aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-02-27iwl3945: use iwl_rx_reply_error notificationAbhijeet Kolekar
Patch removes duplicate code from iwl3945 and uses iwl_rx_reply_error and spectrum notifications from iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use iwl rx handlersAbhijeet Kolekar
Patch removes duplicate rx handlers(pm_sleep and pm_debug) from 3945 and uses handlers from iwlwifi. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use iwl_mac_hw_scan callbackAbhijeet Kolekar
3945 can use iwl_mac_hw_scan callback instead of iwl3945_mac_hw_scan callback. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwl3945: use iwl_rx_scan handlersAbhijeet Kolekar
Patch makes use of iwl_rx_scan handler for 3945. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Acked-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27at76c50x-usb: convert at76_debug to an unsigned intJason Andryuk
at76_debug should be an unsigned int as it used as a bit field. In fact, modprobe fails when trying to set at76_debug's high bit. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27at76c50x-usb: update to latest mac80211 hw scan apiJason Andryuk
With the latest mac80211 stack, the driver needs to be updated for cfg80211 scanning. I based the changes off of modifications for at76_usb found here: http://johannes.sipsolutions.net/patches/old/all/2008-09-19-13:35/020-cfg80211-scan.patch The trick was that max_signal also needs to be set to avoid a divide by zero Oops. I just guessed and used the value 100 for now. kvalo: handpicked the change from two different patches Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27at76c50x-usb: add driverKalle Valo
This is a driver for usb devices based on at76c50x chipset. This is a mac80211 port of the original at76_usb driver. Signed-off-by: Kalle Valo <kalle.valo@iki.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwlagn: default to MAX_UCODE_BEACON_INTERVAL in iwl_adjust_beacon_intervalJohn W. Linville
Default to MAX_UCODE_BEACON_INTERVAL if the output of iwl_adjust_beacon_interval would otherwise be zero. This prevents a division by zero on my iwl5300-equipped Lenovo T400 with kernels that include "mac80211: use cfg80211s BSS infrastructure". This patch is a bit of a hack -- I'm not sure why iwl_setup_rxon_timing is giving iwl_adjust_beacon_interval a zero input (which is the only way it would output zero). I would be happy to have a better fix. But for now, this makes my box boot... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27b43: Fix LO calibration txctl reg valueRoel Kluin
This patch expands the parenthesis in the txctl reg write of the LO calibration to enforce precedence rules. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27p54: misplaced parenthesesRoel Kluin
Only FIF_FCSFAIL is set due to parentheses Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ipw2x00: age scan results on resumeDan Williams
Scanned BSS entries are timestamped with jiffies, which doesn't increment across suspend and hibernate. On resume, every BSS in the scan list looks like it was scanned within the last 10 seconds, irregardless of how long the machine was actually asleep. Age scan results on resume with the time spent during sleep so userspace has a clue how old they really are. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27airo: correct improper initialization of local variableJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Fix PTK/GTK handshake timeoutVasanthakumar Thiagarajan
Some APs don't start BA negotiation with the client before it is done with the key handshake in WPA/RSN. With those APs, key handshake times out if EAPOL frames are sent after addba request. So defer the BA negotiation until we are done with tx/rx of all EAPOL frames. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27rt2x00: Fix RF offsetIvo van Doorn
The word_base is in bytes instead of word index number, this means that when using it, it should be transformed into a word index first. Otherwise RF register reading will fail through debugfs since we would start reading 4 words starting with word 4 (which is the last valid word for RF). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Use beacon interval directlySujith
Setting up the CAB queue requires only the beacon interval, remove the function ath_get_beaconconfig() which is redundant. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Remove ath_txq_depth and get the queue depth directlySujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Remove a few unused capability macrosSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Initialize channel change timeSujith
Set channel change time to 5ms, this will improve scan results. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Fix antenna assignment bug in TX status processingSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Fix HW wait timeoutSujith
RX and calibration have different timeout requirements. This patch fixes it by changing the HW wait routine to accept a timeout value. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Program the RTC registers correctlySujith
This patch programs the RTC registers of AR9100 chipsets correctly during chip reset. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: compute rts/cts duration after computing full pktlenBob Copeland
RTS and CTS-to-self duration needs to go after ICV len is considered. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: move beacon processing to a taskletBob Copeland
We currently send beacons directly from the interrupt routine. This can hold up interrupt processing in beaconing modes and makes the ISR somewhat more complex. Move it to a tasklet like rx and tx. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: use spin_lock_irqsave for beacon lockBob Copeland
ath5k_reset can be called from process context, which in turn can call ath5k_beacon_config which takes the sc->block spinlock. Since it can also be taken in hard irq context, use spin_lock_irqsave everywhere. This fixes a potential deadlock in adhoc mode. Changes-licensed-under: 3-Clause-BSD Cc: stable@kernel.org Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath5k: don't mask off interrupt bitsBob Copeland
Since interrupts are already masked by the hardware, there's no need to discard interrupt bits in the ISR itself. Also, in ath5k_beacon_config we mask off a couple of bits without locking, so doing this mask in software can lead to unhandled beacon timer and beacon miss interrupts. Changes-licensed-under: 3-Clause-BSD Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27rt2x00: Add various new USB IDs for rt73usbIvo van Doorn
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27rt2x00: Remove check for rf word 0Ivo van Doorn
