aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-08-26virtio: net refill on out-of-memoryRusty Russell
If we run out of memory, use keventd to fill the buffer. There's a report of this happening: "Page allocation failures in guest", Message-ID: <20090713115158.0a4892b0@mjolnir.ossman.eu> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-26smc91x: fix compilation on SMPAlexey Dobriyan
Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-25irda/sa1100_ir: fix broken netdev_ops conversionAlexander Beregalov
This patch is based on commit d2f3ad4 (pxaficp-ir: remove incorrect net_device_ops). Do the same for sa1100_ir. Untested. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-25irda/au1k_ir: fix broken netdev_ops conversionAlexander Beregalov
This patch is based on commit d2f3ad4 (pxaficp-ir: remove incorrect net_device_ops). Do the same for au1k_ir. Untested. Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23smc91x: let smc91x work well under netpollDongdong Deng
The NETPOLL requires that interrupts remain disabled in its callbacks. Using *_irq_save()/irq_restore() to replace *_irq_disable()/irq_enable() functions in NETPOLL's callbacks of smc91x, so that it doesn't enable interrupts when already disabled, and kgdboe/netconsole would work properly over smc91x. Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Acked-by: Nicolas Pitre <nico@cam.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23pxaficp-ir: remove incorrect net_device_opsMarek Vasut
This patch fixes broken pxaficp-ir. The problem was in incorrect net_device_ops being specified which prevented the driver from operating. The symptoms were: - failing ifconfig for IrLAN, resulting in SIOCSIFFLAGS: Cannot assign requested address - irattach working for IrCOMM, but the port stayed disabled Moreover this patch corrects missing sysfs device link. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23drivers/net: fixed drivers that support netpoll use ndo_start_xmit()Dongdong Deng
The NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). The use of "A functions set" in the NETPOLL API callbacks causes the interrupts to get enabled and can lead to kernel instability. The solution is to use "B functions set" to prevent the irqs from getting enabled while in netpoll_send_skb(). A functions set: local_irq_disable()/local_irq_enable() spin_lock_irq()/spin_unlock_irq() spin_trylock_irq()/spin_unlock_irq() B functions set: local_irq_save()/local_irq_restore() spin_lock_irqsave()/spin_unlock_irqrestore() spin_trylock_irqsave()/spin_unlock_irqrestore() Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23net: Fix Micrel KSZ8842 Kconfig descriptionAndreas Mohr
Signed-off-by: Andreas Mohr <andi@lisas.de> Acked-by: Richard Röjfors <richard.rojfors.ext@mocean-labs.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-23E100: fix interaction with swiotlb on X86.Krzysztof Hałasa
E100 places it's RX packet descriptors inside skb->data and uses them with bidirectional streaming DMA mapping. Data in descriptors is accessed simultaneously by the chip (writing status and size when a packet is received) and CPU (reading to check if the packet was received). This isn't a valid usage of PCI DMA API, which requires use of the coherent (consistent) memory for such purpose. Unfortunately e100 chips working in "simplified" RX mode have to store received data directly after the descriptor. Fixing the driver to conform to the API would require using unsupported "flexible" RX mode or receiving data into a coherent memory and using CPU to copy it to network buffers. This patch, while not yet making the driver conform to the PCI DMA API, allows it to work correctly on X86 with swiotlb (while not breaking other architectures). Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-21Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-08-21rtl8187: always set MSR_LINK_ENEDCA flag with RTL8187BHerton Ronaldo Krzesinski
RTL8187B always needs MSR_LINK_ENEDCA flag to be set even when it is in no link mode, otherwise it'll not be able to associate when this flag is not set after the change "mac80211: fix managed mode BSSID handling". By accident, setting BSSID of AP before association makes 8187B to successfuly associate even when ENEDCA flag isn't set, which was the case before the mac80211 change. But now the BSSID of AP we are trying to associate is only available after association is successful, and any attempt to associate without the needed flag doesn't work. Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br> Tested-by: Larry Finger <Larry.Finger@lwfinger.net> Acked-by: Hin-Tak Leung <htl10@users.sourceforge.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-20ibm_newemac: emac_close() needs to call netif_carrier_off()Petri Gynther
