aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-05-25Merge branch 'linux-2.6.30.y' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2009-05-25r8169: avoid losing MSI interruptsDavid Dillow
The 8169 chip only generates MSI interrupts when all enabled event sources are quiescent and one or more sources transition to active. If not all of the active events are acknowledged, or a new event becomes active while the existing ones are cleared in the handler, we will not see a new interrupt. The current interrupt handler masks off the Rx and Tx events once the NAPI handler has been scheduled, which opens a race window in which we can get another Rx or Tx event and never ACK'ing it, stopping all activity until the link is reset (ifconfig down/up). Fix this by always ACK'ing all event sources, and loop in the handler until we have all sources quiescent. Signed-off-by: David Dillow <dave@thedillows.org> Tested-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25mac8390: fix regression caused during net_device_ops conversionFinn Thain
Changeset ca17584bf2ad1b1e37a5c0e4386728cc5fc9dabc ("mac8390: update to net_device_ops") broke mac8390 by adding 8390.o to the link. That meant that lib8390.c was included twice, once in mac8390.c and once in 8390.c, subject to different macros. This patch reverts that by avoiding the wrappers in 8390.c. They seem to be of no value since COMPAT_NET_DEV_OPS is going away soon. Tested with a Kinetics EtherPort card. Signed-off-by: Finn Thain <fthain@telegraphics.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-25gianfar: fix BUG under load after introduction of skb recyclingLennert Buytenhek
Since commit 0fd56bb5be6455d0d42241e65aed057244665e5e ("gianfar: Add support for skb recycling"), gianfar puts skbuffs that are in the rx ring back onto the recycle list as-is in case there was a receive error, but this breaks the following invariant: that all skbuffs on the recycle list have skb->data = skb->head + NET_SKB_PAD. The RXBUF_ALIGNMENT realignment done in gfar_new_skb() will be done twice on skbuffs recycled in this way, causing there not to be enough room in the skb anymore to receive a full packet, eventually leading to an skb_over_panic from gfar_clean_rx_ring() -> skb_put(). Resetting the skb->data pointer to skb->head + NET_SKB_PAD before putting the skb back onto the recycle list restores the mentioned invariant, and should fix this issue. Reported-by: Michael Guntsche <mike@it-loops.com> Tested-by: Michael Guntsche <mike@it-loops.com> Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-22wimax/i2400m: usb: fix device reset on autosuspend while not yet idleInaky Perez-Gonzalez
When the i2400m is connected to a network, the host interface (USB) cannot be suspended. For that to happen, the device has to have negotiated with the basestation to put the link on IDLE state. If the host tries to put the device in standby while it is connected but not idle, the device resets, as the driver should not do that. To avoid triggering that, when the USB susbsytem requires the driver to autosuspend the device, the driver checks if the device is not yet idle. If it is not, the request is rejected (will be retried again later on after the autosuspend timeout). At some point the device will enter idle and the request will succeed (unless of course, there is network traffic, but at that point, there is no idle neither in the link or the host interface). Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-20wireless: beyond ARRAY_SIZE of intf->crypto_statsRoel Kluin
Do not go beyond ARRAY_SIZE of intf->crypto_stats Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20iwlwifi: update 5000 ucode support to version 2 of APIJay Sternberg
enable iwl driver to support 5000 ucode having version 2 of API Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20airo: fix airo_get_encode{,ext} buffer overflow like I mean it...John W. Linville
"airo: airo_get_encode{,ext} potential buffer overflow" was actually a no-op, due to an unrecognized type overflow in an assignment. Oddly, gcc only seems to tell me about it when using -Wextra...grrr... Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20ath5k: fix interpolation with equal power levelsFabio Rossi
When the EEPROM contains weird values for the power levels we have to fix the interpolation process. Signed-off-by: Fabio Rossi <rossi.f@inwind.it> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20iwlwifi: do not cancel delayed work inside spin_lock_irqsaveReinette Chatre
