aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-10-30ath9k_hw: remove bogus register write on ath9k_hw_9271_pa_cal()Luis R. Rodriguez
An extra register was being written to for PA calibration making the hardware unresponsive, remove it. Hardware reset should now complete fine on ar9271. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30ath9k_hw: correct AR_PHY_SPECTRAL_SCAN register offsetLuis R. Rodriguez
We had 0x9912 but AR_PHY_SPECTRAL_SCAN is 0x9910. By using the 0x9912 we were making the hardware unresponsive. This allows us to move forward with hardware reset on ar9271 on the ath9k_htc driver. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30ath9k_hw: add AR9271 single chip name mappingLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30ath9k_hw: distinguish single-chip solutions on initial probe printLuis R. Rodriguez
Devices with external radios have revisions which we can count on. On single chip solutions these EEPROM values for these radio revision also exist but are not meaningful as the radios are embedded onto the same chip. Each single-chip device evolves together as one device. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30ath9k_hw: move mac name and rf name helpers to hw codeLuis R. Rodriguez
These are shared between ath9k and the future ath9k_htc driver. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30wl1251: enable power saveKalle Valo
wl1251 supports power save and it can be enabled now. Signed-off-by: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-30b43: LP-PHY: Begin implementing calibration & software RFKILL supportGábor Stefanik
This implements the following calibration functions: -Set TX IQCC -Set TX Power by Index -PR41573 workaround (incomplete, needs PHY reset) -Calc RX IQ Comp -PHY Cordic -Run Samples -Start/Stop TX Tone -part of PAPD Cal TX Power -RX I/Q Calibration -The basic structure of the periodic calibration wrapper Software RFKILL (required by calibration) is also implemented in this round. Signed-off-by: Gábor Stefanik <netrolller.3d@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-29convert kaweth to use usb_reset_configuration()Oliver Neukum
For USB 3.0 it is necessary that all drivers use the standard API to reset a configuration. This removes a home-grown implementation. Signed-off-by: Oliver Neukum <oliver@neukum.org> Hi David, please take this for the next merge window. Regards Oliver Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29sky2: version 1.26Stephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29sky2: 88E8059 supportStephen Hemminger
Tentative support for newer Marvell hardware including the Yukon-2 Optima chip. Do not have hatdware to test this yet, code is based on vendor driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29sky2: workarounds for Yukon-2 supremeStephen Hemminger
Changes related to support of Yukon supreme chip. Don't have this chip version to test on, these are reverse engineered from the vendor (GPL) driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29sky2: fix receive pause thresholdsStephen Hemminger
Program the receive pause thresholds differently depending on chip version. This cloned from from the vendor (GPL) driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29sky2: add register definitions for new chipsStephen Hemminger
This adds infrastructure for the newer chip versions and workarounds. Extracted from the vendor (GPL) driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29sky2: add SK-9E21M device idStephen Hemminger
This is a new ID that just showed up in latest vendor driver. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29sfc: Enable heuristic selection between page and skb RX buffersBen Hutchings
Now that we can tell whether GRO is being applied, this heuristic is effective once more. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29sfc: Feed GRO result into RX allocation policy and interrupt moderationBen Hutchings
When GRO is successfully merging received packets, we should allocate raw page buffers rather than skbs that will be discarded by GRO. Otherwise, we should allocate skbs. GRO also benefits from higher interrupt moderation, so increase the score for mergeable RX packets. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
2009-10-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-10-29netdev: usb: dm9601.c can drive a device not supported yet, add support for itJanusz Krzysztofik
I found that the current version of drivers/net/usb/dm9601.c can be used to successfully drive a low-power, low-cost network adapter with USB ID 0a46:9000, based on a DM9000E chipset. As no device with this ID is yet present in the kernel, I have created a patch that adds support for the device to the dm9601 driver. Created and tested against linux-2.6.32-rc5. Signed-off-by: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl> Acked-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29qlge: Fix firmware mailbox command timeout.Ron Mercer
