aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-03-25Merge branch 'upstream-net26' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-03-26gianfar: Fix Rx/Tx HW interrupt coalescing counter reset procedure.Andy Fleming
- Fix Rx/Tx HW interrupt coalescing counter reset logic. Disabling is required before resetting the counter. - Update the Default both Rx and Tx coalescing timer threshold. Formerly 4 is set which is equal to 1.5 frame at the line rate of 1GbE interface, and it doesn't match to the coalescing frame count which is set to 16. Threashold 21 is matched to frame count 16. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26gianfar: Only process completed framesAndy Fleming
If the LAST bit is not set in the RxBD, it's possible we're processing an incomplete frame, which is bad. While we're at it, add a constant for the error bitmask, so the whole if-clause fits on one line, and is more legible. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26gianfar: Fix frame size calculation when hardware VLAN acceleration is onDai Haruki
In gfar_change_mtu(), the frame size needs to be increased to account for the extra 4 bytes VLAN adds to the ethernet header. However, it was being increased by the length of the whole header (18 bytes), which is wrong. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26gianfar: Fix the data buffer stashing amountDai Haruki
- Buffer stashing parameter change to 96 from 64 in order to cover the Layer 4 header. Signed-off-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26Use single_open instead of manual manipulations.Pavel Emelyanov
The code opening proc entry for each device makes the same thing, as the single_open does, so remove the unneeded code. Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26phy/broadcom: add support for BCM5481 PHYAnton Vorontsov
This patch adds support for BCM5481 PHY. Unfortunately it's hard to get specifications for this PHY, so its special register 0x18 isn't annotated properly (but we know it's used to set up the delays). I've kept the magic numbers, so we'll not forget to fix it at the first opportunity, and will name that register and its bits correctly. p.s. also fixed the line with broken indention, introduced by commit 03157ac31eb4a8883382a212b161d2e6c5059fbf PHYLIB: Add BCM5482 PHY support Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26qla3xxx: convert byte order of constant instead of variableMarcin Slusarz
Convert byte order of constant instead of variable which can be done at compile time (vs run time) Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Acked-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26drivers/net/mv643xx_eth.c: Use FIELD_SIZEOFJulia Lawall
Robert P.J. Day proposed to use the macro FIELD_SIZEOF in replace of code that matches its definition. The modification was made using the following semantic patch (http://www.emn.fr/x-info/coccinelle/) // <smpl> @haskernel@ @@ #include <linux/kernel.h> @depends on haskernel@ type t; identifier f; @@ - (sizeof(((t*)0)->f)) + FIELD_SIZEOF(t, f) @depends on haskernel@ type t; identifier f; @@ - sizeof(((t*)0)->f) + FIELD_SIZEOF(t, f) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26Add support the Korina (IDT RC32434) Ethernet MACFlorian Fainelli
This patch adds support for the IDT rc32434 Ethernet MAC we can find in the IDT boards and the Mikrotik RB500. Driver references some code from the linux-mips RB500 support. Signed-off-by: Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: Philip Rischel <rischelp@idt.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26forcedeth: Use round_jiffies for stats timerDaniel Drake
This timer doesn't need to run at precise times, so round it to a whole second to decrease wakeups. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26s2io annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26endianness annotations: rndisAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26annotate cxgb3 (ab)uses of skb->priority/skb->csumAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26skfp annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26misc drivers/net annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ni52: more unbreakingAl Viro
missed read*/write* plus a bunch of wrong-sized ones... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ni52: switch to ioremap()Al Viro
isa_bus_to_virt() is the wrong thing to do here; it happens to work on i386, but only by accident. What we want is normal ioremap/readb/etc. set - it's all in iomem. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ni52: clean up check586()Al Viro
take iscp-based testing into helper, kill the loop, stop wanking with reassignments of priv->iscp Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ni52: clean up initialization of privAl Viro
* initialize spinlock once * check586() used to be done before we'd allocated ->priv; these days it's there from the very beginning, so we don't have to play with private copy. Consequently, we don't need to mess with reinitializing ->base, etc. afterwards. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ni52: make ->base char __iomem *Al Viro
... and store the virt address where we map the ->mem_addr, while we are at it. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ni52: kill the second argument of check586(), get rid of bogus pointerAl Viro
Passing ISA bus address explicitly cast to char * only to cast it back to unsigned long is dumb; so's passing it at all when it's always dev->mem_start... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ni52: unbreak scp_structAl Viro
unsigned short != u8, it's u16... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ni52 trivial iomem annotationsAl Viro
Driver is still broken, though; partially from Alan's checkpatch-induced fun, partially from layers of ancient mess ;-) By the end of the series... hell, might be even worth trying to stick such card into old alpha or ppc with an ISA slot and see if it work - would be for the first time ever in case of alpha and for the first time since at least 2.5.3 in case of ppc... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ixgb: remove irq_semJesse Brandeburg
ixgb can remove irq_sem by auditing all the call sites to make sure that each of them makes sure the adapter is in the correct state before re-enabling interrupts. after doing this to all of our other drivers it is becoming easier. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26e1000: remove irq_semJesse Brandeburg
irq_sem was just a hack to prevent interrupts from being enabled unexpectedly in deep call paths. Simply finding those call paths and fixing them by hand results in a driver that behaves as we expect and doesn't need the atomic at all. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26e1000e: remove irq_semJesse Brandeburg
