aboutsummaryrefslogtreecommitdiff
path: root/drivers/net/wireless
AgeCommit message (Collapse)Author
2008-11-10rt2x00: Optimize configuration handlingIvo van Doorn
Implement latest changed from mac80211 configuration handling to optmize configuration handling in rt2x00. * Remove set_retry_limit callback function, handled through config() * Move config_antenna to its own callback function, it isn't handled by mac80211 anymore * Use IEEE80211_CONF_CHANGED_* flags and remove manual checks * Removed deprecated short slot setting through config() and put it in config_erp() through which mac80211 now configures it * Remove config_phymode() and move contents to config_erp() since it only managed the basic rates which is now determined by mac80211 through config_erp(). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath5k: update keycache to support TKIP handlingBob Copeland
Newer parts have slots at entry+64 for michael mic and can do WPA-TKIP in hardware. The open-sourced Atheros HAL has code for accessing this portion so now we know how where to put the key material. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath5k: enable hardware encryption for WEPBob Copeland
This change re-enables hardware encryption for ath5k after setting up mac80211 to handle the initialization vectors which happens to make it work. Add a module param (nohwcrypt) to optionally turn it off. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10mac80211: Add a new event in ieee80211_ampdu_mlme_actionSujith
Send a notification to the driver on succesful reception of an ADDBA response, add IEEE80211_AMPDU_TX_RESUME for this purpose. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove internal RX A-MPDU processingSujith
mac80211 has RX A-MPDU reordering support. Use that and remove redundant RX processing within the driver. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Clear HT info on starting the driverSujith
Doing an interface down/up leaves the old HT assoc information, clear it. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove ath_tx_aggr_resp()Sujith
Accessing mac80211's internal state machine is wrong. Will add resumption of a TID in a later patch. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Enable interrupts at the proper placeSujith
config_interface() was the wrong place to enable interrupts when bringing up an interface, move it to ath_open(). Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove unnecessary TSF resetSujith
The TSF is already reset properly via mac80211's callback. Resetting it in config_interface() is not needed. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Streamline attach/detachSujith
Simplify attach and detach routines by consolidating the stop and suspend functions. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove unused function ath_get_currentCountry()Sujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Refactor hw.cSujith
Split hw.c into more manageable files: ani.c calib.c eeprom.c mac.c Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Revamp VAP managementSujith
Remove the internal VAP management routines and embed ath_vap in mac80211's driver private area provided in ieee80211_vif. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Use bitfields to store tid's state in a single variableSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Ensure ath_node is not NULL when updating tx chainmaskSujith
Also, random indentation and whitespace cleanup. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Remove SM Power Save as it is not supported nowSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Revamp transmit control blockSujith
Use the ath_buf instance associated with each tx frame directly and remove all redundant information in ath_tx_control. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Simplify node attach/detach routinesSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: Node cleanupSujith
Start removing the internal node list in ath9k, in preparation for using mac80211's STA list. Remove lists, locks, routines, flags, functions managing nodes in ath9k. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath5k: fix keytable type buglet in ath5k_hw_reset_keyBob Copeland
Be sure we clear out both the mic (if applicable) and the encryption key type. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath5k: Update PCU codeNick Kossifidis
* In set_opmode don't handle antenna settings and preserve other STA_ID1 settings (shouldn't matter because we call it during reset but it makes things cleaner) Also set properly AP/ADHOC indicator flag on CFG while setting AP/ADHOC modes and always enable key search mode. * Properly set BSSID Mask during reset (cache it and reuse it durring set_associd) * Update beacon_init to flush pending BMISS interrupts and handle setting of adhoc beacon ATIM policy flag for ad-hoc mode. Also set TSF to 0 to start TSF increment on AP mode. We need to handle sleep timers for AR5212 there + add support for PCF. * Properly clean MIC key from keytable when TKIP is used (Bob is working on set_key function etc so i leave it for now). Tested on AR5212 (Hainan) and AR5413 and works fine v2 Set PISR on AR5211+ and ISR on AR5210, got to sleep more ;-) Changes-Licensed-under: ISC Signed-Off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10don't use net/ieee80211.hJohannes Berg