The only way rf_write() can be called with word 0 is when the user sends the wrong word index through debugfs. However the values which are send through debugfs are validated using the RF_BASE and RF_SIZE macro values, the most logical solution is to increase RF_BASE with 4 and decrease RF_SIZE with 4 (RF_SIZE has always been 1 word too big) Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27rt2x00: uncomment get_tsfIvo van Doorn
The atomic requirement for get_tsf() has been removed by mac80211. This means the USB drivers can add support for the callback function again. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwlwifi: Fix and rework Kconfig fileReinette Chatre
Fixes: - iwlwifi is an optional driver and should thus not default to 'y'. - 3945 now depends on IWLCORE. Rework: - There is not a case when IWLCORE should not be selected. At the same time the driver does not use IWLWIFI or IWLCORE. We can just merge the usage of these two. With IWLWIFI being the driver name we proceed to use just it and replace instances of IWLCORE with it. The module name does not change and is still iwlcore. - Both IWLAGN and IWL3945 are selecting FW_LOADER, we can thus just move this up to one select when IWLWIFI is selected. - IWL5000 now supports Intel Wireless Wifi 100, 6000, and 6050 series. - Now that 3945 depends on IWLWIFI we can also indicate its dependency on MAC80211_LEDS and LEDS_CLASS at this level. - IWLAGN_LEDS is not used by driver - remove it. - IWLAGN_SPECTRUM_MEASUREMENT actually depends on IWLWIFI as it forms part of iwlcore module. Move this config up in Kconfig to reflect that and also change name to IWLWIFI_SPECTRUM_MEASUREMENT. - CONFIG_IWLWIFI_RFKILL is used by iwlagn as well as iwl3945, add text to description that indicates this. - CONFIG_IWL3945_RFKILL does not exist - remove usage from driver. - Add "iwlagn" to end of description of IWLAGN to help people understand what iwlagn means in rest of Kconfig text. - Add "iwl3945" to end of description of IWL3945 to help people understand what iwlagn means in rest of Kconfig text. - Change IWLWIFI_DEBUGFS description to indicate that only iwlagn supports it (for now). Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Reported-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwlwifi: use singlethread workqueueReinette Chatre
Use one workqueue instead of one per CPU. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> cc: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwlwifi: report correct and detailed values about requested txpowerWu, Fengguang
Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ipw2200, fix ipw io functionsJiri Slaby
- some of them are defined as follows: #define ipw_write32 expr1; expr2 and are called from loops or ifs without a compound statement, so they are broken. Fix it by putting them into do {} while (0) for writes and ({ }) for reads. - also unify and cleanup them while at it -- convert them from macros to inline functions, so that we get some basic typechecking Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Cc: James Ketrenos <jketreno@linux.intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: move common regulatory code out of if() branchesBob Copeland
Both branches of the regulatory check in ath_attach() set up a custom regulatory domain and apply radar and world flags, so extract those into a single path. While at it, fix a couple of spelling errors and an unnecessary extra pointer traversal. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: remove prototype for ath9k_regd_get_current_countryBob Copeland
ath9k_regd_get_current_country() doesn't exist. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: remove ath9k_regd_get_rd()Bob Copeland
The function ath9k_regd_get_rd() is unused. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: convert isWwrSKU macro into C codeBob Copeland
Write isWwrSKU as an inline function and nix the camel-case to make the routine slightly clearer. Change its argument to take the regd value directly so it can eventually be used by ath5k as well. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: save a few calls to ath9k_regd_get_eepromRDBob Copeland
Since we already have a stack variable to track the eeprom regd, we can grab it up front it and save three calls to fetch it again. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: remove write-only current_rd_inuseBob Copeland
The current_rd_inuse regulatory value is assigned but not used anywhere. Signed-off-by: Bob Copeland <me@bobcopeland.com> Acked-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27iwlagn: clean up error path in iwl_pci_probeHelmut Schaa
This avoids triggering a BUG_ON in pci_disable_msi in the error path. Furthermore remove the first call to pci_disable_device as it is already called at out_pci_disable_device. Both issues were introduced in the patch "iwlagn: fix hw-rfkill while the interface is down". Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com> Acked-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Add open loop control supportSenthil Balasubramanian
This patch adds Open Loop Control support for Atheros chipsets that supports open loop power control. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Decrease minimum NF thresholdSujith
The existing value was too conservative, causing the history buffer not to be updated. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Fix incorrect noise floor reading for 4k EEPROMSujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Fix bug in disabling MIB countersSujith
This patch fixes a bug in ANI, where the MIB counters were being cleared before the stats were updated. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Initialize AGC calibration properlySujith
Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Enable TSF Out of Range InterruptSujith
This patch lays the groundwork for handling TSF Out of Range interrupt, which will be used for power save later on. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Enable Fractional N modeSujith
This patch enables Fractional N mode for all channel if the EEPROM says so, and also fixes the INI only when the device is not a 2 GHz only capable device. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Fix rd_ext EEPROM capability for AR9285Sujith
AR9285 chipsets have a different EEPROM layout, handle this appropriately when populating the rd_ext capability. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27ath9k: Store the correct max TX power levelSujith
This patch fixes a bug where the max power level was being calculated incorrectly. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27make net/ieee80211.h private to ipw2x00Dan Williams
Only ipw2x00 now uses it. Reduce confusion. Profit! Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-02-27hostap: convert usage of net/ieee80211.h to linux/ieee80211.hDan Williams
So that net/ieee80211.h can be made private to ipw2x00 in a follow-up. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 18:07:37 +0000