aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2005-10-18[PATCH] SMACK support for mkissRalf Baechle
SMACK (Stuttgart Modified Amateurradio CRC KISS) is a KISS variant that uses CRC16 checksums to secure data transfers between the modem and host. It's also used to communicate over a pty to applications such as Wampes. Patches for Linux 2.4 by Thomas Osterried DL9SAU, upgraded to the latest mkiss 2.6 mkiss driver by me. Signed-off-by: Thomas Osterried DL9SAU <thomas@x-berg.in-berlin.de> Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18[PATCH] rcu in bpqether driver.Ralf Baechle
From Suzanne Wood <suzannew@cs.pdx.edu>: Clarify RCU implementation in bpqether.c. Because bpq_new_device() calls list_add_rcu() and bpq_free_device() calls list_del_rcu(), substitute list_for_each_entry_rcu() for list_for_each_entry() in bpq_get_ax25_dev() and in bpq_seq_start(). Add rcu dereference protection in bpq_seq_next(). The rcu_read_lock()/unlock() in bpq_device_event() are removed because netdev event handlers are called with RTNL locking in place. FYI: bpq_free_device() calls list_del_rcu() which, per list.h, requires synchronize_rcu() which can block or call_rcu() or call_rcu_bh() which cannot block. Herbert Xu notes that synchronization is done here by unregister_netdevice(). This calls synchronize_net() which in turn uses synchronize_rcu(). Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-18[PATCH] S2io: Offline diagnostics fixesravinandan.arakali@neterion.com
This patch fixes the following bugs with offline diagnostics code(run with "ethtool -t"). 1. After running offline diagnostics, adapter would report corrupted packets on receive. This was because of adapter not being brought out of "RLDRAM test mode". 2. Current EEPROM test works only for Xframe I. Since Xframe II uses different interface(SPI), support for this interface has been added. Also, since SPI supports write access to all areas of EEPROM, negative testing is done only for Xframe I. 3. Return values from subfunctions of offline diagnostics have been corrected. 4. In register test, expected value from rx_queue_cfg register is made to depend on adapter type. 5. After the test, need to restore values at EEPROM offsets 0x4F0 and 0x7F0. These locations were modified as part of test. 6. Use macro SPECIAL_REG_WRITE for write access to mc_rldram_test_ctrl register. Also, couple of unnecessary writes to mc_rldram_test_ctrl have been removed. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-14[PATCH] wireless/airo: Build fixMatteo Croce
The aironet PCI driver has a build dependency on ISA that prevent the driver to compile on systems that doesn't support ISA, like x86_64. The driver really doesn't depend on ISA, it does some ISA stuff in the initialization code, since the driver supports both ISA and PCI cards. So the driver should depend on ISA_DMA_API to build on all systems, and this will not hurt PCI at all. Signed-off-by: Matteo Croce <3297627799@wind.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-13Merge branch 'master'Jeff Garzik
2005-10-11e100: revert CPU cycle saver microcode, it causes severe problemsJeff Garzik
for certain NICs Reverting 685fac63f5ca6c5ca06bab641e1a32bbf9287e89: > [PATCH] e100: CPU cycle saver microcode > > > Add cpu cycle saver microcode to 8086:{1209/1229} other than ICH devices. > > Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> > Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> > Signed-off-by: John Ronciak <john.ronciak@intel.com> > Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-08[PATCH] gfp flags annotations - part 1Al Viro
- added typedef unsigned int __nocast gfp_t; - replaced __nocast uses for gfp flags with gfp_t - it gives exactly the same warnings as far as sparse is concerned, doesn't change generated code (from gcc point of view we replaced unsigned int with typedef) and documents what's going on far better. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-06Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2005-10-05Merge branch 'master'Jeff Garzik
2005-10-04[BONDING]: fix sparse gfp nocast warningsRandy Dunlap
Fix implicit nocast warnings in bonding code: drivers/net/bonding/bond_main.c:1302:49: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-04[PATCH] orinoco: Information leakage due to incorrect paddingPavel Roskin
The orinoco driver can send uninitialized data exposing random pieces of the system memory. This happens because data is not padded with zeroes when its length needs to be increased. Reported by Meder Kydyraliev <meder@o0o.nu> Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04[PATCH] bogus kfree() in ibmtrAl Viro
On several failure exits in ibmtr we end up doing kfree() on dev->priv, with dev allocated by alloc_trdev() and ->priv never reassigned. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-04[wireless ipw2200] remove redundant return statementMateusz Berezecki
2005-10-04[PATCH] bonding: replicate IGMP traffic in activebackup modeJohn W. Linville
Replicate IGMP frames across all slaves in activebackup mode. This ensures fail-over is rapid for multicast traffic as well. Otherwise, multicast traffic will be lost until the next IGMP membership report poll timeout. This is conceptually similar to the treatment of IGMP traffic in bond_alb_xmit. In that case, IGMP traffic transmitted on any slave is re-routed to the active slave in order to ensure that multicast traffic continues to be directed to the active receiver. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04[netdrvr s2io] Add a MODULE_VERSION entryJohn Linville
