aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-12-12sfc: Clean up board identificationBen Hutchings
Remove kluge for development boards with unspecified board type. Remove assumption of contiguous board type code assignments. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Add phy_type device attributeBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Add support for MMDs numbered >15Ben Hutchings
Combine DEVS0 and DEVS1 registers into a 32-bit mask instead of reading just DEVS0. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Remove MII extension cruftBen Hutchings
Replace efx_nic::link_options bitfield with link_speed (speed in Mbit/s) and link_fd (full duplex flag). Remove broken auto-negotiation functions. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Don't count RX checksum errors during loopback self-testBen Hutchings
The loopback self-test checks that IP packets with incorrect checksums are not altered when sent on a queue with checksum generation off. These should not contribute to RX error statistics. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Abbreviate self-test names so they are not truncatedBen Hutchings
Change "channel" to "chan". Shorten PHY loopback names. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Provide hints to irqbalance daemonBen Hutchings
Allocate IRQs with the name format <device>[-<type>]-<number> so that future versions of irqbalanced understand what we're doing. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Add option to use a separate channel for TX completionsNeil Turton
In a bidirectional forwarding test, we find that the best performance is achieved by sending the TX completion interrupts from one NIC to a CPU which shares an L2 cache with RX completion interrupts from the other NIC. To facilitate this, add an option (through a module parameter) to create separate channels for RX and TX completion with separate IRQs when MSI-X is available. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Restore phy_flash_cfg module parameterBen Hutchings
This is needed for recovery in case a PHY firmware upgrade is aborted. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Work around unreliable strap pinsBen Hutchings
The SFC4000 has strap pins indicating the presence of SPI flash and/or EEPROM. These pins are also used for GPIO, and in some cases they may be read wrongly at reset. However, on production boards it must boot from one or the other device, so we can assume the boot device is present and read the board config from there. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Clean up waits for flash/EEPROM operationsBen Hutchings
Make falcon_spi_wait() ignore the write timer - it is only relevant to write commands, it only works for the device that contains VPD, and it might not be initialised properly at all. Rename falcon_spi_fast_wait() to falcon_spi_wait_write(), reflecting its use, and make it wait up to 10 ms (not 1 ms) since buffered writes to EEPROM may take this long to complete. Make both wait functions sleep instead of busy-waiting. Replace wait for command completion at top of falcon_spi_cmd() with a single poll; no command should be running when the function starts. Correct some comments. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Make reset_workqueue driver-global rather than per-NICSteve Hodgson
Each reset is serialised by the rtnl_lock anyway, so there's no win per-NIC. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Correct interpretation of second param to ethtool phys_id()Ben Hutchings
A value of 0 means indefinite repetition (until interrupted). Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Remove unneeded register writeBen Hutchings
This was only ever needed for an FPGA version of Falcon. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Change SPI lengths to type size_tBen Hutchings
Based on a patch by Andrew Morton. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-12sfc: Board support fixesBen Hutchings
Set dummy monitor method for unrecognised boards. Clean up board resources if efx_pci_probe_main() fails after board has been initialised. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-11net: Add support for the KS8695 ethernet devices.Daniel Silverstone
Implements the KS8695 ethernet device (ks8695net). This driver is only of use on the KS8695 which is an ARM9 based SoC. The documentation on this SoC is sparse and poor, with barely a register description and a rough outline of how the ethernet works, this driver was therefore written with strong reference to the Micrel supplied Linux 2.6.9 port, and to Andrew Victor's ks8695eth driver. Signed-off-by: Daniel Silverstone <dsilvers@simtec.co.uk> Signed-off-by: Vincent Sanders <vince@simtec.co.uk> Acked-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-11tc35815: Enable StripCRC featureAtsushi Nemoto
The chip can strip CRC automatically on receiving. Enable it. Also fix potential RX_BUF_SIZE calculation bug which was obscured by alignment. And use proper symbols (NET_IP_ALIGN, ETH_FCS_LEN, etc.) instead of magic numbers. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-11smsc9420: SMSC LAN9420 10/100 PCI ethernet adapterSteve Glendinning
