aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2005-12-28[TG3]: Update driver version and reldate.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-28[TG3]: ethtool -d hangs PCIe systemsChris Elmquist
Resubmitting after recommendation to use GET_REG32_1() instead of GET_REG32_LOOP(..., 1). Retested. Problem remains fixed. Prevent tg3_get_regs() from reading reserved and undocumented registers at RX_CPU_BASE and TX_CPU_BASE offsets which caused hostile behavior on PCIe platforms. Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-27[NET]: Validate socket filters against BPF_MAXINSNS in one spot.David S. Miller
Currently the checks are scattered all over and this leads to inconsistencies and even cases where the check is not made. Based upon a patch from Kris Katterjohn. Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-24Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2005-12-24[PATCH] forcedeth: fix random memory scribbling bugManfred Spraul
Two critical bugs were found in forcedeth 0.47: - TSO doesn't work. - pci_map_single() for the rx buffers is called with size==0. This bug is critical, it causes random memory corruptions on systems with an iommu. Below is a minimal fix for both bugs, for 2.6.15. TSO will be fixed properly in the next version. Tested on x86-64. Signed-Off-By: Manfred Spraul <manfred@colorfullife.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-24[PATCH] missing license for libphy.koOlaf Hering
Andy, libphy has no license tag. Something like the attached (untested!) patch is needed. Hopefully such a change finds its way into 2.6.15. filename: /lib/modules/2.6.15-rc5-3-ppc64/kernel/drivers/net/phy/libphy.ko vermagic: 2.6.15-rc5-3-ppc64 SMP gcc-4.1 depends: srcversion: ACC921B5E82701BE1E6F603 drivers/net/phy/phy_device.c | 4 ++++ 1 files changed, 4 insertions(+) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24[PATCH] orinoco_nortel: Add Symbol LA-4123 IDPavel Roskin
Add ID for Symbol LA-4123. Reported by Tomas Novak <tap@post.cz> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-24[PATCH] orinoco_nortel: Fix incorrect PCI resource usePavel Roskin
orinoco_nortel was broken during conversion to iomem API. Wrong PCI BAR is used for chipset registers. Reported by Tomas Novak <tap@post.cz> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-22[SUNGEM]: Fix link error with CONFIG_HOTPLUG disabled.Adrian Bunk
gem_remove_one() is called from the __devinit gem_init_one(). Therefore, gem_remove_one() mustn't be __devexit. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Fix ethtool memory testMichael Chan
Skip the memory 0xb50 to 0x1000 during "ethtool -t" memory test. Overwriting memory in this region can cause ASF problems. Update version and release date. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Add tw32_wait_f() for some sensitive registersMichael Chan
The tw32_f() function (register write with immediate read flush) can hang when used on some registers to switch clock frequencies and power. A new tw32_wait_f() is added for such registers with the delay before the read and after the read. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Some low power fixesMichael Chan
Add some missing workarounds in tg3_set_power_state(): 1. Workaround to prevent overdrawing current on 5714. 2. Do not power down 5700's PHY because of hw limitation. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-19[TG3]: Fix peer device handlingMichael Chan
Locate the pdev_peer for dual port 5714 NIC devices in addition to 5704 devices. The name is also changed to tg3_find_peer() from tg3_find_5704_peer(). It is also necessary to call netdev_priv() to get to the peer's private tg3 structure. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-15[PATCH] s2io: __iomem annotations for recent changesAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-12-13[TG3]: Fix low power stateMichael Chan
Fix the following bugs in tg3_set_power_state(): 1. Both WOL and ASF flags require switching to aux power. 2. Add a missing handshake with firmware to enable WOL. 3. Turn off the PHY if both WOL and ASF are disabled. 4. Add nvram arbitration before halting the firmware. 5. Fix tg3_setup_copper_phy() to switch to 100Mbps when changing to low power state. Update revision and date. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13[TG3]: Fix 5704 single-port modeMichael Chan
If the dual-port 5704 is configured as a single-port device with only one PCI function, it would trigger a BUG() condition in tg3_find_5704_peer(). This fixes the problem by returning its own pdev if the peer cannot be found. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13[TG3]: Fix suspend and resumeMichael Chan