Convert all the drivers using net/ieee80211.h to use linux/ieee80211.h. Contains a bugfix in libertas where the SSID parsing could overrun the buffer when the AP sends invalid information. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Dan Williams <dcbw@redhat.com> [airo, libertas] Acked-by: Pavel Roskin <proski@gnu.org> [orinoco] Acked-by: David Kilroy <kilroyd@googlemail.com> [orinoco] Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10iwl3945: remove bogus commentJohannes Berg
I added this comment myself, but it's clearly wrong. I had meant to place it in iwl_mac_add_interface, which at the time didn't honour the MAC address setting, but it does now. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10mac80211: remove SSID driver codeJohannes Berg
Remove the SSID from the driver API since now there is no driver that requires knowing the SSID and I think it's unlikely that any hardware design that does require the SSID will play well with mac80211. This also removes support for setting the SSID in master mode which will require a patch to hostapd to not try. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10adm8211: remove SSID codeJohannes Berg
Since adm8211 currently doesn't implement IBSS mode anyway, it can't be using the SSID. And if/when it does implement IBSS mode, we'll have to see how to make it beacon anyway. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10b43/legacy: remove SSID codeJohannes Berg
The SSID programmed into the device is used by the ucode only to reply to probe requests, a functionality we disable anyway because it doesn't fit with the mac80211/hostapd programming model. Therefore, it isn't useful to program the SSID into device. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10iwlwifi: remove unused essid variableJohannes Berg
Now the essid stuff is unused, so remove it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10iwlwifi: remove implicit direct scanJohannes Berg
When an undirected scan is requested and iwlwifi is not associated but the user has set an SSID (and maybe was associated with that network at some point) then iwlwifi will assume the user wanted to scan for this SSID which seems wrong. Remove this code. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10iwl3945: remove dead codeJohannes Berg
Was wondering about this code since supposedly the firmware will add the SSID element. Turns out it's dead, so remove it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10ath9k: remove useless NULL initialisersJohannes Berg
When I added .set_frag_threshold I didn't realise it was already there which now generated a sparse warning. Therefore, remove the .set_frag_threshold NULL initialiser, and while at it all the other useless ones. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: eliminate warning for uninitialized variable 'tim_len'John W. Linville
drivers/net/wireless/p54/p54common.c: In function ‘p54_tx’: drivers/net/wireless/p54/p54common.c:1058: warning: ‘tim_len’ may be used uninitialized in this function Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: AP & Ad-hoc testingChristian Lamparter
This patch finally adds all necessary code to test Ad-hoc & AP mode with p54. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: put broadcast frames into the right queuesChristian Lamparter
stlc45xx's specs finally brought some light what all the 4 extra queues for. now CAB data and managment frames have their own queue. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: more definitions form lmac_longbow.h and pda.hChristian Lamparter
This patch ports more useful features to p54 - PDR definitions for the synth chips & regulatory domain. - honour IEEE80211_TX_CTL_ASSIGN_SEQ flag, if it's set. - adds some lost mutex_lock & mutex_unlock. - replace two more "magic values" that sneaked past. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10p54: introduce new names for device firmwaresChristian Lamparter
Johannes thought it would have been a good idea to change the firmware names. Note: we still have fallbacks in case our users don't want to "break their running system", but we won't advertise them with MODULE_FIRMWARE. Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-10netdevice libertas: Fix directly reference of netdev->privWang Chen
We have some reasons to kill netdev->priv: 1. netdev->priv is equal to netdev_priv(). 2. netdev_priv() wraps the calculation of netdev->priv's offset, obviously netdev_priv() is more flexible than netdev->priv. But we cann't kill netdev->priv, because so many drivers reference to it directly. OK, becasue Dave S. Miller said, "every direct netdev->priv usage is a bug", and I want to kill netdev->priv later, I decided to convert all the direct reference of netdev->priv first. Different to readonly reference of netdev->priv, in this driver, netdev->priv was changed. I use netdev->ml_priv to replace netdev->priv. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/ath5k/base.c net/8021q/vlan_core.c
2008-11-06iwl3945: fix deadlock on suspendZhu, Yi
This patch fixes iwl3945 deadlock during suspend by moving notify_mac out of iwl3945 mutex. This is a portion of the same fix for iwlwifi by Tomas. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwl3945: do not send scan command if channel count zeroReinette Chatre
Do not send scan command if no channels to scan. This avoids a Microcode error as reported in: http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1650 http://bugzilla.kernel.org/show_bug.cgi?id=11806 http://marc.info/?l=linux-wireless&m=122437145211886&w=2 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwl3945: clear scanning bits upon failureMohamed Abbas