This patch adds a driver for the LAN9240 PCI ethernet adapter. Changes since initial submission: - debug msg_level has been changed to use standard definitions - convert to use net_device_ops Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-11igb: fixup AER with proper error handlingJeff Kirsher
Based on Peter Waskiewicz patch for ixgbe. Add error handling based on Hemminger's recommendation. Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10smsc911x: add dynamic bus configurationSteve Glendinning
Convert the driver to select 16-bit or 32-bit bus access at runtime, at a small performance cost. Signed-off-by: Steve Glendinning <steve.glendinning@smsc.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10ixgbe: Implement PCIe AER supportPeter P Waskiewicz Jr
This patch implements the PCIe Advanced Error Reporting callbacks in ixgbe. The 82598 hardware supports AER, so we enable it. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10igb: Correctly determine pci-e function number in virtual environmentAlexander Duyck
When running in a virtual environment the ports of an 82575/6 can appear to be single function devices which is not correct. To resolve this we rely on the function number stored in the status register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-10igb: update handling of RCTL for smaller buffer sizesAlexander Duyck
As we begin to move into virtualization the use of a global value for buffer sizes becomes undesirable. This change makes it so only 256 and 512 byte buffers require use of the RCTL register. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: turn all bond_parm_tbls constHolger Eitzenberger
Turn all bond_parm_tbls const. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: make tbl argument to bond_parse_parm() constHolger Eitzenberger
bond_parse_parm() parses a parameter table for a particular value and is therefore not modifying the table at all. Therefore make the 2nd argument const, thus allowing to make the tables const later. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: remove duplicate declarationsHolger Eitzenberger
Remove some declarations from bonding.c as they are declared in bonding.h already. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: use pr_debug instead of own macrosHolger Eitzenberger
Use pr_debug() instead of own macros. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: fix compile error if debug enabledHolger Eitzenberger
This is what I get if debug is enabled: drivers/net/bonding/bond_ipv6.c: In function 'bond_na_send': drivers/net/bonding/bond_ipv6.c:75: error: 'slave' undeclared (first use in this function) drivers/net/bonding/bond_ipv6.c:75: error: (Each undeclared identifier is reported only once drivers/net/bonding/bond_ipv6.c:75: error: for each function it appears in.) This patch fixes that. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: use table for mode namesHolger Eitzenberger
Use a small array in bond_mode_name() for the names, thus saving some space: before text data bss dec hex filename 57736 9372 344 67452 1077c drivers/net/bonding/bonding.ko after text data bss dec hex filename 57441 9372 344 67157 10655 drivers/net/bonding/bonding.ko Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09bonding: add and use bond_is_lb()Holger Eitzenberger
Introduce and use bond_is_lb(), it is usefull to shorten the repetitive check for either ALB or TLB mode. Signed-off-by: Holger Eitzenberger <holger@eitzenberger.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09phy: Add LSI ET1011C PHY driverChaithrika U S
Adds LSI ET1011C PHY driver. This driver is used by TI DM646x EVM. Signed-off-by: Chaithrika U S <chaithrika@ti.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-09myri10ge: check fragmentation in LRO get_frag_header()Brice Goglin
Add a fragmentation check to myri10ge's LRO get_frag_header() callback. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Andrew Gallatin <gallatin@myri.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08hydra: fix compilationAlexey Dobriyan
drivers/net/hydra.c:163: error: 'hydra_netdev_ops' undeclared (first use in this function) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-08netdevice: Kill netdev->privWang Chen
This is the last shoot of this series. After I removing all directly reference of netdev->priv, I am killing "priv" of "struct net_device" and fixing relative comments/docs. Anyone will not be allowed to reference netdev->priv directly. If you want to reference the memory of private data, use netdev_priv() instead. If the private data is not allocted when alloc_netdev(), use netdev->ml_priv to point that memory after you creating that private data. Signed-off-by: Wang Chen <wangchen@cn.fujitsu.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-06net: Fix incorrect use of loose in spider_net.cNick Andrew
Fix incorrect use of loose in spider_net.c It should be 'lose', not 'loose'. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-05Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-core.c drivers/net/wireless/iwlwifi/iwl-sta.c
