aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2007-03-28Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into upstream-fixes
2007-03-28SUN3/3X Lance trivial fix improvedCyrill V. Gorcunov
This patch adds checking for allocated DVMA memory and granted IRQ line. Signed-off-by: Cyrill V. Gorcunov <gorcunov@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28mv643xx_eth: Fix use of uninitialized port_num fieldGabriel Paubert
In this driver, the default ethernet address is first set by by calling eth_port_uc_addr_get() which reads the relevant registers of the corresponding port as initially set by firmware. However that function used the port_num field accessed through the private area of net_dev before it was set. The result was that one board I have ended up with the unicast address set to 00:00:00:00:00:00 (only port 1 is connected on this board). The problem appeared after commit 84dd619e4dc3b0b1c40dafd98c90fd950bce7bc5. This patch fixes the bug by setting mp->port_num prior to calling eth_port_uc_get_addr(). Signed-off-by: Gabriel Paubert <paubert@iram.es> Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28forcedeth: fix tx timeoutAyaz Abdulla
The tx timeout routine was waking the tx queue conditionally. However, it must call it unconditionally since the dev_watchdog has halted the tx queue before calling the timeout function. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28forcedeth: fix nic pollAyaz Abdulla
The nic poll routine was missing the call to the optimized irq routine. This patch adds the missing call for the optimized path. See http://bugzilla.kernel.org/show_bug.cgi?id=7950 for more information. Signed-Off-By: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28qla3xxx: bugfix: Jumbo frame handling.Ron Mercer
Fixed rx checksum bits. Turn on TCP processing for rx checksum. Fixed max frame length register write. It wasn't getting set in multi-port system. Set rx buffer queue length properly for jumbo frames. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28qla3xxx: bugfix: Dropping interrupt under heavy network load.Ron Mercer
Update the rx queue pointer when exiting NAPI poll rather than at the end of each iteration. Remove unnecessary PCI flushes that occurred after every write. Now write all regs and flush once. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28qla3xxx: bugfix: Multi segment sends were getting whacked.Ron Mercer
The proper header length was not being used. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28qla3xxx: bugfix: Add tx control block memset.Ron Mercer
This was removed in a previous patch to increase performance, but caused a transmit error for the 4032 chip. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28atl1: remove unnecessary crc inversionJay Cliburn
The original vendor driver contained a private ether_crc_le() function that produced an inverted crc. When we changed to the kernel version of ether_crc_le(), we neglected to undo the inversion. Let's do it now. Discovered by and patch proffered by Jose Alberto Reguero. Signed-off-by: Jose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: Jay Cliburn <jacliburn@bellsouth.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-28myri10ge: correctly detect when TSO should be usedBrice Goglin
Correctly detect when TSO should be used on transmit by looking at the skb->gso_size rather than seeing if the frame was larger than our MTU. The old method causes problems when a host with a large (jumbo) MTU is sending to a host with a small (standard) MTU. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-27[PATCH] bcm43xx: Fix machine check on PPC for version 1 PHYDavid Woodhouse
Recent changes in the specs that were introduced in commit 740ac4fb08866d702be90f167665d03759bd27d0 were incorrect and resulted in machine check errors on the PPC architecture for G PHY's with a revision number equal to 1. The two offending changes are reverted. Signed-off-by: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-27[PATCH] bcm43xx: fix radio_set_tx_iqStefano Brivio
Fix a duplicated leftshift in bcm43xx_radio_set_tx_iq. data_high values are already leftshifted. Thanks to Michael Buesch for spotting this. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-27[PATCH] bcm43xx: Fix code for confusion between PHY revision and PHY versionLarry Finger
There are several places where the PHY version and revision were interchanged. These are changed in the specifications on 2/13/07 and now use "analog" instead instead of "version" to help reduce confusion. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-26[SUNGEM]: Fix MAC address setting when interface is up.Ruben Vandeginste
This patch implements set_mac_address for the sungem driver. This allows changing the mac address of the interface, even when the interface is up. Signed-off-by: Ruben Vandeginste <snowbender@gmail.com> Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[PPP]: Don't leak an sk_buff on interface destruction.G. Liakhovetski
Signed-off-by: G. Liakhovetski <gl@dsa-ac.de> Acked-by: Paul Mackerras <paulus@samba.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[TG3]: Update version and reldate.Michael Chan
Update version to 3.75. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[TG3]: Exit irq handler during chip reset.Michael Chan
On most tg3 chips, the memory enable bit in the PCI command register gets cleared during chip reset and must be restored before accessing PCI registers using memory cycles. The chip does not generate interrupt during chip reset, but the irq handler can still be called because of irq sharing or irqpoll. Reading a register in the irq handler can cause a master abort in this scenario and may result in a crash on some architectures. Use the TG3_FLAG_CHIP_RESETTING flag to tell the irq handler to exit without touching any registers. The checking of the flag is in the "slow" path of the irq handler and will not affect normal performance. The msi handler is not shared and therefore does not require checking the flag. Thanks to Bernhard Walle <bwalle@suse.de> for reporting the problem. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[TG3]: Eliminate the unused TG3_FLAG_SPLIT_MODE flag.Michael Chan