Calling cancel_delayed_work() from inside spin_lock_irqsave, introduces a potential deadlock. As explained by Johannes Berg <johannes@sipsolutions.net> A - lock T - timer phase CPU 1 CPU 2 --------------------------------------------- some place that calls cancel_timer_sync() (which is the | code) lock-irq(A) | "lock-irq"(T) | "unlock"(T) | wait(T) unlock(A) timer softirq "lock"(T) run(T) "unlock"(T) irq handler lock(A) unlock(A) Now all that again, interleaved, leading to deadlock: lock-irq(A) "lock"(T) run(T) IRQ during or maybe before run(T) --> lock(A) "lock-irq"(T) wait(T) We fix this by moving the call to cancel_delayed_work() into workqueue. There are cases where the work may not actually be queued or running at the time we are trying to cancel it, but cancel_delayed_work() is able to deal with this. Also cleanup iwl_set_mode related to this call. This function (iwl_set_mode) is only called when bringing interface up and there will thus not be any scanning done. No need to try to cancel scanning. Fixes http://bugzilla.kernel.org/show_bug.cgi?id=13224, which was also reported at http://marc.info/?l=linux-wireless&m=124081921903223&w=2 . Tested-by: Miles Lane <miles.lane@gmail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20ath5k: fix exp off-by-one when computing OFDM delta slopeForrest Zhang
Commit e8f055f0c3b ("ath5k: Update reset code") subtly changed the code that computes floating point values for the PHY3_TIMING register such that the exponent is off by a decimal point, which can cause problems with OFDM channel operation. get_bitmask_order() actually returns the highest bit set plus one, whereas the previous code wanted the highest bit set. Instead, use ilog2 which is what this code is really calculating. Also check coef_scaled to handle the (invalid) case where we need log2(0). Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-20ath5k: fix scanning in AR2424Pavel Roskin
AR5K_PHY_PLL_40MHZ_5413 should not be ORed with AR5K_PHY_MODE_RAD_RF5112 for 5 GHz channels. The incorrect PLL value breaks scanning in the countries where 5 GHz channels are allowed. Signed-off-by: Pavel Roskin <proski@gnu.org> Acked-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-18be2net: add two new pci device ids to pci device tableAjit Khaparde
Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17Neterion: *FIFO1_DMA_ERR set twice, should 2nd be *FIFO2_DMA_ERR?roel kluin
FIFO1_DMA_ERR is set twice, the second should be FIFO2_DMA_ERR. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Ram Vepa <ram.vepa@neterion.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17mv643xx_eth: fix PPC DMA breakageGabriel Paubert
After 2.6.29, PPC no more admits passing NULL to the dev parameter of the DMA API. The result is a BUG followed by solid lock-up when the mv643xx_eth driver brings an interface up. The following patch makes the driver work on my Pegasos again; it is mostly a search and replace of NULL by mp->dev->dev.parent in dma allocation/freeing/mapping/unmapping functions. Signed-off-by: Gabriel Paubert <paubert@iram.es> Acked-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17bonding: fix link down handling in 802.3ad modeStephen Hemminger
One of the purposes of bonding is to allow for redundant links, and failover correctly if the cable is pulled. If all the members of a bonded device have no carrier present, the bonded device itself needs to report no carrier present to user space so management tools (like routing daemons) can respond. Bonding in 802.3ad mode does not work correctly for this because it incorrectly chooses a link that is down as a possible aggregator. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17Merge branch 'linux-2.6.30.y' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/inaky/wimax
2009-05-17NET: Meth: Fix unsafe mix of irq and non-irq spinlocks.Ralf Baechle