2005-10-04[PATCH] s2io: change strncpy length arg to use size of targetJohn W. Linville
Use the size of the target array for the length argument to strncpy instead of the size of the source or a magic number. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04airo: fix resumeMichal Schmidt
Cisco Aironet doesn't resume properly from swsusp, because the resume method confuses a PM_EVENT_* for a PCI power state. It thinks that it is resuming from PCI_D1 and doesn't do the necessary initialization of the card. Signed-off-by: Michal Schmidt <xschmi00@stud.feec.vutbr.cz>
2005-10-04[PATCH] AX.25: Convert mkiss.c to DEFINE_RWLOCKRalf Baechle
Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> drivers/net/hamradio/mkiss.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04[PATCH] AX.25: Delete debug printk from mkiss driverRalf Baechle
Signed-off-by: Ralf Baechle DL5RB <ralf@linux-mips.org> -- drivers/net/hamradio/mkiss.c | 1 - 1 files changed, 1 deletion(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04e1000: fix warningsJeff Garzik
2005-10-04e1000: Flush shadow RAMMallikarjuna R Chilakala
Flush shadow RAM to save updates to ASF related bits for 82573 controllers. These bits are past the first 63 words of NVM. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04e1000: Added msleep_interruptible delayMallikarjuna R Chilakala
added msleep_interruptible delay right before returning from diag_test to allow the phy to recover from reset Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04e1000: Fixes for packet split related issuesMallikarjuna R Chilakala
Fixes for packet split related issues * On platforms where PAGE_SIZE > 4K, driver will use only required number of pages compared to always using 3 pages. * Packet split won't be used if the PAGE_SIZE is > 16K * Adds a statistics counter to splits. * Setting the non Null ptr to zero sized buffers to solve packet split receive descriptor error * When the no of pages needed is calculated, the header buffer is not included for a given MTU. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04e1000: Enable custom configuration bits for 82571/2 controllersMallikarjuna R Chilakala
Enable custom configuration bits for 82571/2 controllers. The bits are required for correct functionality of these controllers. Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04e1000: implementation of the multi-queue featureMallikarjuna R Chilakala
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04e1000: multi-queue defines/modification to data structuresMallikarjuna R Chilakala
defines/modifies data structures, function prototypes and changes to the driver rendering it capable of handling <n> tx/rx queues Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04e1000: Support for 82571 and 82572 controllersMallikarjuna R Chilakala
Signed-off-by: Mallikarjuna R Chilakala <mallikarjuna.chilakala@intel.com> Signed-off-by: Ganesh Venkatesan <ganesh.venkatesan@intel.com> Signed-off-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04[PATCH] S2io: MSI/MSI-X support (runtime configurable)Ravinandan Arakali
This patch adds support for MSI/MSI-X feature to the driver. It is a runtime parameter(for now, loadable parameter). Default is INTA. Patch has been tested on IA64 platform with Xframe II adapter, both of which support MSI-X feature. An improvement of about 7% in throughput(both Tx and Rx) was observed and a reduction by 7% in CPU utilization during Tx test. Signed-off-by: Ravinandan Arakali <ravinandan.arakali@neterion.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04Merge branch 'upstream-fixes'Jeff Garzik
2005-10-04[PATCH] sungem: fix gfp flags typeRandy Dunlap
Fix nocast sparse warnings in sungen: drivers/net/sungem.h:1040:45: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-04[PATCH] ns83820: fix gfp flags typeRandy Dunlap
Fix implicit nocast warnings in ns83820 code, including __nocast: drivers/net/ns83820.c:603:46: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[netdrvr starfire] fix highmem and broken firmware issuesIon Badulescu
Unfortunately, [your patch] might address the crash but doesn't address the real problem. It turns out that the problem is one of padding (the firmware cksum engine works only on 32-bit chunks, yuck), so the special casing for length == 1 wasn't sufficient anyway. This patch addresses the issue, as well the other issue of i386 + CONFIG_HIGHMEM being broken. It is pretty much the same workaround that Adaptec themselves used in their Windows driver. I have yet to check if it fixes the problem when the skb is non-linear, but this patch _will_ solve the problem for 99% of the users out there (those not using sendfile). Signed-off-by: Ion Badulescu <ionut@badula.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[PATCH] net/Kconfig: convert pocket_adapter ISA to PARPORTGrant Coady
This patch changes pocket and parallel adaptors to depend on PARPORT instead of ISA in order to get the option in newer SuperIO based systems. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[PATCH] emac: add support for platform-specific unsupported PHY featuresWade Farnsworth
This patch adds support to the ibm_emac driver for platform-specific unsupported PHY features. The patch attempts to determine the highest speed and duplex when autonegotiation is unsupported. Signed-off-by: Wade Farnsworth <wfarnsworth@mvista.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[PATCH] tulip DC21143 rev 48 10Mbit HDX fixPhilippe De Muyter
