aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-01-28b43: rewrite A PHY initializationStefano Brivio
Rewrite and sync A PHY initialization with specs, thus allowing for further work to be done on 802.11a support. Note that A PHY initialization involves G PHYs as well. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Acked-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43legacy: rewrite and fix rfkill initializationStefano Brivio
The rfkill subsystem doesn't like code like that rfkill_allocate(); rfkill_register(); rfkill_unregister(); rfkill_register(); /* <- This will crash */ This sequence happens with modprobe b43 ifconfig wlanX up ifconfig wlanX down ifconfig wlanX up Fix this by always re-allocating the rfkill stuff before register. The patch to b43 by Michael Buesch <mb@bu3sch.de> has been ported to b43legacy. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43legacy: use a consistent naming scheme for the opsStefano Brivio
Use a consistent naming scheme for the ops. The patch to b43 by Michael Buesch <mb@bu3sch.de> has been ported to b43legacy. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28b43legacy: use the retry limits provided by mac80211Stefano Brivio
Use the retry limits provided by mac80211. The patch to b43 by Michael Buesch <mb@bu3sch.de> has been ported to b43legacy. Signed-off-by: Stefano Brivio <stefano.brivio@polimi.it> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-01-28SGISEEQ: use cached memory access to make driver work on IP28Thomas Bogendoerfer
SGI IP28 machines would need special treatment (enable adding addtional wait states) when accessing memory uncached. To avoid this pain I changed the driver to use only cached access to memory. Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi_mac: Don't enable RX/TX without a link (if possible)Olof Johansson
pasemi_mac: Don't enable RX/TX without a link (if possible) Don't enable RX/TX of packets until we have a link, since there's a chance we'll just get RX frame errors, etc. The case where we don't have a PHY we can't do much about: Just enable it and deal with errors as they come in. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi_mac: Print warning when not attaching to a PHYOlof Johansson
pasemi_mac: Print warning when not attaching to a PHY Print a warning on the console when not connecting to a phy for an interface. It turns out to be a pretty common problem when someone gets the MDIO info wrong in their device tree, resulting in the macs running at a fixed 1Gbit FD. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi_mac: Remove SKB copy/recycle logicOlof Johansson
pasemi_mac: Remove SKB copy/recycle logic It doesn't really buy us much, since copying is about as expensive as the allocation in the first place. Just remove it for now. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi_mac: SKB unmap optimizationOlof Johansson
pasemi_mac: SKB unmap optimization Avoid touching skb_shinfo() in the unmap path, since it turns out to normally cause cache misses and delays. instead, save number of fragments in the TX_RING_INFO structures since that's all that's needed anyway. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi_mac: Software-based LRO supportOlof Johansson
pasemi_mac: Software-based LRO support Implement LRO for pasemi_mac. Pretty straightforward. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi_mac: Improve RX interrupt mitigationOlof Johansson
pasemi_mac: Improve RX interrupt mitigation Currently the receive side interrupts will go off on the reception of a packet, NAPI will poll the ring and keep polling as long as there's a decent amount of packets to receive. This is less than optimal, especially for LRO where it's better if we have a more substantial amount of packets to process at once, to get the real LRO benefits. So, set the count threshold to a higher value and use the timeout feature that will give us an interrupt even if not enough packets have come in to set off the count threshold. FIXME: It'd be real nice to have ethtool support for users to tune this at runtime. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi_mac: Fix TX cleaningOlof Johansson
pasemi_mac: Fix TX cleaning This is a bit awkward. We don't have a timer-delayed interrupt on TX complete, but we have a count threshold. So set that reasonably high (32 packets), and schedule the NAPI poll when it goes off. Also bump a regular timer that will take care of rotting packets for the last 1..31 ones in case we don't trigger a TX interrupt (and there's no RX activity that would otherwise trigger the poll). The longer-term fix is to separate TX from RX NAPI and do two separate poll loops. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi_mac: performance tweaksOlof Johansson
pasemi_mac: performance tweaks * Seems like we do better with a smaller RX ring, probably because chances of still having the SKB cached are better * Const-ify variables to get better code generation and fewer reloads * Move prefetching around a little, and try to prefetch the whole SKB * Set NETIF_F_HIGHDMA * Misc other minor tweaks Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi_mac: Convert to new dma libraryOlof Johansson
pasemi_mac: Convert to new dma library Convert the pasemi_mac driver to the new platform global DMA manaagement library. This also does a couple of other minor cleanups w.r.t. channel management. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi_mac: Move register definitions to include/asm-powerpcOlof Johansson
pasemi_mac: Move register definitions to include/asm-powerpc Move the common register formats and descriptor layouts from drivers/net/pasemi_mac.h to include/asm-poewrpc/pasemi_dma.h Previously only the ethernet driver was using them, but other drivers are coming up that will also use them, so it makes sense to share the constants. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28pasemi_mac: RX/TX ring management cleanupOlof Johansson
