aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2005-06-02Automatic merge of ↵Linus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
2005-06-02[NET]: Fix locking in shaper driver.Christoph Hellwig
o use a semaphore instead of an opencoded and racy lock o move locking out of shaper_kick and into the callers - most just released the lock before calling shaper_kick o remove in_interrupt() tests. from ->close we can always block, from ->hard_start_xmit and timer context never Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-06-02[PATCH] drivers/net/hamradio/baycom_epp.c: cleanupsAdrian Bunk
The times when tricky goto's produced better codes are long gone. This patch should express the same in a better way. (Also fixes the final gcc-4.0 x86 compile error) Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-29[TG3]: Fix bug in tg3_load_firmware_cpuMichael Chan
Add tg3_nvram_lock() and tg3_nvram_unlock() calls around tg3_halt_cpu(). It is possible that the bootcode may be loading code from nvram during this call and stopping the cpu without getting the lock may cause uncompleted nvram data to be left in the nvram data register. Subsequent calls to read/write nvram data will fail. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[TG3]: Add interrupt testMichael Chan
This test uses the previously added tg3_test_interrupt() to perform the test. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[TG3]: Add loopback testMichael Chan
The test will loopback one packet in MAC loopback mode and verify the packet data. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[TG3]: Add memory testMichael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[TG3]: Add register testMichael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[TG3]: Add parameter to tg3_haltMichael Chan
Add a reset kind parameter to tg3_halt() so that the RESET_KIND_SUSPEND parameter can be passed to tg3_halt() before doing offline tests. All other calls to tg3_halt() will use the RESET_KIND_SHUTDOWN parameter. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[TG3]: Add link testMichael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[TG3]: Add nvram testMichael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-29[TG3]: Add basic selftest infrastructureMichael Chan
Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-26Automatic merge of ↵Linus Torvalds
rsync://rsync.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
2005-05-26[BNX2]: New Broadcom gigabit network driver.Michael Chan
A new driver bnx2 for Broadcom bcm5706 is available. The patch also includes new 1000BASE-X advertisement bit definitions in mii.h Thanks to David Miller and Jeff Garzik for reviewing and their valuable feedback. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-26[BONDING]: bonding using arp_ip_target may stay down with active path Jay Vosburgh
Correcting the list traversal makes the problem go away. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch tlan
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch sis900
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch veth
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch ns83820
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch natsemi
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch forcedeth
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch airo
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch atmel
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch amd8111
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch pcnet32
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch ixgb
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch e1000
2005-05-25Automatic merge of /spare/repo/netdev-2.6 branch e100
2005-05-24[PATCH] tulip: add return to ULI526X clause in tulip_mdio_writeJohn W. Linville
The 'if' clause for ULI526X in tulip_mdio_write allows for spin_unlock_irqrestore to be called twice for tp->mii_lock. I believe this is caused by the unintentional omission of a return at the end of that clause. This patch adds that return. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-05-23[TG3]: Update driver version.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-23[TG3]: Increase TEST_BUFFER_SIZE to 8K.David S. Miller
This makes the DMA bug workaround test more likely to find the problem on some systems. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-23[TG3]: Update driver version and reldate.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-23[TG3]: Add 5752M device ID.Xose Vazquez Perez
Add 0x1601 as 5752M, it's a 5752 but for mobile PCs. Stolen from Broadcom bcm5700-8.1.55 driver. Someone forgot to add it to tg3 ;-) Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-18[TG3]: In tg3_poll(), resample status_tag after doing work.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-18[TG3]: Refine DMA boundary setting.David S. Miller
Extract DMA boundary bit selection into a seperate function, tg3_calc_dma_bndry(). Call this from tg3_test_dma(). Make DMA test more reliable by using no DMA boundry setting during the test. If the test passes, then use the setting we selected before the test. Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Michael Chan <mchan@broadcom.com>
2005-05-18[TG3]: Set minimal hw interrupt mitigation.David S. Miller
Even though we do software interrupt mitigation via NAPI, it still helps to have some minimal hw assisted mitigation. This helps, particularly, on systems where register I/O overhead is much greater than the CPU horsepower. For example, it helps on NUMA systems. In such cases the PIO overhead to disable interrupts for NAPI accounts for the majority of the packet processing cost. The CPU is fast enough such that only a single packet is processed by each NAPI poll call. Thanks to Michael Chan for reviewing this patch. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-18[TG3]: Add tagged status support.David S. Miller
When supported, use the TAGGED interrupt processing support the chip provides. In this mode, instead of a "on/off" binary semaphore, an incrementing tag scheme is used to ACK interrupts. All MSI supporting chips support TAGGED mode, so the tg3_msi() interrupt handler uses it unconditionally. This invariant is verified when MSI support is tested. Since we can invoke tg3_poll() multiple times per interrupt under high packet load, we fetch a new copy of the tag value in the status block right before we actually do the work. Also, because the tagged status tells the chip exactly which work we have processed, we can make two optimizations: 1) tg3_restart_ints() need not check tg3_has_work() 2) the tg3_timer() need not poke the chip 10 times per second to keep from losing interrupt events Based upon valuable feedback from Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-16[PATCH] wireless: 3CRWE154G72 Kconfig help fixDaniel Andersen
Version 2 of the 3com OfficeConnect 11g Cardbus Card aka 3CRWE154G72 is not supported by the prism54 project. To stop confusion, the kernel documentation should state so as 3com made a good job hiding the version. Signed-off-by: Andrew Morton <akpm@osdl.org> diff -puN drivers/net/wireless/Kconfig~wireless-3crwe154g72-kconfig-help-fix drivers/net/wireless/Kconfig
2005-05-15[PATCH] Typo in tulip driverJiri Benc
This patch fixes a typo in tulip driver in 2.6.12-rc3.