The mailbox command process would only process a maximum of 5 unrelated firmware events while waiting for it's command completion status. It should process an unlimited number of events while waiting for a maximum of 5 seconds. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29qlge: Fix EEH handling.Ron Mercer
Clean up driver resources without touch the hardware. Add pci save/restore state. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29be2net: Add the new PCI IDs to PCI_DEVICE_TABLE.Ajit Khaparde
This patch adds the PCI IDs for the next generation chip to the PCI_DEVICE_ID table. Signed-off-by: Ajit Khaparde <ajitk@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-10-29e1000e: flow control doesn't re-enableBruce Allan
When changing flow control (pause) parameters, the flow control thresholds (i.e. when to send XON/XOFF frames) may not be setup correctly on parts with copper media. Call the existing e1000_set_fc_watermarks() function to set these thresholds. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ixgbe: Add support for netdev_ops.ndo_fcoe_get_wwn to 82599Yi Zou
Implements the netdev_ops.ndo_fcoe_get_wwn in 82599 if it finds valid prefix for the World Wide Node Name (WWNN) or World Wide Port Name (WWPN), as well as valid SAN MAC address. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-29ixgbe: Add support for 82599 alternative WWNN/WWPN prefixYi Zou
The 82599 EEPROM supports alternative prefix for World Wide Node Name (WWNN) and World Wide Port Name (WWPN). The prefixes can be used together with the SAN MAC address to form the WWNN and WWPN, which can be used by upper layer drivers such as Fiber Channel over Ethernet (FCoE). Signed-off-by: Yi Zou <yi.zou@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28vmxnet3: remove duplicate #includeShreyas Bhatewara
Remove duplicate headerfile includes from vmxnet3_int.h Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: Huang Weiyi <weiyi.huang@gmail.com> Signed-off-by: Bhavesh Davda <bhavesh@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28bonding: fix a race condition in calls to slave MII ioctlsJiri Bohac
In mii monitor mode, bond_check_dev_link() calls the the ioctl handler of slave devices. It stores the ndo_do_ioctl function pointer to a static (!) ioctl variable and later uses it to call the handler with the IOCTL macro. If another thread executes bond_check_dev_link() at the same time (even with a different bond, which none of the locks prevent), a race condition occurs. If the two racing slaves have different drivers, this may result in one driver's ioctl handler being called with a pointer to a net_device controlled with a different driver, resulting in unpredictable breakage. Unless I am overlooking something, the "static" must be a copy'n'paste error (?). Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28be2net: Changes to update ethtool get_settings function to return ↵Sarveshwar Bandi
appropriate values. Update ethtool get_settings function to: - get current link speed settings from controller - get port transceiver type from controller - fill appropriate values for supported, phy_address Signed-off-by: Sarveshwar Bandi <sarveshwarb@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28e100: Fix to allow systems with FW based cards to resume from STDDavid Graham
Devices with loadable firmware must have their firmware reloaded after the system resumes from sleep, but the request_firmare() API is not available at this point in the resume flow because tasks are not yet running, and the system will hang if it is called. Work around this issue by only calling request_firmware() for a device's first firmware load, and cache a copy of the pointer to the firmware blob for that device, so that we may reload firmware images even during resume. Signed-off-by: David Graham <david.graham@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: update version to 4.0.65Dhananjay Phadke
Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: module firmware hintsDhananjay Phadke
Add MODULE_FIRMWARE hints for various firmware file types, required by different chip revisions. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: update module infoDhananjay Phadke
Update module info with QLogic signature. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: add PCI IDs for new chipDhananjay Phadke
Add PCI vendor and device IDs for QLE8240 and QLE8242 CNA devices. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: refactor indirect register accessDhananjay Phadke
