aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2007-04-02[BNX2]: Fix nvram write logic.Michael Chan
The nvram dword alignment logic was broken when writing less than 4 bytes on a non-aligned offset. It was missing logic to round the length to 4 bytes. The page erase code is also moved so that it is only called when using non-buffered flash for better code clarity. Update version to 1.5.7. Based on initial patch from Tony Cureington <tony.cureington@hp.com>. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-04-01Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4298/1: fix memory barriers for DMA coherent and SMP platforms [ARM] 4295/2: Fix error-handling in pxaficp_ir.c (version 2) [ARM] Fix __NR_kexec_load [ARM] Export dma_channel_active() [ARM] 4296/1: ixp4xx: compile fix [ARM] 4289/1: AT91: SAM9260 NAND flash timing
2007-04-01[ARM] 4295/2: Fix error-handling in pxaficp_ir.c (version 2)Guennadi Liakhovetski
This patch addresses the following issues with the pxa2xx FIr driver: 1. increment overrun error counter and not frame error counter on ICSR1_ROR bit set in ICSR1. 2. drop frames reported with the frame error from the IC. 3. when resetting the receiver and preparing it for the next DMA in pxa_irda_fir_irq() actually clear the Rx FIFO. See description in Table 11-2 in PXA270 Developer's Manual of the RXE bit. Correction added in version 2: clearing the IC Rx FIFO also has to be done in pxa_irda_fir_dma_tx_irq() Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-03-29Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6 * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6: NetXen: Fix hardware access for ppc architecture. sis190: new PHY support atl1: save mac address on remove
2007-03-29[IFB]: Fix crash on input device removalPatrick McHardy
The input_device pointer is not refcounted, which means the device may disappear while packets are queued, causing a crash when ifb passes packets with a stale skb->dev pointer to netif_rx(). Fix by storing the interface index instead and do a lookup where neccessary. Signed-off-by: Patrick McHardy <kaber@trash.net> Acked-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-29NetXen: Fix hardware access for ppc architecture.Linsys Contractor Adhiraj Joshi
NetXen: Fix for hardware access on big endian machine. Signed-off-by: Adhiraj Joshi <adhiraj@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-29sis190: new PHY supportFrancois Romieu
Reported to work on the WinFast 761GXK8MB-RS motherboard. Plain 10/100 Mbps. Signed-off-by: Paul Gibbons <paul@pkami.e7even.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-29atl1: save mac address on removeChris Snook
Some atl1 boards get their MAC address written directly to the register by the BIOS during POST, rather than storing it in EEPROM that's accessible to the driver. If the MAC register on one of these boards is changed and then the module is unloaded, the permanent MAC address will be forgotten until the box is rebooted. We should save the permanent address during removal if we've been messing with it. Signed-off-by: Chris Snook <csnook@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28[BNX2]: Fix link interrupt problem.Michael Chan
bnx2_has_work()'s logic is flawed and can cause the driver to miss a link event. The fix is to compare the status block's attn_bits and attn_bits_ack to determine if there is a link event. Update version to 1.5.6. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-28Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-03-28SUN3/3X Lance trivial fix improvedCyrill V. Gorcunov
This patch adds checking for allocated DVMA memory and granted IRQ line. Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28mv643xx_eth: Fix use of uninitialized port_num fieldGabriel Paubert
In this driver, the default ethernet address is first set by by calling eth_port_uc_addr_get() which reads the relevant registers of the corresponding port as initially set by firmware. However that function used the port_num field accessed through the private area of net_dev before it was set. The result was that one board I have ended up with the unicast address set to 00:00:00:00:00:00 (only port 1 is connected on this board). The problem appeared after commit 84dd619e4dc3b0b1c40dafd98c90fd950bce7bc5. This patch fixes the bug by setting mp->port_num prior to calling eth_port_uc_get_addr(). Signed-off-by: Gabriel Paubert <paubert@iram.es> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28forcedeth: fix tx timeoutAyaz Abdulla
The tx timeout routine was waking the tx queue conditionally. However, it must call it unconditionally since the dev_watchdog has halted the tx queue before calling the timeout function. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28forcedeth: fix nic pollAyaz Abdulla
The nic poll routine was missing the call to the optimized irq routine. This patch adds the missing call for the optimized path. See http://bugzilla.kernel.org/show_bug.cgi?id=7950 for more information. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28qla3xxx: bugfix: Jumbo frame handling.Ron Mercer
Fixed rx checksum bits. Turn on TCP processing for rx checksum. Fixed max frame length register write. It wasn't getting set in multi-port system. Set rx buffer queue length properly for jumbo frames. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28qla3xxx: bugfix: Dropping interrupt under heavy network load.Ron Mercer
Update the rx queue pointer when exiting NAPI poll rather than at the end of each iteration. Remove unnecessary PCI flushes that occurred after every write. Now write all regs and flush once. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28qla3xxx: bugfix: Multi segment sends were getting whacked.Ron Mercer
The proper header length was not being used. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28qla3xxx: bugfix: Add tx control block memset.Ron Mercer