Mixing of normal and irq spinlocks results in the following lockdep messages on bootup on IP32: [...] Sending DHCP requests . ====================================================== [ INFO: SOFTIRQ-safe -> SOFTIRQ-unsafe lock order detected ] 2.6.30-rc5-00164-g41baeef #30 ------------------------------------------------------ swapper/1 [HC0[0]:SC0[1]:HE0:SE0] is trying to acquire: (&priv->meth_lock){+.+...}, at: [<ffffffff8026388c>] meth_tx+0x48/0x43c and this task is already holding: (_xmit_ETHER#2){+.-...}, at: [<ffffffff802d3a00>] __qdisc_run+0x118/0x30c which would create a new lock dependency: (_xmit_ETHER#2){+.-...} -> (&priv->meth_lock){+.+...} but this new dependency connects a SOFTIRQ-irq-safe lock: (_xmit_ETHER#2){+.-...} ... which became SOFTIRQ-irq-safe at: [<ffffffff80061458>] __lock_acquire+0x784/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 to a SOFTIRQ-irq-unsafe lock: (&priv->meth_lock){+.+...} ... which became SOFTIRQ-irq-unsafe at: ... [<ffffffff800614f8>] __lock_acquire+0x824/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 other info that might help us debug this: 2 locks held by swapper/1: #0: (rcu_read_lock){.+.+..}, at: [<ffffffff802c0954>] dev_queue_xmit+0x1e0/0x4b0 #1: (_xmit_ETHER#2){+.-...}, at: [<ffffffff802d3a00>] __qdisc_run+0x118/0x30c the SOFTIRQ-irq-safe lock's dependencies: -> (_xmit_ETHER#2){+.-...} ops: 0 { HARDIRQ-ON-W at: [<ffffffff800614d0>] __lock_acquire+0x7fc/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 IN-SOFTIRQ-W at: [<ffffffff80061458>] __lock_acquire+0x784/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 INITIAL USE at: [<ffffffff80061570>] __lock_acquire+0x89c/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff802d2b88>] dev_watchdog+0x70/0x398 [<ffffffff800433b8>] run_timer_softirq+0x1a8/0x248 [<ffffffff8003da5c>] __do_softirq+0xec/0x208 [<ffffffff8003dbd8>] do_softirq+0x60/0xe4 [<ffffffff8003dda0>] irq_exit+0x54/0x9c [<ffffffff80004420>] ret_from_irq+0x0/0x4 [<ffffffff80004720>] r4k_wait+0x20/0x40 [<ffffffff80015418>] cpu_idle+0x30/0x60 [<ffffffff804cd934>] start_kernel+0x3ec/0x404 } ... key at: [<ffffffff80cf93f0>] netdev_xmit_lock_key+0x8/0x1c8 the SOFTIRQ-irq-unsafe lock's dependencies: -> (&priv->meth_lock){+.+...} ops: 0 { HARDIRQ-ON-W at: [<ffffffff800614d0>] __lock_acquire+0x7fc/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 SOFTIRQ-ON-W at: [<ffffffff800614f8>] __lock_acquire+0x824/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 INITIAL USE at: [<ffffffff80061570>] __lock_acquire+0x89c/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff800128d0>] _spin_lock+0x30/0x44 [<ffffffff80263f20>] meth_reset+0x118/0x2d8 [<ffffffff8026424c>] meth_open+0x28/0x140 [<ffffffff802c1ae8>] dev_open+0xe0/0x18c [<ffffffff802c1268>] dev_change_flags+0xd8/0x1d4 [<ffffffff804e7770>] ip_auto_config+0x1d4/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 } ... key at: [<ffffffff80cf6ce8>] __key.32424+0x0/0x8 stack backtrace: Call Trace: [<ffffffff8000ed0c>] dump_stack+0x8/0x34 [<ffffffff80060b74>] check_usage+0x470/0x4a0 [<ffffffff80060c34>] check_irq_usage+0x90/0x130 [<ffffffff80061f78>] __lock_acquire+0x12a4/0x1a14 [<ffffffff800627e0>] lock_acquire+0xf8/0x150 [<ffffffff80012a0c>] _spin_lock_irqsave+0x60/0x84 [<ffffffff8026388c>] meth_tx+0x48/0x43c [<ffffffff802d3a38>] __qdisc_run+0x150/0x30c [<ffffffff802c0aa8>] dev_queue_xmit+0x334/0x4b0 [<ffffffff804e7e6c>] ip_auto_config+0x8d0/0xf28 [<ffffffff80012e68>] do_one_initcall+0x58/0x170 [<ffffffff804cd190>] kernel_init+0x98/0x104 [<ffffffff8001520c>] kernel_thread_helper+0x10/0x18 ..... timed out! IP-Config: Retrying forever (NFS root)... Sending DHCP requests ., OK [...] Fixed by converting all locks to irq locks. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Tested-by: Andrew Randrianasulu <randrik_a@yahoo.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-17mlx4_en: Fix not deleted napi structuresYevgeny Petrilin
Napi structures are being created each time we open a port, but when the port is closed the napi structure is only disabled but not removed. This bug caused hang while removing the driver. Signed-off-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-15Merge git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6: iwlwifi: fix device id registration for 6000 series 2x2 devices ath5k: update channel in sw state after stopping RX and TX rtl8187: use DMA-aware buffers with usb_control_msg mac80211: avoid NULL ptr deref when finding max_rates in PID and minstrel airo: airo_get_encode{,ext} potential buffer overflow Pulled directly by Linus because Davem is off playing shuffle-board at some Alaskan cruise, and the NULL ptr deref issue hits people and should get merged sooner rather than later. David - make us proud on the shuffle-board tournament!