pasemi_mac: RX/TX ring management cleanup Prepare a bit for supporting multiple TX queues by cleaning up some of the ring management and shuffle things around a bit. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28sky2: rx allocation threshold changeStephen Hemminger
When using larger MTU's sky2 driver changes from allocating one data area, to using multiple pages. The threshold for this was based on a heuristic where the cost of a single allocation is bigger than one page. Since the allocator has changed, this heuristic is now incorrect; instead just make the threshold be when the total size of the allocation is greater than one page. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28sky2: align IP header on Rx if possibleStephen Hemminger
The sky2 driver was not aligning the IP header on receive buffers. This workaround is only needed on hardware with broken FIFO, newer chips without FIFO can just DMA to unaligned address. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28r6040: cleanupsFrancois Romieu
- whitespaces vs tabs - use 80 cols - use if_mii - use netdev_priv - remove useless cast to void * - PCI device id does not need to be globally available Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2008-01-28r6040: erroneous dev->privFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2008-01-28r6040: remove virt_to_busFrancois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2008-01-28r6040: compile errorFrancois Romieu
drivers/net/r6040.c: In function 'rx_buf_alloc': drivers/net/r6040.c:262: warning: passing argument 2 of 'pci_map_single' makes pointer from integer without a cast Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2008-01-28axnet_cs: use spin_lock_irqsave instead of spin_lock + disable_irqKomuro
Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28drivers/net/cxgb3: trim trailing whitespaceJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28cxgb3 - Fix I/O synchronizationDivy Le Ray
Synchronize memory access before ringing the Tx door bell. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28cxgb3 - HW set up updatesDivy Le Ray
Disable PEX errors. The HW generates false positives. Update RSS hash function to a symmetric algorithm. Update T3C HW support Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28cxgb3 - sysfs methods clean upDivy Le Ray
Remove unused argument in sysfs methods Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28cxgb3 - fix interaction with pktgenDivy Le Ray
Do not use skb->cb to stash unmap info, save the info to the descriptor state. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28cxgb3 - FW upgradeDivy Le Ray
Bump up FW version to 5.0. Do not downgrade FW within the same major version range. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28cxgb3 - Add EEH supportDivy Le Ray
Add PCI recovery support Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28cxgb3 - Fix resources release.Divy Le Ray
Remove sysfs entries before unregistering the net devices. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28cxgb3 - Use wild card for PCI subdevice ID matchDivy Le Ray
Subdevice ID is not necessarily set to 1. Use wild card for PCI device matching Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28cxgb3 - fix MSI-X failure pathDivy Le Ray
Return error code when msi-x settings fail. Signed-off-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28[netdrvr] checkpatch cleanupsJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28wireless: checkpatch cleanupsJeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28drivers/net/r6040: fix obvious problems (but more remain)Jeff Garzik
- checkpatch fixes - fix bogus and uninitialized return codes in r6040_start_xmit() - netdev_get_settings() fix obvious locking bug flagged by compiler warning - set DMA consistent mask - remove unnecessary setting of dev->base_addr Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28[netdrvr] netxen: checkpatch fixes (98% trim trailing whitespace)Jeff Garzik
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-28dm9601: Consolidate common parts of dm_write_*_asyncPeter Korsgaard
dm_write_async and dm_write_reg_async are almost identical. Move common functionality to dm_write_async_helper (saves ~256b). Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28slip: Drag kicking and screaming into coding style complianceAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-283c501: Bring into compliance with the coding styleAlan Cox
3c501 leads the way... 8) Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28drivers/net/chelsio/: #if 0 unused functionsAdrian Bunk
This patch #if 0's the following unused functions: - espi.c:t1_espi_set_misc_ctrl() - sge.c:t1_sched_set_max_avail_bytes() - sge.c:t1_sched_set_drain_bits_per_us() Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28drivers/net: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28drivers/net/sk98lin: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28drivers/net/wan: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28drivers/net/netxen: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28drivers/net/ixgb: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28drivers/net/cxgb3: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28drivers/net/chelsio: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-28add bnx2x driver for BCM57710Eliezer Tamir
Signed-off-by: Eliezer Tamir <eliezert@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[S2IO]: Support for add/delete/store/restore ethernet addressesSreenivasa Honnur
- Support to add/delete/store/restore 64 and 128 Ethernet addresses for Xframe I and Xframe II respectively. Signed-off-by: Sreenivasa Honnur <sreenivasa.honnur@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 13:49:33 +0000