This flag to support multiple PCIX split completions was never used because of hardware bugs. This will make room for a new flag. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-25[NET]: remove unused header file: drivers/net/wan/lmc/lmc_media.hRobert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-24[MIPS] SB1250: Fix bugs/warnings by creative use of volatile.Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2007-03-23[netdrvr] ewrk3: correct card detection bugJeff Garzik
Arwin Vosselman pointed out: > The ewrk3-driver doesn't function with 2.6.16-kernels (used 2.6.16.41 for > my tests). Cards will never be detected due to this bug. > > drivers/net/ewrks3.c: > Line 417 reads: > > if (nicsr == (CSR_TXD | CSR_RXD)) > > that should be: > > if (nicsr != (CSR_TXD | CSR_RXD)) > > Comparison with the same line in v2.4 shows why: > > 2.4: > if (nicsr == (CSR_TXD | CSR_RXD)){ > > blah, blah > ========== > 2.6: > if (nicsr == (CSR_TXD | CSR_RXD)) > return -ENXIO; > > blah, blah > ========== > > blah,blah will not, but should, be executed in 2.6 with a card being present. > > The fix mentioned above solves this bug. Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23Merge branch 'upstream-fixes' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6 into tmp
2007-03-23cxgb3 - fix white spaces in drivers/net/KconfigDivy Le Ray
Use tabs instead of white spaces for CHELSIO_T3 entry. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: update driver version to 1.3.0-1.226Brice Goglin
Driver version is now 1.3.0-1.226. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: fix management of >4kB allocated pagesBrice Goglin
Fix management of allocated physical pages when the architecture page size is not 4kB since the firmware cannot cross 4K boundary. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: update wcfifo and intr_coal_delay default valuesBrice Goglin
Update the default value of 2 module parameters: * wcfifo disabled * intr_coal_delay 75us Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23myri10ge: Serverworks HT2100 provides aligned PCIe completionBrice Goglin
[PATCH 1/4] myri10ge: Serverworks HT2100 provides aligned PCIe completion Use the regular firmware on Serverworks HT2100 PCIe ports since this chipset provides aligned PCIe completion. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23mv643xx_eth: add mv643xx_eth_shutdown functionDale Farnsworth
mv643xx_eth_shutdown is needed for kexec. Signed-off-by: Dale Farnsworth <dale@farnsworth.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23SAA9730: Fix large pile of warningsRalf Baechle
The SAA9730 driver doesn't quite grok what the difference between an ioport and memory mapped I/O is. It just happened to work on the one Linux system the SAA9730 happens to spend it's misserable existence on. drivers/net/saa9730.c: In function 'evm_saa9730_enable_lan_int': drivers/net/saa9730.c:68: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:70: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:72: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_disable_lan_int': drivers/net/saa9730.c:78: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:80: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_clear_lan_int': drivers/net/saa9730.c:85: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_block_lan_int': drivers/net/saa9730.c:91: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'evm_saa9730_unblock_lan_int': drivers/net/saa9730.c:97: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'show_saa9730_regs': drivers/net/saa9730.c:150: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_allocate_buffers': drivers/net/saa9730.c:292: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:295: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:302: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:305: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:312: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_cam_load': drivers/net/saa9730.c:329: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:332: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_mii_init': drivers/net/saa9730.c:369: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:395: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:403: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:410: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:432: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_control_init': drivers/net/saa9730.c:470: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:474: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:478: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:484: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:487: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:490: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:493: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_stop': drivers/net/saa9730.c:505: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:508: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:510: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_dma_init': drivers/net/saa9730.c:536: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_start': drivers/net/saa9730.c:556: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:560: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:564: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:567: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_tx': drivers/net/saa9730.c:590: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_rx': drivers/net/saa9730.c:664: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:729: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_write': drivers/net/saa9730.c:848: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c: In function 'lan_saa9730_set_multicast': drivers/net/saa9730.c:943: warning: passing argument 2 of 'outl' makes integer from pointer without a cast drivers/net/saa9730.c:949: warning: passing argument 2 of 'outl' makes integer from pointer without a cast Fixed by using writel instead of outl. 42 warnings less. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23Revert "ucc_geth: returns NETDEV_TX_BUSY when BD ring is full"Li Yang
