aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-03-20[TG3]: Fix tg3_get_ringparam()Michael Chan
Fix-up tg3_get_ringparam() to return the correct parameters. Set the jumbo rx ring parameter only if it is supported by the chip and currently in use. Add missing value for tx_max_pending, noticed by Rick Jones. Update version to 3.51. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add some missing netif_running() checksMichael Chan
Add missing netif_running() checks in tg3's dev->set_multicast_list() and dev->set_mac_address(). If not netif_running(), these 2 calls can simply return 0 after storing the new settings if required. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: pci_register_driver conversionChristophe Lucas
This patch converts 2 IrDA drivers pci_module_init() calls to pci_register_driver(). Signed-off-by: Christophe Lucas <clucas@ifrance.com> Signed-off-by: Domen Puncer <domen@coderock.org> Signed-off-by: Samuel Ortiz <samuel@sortiz.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: sti/cli removal from EP7211 IrDA driverDavid chosrova
This patch replaces the deprecated sti/cli routines with the corresponding spin_lock ones. Signed-off-by: David chosrova <david.chosrova@libertysurf.fr> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: nsc-ircc: support for yet another Thinkpad IrDA chipsetJean Tourrilhes
This patch simply adds support for a variation of the nsc-ircc PC8739x chipset, found in some IBM Thinkpad laptops. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: nsc-ircc: PM updateDmitry Torokhov
This patch brings the nsc-ircc code to a more up to date power management scheme, following the current device model. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Rudolf Marek <r.marek@sh.cvut.cz> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[IRDA]: nsc-ircc: ISAPnP supportJean Tourrilhes
This enables PnP support for the nsc-ircc chipset. Since we can't fetch the chipset cfg_base from the PnP layer, we just use the PnP information as one more hint when probing the chip. Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: include <linux/vmalloc.h>Michael Chan
Include <linux/vmalloc.h> so that it compiles properly on all archs. Update version to 1.4.38. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Update versionMichael Chan
Update version to 1.4.37. Add missing flush_scheduled_work() in bnx2_suspend as noted by Jeff Garzik. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Support larger rx ring sizes (part 2)Michael Chan
Support bigger rx ring sizes (up to 1020) in the rx fast path. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Support larger rx ring sizes (part 1)Michael Chan
Increase maximum receive ring size from 255 to 1020 by supporting up to 4 linked pages of receive descriptors. To accomodate the higher memory usage, each physical descriptor page is allocated separately and the software ring that keeps track of the SKBs and the DMA addresses is allocated using vmalloc. Some of the receive-related fields in the bp structure are re- organized a bit for better locality of reference. The max. was reduced to 1020 from 4080 after discussion with David Miller. This patch contains ring init code changes only. This next patch contains rx data path code changes. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Fix bug when rx ring is fullMichael Chan
Fix the rx code path that does not handle the full rx ring correctly. When the rx ring is set to the max. size (i.e. 255), the consumer and producer indices will be the same when completing an rx packet. Fix the rx code to handle this condition properly. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Add ethtool -d supportMichael Chan
Add ETHTOOL_GREGS support. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[BNX2]: Reduce register test sizeMichael Chan
Eliminate some of the registers in ethtool register test to reduce driver size. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Update version and reldateMichael Chan
Update version to 3.50. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Support shutdown WoL.Michael Chan
Support WoL during shutdown by calling tg3_set_power_state(tp, PCI_D3hot) during tg3_close(). Change the power state parameter to pci_power_t type and use constants defined in pci.h. Certain ethtool operations cannot be performed after tg3_close() because the device will go to low power state. Add return -EAGAIN in such cases where appropriate. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Enable TSO by defaultMichael Chan
Enable TSO by default on newer chips that support TSO in hardware. Leave TSO off by default on older chips that do firmware TSO because performance is slightly lower. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20[TG3]: Add support for 5714S and 5715SMichael Chan
Add support for 5714S and 5715S. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: (230 commits) [SPARC64]: Update defconfig. [SPARC64]: Fix 2 bugs in huge page support. [SPARC64]: CONFIG_BLK_DEV_RAM fix [SPARC64]: Optimized TSB table initialization. [SPARC64]: Allow CONFIG_MEMORY_HOTPLUG to build. [SPARC64]: Use SLAB caches for TSB tables. [SPARC64]: Don't kill the page allocator when growing a TSB. [SPARC64]: Randomize mm->mmap_base when PF_RANDOMIZE is set. [SPARC64]: Increase top of 32-bit process stack. [SPARC64]: Top-down address space allocation for 32-bit tasks. [SPARC64] bbc_i2c: Fix cpu check and add missing module license. [SPARC64]: Fix and re-enable dynamic TSB sizing. [SUNSU]: Fix missing spinlock initialization. [TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts. [SPARC64]: First cut at VIS simulator for Niagara. [SPARC64]: Fix system type in /proc/cpuinfo and remove bogus OBP check. [SPARC64]: Add SMT scheduling support for Niagara. [SPARC64]: Fix 32-bit truncation which broke sparsemem. [SPARC64]: Move over to sparsemem. [SPARC64]: Fix new context version SMP handling. ...