This patch ensures we clear any scan status bit when an error occurs while sending the scan command. It is the implementation of patch: "iwlwifi: clear scanning bits upon failure" for iwl3945. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06ath5k: correct handling of rx status fieldsBob Copeland
ath5k_rx_status fields rs_antenna and rs_more are u8s, but we were setting them with bitwise ANDs of 32-bit values. As a consequence, jumbo frames would not be discarded as intended. Then, because the hw rate value of such frames is zero, and, since "ath5k: rates cleanup", we do not fall back to the basic rate, such packets would trigger the following WARN_ON: ------------[ cut here ]------------ WARNING: at net/mac80211/rx.c:2192 __ieee80211_rx+0x4d/0x57e [mac80211]() Modules linked in: ath5k af_packet sha256_generic aes_i586 aes_generic cbc loop i915 drm binfmt_misc acpi_cpufreq fan container nls_utf8 hfsplus dm_crypt dm_mod kvm_intel kvm fuse sbp2 snd_hda_intel snd_pcm_oss snd_pcm snd_mixer_oss snd_seq_dummy snd_seq_oss arc4 joydev hid_apple ecb snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq snd_timer snd_seq_device usbhid appletouch mac80211 sky2 snd ehci_hcd ohci1394 bitrev crc32 sr_mod cdrom rtc sg uhci_hcd snd_page_alloc cfg80211 ieee1394 thermal ac battery processor button evdev unix [last unloaded: ath5k] Pid: 0, comm: swapper Tainted: G W 2.6.28-rc2-wl #14 Call Trace: [<c0123d1e>] warn_on_slowpath+0x41/0x5b [<c012005d>] ? sched_debug_show+0x31e/0x9c6 [<c012489f>] ? vprintk+0x369/0x389 [<c0309539>] ? _spin_unlock_irqrestore+0x54/0x58 [<c011cd8f>] ? try_to_wake_up+0x14f/0x15a [<f81918cb>] __ieee80211_rx+0x4d/0x57e [mac80211] [<f828872a>] ath5k_tasklet_rx+0x5a1/0x5e4 [ath5k] [<c013b9cd>] ? clockevents_program_event+0xd4/0xe3 [<c01283a9>] tasklet_action+0x94/0xfd [<c0127d19>] __do_softirq+0x8c/0x13e [<c0127e04>] do_softirq+0x39/0x55 [<c0128082>] irq_exit+0x46/0x85 [<c010576c>] do_IRQ+0x9a/0xb2 [<c010461c>] common_interrupt+0x28/0x30 [<f80e934a>] ? acpi_idle_enter_bm+0x2ad/0x31b [processor] [<c02976bf>] cpuidle_idle_call+0x65/0x9a [<c010262c>] cpu_idle+0x76/0xa6 [<c02fb402>] rest_init+0x62/0x64 Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06zd1211rw: Add 2 device IDsDaniel Drake
07fa/1196 Bewan BWIFI-USB54AR: Tested by night1308, this device is a ZD1211B with an AL2230S radio. 0ace/b215 HP 802.11abg: Tested by Robert Philippe Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwlagn: avoid sleep in softirq contextJohn W. Linville
__ieee80211_tasklet_handler -> __ieee80211_rx -> __ieee80211_rx_handle_packet -> ieee80211_invoke_rx_handlers -> ieee80211_rx_h_decrypt -> ieee80211_crypto_tkip_decrypt -> ieee80211_tkip_decrypt_data -> iwl4965_mac_update_tkip_key -> iwl_scan_cancel_timeout -> msleep Ooops! Avoid the sleep by changing iwl_scan_cancel_timeout with iwl_scan_cancel and simply returning on failure if the scan persists. This will cause hardware decryption to fail and we'll handle a few more frames with software decryption. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06iwlwifi: clear scanning bits upon failureMohamed Abbas
In iwl_bg_request_scan function, if we could not send a scan command it will go to done. In done it does the right thing to call mac80211 with scan complete, but the problem is STATUS_SCAN_HW is still set causing any future scan to fail. Fix by clearing the scanning status bits if scan fails. Signed-off-by: Mohamed Abbas <mohamed.abbas@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-06Revert "ath5k: honor FIF_BCN_PRBRESP_PROMISC in STA mode"John W. Linville
Unfortunately, the result was that mac80211 didn't see all the beacons it actually wanted to see. This caused lost associations. Hopefully we can revisit this when mac80211 is less greedy about seeing beacons directly... This reverts commit 063279062a8c530cc90fb77797db16c49c905b26. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-11-03drivers/net: Kill now superfluous ->last_rx stores.David S. Miller
The generic packet receive code takes care of setting netdev->last_rx when necessary, for the sake of the bonding ARP monitor. Drivers need not do it any more. Some cases had to be skipped over because the drivers were making use of the ->last_rx value themselves. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-10-31ath9k: use ETH_P_PAELuis R. Rodriguez
It was being discussed where we would put this, but now it found a home so use its define. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31ath9k: remove useless conditionalBob Copeland
ath9k_hw_keyreset returns true in either branch. Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31orinoco: cache downloadable firmware image in memory for use during resumeAndrey Borzenkov
If card is using downloadable firmware (like Agere 9.x), firmware has to be reloaded during resume. It is not possible to use request_firmware for that, because tasks are still frozen, so request_firmware will just timeout and fail. So cache firmware image in memory for later reuse in ->resume method. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-10-31orinoco: reload firmware on resumeAndrey Borzenkov
On resume card state is likely lost so we have to reload firmware again. Signed-off-by: Andrey Borzenkov <arvidjaar@mail.ru> Acked-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-28 05:51:24 +0000