Fix tg3_suspend() and tg3_resume() by clearing and setting the TG3_FLAG_INIT_COMPLETE flag when appropriate. tg3_set_power_state() looks at TG3_FLAG_INIT_COMPLETE on the peer device to determine when to appropriately switch to aux power. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13[TG3]: Fix nvram arbitration bugs.Michael Chan
The nvram arbitration rules were not strictly followed in a few places and this could lead to reading corrupted values from the nvram. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-13[netdrvr skge] fix buildJeff Garzik
2005-12-12[PATCH] skge: get rid of warning on raceStephen Hemminger
Get rid of warning in case of race with ring full and lockless tx on the skge driver. It is possible to be in the transmit routine with no available slots and already stopped. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12[PATCH] pcnet32: use MAC address from prom also on powerpcOlaf Hering
The CSR contains garbage after a coldboot on RS/6000. One some systems (like my 44p 270) the MAC address is all FF, on others (like my B50) it is ff:ff:ff:fd:ff:6b. It can eventually be fixed by loading pcnet32, set the interface into the UP state, rmmod pcnet32 and load it again. But this worked only on the 270. Only netbooting after a cold start provides the correct MAC address via prom and CSR. This makes it very unreliable. I dont know why the MAC is stored in two different places. Remove the special case for powerpc, which was added in early 2.4 development. Signed-off-by: Olaf Hering <olh@suse.de> drivers/net/pcnet32.c | 5 ----- 1 files changed, 5 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-12Merge branch 'master'Jeff Garzik
2005-12-06[TG3]: remove warning on raceStephen Hemminger
[ Move assosciated code comment to the correct spot, and update driver version and release date -DaveM ] Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-12-06[PATCH] sk98lin: rx checksum offset not setStephen Hemminger
The checksum offsets for receive offload were not being set correctly. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[netdrvr skge] fix typo, fix buildJeff Garzik
2005-12-01[netdrvr fmvj18x_cs] fix multicast bugKomuro
* use set_rx_mode to (re)initialize the multicast table. * MC_FILTERBREAK is 64 (= 8 * 8bit) * remove local_info_t.mc_filter
2005-12-01[wireless airo] reset card in initMatthieu CASTET
without this patch after an rmmod, modprobe the card won't work anymore until the next reboot. This patch seem safe to apply for all cards as the bsd driver already do that. I had to add a timeout because strange things happen (issuecommand will fail) if the card is already reseted (after a reboot). PS : it seems there are missing reset when leaving monitor mode... Signed-off-by: Matthieu CASTET <castet.matthieu@free.fr>
2005-12-01[PATCH] skge: handle VLAN checksum correctly on yukon rev 0Stephen Hemminger
If using UDP over VLAN, with the skge driver there is a possibility of generating an incorrect checksum. This is a unlikely occurrence because it is only an issue on Yukon revision 0, and that revision doesn't seem to exist on any current hardware (probably early prototype). Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] orinoco: fix setting power management parametersPavel Roskin
Power management parameters could not be set by iwconfig due to incorrect error handling. Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] jazzsonic: Fix platform device codeRalf Baechle
Use platform_driver_unregister not driver_unregister to unregister a struct platform_driver. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] jazzsonic: Fix build error.Ralf Baechle
jazz_sonnic_device -> jazz_sonic_device Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] mipsnet: Fix Copyright notice.Ralf Baechle
Sorry, no sekr1t mips c0dez ;-) Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] ibm_emac: fix graceful stop timeout handlingEugene Surovegin
This patch fixes graceful stop timeout handling in PPC4xx EMAC driver. Currently, when we stop TX/RX channels we just do some number of loops without relying on actual spent time. This has finally bitten me on one of our systems (heavy network traffic during start up, RX channel is stopped several times to configure multicast list). Graceful channel stop can take up to 1 frame time, so I've added device specific timeout counter which depends on current link speed and calls to udelay() to really wait required amount of time before giving up. Signed-off-by: Eugene Surovegin <ebs@ebshome.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sk98lin: avoid message confusion with skgeshemminger@osdl.org