When ibm_newemac netdev instance is shutdown with "ifconfig down", the netdev interface does not go properly down. netif_carrier_ok() keeps returning TRUE even after "ifconfig down". The problem can be seen when ibm_newemac instances are slaves of a bonding interface. The bonding interface code uses netif_carrier_ok() to determine the link status of its slaves. When ibm_newemac slave is shutdown with "ifconfig down", the bonding interface won't detect any link status change because netif_carrier_ok() keeps returning TRUE. Signed-off-by: Petri Gynther <pgynther@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-19net: fix ks8851 build errorsRandy Dunlap
Fix build errors due to missing Kconfig select of CRC32: ks8851.c:(.text+0x7d2ee): undefined reference to `crc32_le' ks8851.c:(.text+0x7d2f5): undefined reference to `bitrev32' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-18net: Rename MAC platform driver for w90p910 platformWan ZongShun
Due to I modified the corresponding platform device name, so I make the patch to rename MAC platform driver for w90p910 platform. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-18yellowfin: Fix buffer underrun after dev_alloc_skb() failureRoel Kluin
yellowfin_init_ring() needs to clean up if dev_alloc_skb() fails and should pass an error status up to the caller. This also prevents an buffer underrun if failure occurred in the first iteration. yellowfin_open() which calls yellowfin_init_ring() should free its requested irq upon failure. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-08-17orinoco: correct key bounds check in orinoco_hw_get_tkip_ivJohn W. Linville
If key is 4 that is an array out of bounds. Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-15e1000e: fix use of pci_enable_pcie_error_reportingXiaotian Feng
commit 111b9dc5 ("e1000e: add aer support") introduces pcie aer support for e1000e, but it is not reasonable to disable it in e1000_remove but enable it in e1000_resume. This patch enables aer support in e1000_probe. Signed-off-by: Xiaotian Feng <dfeng@redhat.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15e1000e: WoL does not work on 82577/82578 with manageability enabledBruce Allan
With manageability (Intel AMT) enabled via BIOS, PHY wakeup does not get configured on newer parts which use PHY wakeup vs. MAC wakeup which causes WoL to not work. The driver should configure PHY wakeup whether or not manageability is enabled. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Fix locking in init/exit calls.Michael Chan
The slow path ulp_init and ulp_exit calls to the bnx2i driver are sleepable calls and therefore should not be protected using rcu_read_lock. Fix it by using mutex and refcount during these calls. cnic_unregister_driver() will now wait for the refcount to go to zero before completing the call. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Fix locking in start/stop calls.Michael Chan
The slow path ulp_start and ulp_stop calls to the bnx2i driver are sleepable calls and therefore should not be protected using rcu_read_lock. Fix it by using mutex and setting a bit during these calls. cnic_unregister_device() will now wait for the bit to clear before completing the call. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15bnx2: Use mutex on slow path cnic calls.Michael Chan
The slow path calls to the cnic driver are sleepable calls so we cannot use rcu_read_lock(). Use mutex for these slow path calls instead. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Refine registration with bnx2.Michael Chan
Register and unregister with bnx2 during NETDEV_UP and NETDEV_DOWN events. This simplifies the sequence of events and allows locking fixes in the next patch. Signed-off-by: Michael Chan <mchan@broadcom.com> Reviewed-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-15cnic: Fix symbol_put_addr() panic on ia64.Michael Chan
When the cnic driver tries to grab a symbol from bnx2 when bnx2 is running init code, symbol_get() will succeed but symbol_put_addr() will hit BUG() a moment later. module_text_address() fails because bnx2 is still in init code. This is fixed by using symbol_put() instead which does the exact opposite of symbol_get(). Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14pegasus: Add new device ID.Petko Manolov
Add new definition to 'pegasus.h' for support Japanese IO DATA "ETX-US2" USB Ethernet Adapter. PEGASUS_DEV( $B!H(BIO DATA USB ETX-US2$B!I(B, VENDOR_IODATA, 0x092a, DEFAULT_GPIO_RESET | PEGASUS_II ) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14drivers/net: fixed drivers that support netpoll use ndo_start_xmit()Dongdong Deng
The NETPOLL API requires that interrupts remain disabled in netpoll_send_skb(). The use of spin_lock_irq() and spin_unlock_irq() in the NETPOLL API callbacks causes the interrupts to get enabled and can lead to kernel instability. The solution is to use spin_lock_irqsave() and spin_unlock_restore() to prevent the irqs from getting enabled while in netpoll_send_skb(). Call trace: netpoll_send_skb() { -> local_irq_save(flags) ---> dev->ndo_start_xmit(skb, dev) ---> spin_lock_irq() ---> spin_unlock_irq() *******here would enable the interrupt. ... -> local_irq_restore(flags) } Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: Jason Wessel <jason.wessel@windriver.com> Acked-by: Bruce Ashfield <bruce.ashfield@windriver.com> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14via-velocity: Fix test of mii_status bit VELOCITY_DUPLEX_FULLroel kluin