2009-05-14wimax/i2400m: fix device crash: fix optimization in _roq_queue_update_wsInaky Perez-Gonzalez
When the i2400m receives data and the device indicates there has to be reordering, we keep an sliding window implementation to sort the packets before sending them to the network stack. One of the "operations" that the device indicates is "queue a packet and update the window start". When the queue is empty, this is equivalent to "deliver the packet and update the window start". That case was optimized in i2400m_roq_queue_update_ws() so that we would not pointlessly queue and dequeue a packet. However, when the optimization was active, it wasn't updating the window start. That caused the reorder management code to get confused later on with what seemed to be wrong reorder requests from the device. Thus the fix implemented is to do the right thing and update the window start in both cases, when the queue is empty (and the optimization is done) and when not. Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
2009-05-12Remove unreached code in drivers/net/mlx4/en_rx.cDan Carpenter
Remove the return after the goto. We want the goto because it frees memory as well as returning err. Found by smatch (http://repo.or.cz/w/smatch.git). Signed-off-by: Dan Carpenter <error27@gmail.com> Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-05-11iwlwifi: fix device id registration for 6000 series 2x2 devicesJay Sternberg
Add device ids for 2x2 devices. Also fix antenna usage because these devices use antennas A and B, not B and C. Signed-off-by: Jay Sternberg <jay.e.sternberg@linux.intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11ath5k: update channel in sw state after stopping RX and TXBob Copeland
This fixes a non-theoretical race condition when transmitting and receiving frames during a scan. If the channel or operating band changes while processing status descriptors in the tasklets, ath5k will incorrectly use the new channel and band when reporting the rates, even if the frame was actually sent on a previous channel. Typically this will manifest as a beacon found on an incorrect frequency and/or a warning in the driver while scanning: [ 4773.891944] cfg80211: Found new beacon on frequency: 5805 MHz (Ch 161) on phy0 [ 4785.461125] ------------[ cut here ]------------ [ 4785.461135] WARNING: at drivers/net/wireless/ath/ath5k/base.c:1141 ath5k_tasklet_rx+0x2ff/0x577 [ath5k]() [ 4785.461143] Hardware name: MacBook1,1 [ 4785.461148] invalid hw_rix: 1b [ 4785.461152] Modules linked in: fuse i915 drm af_packet acpi_cpufreq binfmt_misc dm_mirror dm_region_hash dm_log dm_multipath dm_mod arc4 ecb snd_hda_codec_idt snd_hda_intel snd_hda_codec snd_seq_dummy snd_seq_oss snd_seq_midi_event ath5k snd_seq hid_apple usbhid snd_seq_device mac80211 appletouch snd_pcm_oss sky2 ohci1394 snd_mixer_oss ath ieee1394 snd_pcm bitrev snd_timer cfg80211 crc32 snd snd_page_alloc button processor ac ehci_hcd joydev uhci_hcd sg battery thermal sr_mod cdrom applesmc evdev input_polldev unix [last unloaded: microcode] [ 4785.461296] Pid: 0, comm: swapper Tainted: G W 2.6.30-rc3-wl #112 [ 4785.461302] Call Trace: [ 4785.461316] [<c012590f>] warn_slowpath+0x76/0xa5 [ 4785.461331] [<c0219839>] ? debug_dma_unmap_page+0x5a/0x62 [ 4785.461357] [<f9982f88>] ath5k_tasklet_rx+0x2ff/0x577 [ath5k] [ 4785.461371] [<c01446f7>] ? trace_hardirqs_off+0xb/0xd [ 4785.461381] [<c0129928>] ? __tasklet_schedule+0x6e/0x7c [ 4785.461392] [<c0129b02>] tasklet_action+0x92/0xe5 [ 4785.461402] [<c0129f91>] __do_softirq+0xb1/0x182 [ 4785.461411] [<c012a092>] do_softirq+0x30/0x48 [ 4785.461428] [<c012a20a>] irq_exit+0x3d/0x74 [ 4785.461435] [<c035a0de>] do_IRQ+0x76/0x8c [ 4785.461440] [<c010312e>] common_interrupt+0x2e/0x34 [ 4785.461445] [<c014007b>] ? timer_list_show+0x1ab/0x939 [ 4785.461457] [<f85fd25c>] ? acpi_idle_enter_bm+0x27c/0x2b9 [processor] [ 4785.461463] [<c02d1ed6>] cpuidle_idle_call+0x6a/0x9c [ 4785.461468] [<c0101cc8>] cpu_idle+0x53/0x87 [ 4785.461473] [<c0346584>] rest_init+0x6c/0x6e [ 4785.461479] [<c04df74d>] start_kernel+0x286/0x28b [ 4785.461484] [<c04df037>] __init_begin+0x37/0x3c [ 4785.461487] ---[ end trace aaf8496ba3679dfb ]--- Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11rtl8187: use DMA-aware buffers with usb_control_msgJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-11airo: airo_get_encode{,ext} potential buffer overflowJohn W. Linville