The patch below is necessary to allow my Digital DS21143 Tulip rev 48 ethernet interface to work in a 10Mbit Half Duplex network. Without it, the driver keeps retrying other modes in an endless loop. It seems like someone already had the same problem with a rev 65 board :) Signed-off-by: Philippe De Muyter <phdm@macqel.be> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[PATCH] fix bonding crash, remove old ABI supportJay Vosburgh
David S. Miller <davem@davemloft.net> wrote: >I think removing support for older ifenslave binaries is >the least painful solution to this problem. This patch removes backwards compatibility for old ifenslave binaries (ifenslave prior to verison 1.0.0). I did not similarly modify ifenslave itself; with sysfs on the horizon, I don't see that as being worthwhile. Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03Merge branch 'upstream-fixes'Jeff Garzik
2005-10-03[netdrvr] fix smc91c92_cs multicast bugKomuro
The smc91c92_cs multicast does not work if the count of multicast address is 1. Signed-off-by: <komurojun-mbn@nifty.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[PATCH] ns83820: fix gfp flags typeRandy Dunlap
Fix implicit nocast warnings in ns83820 code: drivers/net/ns83820.c:603:46: warning: implicit cast to nocast type Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[PATCH] hostap: Unregister netdevs before freeing local dataJouni Malinen
Unregister all netdevs before freeing local data. I was unable to trigger any crashes without this change when running busy loops for driver operations when ejecting a Prism2 PC Card. Anyway, should there be a race condition with this, better make it less likely to happen by unregistering the netdevs first. Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[PATCH] hostap: Do not free local->hw_priv before unregistering netdevJouni Malinen
local->hw_priv was being freed and set to NULL just before calling prism2_free_local_data(). However, this may expose a race condition in which something ends up trying to use hw_priv during shutdown. I haven't noticed this happening, but better be safe than sorry, so let's postpone hw_priv freeing to happen only after prism2_free_local_data() has returned. Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[PATCH] hostap: Fix hostap_pci build with PRISM2_IO_DEBUGJouni Malinen
The debug version of I/O functions in hostap_pci had not survived the change to start using hw_priv pointer, so let's fix them to actually define the local hw_priv variable. Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[PATCH] hostap: Remove hw specific dev_open/close handlersJouni Malinen
Host AP driver used hardware model specific dev_open/close handlers that were called on dev_open/close if the hardware driver had registered the handler. These were only used for hostap_cs and only for tracking whether any of the netdevs were UP. This information is already available from local->num_dev_open, so there is not need for the special open/close handler. Let's get rid of these handlers. In addition to cleaning up the code, this fixes a module refcounting issue for hostap_cs where ejecting the card while any of the netdevs were open did not decrement refcount properly. Signed-off-by: Jouni Malinen <jkmaline@cc.hut.fi> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[PATCH] skge: set mac address oops with bondingStephen Hemminger
Skge driver was bringing link up/down when changing mac address. This doesn't work in the bonding environment, and is more effort than needed. Fixes-bug: http://bugzilla.kernel.org/show_bug.cgi?id=5271 Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-03[TG3]: Update driver version and release date.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03[IPV4]: Replace __in_dev_get with __in_dev_get_rcu/rtnlHerbert Xu
The following patch renames __in_dev_get() to __in_dev_get_rtnl() and introduces __in_dev_get_rcu() to cover the second case. 1) RCU with refcnt should use in_dev_get(). 2) RCU without refcnt should use __in_dev_get_rcu(). 3) All others must hold RTNL and use __in_dev_get_rtnl(). There is one exception in net/ipv4/route.c which is in fact a pre-existing race condition. I've marked it as such so that we remember to fix it. This patch is based on suggestions and prior work by Suzanne Wood and Paul McKenney. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03[TG3]: Refine AMD K8 write-reorder chipset test.Michael Chan
Test for VIA K8T800 north bridge instead of AMD K8 HyperTransport bridge based on new information from Andi Kleen. The AMD HyperTransport interface is not responsible for PCI transactions and so the re-ordering is more likely done by the VIA north bridge. This code is subject to change if we get more information from AMD or VIA. PCI Express devices are excluded from doing the read flush since all chipsets in the write_reorder list are PCI chipsets. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-03[CASSINI]: Convert to ethtool_opsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-10-02[ARM] Fix init printk for EBSA110 network driver, and link timerRussell King
Arrange for the initialisation printks to happen after we've registered the network interface, so we know what name the device is. Also, check the link every 500ms (and use msecs_to_jiffies.) Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-10-02[ARM] Fix EBSA110 network driver link detectionRussell King
EBSA110 link detection didn't read the register - it wrote it. Oops. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-03 16:44:36 +0000