2005-05-15[PATCH] fix PROMISC/bridging in TLAN driverJames Harper
This has been a problem for me for ages. When using bridging, the driver is switched into promiscuous mode before the link init is complete. The init complete routine then resets the promisc bit on the card so the kernel still thinks the card is in promiscuous mode but the card isn't. doh. I think this bug only shows up in bridging when the bridge is started at boot time (or something else that sets promisc at the same time the card was started). If promisc is enabled later it works. Here's a trivial (and hopefully correct) patch that works for me. It just calls the promisc/multicast setup routine after init. Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-05-15[PATCH] {PATCH] Fix IBM EMAC driver ioctl bugGeoff Levand
Fix IBM EMAC driver ioctl bug. I found IBM EMAC driver bug. So mii-tool command print wrong status. # mii-tool eth0: 10 Mbit, half duplex, no link eth1: 10 Mbit, half duplex, no link I can get correct status on fixed kernel. # mii-tool eth0: negotiated 100baseTx-FD, link okZZ eth1: negotiated 100baseTx-FD, link ok Hiroaki Fuse Signed-off-by: Geoff Levand <geoffrey.levand@am.sony.com> for CELF
2005-05-15[PATCH] ns83820 updateBenjamin LaHaise
Changes: - improved DAC ifdefs from Andi Kleen - removal of dead code from Adrian Bunk - fix half duplex collision behaviour
2005-05-15[PATCH] drivers/net/wireless enabled by wrong optionAl Viro
NET_WIRELESS is only a subset of the stuff in drivers/net/wireless; NET_RADIO is what covers all of them. Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk>
2005-05-15[PATCH] tlan: restore deleted module parameters.Stephen Hemminger
The module parameter values got lost in the conversion to the new module_param interface. This should fix it. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Index: tlan/drivers/net/tlan.c ===================================================================
2005-05-15[PATCH] SIS900 must select MIIAdrian Bunk
This patch fixes the following compile error caused by bk-netdev: <-- snip --> ... LD .tmp_vmlinux1 drivers/built-in.o(.text+0x98528): In function `sis900_get_settings': : undefined reference to `mii_ethtool_gset' drivers/built-in.o(.text+0x98538): In function `sis900_set_settings': : undefined reference to `mii_ethtool_sset' drivers/built-in.o(.text+0x98517): In function `sis900_get_link': : undefined reference to `mii_link_ok' drivers/built-in.o(.text+0x98547): In function `sis900_nway_reset': : undefined reference to `mii_nway_restart' make: *** [.tmp_vmlinux1] Error 1 <-- snip --> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Daniele Venzano <venza@brownhat.org>
2005-05-15[PATCH] pcnet32: fix resource leak with loopback testDon Fry
When running the loopback test, resources are not properly released on completion. This patch frees all transmit resources after running the loopback test. Tested on ia32 and ppc64 hardware. Signed-off-by: Don Fry <brazilnut@us.ibm.com>
2005-05-15[PATCH] wireless/airo: WEXT and quality correctionsDan Williams
This patch brings the airo driver into line with the current WEXT specification of signal quality. It also fixes the values used to determine signal quality and level for MPI & PCMCIA 350 cards. It turns out that BSSListRid.rssi was actually in dBm for 350 series cards, and that we can use the normalized signal strength reported by the card as our "quality" value, on a scale of 0 - 100. Since signal level values are in dBm for this driver, max_qual->level MUST be 0, as specified in the WEXT spec. This patch also uses the IW_QUAL constants new in WEXT version 17. Signed-off-by: Dan Williams <dcbw@redhat.com>
2005-05-15[PATCH] Fw: [Bugme-new] [Bug 4482] New: natsemi: incorrect initialization of ↵Herbert Xu
IPv6 Neighbor-discovery multicast On Wed, Apr 13, 2005 at 05:36:42PM +0000, Andrew Morton wrote: > Summary: natsemi: incorrect initialization of IPv6 Neighbor- > discovery multicast I've got a pair of FA312 cards and this problem has bothered me for ages. This has finally prompted me to do something about it :) Turns out that somebody wasn't following the documentation. We were doing 16-bit writes to 32-bit registers which led to some addresses working and others not so lucky. This patch should fix the problem. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
2005-05-15[PATCH] atmel wirelesssimon@thekelleys.org.uk
Below is a one-liner for the atmel wireless driver, just adding another card to the table.
2005-05-15[PATCH] forcedeth: Update error handlingManfred Spraul
Ayaz wrote an update to the error handling for forcedeth (which I modified heavily, thus all bugs are mine): The ERROR4 bit is not a fatal error, it just indicates a mismatch between the actual packet len and the len according to the 802.3 header. The patch adds proper handling. The patch also removes the code that drops all packets with RX_ERROR & (!RX_FRAMINGERR): ERROR4 errors are also not fatal.