2006-03-20Merge branch 'upstream' of ↵Jeff Garzik
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2006-03-20Merge branch 'master'Jeff Garzik
2006-03-20[TG3]: Do not try to access NIC_SRAM_DATA_SIG on Sun parts.David S. Miller
Sun does't put an SEEPROM behind the tigon3 chip, among other things, so accesses to these areas just give bus timeouts. Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-19[TG3]: 40-bit DMA workaround part 2Michael Chan
The 40-bit DMA workaround recently implemented for 5714, 5715, and 5780 needs to be expanded because there may be other tg3 devices behind the EPB Express to PCIX bridge in the 5780 class device. For example, some 4-port card or mother board designs have 5704 behind the 5714. All devices behind the EPB require the 40-bit DMA workaround. Thanks to Chris Elmquist again for reporting the problem and testing the patch. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-03-17[PATCH] ipw2100: Update version ipw2100 stamp to 1.2.2Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2100: move mutex.h include from ipw2100.c to ipw2100.hZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2100: semaphore to mutexes conversionIngo Molnar
semaphore to mutexes conversion. the conversion was generated via scripts, and the result was validated automatically via a script as well. build-tested. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2100: Fix radiotap code gcc warningZhu Yi
Fix gcc warning: ipw2100.c:2460: ISO C90 forbids mixed declarations and code Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2100: add radiotap headers to packtes captured in monitor modeStefan Rompf
Signed-off-by: Stefan Rompf <stefan@loplof.de> Signed-off-by: Andrea Merello <andreamrl at tiscali it> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2x00: expend Copyright to 2006Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] drivers/net/wireless/ipw2200.c: fix an array overunAdrian Bunk
This patch fixes a big array overun found by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Update ipw2200 version stamp to 1.1.1Zhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: switch to the new ipw2200-fw-3.0 image formatJames Ketrenos
This patch modifies the driver to support the ipw2200-fw-3.0 image format. The 3.0 fw image does not add any new capabilities, but as a result of image format changes, it should fix two problems experienced by users: 1) Race conditions with the request_firmware interface and udev/hotplug are improved as only a single request_firmware call is now required to load the firmware and microcode (vs. 3 separate calls previously) 2) The monitor mode firmware (sniffer) is now packaged with the correct boot image so it can now function without frequent restarts. Note: Once you apply this patch, you will also need to upgrade your firmware image to the 3.0 version available from: http://ipw2200.sf.net/firmware.php Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: wireless extension sensitivity threshold supportOlivier Hochreutiner
The patch allows the user to set the handover threshold, i.e. the number of consecutively missed beacons that will trigger a roaming attempt. The disassociation threshold is set to 3 times the handover threshold. Signed-off-by: Olivier Hochreutiner <olivier.hochreutiner@epfl.ch> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Enables the "slow diversity" algorithmCahill, Ben M
This forces one antenna or the other, if the background noise is significantly quieter in one than the other. It favors the quieter antenna, and won't kick in unless the difference is significant. Signed-off-by: Cahill, Ben M <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Set a meaningful silence threshold valueCahill, Ben M
Set a meaningful silence threshold value (replacing our previous "0" default), which gets rid of the gratuitous "Link deterioration" notifications that we've been receiving from firmware. This notification feature tells the driver information to help it determine when to pre-emptively restart the firmware/ucode in anticipation of firmware errors! But since setting this new threshold, I haven't seen any such notifications. At least it keeps the logs a little less busy. Signed-off-by: Cahill, Ben M <ben.m.cahill@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: export `debug' module param only if CONFIG_IPW2200_DEBUGZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Change debug level for firmware error loggingZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Filter unsupported channels out in ad-hoc modeZhu Yi