irq_sem can safely be removed by auditing all irq.*able sites to make sure that interrupts don't get enabled unexpectedly when the interface is down. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26e1000e: remove no longer used e1000e_read_nvm_spiAuke Kok
This function is no longer used now that 82573 uses the eerd read method as well. Thanks to Adrian Bunk for pointing this out. Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ixgb: move externs out of .c filesAuke Kok
Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ixgb: convert boolean_t to boolJoe Perches
> send me a patch for e1000 and for ixgb and I'll happily apply those :) boolean_t to bool TRUE to true FALSE to false Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26ixgb: add explicit state checkingJesse Brandeburg
In order to remove the irq_sem code we need to implement strict adapter state checking to prevent accidental double up or downs or resets. This code is largely copied from e1000/e1000e. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-26e1000: Convert boolean_t to boolJoe Perches
On Thu, 2008-03-06 at 10:07 -0800, Kok, Auke wrote: > send me a patch for e1000 and for ixgb and I'll happily apply those :) boolean_t to bool TRUE to true FALSE to false comment typo ahread to ahead Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-03-25Merge branch 'net-2.6.26-netns-20080326' of ↵David S. Miller
git://git.linux-ipv6.org/gitroot/yoshfuji/linux-2.6-dev
2008-03-25rt2x00: Fix in_atomic() usageIvo van Doorn
rt73usb and rt2500usb used in_atomic to determine if a configuration step should be rescheduled or not. Since in_atomic() is not a valid method to determine if sleeping is allowed we should fix the way this is handled by adding a new flag to rt2x00. In addition mark LED class support for the drivers broken since that also uses the broken in_atomic() method but so far no solution exists to have LED triggers work only in scheduled context. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25rt2x00: Fix rate detection for invalid signalsIvo van Doorn
It has been observed on rt2500pci hardware that some frames received with signal 0x0C do not have the OFDM flag set. Signals can have 2 meanings: 1) The PLCP value 2) The bitrate * 10 For rt2500pci (1) is for frames received with a OFDM rate, and (2) is for frames received with a CCK rate. But 0x0C is a invalid bitrate value but is a valid PLCP value for 54Mbs (obvious OFDM rate). This means that it is possible that the hardware does not set the OFDM bit correctly under all circumstances. This results in rt2x00 failing to detect the rate and mac80211 triggering a WARN_ON() and dropping the frame. To bypass this, print a warning when such a frame is received, and reset the rate to the lowest supported rate for the current band. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25PS3: gelic: Add support for separate cipher selectionMasakazu Mokuno
From version 2.20 of the PS3 system software, the hypervisor allows the guest OSes to specify separate cipher for group and pairwise. Signed-off-by: Masakazu Mokuno <mokuno@sm.sony.co.jp> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25b43: Don't compile N-PHY code when N-PHY is disabledMichael Buesch
There's no need to compile the N-PHY support code, when the N-PHY support is disabled in Kconfig. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Completing the parameter packagingAssaf Krauss
This patch completes the changes regarding the packaging of user parameters. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25ipw2200 annotations and fixesAl Viro
a) a bunch of printks in error-handling assums that ->status is big-endian. b) bitfields trouble c) missing annotations NB: a bunch of structs is declared packed for no good reason, AFAICS. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25rt2x00: Add dev_flags to rx descriptorIvo van Doorn
The rxdone_entry_desc structure contains 3 fields which are always 1 or 0. We can safe 8 bytes by replacing them with a single dev_flags fields which contain the flags for those settings. Additionally we can remove the OFDM flag since it is no longer used since the introduction of the SIGNAL_PLCP flag. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: move host command sending functions to core moduleTomas Winkler
1. Host command sending functions moved from iwl4965-base.c to iwl-hcmd.c in iwlcore module 2. enqueue_hcmd function currently stays in iwl4965-base.c. It is invoked through the new 'utils' field in priv's ops. Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: rename iwl4965_get_channel_info to iwl_get_channel_infoAssaf Krauss
iwl4965_get_channel_info was moved to iwlcore module 4965 needs to be stripped off Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: iwl3945 remove 4965 commandsTomas Winkler
This patch removes 4965 host commands from iwl-3945-commands.h Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi-2.6: enables RX TKIP decryption in HWEmmanuel Grumbach
This patch enables RX TKIP decryption in HW. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi-2.6: enables HW TKIP encryptionEmmanuel Grumbach
This patch add support for TKIP encryption (TX) in HW. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi-2.6: RX status translation to old schemeEmmanuel Grumbach
This patch adds translation for the RX status of an incoming packet. The incoming status has to be translated to the old scheme in order to know if the decryption has been done, MIC failure has occured, TTAK is valid etc... This translation is mandatory for all RX packets when using 5300 and for all HT packets using 4965. Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi-2.6: Cleans up set_key flowEmmanuel Grumbach
This patch cleans up the set_key flow. Rxon with hw encryption bit set is not sent upon each call to set_key. Separation is made between global key (WEP) and dynamic key (TKIP + CCMP and WEP in some cases). Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Probe Flow - Extracting hw and priv initAssaf Krauss
1. Extracting hw and priv initialization from probe function. 2. Moving some initialization functions to core module. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Probe Flow - Performing allocation in a separate functionAssaf Krauss
Performing allocation in a separate function (previously handled in 'probe') Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-03-25iwlwifi: Packing all 4965 parametersAssaf Krauss
This patch defines a package struct for iwlwifi parameters, and uses a single instance of this struct to group all iwl4965 module parameters together. Signed-off-by: Assaf Krauss <assaf.krauss@intel.com> Signed-off-by: Tomas Winkler <tomas.winkler@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 13:16:57 +0000