Test whether VELOCITY_DUPLEX_FULL bit is set in mii_status. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-14Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-08-14rt2x00: fix memory corruption in rf cache, add a sanity checkPavel Roskin
Change rt2x00_rf_read() and rt2x00_rf_write() to subtract 1 from the rf register number. This is needed because the rf registers are enumerated starting with one. The size of the rf register cache is just enough to hold all registers, so writing to the highest register was corrupting memory. Add a check to make sure that the rf register number is valid. Signed-off-by: Pavel Roskin <proski@gnu.org> Cc: stable@kernel.org Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-13ixgbe: Fix receive on real device when VLANs are configuredLucy Liu
Traffic received with a priority tag (VID = 0) and non-zero priority value was incorrectly handled by the VLAN packet code path due to a check on zero for the whole VLAN tag instead of just the VID. This patch masked out the priority field when checking the vlan tag for received VLAN packets. Signed-off-by: Lucy Liu <lucy.liu@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13ixgbe: Do not return 0 in ixgbe_fcoe_ddp() upon FCP_RSP in DDP completionYi Zou
We return the ddp->len in ixgbe_fcoe_ddp() to indicate the length of data that have been DDPed. However, it is possible that the length is 0, e.g., for SCSI READ, the FCP_RSP may come back w/ SCSI status 0x28 as Task Set Full with no FCP data for DDP. In ixgbe_fcoe_ddp(), we return 0 to indicate not passing DDPed packets to upper layer. Therefore in the case of ddp->len being 0 upon FCP_RSP, we do not want to return the 0 ddp->len as we want FCP_RSP to be always delivered to the upper layer. This patch fixes this bug by setting rc only if ddp->len is non-zero. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13netxen: free napi resources during detachDhananjay Phadke
o Defer napi resouce allocation to device attach. o Free napi resources and delete napi during detach. This ensures right behavior across firmware reset. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13netxen: remove netxen workqueueAmit Kumar Salecha
o Remove private workqueue in the driver, move all scheduled tasks to keventd workqueues. This makes ports (interfaces) of same / different NIC boards independent, in terms of their link watchdog and reset tasks. o Move quick checks for link status and temperature in timer callback, schedule watchdog task only if link status changed or temperature reached critical threshold. This also fixes deadlock when thermal panic occurs, watchdog work was flushing workqueue that it was sitting on. Signed-off-by: Amit Kumar Salecha <amit@qlogic.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13ixgbe: fix issues setting rx-usecs with legacy interruptsDon Skidmore
Currently setting rx-usecs when the interface is in legacy interrupt mode it is not immediate. We were only setting EITR for each MSIx vector and since this count would be zero for legacy mode it wasn't set until after a reset. This patch corrects that by checking what mode we are in and then setting EITR accordingly. Signed-off-by: Don Skidmore <donald.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-13can: fix oops caused by wrong rtnl newlink usageOliver Hartkopp
For 'real' hardware CAN devices the netlink interface is used to set CAN specific communication parameters. Real CAN hardware can not be created with the ip tool ... The invocation of 'ip link add type can' lead to an oops as the standard rtnl newlink function was called: http://bugzilla.kernel.org/show_bug.cgi?id=13954 This patch adds a private newlink function for the CAN device driver interface that unconditionally returns -EOPNOTSUPP. Signed-off-by: Oliver Hartkopp <oliver@hartkopp.net> Reported-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> CC: Patrick McHardy <kaber@trash.net> CC: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-128139cp: balance dma_map_single vs dma_unmap_single pairFrancois Romieu
The driver always: 1. allocate cp->rx_buf_sz + NET_IP_ALIGN 2. map cp->rx_buf_sz Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-12Revert "libertas: Read buffer overflow"David S. Miller
This reverts commit 57921c312e8cef72ba35a4cfe870b376da0b1b87. On request from John Linville: It has been shown to create a new problem. There is work towards a solution to that one, but it isn't a simple clean-up. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-10ar9170: fix read & write outside array boundsDan Carpenter
queue == __AR9170_NUM_TXQ would cause a bug on the next line. found by Smatch ( http://repo.or.cz/w/smatch.git ). Cc: stable@kernel.org Reported-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-10ar9170usb: fix spurious firmware related messageChristian Lamparter
