aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-02-05ixgbe: Fix pause code for ethtoolAyyappan Veeraiyan
Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05ixbge: Make ethtool code account for media typesAyyappan Veeraiyan
The i82598 can support various media types but this ethtool code only was coded for fiber just yet. Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05ixbge: remove TX lock and redo TX accounting.Ayyappan Veeraiyan
This ports Herbert Xu's "maybe_stop_tx" code and removes the tx_lock which is not needed. Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05ixgbe: remove obsolete irq_sem, add driver state checking codeAyyappan Veeraiyan
After testing we confirmed that the irq_sem can safely be removed from ixgbe. Add strict state checking code to various ethtool parts to properly protect against races between various driver reset paths. Signed-off-by: Ayyappan Veeraiyan <ayyappan.veeraiyan@intel.com> Signed-off-by: Auke Kok <auke-jan.h.kok@intel.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05xircom_cb should return NETDEV_TX_BUSY when no descriptors availableErik Mouw
Changes in other networking paths uncovered a bug in the xircom_cb driver which made the kernel spew lots of the following error messages: BUG eth1 code -5 qlen 0 It turned out that the driver returned -EIO when there was no descriptor available for sending packets. It should return NETDEV_TX_BUSY instead. This was discussed on the netdev list before, see http://thread.gmane.org/gmane.linux.network/84603 . Signed-off-by: Erik Mouw <mouw@nl.linux.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05drivers/net/tlan.c: compilation warning fixLeonardo Potenza
Add a check for the pci_register_driver() return value. Removed unused variable pad_allocated. The aim of this patch is to remove the following warning messages: drivers/net/tlan.c: In function 'tlan_probe': drivers/net/tlan.c:486: warning: ignoring return value of 'pci_register_driver', declared with attribute warn_unused_result Signed-off-by: Leonardo Potenza <lpotenza@inwind.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05mv643xx_eth: fix byte order when checksum offload is enabledByron Bradley
The Marvell Orion system on chips have an integrated mv643xx MAC. On these little endian ARM devices mv643xx will oops when checksum offload is enabled. Swapping the byte order of the protocol and checksum solves this problem. Signed-off-by: Byron Bradley <byron.bbradley@gmail.com> Cc: Dale Farnsworth <dale@farnsworth.org> Cc: Manish Lachwani <mlachwani@mvista.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05sky2: fix for Yukon FE (regression in 2.6.25)Stephen Hemminger
The Yukon FE chip has a ram buffer therefore it needs the alignment restriction and hang check workarounds. Therefore: * Autodetect the prescence/absence of ram buffer * Rename the flag value to reflect this * Use it consistently (ie don't reread register) Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-05iSeries: fix section mismatch in iseries_vethStephen Rothwell
WARNING: vmlinux.o(.text+0x25dca0): Section mismatch in reference from the function .veth_probe() to the function .init.text:.veth_probe_one() Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: (25 commits) virtio: balloon driver virtio: Use PCI revision field to indicate virtio PCI ABI version virtio: PCI device virtio_blk: implement naming for vda-vdz,vdaa-vdzz,vdaaa-vdzzz virtio_blk: Dont waste major numbers virtio_blk: provide getgeo virtio_net: parametrize the napi_weight for virtio receive queue. virtio: free transmit skbs when notified, not on next xmit. virtio: flush buffers on open virtnet: remove double ether_setup virtio: Allow virtio to be modular and used by modules virtio: Use the sg_phys convenience function. virtio: Put the virtio under the virtualization menu virtio: handle interrupts after callbacks turned off virtio: reset function virtio: populate network rings in the probe routine, not open virtio: Tweak virtio_net defines virtio: Net header needs hdr_len virtio: remove unused id field from struct virtio_blk_outhdr virtio: clarify NO_NOTIFY flag usage ...
2008-02-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: (79 commits) Jesper Juhl is the new trivial patches maintainer Documentation: mention email-clients.txt in SubmittingPatches fs/binfmt_elf.c: spello fix do_invalidatepage() comment typo fix Documentation/filesystems/porting fixes typo fixes in net/core/net_namespace.c typo fix in net/rfkill/rfkill.c typo fixes in net/sctp/sm_statefuns.c lib/: Spelling fixes kernel/: Spelling fixes include/scsi/: Spelling fixes include/linux/: Spelling fixes include/asm-m68knommu/: Spelling fixes include/asm-frv/: Spelling fixes fs/: Spelling fixes drivers/watchdog/: Spelling fixes drivers/video/: Spelling fixes drivers/ssb/: Spelling fixes drivers/serial/: Spelling fixes drivers/scsi/: Spelling fixes ...