This was removed in a previous patch to increase performance, but caused a transmit error for the 4032 chip. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28atl1: remove unnecessary crc inversionJay Cliburn
The original vendor driver contained a private ether_crc_le() function that produced an inverted crc. When we changed to the kernel version of ether_crc_le(), we neglected to undo the inversion. Let's do it now. Discovered by and patch proffered by Jose Alberto Reguero. Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28myri10ge: correctly detect when TSO should be usedBrice Goglin
Correctly detect when TSO should be used on transmit by looking at the skb->gso_size rather than seeing if the frame was larger than our MTU. The old method causes problems when a host with a large (jumbo) MTU is sending to a host with a small (standard) MTU. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-27[PATCH] bcm43xx: Fix machine check on PPC for version 1 PHYDavid Woodhouse
Recent changes in the specs that were introduced in commit 740ac4fb08866d702be90f167665d03759bd27d0 were incorrect and resulted in machine check errors on the PPC architecture for G PHY's with a revision number equal to 1. The two offending changes are reverted. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-27[PATCH] bcm43xx: fix radio_set_tx_iqStefano Brivio
Fix a duplicated leftshift in bcm43xx_radio_set_tx_iq. data_high values are already leftshifted. Thanks to Michael Buesch for spotting this. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-27[PATCH] bcm43xx: Fix code for confusion between PHY revision and PHY versionLarry Finger
There are several places where the PHY version and revision were interchanged. These are changed in the specifications on 2/13/07 and now use "analog" instead instead of "version" to help reduce confusion. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-26[SUNGEM]: Fix MAC address setting when interface is up.Ruben Vandeginste
This patch implements set_mac_address for the sungem driver. This allows changing the mac address of the interface, even when the interface is up. Signed-off-by: Ruben Vandeginste <snowbender@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[PPP]: Don't leak an sk_buff on interface destruction.G. Liakhovetski
Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[TG3]: Update version and reldate.Michael Chan
Update version to 3.75. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[TG3]: Exit irq handler during chip reset.Michael Chan
On most tg3 chips, the memory enable bit in the PCI command register gets cleared during chip reset and must be restored before accessing PCI registers using memory cycles. The chip does not generate interrupt during chip reset, but the irq handler can still be called because of irq sharing or irqpoll. Reading a register in the irq handler can cause a master abort in this scenario and may result in a crash on some architectures. Use the TG3_FLAG_CHIP_RESETTING flag to tell the irq handler to exit without touching any registers. The checking of the flag is in the "slow" path of the irq handler and will not affect normal performance. The msi handler is not shared and therefore does not require checking the flag. Thanks to Bernhard Walle <bwalle@suse.de> for reporting the problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[TG3]: Eliminate the unused TG3_FLAG_SPLIT_MODE flag.Michael Chan
This flag to support multiple PCIX split completions was never used because of hardware bugs. This will make room for a new flag. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[NET]: remove unused header file: drivers/net/wan/lmc/lmc_media.hRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-24[MIPS] SB1250: Fix bugs/warnings by creative use of volatile.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-23[netdrvr] ewrk3: correct card detection bugJeff Garzik
Arwin Vosselman pointed out: > The ewrk3-driver doesn't function with 2.6.16-kernels (used 2.6.16.41 for > my tests). Cards will never be detected due to this bug. > > drivers/net/ewrks3.c: > Line 417 reads: > > if (nicsr == (CSR_TXD | CSR_RXD)) > > that should be: > > if (nicsr != (CSR_TXD | CSR_RXD)) > > Comparison with the same line in v2.4 shows why: > > 2.4: > if (nicsr == (CSR_TXD | CSR_RXD)){ > > blah, blah > ========== > 2.6: > if (nicsr == (CSR_TXD | CSR_RXD)) > return -ENXIO; > > blah, blah > ========== > > blah,blah will not, but should, be executed in 2.6 with a card being present. > > The fix mentioned above solves this bug. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into tmp
2007-03-23cxgb3 - fix white spaces in drivers/net/KconfigDivy Le Ray
Use tabs instead of white spaces for CHELSIO_T3 entry. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: update driver version to 1.3.0-1.226Brice Goglin
Driver version is now 1.3.0-1.226. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: fix management of >4kB allocated pagesBrice Goglin
Fix management of allocated physical pages when the architecture page size is not 4kB since the firmware cannot cross 4K boundary. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: update wcfifo and intr_coal_delay default valuesBrice Goglin
Update the default value of 2 module parameters: * wcfifo disabled * intr_coal_delay 75us Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: Serverworks HT2100 provides aligned PCIe completionBrice Goglin
[PATCH 1/4] myri10ge: Serverworks HT2100 provides aligned PCIe completion Use the regular firmware on Serverworks HT2100 PCIe ports since this chipset provides aligned PCIe completion. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23mv643xx_eth: add mv643xx_eth_shutdown functionDale Farnsworth
mv643xx_eth_shutdown is needed for kexec. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23SAA9730: Fix large pile of warningsRalf Baechle