When ar9170-2.fw was missing, the driver erroneously complained about missing the initialization values file ar9170-1.fw... Signed-off-by: Christian Lamparter <chunkeey@web.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-08-09mlx4_en: Fix read buffer overflow in mlx4_en_complete_rx_desc()roel kluin
If the length is less or equal to frag_prefix_size in the first iteration we write skb_frags_rx[-1] and read from priv->frag_info[-1] Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09zorro8390: Fix read buffer overflow in zorro8390_init_one()roel kluin
Prevent read from cards[-1] when no card was found. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09pcnet32: Read buffer overflowroel kluin
An `options[cards_found]' that equals `sizeof(options_mapping)' is already beyond the array. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09gianfar: keep vlan related state when restartYong Zhang
If vlan has been enabled. ifdown followed by ifup will lost hardware related state. Also remove duplicated operation in gfar_vlan_rx_register(). Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: Dai Haruki <dai.haruki@freescale.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09e1000e: fix potential NVM corruption on ICH9 with 8K bank sizeBruce Allan
The bank offset was being incorrectly calculated on ICH9 parts with a bank size of 8K (instead of the more common 4K bank) which would cause any NVM writes to be done on the wrong address after switching from bank 1 to bank 0. Additionally, assume we are meant to use bank 0 if a valid bank is not detected, and remove the unnecessary acquisition of the SW/FW/HW semaphore when writing to the shadow ram version of the NVM image. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09e1000e: fix acquisition of SW/FW/HW semaphore for ICHx partsBruce Allan
For ICHx parts, write the EXTCNF_CTRL.SWFLAG bit once when trying to acquire the SW/FW/HW semaphore instead of multiple times to prevent the hardware from having problems (especially for systems with manageability enabled), and extend the timeout for the hardware to set the SWFLAG bit. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09ixgbe: Disable packet split only on FCoE queues in 82599Yi Zou
For 82599, packet split has to be disabled for FCoE direct data placement. However, this is only required on received queues allocated for FCoE. This patch adds a per ring flags to indicate if packet split is disabled on a per queue basis, particularly for FCoE, as packet split must be disabled for large receive using direct data placement (DDP). Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09ixgbe: Pass rx_ring directly in ixgbe_configure_srrctl()Yi Zou
Instead of passing the register index of the corresponding rx_ring and find the way back to get to corresponding rx_ring in ixgbe_configure_srrctl(), simplify the function ixgbe_configure_srrctl() by passing the rx_ring into it. Then the register index for that rx_ring is already available from rx_ring->reg_idx. Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09tun: Extend RTNL lock coverage over whole ioctlHerbert Xu
As it is, parts of the ioctl runs under the RTNL and parts of it do not. The unlocked section is still protected by the BKL, but there can be subtle races. For example, Eric Biederman and Paul Moore observed that if two threads tried to create two tun devices on the same file descriptor, then unexpected results may occur. As there isn't anything in the ioctl that is expected to sleep indefinitely, we can prevent this from occurring by extending the RTNL lock coverage. This also allows to get rid of the BKL. Finally, I changed tun_get_iff to take a tun device in order to avoid calling tun_put which would dead-lock as it also tries to take the RTNL lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09fec: fix FEC driver packet transmission breakageGreg Ungerer
Commit f0b3fbeae11a526c3d308b691684589ee37c359b ("FEC Buffer rework") breaks transmission of packets where the skb data buffer is not memory aligned according to FEC_ALIGNMENT. It incorrectly passes to dma_sync_single() the buffer address directly from the skb, instead of the address calculated for use (which may be the skb address or one of the bounce buffers). It seems there is no use converting the cpu address of the buffer to a physical either, since dma_map_single() expects the cpu address and will return the dma address to use in the descriptor. So remove the use of __pa() on the buffer address as well. This patch is against 2.6.30-rc5. This breakage is a regression over 2.6.30, which does not have this problem. Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-08-09atlx: strncpy does not null terminate stringRoel Kluin
strlcpy() will always null terminate the string. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <csnook@redhat.com> Cc: Jie Yang <jie.yang@atheros.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>