2008-02-04virtio_net: parametrize the napi_weight for virtio receive queue.Dor Laor
It is done in order to improve performance. Signed-off-by: Dor Laor <dor.laor@qumranet.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04virtio: free transmit skbs when notified, not on next xmit.Rusty Russell
This fixes a potential dangling xmit problem. We also suppress refill interrupts until we need them. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04virtio: flush buffers on openRusty Russell
Fix bug found by Christian Borntraeger: if the other side fills all the registered network buffers before we enable NAPI, we will never get an interrupt. The simplest fix is to process the input queue once on open. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04virtnet: remove double ether_setupChristian Borntraeger
Hello Rusty, virtnet_probe already calls alloc_etherdev, which calls ether_setup. There is no need to do that again. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04virtio: Put the virtio under the virtualization menuAnthony Liguori
This patch moves virtio under the virtualization menu and changes virtio devices to not claim to only be for lguest. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04virtio: reset functionRusty Russell
A reset function solves three problems: 1) It allows us to renegotiate features, eg. if we want to upgrade a guest driver without rebooting the guest. 2) It gives us a clean way of shutting down virtqueues: after a reset, we know that the buffers won't be used by the host, and 3) It helps the guest recover from messed-up drivers. So we remove the ->shutdown hook, and the only way we now remove feature bits is via reset. We leave it to the driver to do the reset before it deletes queues: the balloon driver, for example, needs to chat to the host in its remove function. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04virtio: populate network rings in the probe routine, not openRusty Russell
Since we want to reset the device to remove them, this is simpler (device is reset for us on driver remove). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04virtio: Tweak virtio_net definesRusty Russell
1) Turn GSO on virtio net into an all-or-nothing (keep checksumming separate). Having multiple bits is a pain: if you can't support something you should handle it in software, which is still a performance win. 2) Make VIRTIO_NET_HDR_GSO_ECN a flag in the header, so it can apply to IPv6 or v4. 3) Rename VIRTIO_NET_F_NO_CSUM to VIRTIO_NET_F_CSUM (ie. means we do checksumming). 4) Add csum and gso params to virtio_net to allow more testing. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04virtio: Net header needs hdr_lenRusty Russell
It's far easier to deal with packets if we don't have to parse the packet to figure out the header length to know how much to pull into the skb data. Add the field to the virtio_net_hdr struct (and fix the spaces that somehow crept in there). Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04virtio: explicit enable_cb/disable_cb rather than callback return.Rusty Russell
It seems that virtio_net wants to disable callbacks (interrupts) before calling netif_rx_schedule(), so we can't use the return value to do so. Rename "restart" to "cb_enable" and introduce "cb_disable" hook: callback now returns void, rather than a boolean. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04virtio: simplify config mechanism.Rusty Russell
Previously we used a type/len pair within the config space, but this seems overkill. We now simply define a structure which represents the layout in the config space: the config space can now only be extended at the end. The main driver-visible changes: 1) We indicate what fields are present with an explicit feature bit. 2) Virtqueues are explicitly numbered, and not in the config space. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2008-02-04virtio: Implement skb_partial_csum_set, for setting partial csums on ↵Rusty Russell
untrusted packets. Use it in virtio_net (replacing buggy version there), it's also going to be used by TAP for partial csum support. Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Acked-by: David S. Miller <davem@davemloft.net>
2008-02-03MAINTAINERS: remove Adam Fritzler, remove his email address in other sourcesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03Spelling fixes: lenght->lengthPaulius Zaleckas
Signed-off-by: Paulius Zaleckas <pauliusz@yahoo.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03Fix a small number of "memeber" typoes.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2008-02-03Merge branch 'fixes' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-02-03EMAC driver: Fix bug: The clock divisor is set to all ones at reset.Bryan Wu
Signed-off-by: Kalle Pokki <kalle.pokki@eke.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03EMAC driver: fix bug - invalidate data cache of new_skb->data range when ↵Alexey Demin
cache is WB It prevents overwritting new data from DMA. Signed-off-by: Alexey Demin <bf53x@ya.ru> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03EMAC driver: add power down modeVitja Makarov
This patch puts phy in power-down mode when interface is down. Also we should think about energy detect power-down mode, that will decrease power consumption when no link. Signed-off-by: Vitja Makarov <vitja.makarov@gmail.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03EMAC driver: ADSP-BF52x arch/mach supportMichael Hennerich
Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03EMAC driver: use simpler comment headers and strip out information that is ↵Mike Frysinger
maintained in the scm's log Signed-off-by: Mike Frysinger <michael.frysinger@analog.com> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03EMAC driver: bf537 MAC multicast hash filtering patchAidan Williams