Feeding the return code of get_wep_key directly to the length parameter of memcpy is a bad idea since it could be -1... Reported-by: Eugene Teo <eugeneteo@kernel.sg> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (26 commits) bonding: fix panic if initialization fails IXP4xx: complete Ethernet netdev setup before calling register_netdev(). IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization. ipvs: Fix IPv4 FWMARK virtual services ipv4: Make INET_LRO a bool instead of tristate. net: remove stale reference to fastroute from Kconfig help text net: update skb_recycle_check() for hardware timestamping changes bnx2: Fix panic in bnx2_poll_work(). net-sched: fix bfifo default limit igb: resolve panic on shutdown when SR-IOV is enabled wimax: oops: wimax_dev_add() is the only one that can initialize the state wimax: fix oops if netlink fails to add attribute Bluetooth: Move dev_set_name() to a context that can sleep netfilter: ctnetlink: fix wrong message type in user updates netfilter: xt_cluster: fix use of cluster match with 32 nodes netfilter: ip6t_ipv6header: fix match on packets ending with NEXTHDR_NONE netfilter: add missing linux/types.h include to xt_LED.h mac80211: pid, fix memory corruption mac80211: minstrel, fix memory corruption cfg80211: fix comment on regulatory hint processing ...
2009-05-09Merge branch 'net-fixes' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/chris/linux-2.6
2009-05-09bonding: fix panic if initialization failsFlorian Westphal
If module initialisation failed (e.g. because the bonding sysfs entry cannot be created), kernel panics: IP: [<ffffffff8024910a>] destroy_workqueue+0x2d/0x146 Call Trace: [<ffffffff808268c4>] bond_destructor+0x28/0x78 [<ffffffff80b64471>] netdev_run_todo+0x231/0x25a [<ffffffff80b6dbcd>] rtnl_unlock+0x9/0xb [<ffffffff81567907>] bonding_init+0x83e/0x84a Remove the calls to bond_work_cancel_all() and destroy_workqueue(); both are also called/scheduled via bond_free_all(). bond_destroy_sysfs is unecessary because the sysfs entry has not been created in the error case. Signed-off-by: Florian Westphal <fw@strlen.de> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-09IXP4xx: complete Ethernet netdev setup before calling register_netdev().Krzysztof Hałasa
Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-09IXP4xx: use "ENODEV" instead of "ENOSYS" in module initialization.Krzysztof Hałasa
ENOSYS makes modutils complain about missing kernel module support. Signed-off-by: Krzysztof Hałasa <khc@pm.waw.pl>
2009-05-06bnx2: Fix panic in bnx2_poll_work().Michael Chan
Add barrier() to bnx2_get_hw_{tx|rx}_cons() to fix this issue: http://bugzilla.kernel.org/show_bug.cgi?id=12698 This issue was reported by multiple i386 users. Without barrier(), the compiled code looks like the following where %eax contains the address of the tx_cons or rx_cons in the DMA status block. The status block contents can change between the cmpb and the movzwl instruction. The driver would crash if the value was not 0xff during the cmpb instruction, but changed to 0xff during the movzwl instruction. 6828: 80 38 ff cmpb $0xff,(%eax) 682b: 0f b7 10 movzwl (%eax),%edx With the added barrier(), the compiled code now looks correct: 683d: 0f b7 10 movzwl (%eax),%edx 6840: 0f b6 c2 movzbl %dl,%eax 6843: 3d ff 00 00 00 cmp $0xff,%eax Thanks to Pascal de Bruijn <pmjdebruijn@pcode.nl> for reporting the problem and Holger Noefer <hnoefer@pironet-ndh.com> for patiently testing test patches for us. Also updated version to 2.0.1. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-06igb: resolve panic on shutdown when SR-IOV is enabledAlexander Duyck