2008-12-05tty: driverdata and discdata are void *Alan Cox
Remove all the extra casting while we are cleaning up Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-05tty: Flags should be accessed via the foo_bit interfacesAlan Cox
We have various drivers that poke around directly and we need to clean this up before it causes problems. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-05Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2008-12-05igb/e1000e: Naming interrupt vectorsAlexander Duyck
Change interrupt vector naming to match recent changes from Robert Olsson. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Acked-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-12-05ath9k: Use GFP_ATOMIC when allocating TX private areaLuis R. Rodriguez
Using GFP_KERNEL was wrong and produces a 'scheduling while atomic' bug as we're in a tasklet. Also, check for proper return values now, in case allocation fails and be sure to stop the TX queue in case of memory issues but gaurantee the TX queue will eventually be woken up. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05ath9k: Check for pci_map_single() errorsLuis R. Rodriguez
pci_map_single() can fail so detect those errors with pci_dma_mapping_error() and deal with them accordingly. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Correctly initialize AID during set_key()Ivo van Doorn
Request the AID from hardware and provide this id to the driver (in case they need it). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Move crypto TX descriptor handling to rt2x00crypto.cIvo van Doorn
Move all code which determines the right TX descriptor fields specific to crypto support into rt2x00crypto.c. This makes the code in rt2x00queue more simpler and better concentrates all crypto code into a single location. With this we can also remove some ifdefs in rt2x00queue.c since the code inside the ifdef is either very small, or only calling empty functions (see empty function definitions in rt2x00lib.h). Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Fix check for BSS info changesIvo van Doorn
Fix ERP configuration, due to a too strict changes flags checking we never updated the short slot time or basic rate mask when no other changes were made at the same time. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05generic swap(): ath9k: rename swap() to swap_array()Wu Fengguang
In preparation for the introduction of a generic swap() macro. Signed-off-by: Wu Fengguang <fengguang.wu@intel.com> Cc: Sujith Manoharan <Sujith.Manoharan@atheros.com> Cc: Luis R. Rodriguez <lrodriguez@atheros.com> Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Cc: Senthil Balasubramanian <senthilkumar@atheros.com> Cc: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05rt2x00: Add RXDONE_CRYPTO_IV/ICV flagsIvo van Doorn
Drivers should notify rt2x00lib when they provide the IV/ICV data. This adds some flexibility to drivers which can't provide all information. * rt2500usb provides ICV inside the frame * rt2800pci doesn't provide IV/ICV * rt2800usb doesn't provide IV/ICV Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwl3945 : Fix a-band association for passive channelsAbhijeet Kolekar
Patch does following things 1) This patch fixes the a-band association for passive channels with new uCode feature that it allows direct scan on passive channels after auto-switch from passive to active. This enables sending of direct probes on passive channels, as long as some traffic is detected on that channel. This improves the scanning for hidden SSIDs in A-band,which is all passive channels. This patch fixes the bug no 1748. http://www.intellinuxwireless.org/bugzilla/show_bug.cgi?id=1748 2) This fix will only work with uCode version 15.28.2.8 and above. Prior versions of uCode would work only if we heard the traffic within active dwell time, which is much shorter than passive dwell time and is shorter than typical beacon periods. This patch also provids full active dwell time even if we hear traffic late in passive dwell. 3) uCode API version is incremented to 2. Signed-off-by: Abhijeet Kolekar <abhijeet.kolekar@intel.com> Signed-off-by: Zhu Yi <yi.zhu@intel.com> Acked-by: Ben Cahill <ben.m.cahill@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-12-05iwlwifi: rely on API version read from firmwareReinette Chatre
This adds the infrastructure to support older firmware APIs. The API version number is stored as part of the filename, we first try to load the most recent firmware and progressively try lower versions. The API version is also read from the firmware self and stored as part of the iwl_priv structure. Only firmware that is supported by driver will be loaded. The version number read from firmware is compared to supported versions in the driver not the API version used as part of filename. An example using this new infrastrucure: if (IWL_UCODE_API(priv->ucode_ver) >= 2) { Driver interacts with Firmware API version >= 2. } else { Driver interacts with Firmware API version 1. } Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-28 06:53:16 +0000