The bf537 Ethernet MAC driver in the 2007R1.1-RC3 kernel (and the current kernel) do not implement multicast hash filtering. This is a performance problem if you have lots of multicast on your network. This patch plugs the right bits into the multicast hash registers. Signed-off-by: Aidan Williams <aidan@nicta.com.au> Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03EMAC driver: define MDC_CLK=2.5MHz and caculate mdc_div according to SCLK.Bryan Wu
Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03EMAC driver: shorten the mdelay value to solve netperf performance issueBryan Wu
Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03[netdrvr] sis190: build fixJeff Garzik
Fix PCI table section type conflict, by removing __devinitdata. Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03sky2: fix Wake On Lan interaction with BIOSStephen Hemminger
This patch disables config mode access after clearing PCI settings. Some BIOS's seem to not do WOL if config bit still set. Fixes: http://bugzilla.kernel.org/show_bug.cgi?id=9721 Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03sky2: restore multicast addresses after recoveryStephen Hemminger
If the sky2 deadman timer forces a recovery, the multicast hash list is lost. Move the call to sky2_set_multicast to the end of sky2_up() so all paths that bring device up will restore multicast. Signed-off-by: Stephen Hemminger <shemminger@linux-foundation.org> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03pci-skeleton: Misc fixes to build neatlyJike Song
The pci-skeleton.c has several problems with compilation, such as missing args when calling synchronize_irq(). Fix it. Signed-off-by: Jike Song <albcamus@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03phylib: Add Realtek 821x eth PHY supportJohnson Leung
this PHY present on the MPC8315E and MPC837xE RDB boards. Signed-off-by: Johnson Leung <r58129@freescale.com> Signed-off-by: Kevin Lam <r43770@freescale.com> Signed-off-by: Joe D'Abbraccio <ljd015@freescale.com> Signed-off-by: Kim Phillips <kim.phillips@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03natsemi: Update locking documentationMark Brown
The documentation regarding synchronisation at the head of the natsemi driver was badly bitrotted so replace it with a general statement about the techniques used which is less likely to bitrot. Also remove the note saying these chips are uncommon - it makes little difference but they were used in a number of laptops and at least one mass market PCI ethernet card. Signed-off-by: Mark Brown <broonie@sirena.org.uk> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03PHYLIB: Locking fixes for PHY I/O potentially sleepingNate Case
PHY read/write functions can potentially sleep (e.g., a PHY accessed via I2C). The following changes were made to account for this: * Change spin locks to mutex locks * Add a BUG_ON() to phy_read() phy_write() to warn against calling them from an interrupt context. * Use work queue for PHY state machine handling since it can potentially sleep * Change phydev lock from spinlock to mutex Signed-off-by: Nate Case <ncase@xes-inc.com> Acked-by: Andy Fleming <afleming@freescale.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03forcedeth: mac address mcp77/79Ayaz Abdulla
This patch is a critical fix for MCP77 and MCP79 devices. The feature flags were missing the define for correct mac address (DEV_HAS_CORRECT_MACADDR). Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03forcedeth: multicast fixAyaz Abdulla
This patch fixes the case where no multicast addresses are requested to be added to the multicast filter. The multicast mask must be set to all 1's instead of all 0's. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03forcedeth: tx pause fixAyaz Abdulla
This patch fixes the tx pause enable watermark flags. The new values where determined to be optimal during testing. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03forcedeth: updated copyright sectionAyaz Abdulla
This patch updates the copyright section to include 2007 and 2008. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03forcedeth: checksum fixAyaz Abdulla
The driver should inform the stack when checksum has been performed by the HW when both IP and TCP (or UDP) checksum flags are indicated by HW. Previously, it would also inform the stack when only IP checksum flag was indicated by HW. This can cause data corruption when IP fragments are used. The IP Identification field can wrap around and cause data from new fragments to fill into older fragment slots with same IP Id. The stack would then not perform TCP/UDP checksum (after re-assembly of all fragments) since driver falsely stated it was already calculated. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03forcedeth: reset register fixAyaz Abdulla
This patch fixes the reset register definition from 0x3C to 0x34. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03drivers/net/arm/at91_ether.c: logical/bitand typo in function reset_phy()Roel Kluin
include/linux/mii.h:48:#define BMCR_RESET 0x8000 The function reset_phy() is in "#if 0" inactivated code Replace logical "&&" by bit "&" before BMCR_RESET Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-02-03cxgb3: Remove incorrect __devinit annotationsRoland Dreier
When PCI error recovery was added to cxgb3, a function t3_io_slot_reset() was added. This function can call back into t3_prep_adapter() at any time, so t3_prep_adapter() can no longer be marked __devinit. This patch removes the __devinit annotation from t3_prep_adapter() and all the functions that it calls, which fixes WARNING: drivers/net/cxgb3/built-in.o(.text+0x2427): Section mismatch in reference from the function t3_io_slot_reset() to the function .devinit.text:t3_prep_adapter() Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 04:14:15 +0000