Currently iwlist ethX freq[uency]/channel lists all the channels the card supported for the current region, which includes some channels can only be used in infrastructure mode. This patch filters these channels out if the card is currently in ad-hoc mode. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Fix ipw_sw_reset() implementation inconsistent with commentZhu Yi
Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Fix rf_kill is activated after mode change with 'disable=1'Zhu Yi
When loading the ipw2200 module with disabled=1, rf_kill is activated after every mode change. This is caused by ipw_sw_reset() is called when a mode is changed. The patch fixed the problem by distinguishing the purposes with the 'option' paramenter. Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: remove the WPA card associates to non-WPA AP checkingZhu Yi
wpa_supplicant needs to set wpa_enabled unconditionally, with this check it hasn't been possible to connect to non-WPA networks using wpa_supplicant. So remove below check. if (priv->ieee->wpa_enabled && network->wpa_ie_len == 0 && network->rsn_ie_len == 0) Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: Add signal level to iwlist scan outputBill Moss
This patch does two things. It uses the parameter IW_QUAL_DBM which is new in WE-19 to cause signal level and noise to be reported in dBm by the wireless tools. It also defines the signal level as an unsigned integer so that the signal level will be reported by iwlist iface scan. Signed-off-by: Bill Moss <bmoss@clemson.edu> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: use generic ieee80211_get_hdrlen() to get packet lengthZhu Yi
replace ipw2200 specific frame_hdr_len() with generic ieee80211 routine ieee80211_get_hdrlen() Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: fix a potential NULL pointer dereferenceZhu Yi
Only on CONFIG_IPW2200_DEBUG is not defined Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: stop netdev queue if h/w doesn't have space for new packetsJames Ketrenos
The patch roll back the change we made to support for the ability to start/stop independent Tx queues within a single net device in order to support 802.11e QoS. We need to be able to indicate to the upper layers that packets of a given priority can not be sent any more without halting transmission of all packets, and without rescheduling high priority packets down to the next priority level. So we return NETDEV_TX_BUSY in this case and rely on the stack would take care of rescheduling... which it apparently does immediately and consumes the CPU. This caused the ksoftirqd kernel thread consuming almost all the CPU... To put the code back to the way it was before we made these changes we put the call netif_queue_stop back in ipw_tx_skb. This effectively disables multiple priority based transmit queues for 802.11e, but given that its broken anyway... Signed-off-by: James Ketrenos <jketreno@linux.intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] ipw2200: print geography code upon module loadHenrik Brix Andersen
Given the amount of support requests for the meaning of the geography code I've written a patch for printing this information on module load no matter the debug level. I've also added a section to the README.ipw2200 file listing the geography codes and their meaning. Signed-off-by: Henrik Brix Andersen <brix@gentoo.org> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] drivers/net/wireless/ipw2200.c: make ipw_qos_current_mode() staticAdrian Bunk
This patch makes the needlessly global function ipw_qos_current_mode() static. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-17[PATCH] Remove duplicated code from ipw2200.cLarry Finger
As stated in a comment, the ipw2200 driver uses several routines that were borrowed from ieee80211_geo.c. As ipw2200 requires ieee80211, these routines are duplicated. The attached patch, which is sent as an attachment to preserve whitespace, converts ipw2200.c to use the ieee80211 versions, thereby reducing bloat in both the source and binary. Signed-Off-By: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-03-16Merge branch 'upstream-fixes'Jeff Garzik
2006-03-16[netdrvr] fix array overflows in Chelsio driverScott Bardone
Adrian Bunk wrote: > The Coverity checker spotted the following two array overflows in > drivers/net/chelsio/sge.c (in both cases, the arrays contain 3 > elements): [snip] This is a bug. The array should contain 2 elements. Here is the fix. Signed-off-by: Scott Bardone <sbardone@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-26 09:54:56 +0000