This reverts commit 18babd38547a042a4bfd4154a014d1ad33373eb0. Michael Barkowski points out that it's wrong, and I agree. The patch causes a problem rather than fixes one after another patch "ucc_geth: Fix BD processing" was applied. Before that patch, current packet should be blocked. However after the patch current packet is ok and we only need to block next. Reported-by: Michael Barkowski <michael.barkowski@freescale.com> Signed-off-by: Li Yang <leoli@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - T3B2 pcie config spaceDivy Le Ray
T3B2 does not lose its pcie config space on reset. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - Fix potential MAC hangDivy Le Ray
Under rare conditions, the MAC might hang while generating a pause frame. This patch fine tunes the MAC settings to avoid the issue, allows for periodic MAC state check, and triggers a recovery if hung. Also fix one MAC statistics counter for the rev board T3B2. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - Auto-load FW if mismatch detectedDivy Le Ray
The driver attempts to upgrade the FW if the card has the wrong version. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23cxgb3 - fix ethtool cmd on multiple queues portDivy Le Ray
Limit ethtool -g/-G to the given port's queues. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23Fix return code in pci-skeleton.cAnton Blanchard
We assign the return value of register_netdev to i, but return rc later on. Fix it. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: use per-port phy lockingStephen Hemminger
Rather than a workqueue and a per-board mutex to control PHY, use a tasklet and spinlock. Tasklet is lower overhead and works just as well for this. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: mask irqs when device downStephen Hemminger
Wheen a port on the skge driver is not used, it should mask off interrupts from theat port. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-23skge: deadlock on tx timeoutStephen Hemminger
The skge driver will deadlock if gets a transmit timeout because the netif_tx_lock() is already held. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-20[IrDA]: Delay needed when uploading firmware chunksNigel Williams
With 42101001.sb firmwares, we need a 10 ms delay between firmware chunks upload on irda-usb. Patch from Nigel Williams <nigelw@elder-gods.net> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2007-03-16[PATCH] airo: Fix an error path memory leakMichal Schmidt
The airo driver leaks memory if request_irq() fails. Signed-off-by: Michal Schmidt <mschmidt@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-16[PATCH] bcm43xx: MANUALWLAN fixesLarry Finger
During testing of bcm43xx interference mitigation, two problems were discovered: (1) When the MANUALWLAN mode was set, routines _stack_save and _stack_restore generated assertions that were traced to saving ILT registers with addresses > 0xFFF. This problem was fixed by adding one bit to the field used for the offset, and subtracting one bit from the space used for the id. (2) In MANUALWLAN mode, the IRQ XMIT errors are generated. The cause of these errors has not yet been located. Any suggestions on debugging this problem would be greatly appreciated. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2007-03-15natsemi: Avoid IntrStatus lossage if RX state machine resets.broonie@sirena.org.uk
This patch fixes the poll routine for the natsemi driver so that if the driver detects an RX state machine lockup then no interrupts will be lost while the driver recovers from that. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-15natsemi: Fix NAPI for interrupt sharingbroonie@sirena.org.uk
The interrupt status register for the natsemi chips is clear on read and was read unconditionally from both the interrupt and from the NAPI poll routine, meaning that if the interrupt service routine was called (for example, due to a shared interrupt) while a NAPI poll was scheduled interrupts could be missed. This patch fixes that by ensuring that the interrupt status register is only read by the interrupt handler when interrupts are enabled from the chip. It also reverts a workaround for this problem from the netpoll hook and improves the trace for interrupt events. Thanks to Sergei Shtylyov <sshtylyov@ru.mvista.com> for spotting the issue, Mark Huth <mhuth@mvista.com> for a simpler method and Simon Blake <simon@citylink.co.nz> for testing resources. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-15natsemi: Consistently use interrupt enable/disable functionsbroonie@sirena.org.uk
The natsemi drivers include functions for enabling and disabling interrupts from the chip but these are not used in all code paths. This patch changes the code paths that touch the interrupt enable register to use the functions. In all cases this adds an extra PCI read to post the operation but since none of these are in fast paths this shouldn't be too much of a problem. Signed-Off-By: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-15NetXen: Fix softlockup seen during hardware accessLinsys Contractor Mithlesh Thukral
NetXen: This will fix a softlock seen on some machines. The reason was too much time was spent waiting for hardware access to go through. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-15NetXen: Bug fix for Jumbo frames on XG cardLinsys Contractor Mithlesh Thukral
NetXen: Set the MTU for the right port depending upon the port number for XG cards. Signed-off by: Mithlesh Thukral <mithlesh@netxen.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-15skge: set mac address bonding fixStephen Hemminger
When bonding does fail over it calls set_mac_address. When this happens as the result of another port going down, the phy_mutex that is common to both ports is held, so it deadlocks. Setting the address doesn't need to do anything that needs the phy_mutex, it already has the RTNL to protect against other admin actions. This change just disables the receiver to avoid any hardware confusion while address is changing. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-03-14[PATCH] atl1 trivial endianness misannotationsAl Viro
NB: driver is choke-full of code that will break on big-endian; as long as the hardware is onboard-only we can live with that, but sooner or later that'll need fixing. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-14[PATCH] dmfe trivial endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 10:35:35 +0000