The SAA9730 driver doesn't quite grok what the difference between an ioport and memory mapped I/O is. It just happened to work on the one Linux system the SAA9730 happens to spend it's misserable existence on. drivers/net/saa9730.c: In function 'evm_saa9730_enable_lan_int': drivers/net/saa9730.c:68: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:70: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:72: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_disable_lan_int': drivers/net/saa9730.c:78: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:80: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_clear_lan_int': drivers/net/saa9730.c:85: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_block_lan_int': drivers/net/saa9730.c:91: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_unblock_lan_int': drivers/net/saa9730.c:97: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'show_saa9730_regs': drivers/net/saa9730.c:150: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_allocate_buffers': drivers/net/saa9730.c:292: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:295: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:302: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:305: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:312: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_cam_load': drivers/net/saa9730.c:329: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:332: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_mii_init': drivers/net/saa9730.c:369: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:395: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:403: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:410: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:432: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_control_init': drivers/net/saa9730.c:470: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:474: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:478: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:484: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:487: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:490: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:493: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_stop': drivers/net/saa9730.c:505: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:508: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:510: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_dma_init': drivers/net/saa9730.c:536: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_start': drivers/net/saa9730.c:556: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:560: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:564: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:567: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_tx': drivers/net/saa9730.c:590: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_rx': drivers/net/saa9730.c:664: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:729: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_write': drivers/net/saa9730.c:848: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_set_multicast': drivers/net/saa9730.c:943: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:949: warning: passing argument 2 of 'outl' makes integer from pointer without a cast Fixed by using writel instead of outl. 42 warnings less. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23Revert "ucc_geth: returns NETDEV_TX_BUSY when BD ring is full"Li Yang
This reverts commit 18babd38547a042a4bfd4154a014d1ad33373eb0. Michael Barkowski points out that it's wrong, and I agree. The patch causes a problem rather than fixes one after another patch "ucc_geth: Fix BD processing" was applied. Before that patch, current packet should be blocked. However after the patch current packet is ok and we only need to block next. Reported-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - T3B2 pcie config spaceDivy Le Ray
T3B2 does not lose its pcie config space on reset. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - Fix potential MAC hangDivy Le Ray
Under rare conditions, the MAC might hang while generating a pause frame. This patch fine tunes the MAC settings to avoid the issue, allows for periodic MAC state check, and triggers a recovery if hung. Also fix one MAC statistics counter for the rev board T3B2. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - Auto-load FW if mismatch detectedDivy Le Ray
The driver attempts to upgrade the FW if the card has the wrong version. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - fix ethtool cmd on multiple queues portDivy Le Ray
Limit ethtool -g/-G to the given port's queues. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23Fix return code in pci-skeleton.cAnton Blanchard
We assign the return value of register_netdev to i, but return rc later on. Fix it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: use per-port phy lockingStephen Hemminger
Rather than a workqueue and a per-board mutex to control PHY, use a tasklet and spinlock. Tasklet is lower overhead and works just as well for this. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: mask irqs when device downStephen Hemminger
Wheen a port on the skge driver is not used, it should mask off interrupts from theat port. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: deadlock on tx timeoutStephen Hemminger
The skge driver will deadlock if gets a transmit timeout because the netif_tx_lock() is already held. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-20[IrDA]: Delay needed when uploading firmware chunksNigel Williams
With 42101001.sb firmwares, we need a 10 ms delay between firmware chunks upload on irda-usb. Patch from Nigel Williams <nigelw@elder-gods.net> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-16[PATCH] airo: Fix an error path memory leakMichal Schmidt
The airo driver leaks memory if request_irq() fails. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-16 22:42:19 +0000