The setup_rctl call was making a call into the ring structure after it had been freed. This was causing a panic on shutdown. This call wasn't necessary since it is possible to get the needed index from adapter->vfs_allocated_count. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-05Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-05-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (30 commits) e1000: fix virtualization bug bonding: fix alb mode locking regression Bluetooth: Fix issue with sysfs handling for connections usbnet: CDC EEM support (v5) tcp: Fix tcp_prequeue() to get correct rto_min value ehea: fix invalid pointer access ne2k-pci: Do not register device until initialized. Subject: [PATCH] br2684: restore net_dev initialization net: Only store high 16 bits of kernel generated filter priorities virtio_net: Fix function name typo virtio_net: Cleanup command queue scatterlist usage bonding: correct the cleanup in bond_create() virtio: add missing include to virtio_net.h smsc95xx: add support for LAN9512 and LAN9514 smsc95xx: configure LED outputs netconsole: take care of NETDEV_UNREGISTER event xt_socket: checks for the state of nf_conntrack bonding: bond_slave_info_query() fix cxgb3: fixing gcc 4.4 compiler warning: suggest parentheses around operand of ‘!’ netfilter: use likely() in xt_info_rdlock_bh() ...
2009-05-04e1000: fix virtualization bugJesse Brandeburg
a recent fix to e1000 (commit 15b2bee2) caused KVM/QEMU/VMware based virtualized e1000 interfaces to begin failing when resetting. This is because the driver in a virtual environment doesn't get to run instructions *AT ALL* when an interrupt is asserted. The interrupt code runs immediately and this recent bug fix allows an interrupt to be possible when the interrupt handler will reject it (due to the new code), when being called from any path in the driver that holds the E1000_RESETTING flag. the driver should use the __E1000_DOWN flag instead of the __E1000_RESETTING flag to prevent interrupt execution while reconfiguring the hardware. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-04bonding: fix alb mode locking regressionJay Vosburgh
Fix locking issue in alb MAC address management; removed incorrect locking and replaced with correct locking. This bug was introduced in commit 059fe7a578fba5bbb0fdc0365bfcf6218fa25eb0 ("bonding: Convert locks to _bh, rework alb locking for new locking") Bug reported by Paul Smith <paul@mad-scientist.net>, who also tested the fix. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-04iwlwifi: update key flags at time key is setReinette Chatre
We need to be symmetrical in what is done when key is set and cleared. This is important wrt the key flags as they are used during key clearing and if they are not set when the key is set the key cannot be cleared completely. This addresses the many occurences of the WARN found in iwl_set_tkip_dynamic_key_info() and tracked in http://www.kerneloops.org/searchweek.php?search=iwl_set_dynamic_key If calling iwl_set_tkip_dynamic_key_info()/iwl_remove_dynamic_key() pair a few times in a row will cause that we run out of key space. This is because the index stored in the key flags is used by iwl_remove_dynamic_key() to decide if it should remove the key. Unfortunately the key flags, and hence the key index is currently only set at the time the key is written to the device (in iwl_update_tkip_key()) and _not_ in iwl_set_tkip_dynamic_key_info(). Fix this by setting flags in iwl_set_tkip_dynamic_key_info(). Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-04iwlwifi: remove EXPORT_SYMBOL for static symbolAndreas Schwab
It does not make sense to apply EXPORT_SYMBOL to a static symbol. Fixes this build error: drivers/net/wireless/iwlwifi/iwl3945-base.c:1697: error: __ksymtab_iwl3945_rx_queue_reset causes a section type conflict Signed-off-by: Andreas Schwab <schwab@linux-m68k.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-05-04usbnet: CDC EEM support (v5)Omar Laazimani