Avoid possible confusion between skge and sk98lin driver by tagging messages properly. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sk98lin: add permanent address supportshemminger@osdl.org
Add permanent address and link status support via ethtool. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] sk98lin: fix checksumming codeshemminger@osdl.org
Remove code from sk98lin that does it's own checksum validation. This code is incorrect when dealing with nested protocols like VLAN's, and it is better to use regular receive code path to handle hardware checksum. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-12-01[PATCH] e1000: fix for dhcp issueJesse Brandeburg
Parse outgoing packets in e1000_transfer_dhcp_info as raw packet even if protocol bits are set. pump, for instance causes kernel panic on some systems, if parsed via udp header. Thanks to Derrell Lipman <Derrell.Lipman@BacklotTech.com> for reporting and testing. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-30b44: increase version numberFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-11-30b44: early return in dev->do_ioctl when the device is not upFrancois Romieu
The device has not gone through a whole reset/init sequence until the device is up. Accessing the mii interface before this point is not safe. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2005-11-30b44: missing netif_wake_queue() in b44_open()Mark Lord
This patch fixes a problem plaguing Dell notebooks with built-in b44 ethernet: The driver refuses to transmit packets of any kind until after the first 5-second tx_timeout occurs. This bug causes DHCP negotiation to fail (timeout) during installation of Ubuntu Linux. Signed-off-by: Mark Lord <lkml@rtr.ca> Signed-off-by: Andrew Morton <akpm@osdl.org>
2005-11-22[PATCH] net: Fix compiler-error on dgrs.c when !CONFIG_PCIRichard Knutsson
drivers/net/dgrs.c: In function `dgrs_init_module': drivers/net/dgrs.c:1598: `dgrs_pci_driver' undeclared (first use in this function) Signed-off-by: Richard Knutsson <ricknu-0@student.ltu.se> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-18[wireless hermes] build fixJeff Garzik
2005-11-18Merge branch 'upstream-fixes' of git://git.tuxdriver.com/git/netdev-jwlJeff Garzik
2005-11-18[PATCH] ipw2100: Fix 'Driver using old /proc/net/wireless...' messageJames Ketrenos
ipw2100: Fix 'Driver using old /proc/net/wireless...' message Wireless extensions moved the get_wireless_stats handler from being in net_device into wireless_handler. A prior instance of this patch resolved the issue for the ipw2200. This one fixes it for the ipw2100. Signed-off-by: Benoit Boissinot <benoit.boissinot@ens-lyon.org> Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-18[PATCH] fec_8xx: make CONFIG_FEC_8XX depend on CONFIG_8xxJohn W. Linville
Change CONFIG_FEC_8XX to depend on CONFIG_8xx instead of CONFIG_FEC. CONFIG_FEC depends on ColdFire CPUs, which does not apply for the PPC 8xx processors. Signed-off-by: John W. Linville <linville@tuxdriver.com>
2005-11-18[PATCH] drivers/net/wireless/hermes.c unsigned int comparisionGabriel A. Devenyi
hermas_bap_pread, hermes_bap_pwrite, and hermes_bap_pwrite_pad all have a parameter "len" that is declared unsigned, but checked for a value less than zero. Auditing the callers, it is possible for len to be passed a negative value, so len should be an int. Thanks to LinuxICC (http://linuxicc.sf.net) Signed-off-by: Gabriel A. Devenyi <ace@staticwave.ca> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18[PATCH] prism54 : Remove extraneous udelay/register readRoger While
In isl_38xx.c In routine isl38xx_trigger-device Move unnecessary udelay/register read. This is only required when hand-compiling the driver and setting VERBOSE > SHOW_ERROR_MESSAGES Signed-off-by: Roger While <simrw@sim-basis.de> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18[PATCH] SAA9730: Add missing header bits.Ralf Baechle
This header file patch was missing from the recent SAA9730 patch. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18[PATCH] au1000_eth: Include <linux/config.h>Ralf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> The Au1000 ethernet driver references plenty of CONFIG_* symbols. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18[PATCH] IOC3: Replace obsolete PCI APIRalf Baechle
Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>