <chunkeey@web.de> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04at76c50x-usb: cancel scan work at stop callbackLuis R. Rodriguez
This should fix suspend as mac80211 expects all work queued to the mac80211 workqueue to be canceled at driver stop(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ar76c50x-usb: cancel promisc work during mac80211 stopLuis R. Rodriguez
We weren't ever cancelling this. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Acked-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: move workqueue cancels to stop callbackLuis R. Rodriguez
We should be cancelling our work at the stop callback since we are borrowing the mac80211 workqueue for our work. As it stands mac80211 expects this for suspend purposes. The ath9k specific virtual wiphy stuff need only be cancelled only when the we have no secondary virtual wiphys. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: move cancel_delayed_work_sync() out of ath_deinit_leds()Luis R. Rodriguez
We do this as we'll be moving the cancel elsewhere later. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-04ath9k: re-order cancelling of work on mac80211 workqueueLuis R. Rodriguez
ath9k uses the mac80211 workqueue for 4 different types of work: * Led blink work * TX hang monitoring work * internal wiphy schedular work * channel change work done for internal wiphy schedular Since the internal wiphy schedular can end up kicking off some channel channel change work we should first cancel the wiphy schedular work and then the channel change work. The TX hang work can be cancelled second since we're going down anyway. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-30Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-07-30Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-3945.h drivers/net/wireless/iwlwifi/iwl-tx.c drivers/net/wireless/iwlwifi/iwl3945-base.c
2009-07-29iwlwifi: debugFs to enable/disable HT40 supportWey-Yi Guy
Add debugfs file to enable/disable HT40(40MHz) channel support. By default, 40MHz is supported if AP can support the function. By echo "1" to "disable_ht40" file, iwlwifi driver will disable the 40MHz support and only allow 20MHz channel. Because the information exchange happen during association time, so enable/disable ht40 channel only can be performed when it is not associated with AP. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29ath9k: remove unused ATH_PCI_VERSIONLuis R. Rodriguez
Our version goes by the kernel release. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: self-contained wext handling where possibleJohannes Berg
Finally! This is what you've all been waiting for! This patch makes cfg80211 take care of wext emulation _completely_ by itself, drivers that don't need things cfg80211 doesn't do yet don't even need to be aware of wireless extensions. This means we can also clean up mac80211's and iwm's Kconfig and make it possible to build them w/o wext now! RIP wext. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine IWESSID handlersJohannes Berg
Since we now have handlers IWESSID for all modes, we can combine them into one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine IWAP handlersJohannes Berg
Since we now have IWAP handlers for all modes, we can combine them into one. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29cfg80211: combine iwfreq implementationsJohannes Berg
Until now we implemented iwfreq for managed mode, we needed to keep the implementations separate, but now that we have all versions implemented we can combine them and export just one handler. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29ath9k: Add debug counters for TXSujith
Location: ath9k/phy#/xmit Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29ath9k: get rid of unnecessary setpower callsGabor Juhos
We are using setpower routines regardless of the current power mode. Don't bother the hardware, if it is not necessary. Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29ath9k: fix race with IEEE80211_CONF_PS checksGabor Juhos
There is a small window where the mac80211 changes the IEEE80211_CONF_PS flag, and then informs the driver about the change. We have a race condition if we are checking the flag in the same time. Avoid it by introducing a local variable, and using that instead of checking the IEEE80211_CONF_PS flag directly. This fix the problem reported by Luis: http://article.gmane.org/gmane.linux.kernel.wireless.general/34363 Changes-licensed-under: ISC Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29ar9170: fix build error when !CONFIG_AR9170_LEDSAlexander Beregalov
Fix this build error when CONFIG_AR9170_LEDS is not set drivers/net/wireless/ath/ar9170/main.c:1296: error: 'struct ar9170' has no member named 'led_work' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29ray_cs: remove bogus NULL check at head of ray_get_wireless_statsJohn W. Linville
Reported-by: Johannes Berg <johannes@sipsolutions.net> Cc: Martin Ettl <ettl.martin@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-29iwlagn: fix sparse warning when compiling without debugReinette Chatre
C [M] drivers/net/wireless/iwlwifi/iwl-core.o drivers/net/wireless/iwlwifi/iwl-core.c:1341: warning: ‘iwl_dump_nic_error_log’ defined but not used Reported-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 05:13:06 +0000