This introduces a CDC Ethernet Emulation Model (EEM) host side driver to support USB EEM devices. EEM is different from the Ethernet Control Model (ECM) currently supported by the "CDC Ethernet" driver. One key difference is that it doesn't require of USB interface alternate settings to manage interface state; some maldesigned hardware can't handle that part of USB. It also avoids a separate USB interface for control and status updates. [ dbrownell@users.sourceforge.net: fix skb leaks, add rx packet checks, improve fault handling, EEM conformance updates, cleanup ] Signed-off-by: Omar Laazimani <omar.oberthur@gmail.com> Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-04ehea: fix invalid pointer accessHannes Hering
This patch fixes an invalid pointer access in case the receive queue holds no pointer to the next skb when the queue is empty. Signed-off-by: Hannes Hering <hering2@de.ibm.com> Signed-off-by: Jan-Bernd Themann <themann@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-02ne2k-pci: Do not register device until initialized.Lubomir Rintel
Doing it in reverse order causes uevent to be sent before we have a MAC address, which confuses udev. Signed-off-by: Lubomir Rintel <lkundrak@v3.sk> Acked-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01virtio_net: Fix function name typoAlex Williamson
Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01virtio_net: Cleanup command queue scatterlist usageAlex Williamson
We were avoiding calling sg_init* on scatterlists passed into virtnet_send_command to prevent extraneous end markers. This caused build warnings for uninitialized variables. Cleanup the code to create proper scatterlists. Signed-off-by: Alex Williamson <alex.williamson@hp.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01bonding: correct the cleanup in bond_create()Jiri Pirko
This patch makes the cleanup in bond_create nicer :) Also now the forgotten free_netdev is called. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01smsc95xx: add support for LAN9512 and LAN9514Steve Glendinning
LAN9512 and LAN9514 are USB hubs with an integrated 10/100 ethernet controller. Logically this looks like an ethernet controller (similar to LAN9500) permanently attached to one of the hub's downstream ports. This patch adds the usb device id of the new ethernet controller to the smsc95xx driver. This id is the same in both new devices. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01smsc95xx: configure LED outputsSteve Glendinning
SMSC LAN9500 has dual purpose GPIO/LED pins, and by default at power-on these are configured as GPIOs. This means that if LEDs are fitted they won't ever light. This patch sets them to be LED outputs for speed, duplex and link/activity. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01netconsole: take care of NETDEV_UNREGISTER eventBruno Prémont
When netconsole is loaded and a network interface fades away (e.g. on rmmod $interface_driver_module) the rmmod remains stuck and some locks are taken that prevent any additional module loading/unloading as well as interface up/down changes. In addition kernel logs (and console) get flooded at 10s interval with [ 122.464065] unregister_netdevice: waiting for eth0 to become free. Usage count = 1 [ 132.704059] unregister_netdevice: waiting for eth0 to become free. Usage count = 1 This patch lets netconsole take NETDEV_UNREGISTER event into account and release the affected interface if it was in use. Signed-off-by: Bruno Prémont <bonbons@linux-vserver.org> Acked-by: Matt Mackall <mpm@selenic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01bonding: bond_slave_info_query() fixEric Dumazet
bond_slave_info_query() should keep a read lock while accessing slave info, or risk accessing stale data and corruption. Signed-off-by: Eric Dumazet <dada1@cosmosbay.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-01cxgb3: fixing gcc 4.4 compiler warning: suggest parentheses around operand ↵Sergey Senozhatsky
of ‘!’ Trivial: fixing gcc 4.4 compiler warning: drivers/net/cxgb3/t3_hw.c: In function ‘t3_prep_adapter’: drivers/net/cxgb3/t3_hw.c:3782: warning: suggest parentheses around operand of ‘!’ or change ‘|’ to ‘||’ or ‘!’ to ‘~’ Signed-off-by: Sergey Senozhatsky <sergey.senozhatsky@mail.by> Signed-off-by: David S. Miller <davem@davemloft.net>