Refactor code to calculate and set indirect access window for control registers in 2MB address space (NX3031 or newer). Use void __iomem * data type for absolute pci addresses. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28netxen: support for new firmware file formatAmit Kumar Salecha
Add support for extracting firmware from a unified file format which embeds firmware images for all chip revisions. Fallback to orginal file formats if new image is not found. Signed-off-by: Amit Kumar Salecha <amit@netxen.com> Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28virtio-net: fix data corruption with OOMMichael S. Tsirkin
virtio net used to unlink skbs from send queues on error, but ever since 48925e372f04f5e35fec6269127c62b2c71ab794 we do not do this. This causes guest data corruption and crashes with vhost since net core can requeue the skb or free it without it being taken off the list. This patch fixes this by queueing the skb after successful transmit. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28via-velocity: Remove private device listBen Hutchings
via-velocity maintains a list of its devices in order to determine whether a netdev notification applies to one of them. That can be determined simply by checking the netdev_ops pointer, so the list can be removed. Compile-tested only. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28tc35815: Enable NAPIAtsushi Nemoto
This driver has NAPI code but it has been disabled. Enable it now. The non-napi code will be removed lator. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28tc35815: Fix return value of tc35815_do_interrupt when NAPI enabledAtsushi Nemoto
Return received count correctly even if tx completed at the same time. Currently NAPI is disabled for this driver so this patch does not fix any real problem. Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28NET/KS8695: add support NAPI for RxFigo.zhang
Add support NAPI Rx API for KS8695NET driver. v2, change the Rx function to NAPI. in <KS8695X Integrated Multi-port Gateway Solution Register Description v1.0>: Interrupt Enable Register (offset 0xE204) Bit29 : WAN MAC Receive Interrupt Enable Bit16 : LAN MAC Receive Interrupt Enable Interrupt Status Register (Offset 0xF208) Bit29: WAN MAC Receive Status Bit16: LAN MAC Receive Status see arch/arm/mach-ks8695/devices.c: ks8695_wan_resources[] and ks8695_lan_resources[] have IORESOURCE_IRQ , it have define the RX irq, for wan, irq = 29; for lan ,irq = 16. so we can do this read the interrupt status: unsigned long mask_bit = 1 << ksp->rx_irq; status = readl(KS8695_IRQ_VA + KS8695_INTST); Signed-off-by: Figo.zhang <figo1802@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28sfc: Set ip_summed correctly for page buffers passed to GROBen Hutchings
Page buffers containing packets with an incorrect checksum or using a protocol not handled by hardware checksum offload were previously not passed to LRO. The conversion to GRO changed this, but did not set the ip_summed value accordingly. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28cnic: Fix L2CTX_STATUSB_NUM offset in context memory.Michael Chan
The BNX2_L2CTX_STATUSB_NUM definition needs to be changed to match the recent firmware update: commit 078b0735881c7969aaf21469f3577831cddd9f8c bnx2: Update firmware to 5.0.0.j3. Without the fix, bnx2 can crash intermittently in bnx2_rx_int() when iSCSI is enabled. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: Benjamin Li <benli@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28igb: Fix warnings in igb_set_ringparam()David S. Miller
drivers/net/igb/igb_ethtool.c: In function ‘igb_set_ringparam’: drivers/net/igb/igb_ethtool.c:744: warning: comparison of distinct pointer types lacks a cast drivers/net/igb/igb_ethtool.c:748: warning: comparison of distinct pointer types lacks a cast Casts were to u16 on the constant, but the type of new_{r,t}x_count is u32. Cast to u32 instead. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28igb: cleanup whitespace issues in igb_main.cAlexander Duyck
This patch goes through and cleans up whitespace issues in igb_main.c to help improve readability. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28igb: open up SCTP checksum offloads to all MACs 82576 and newerAlexander Duyck
Going forward the plan is to have the MACs support SCTP checksum offloads so change the check from == to >=. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28igb: limit minimum mtu to 68 to keep ip bound to interfaceAlexander Duyck
Limit the minimum mtu to 68 in order to prevent ip from being unbound from the interface. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28igb: add pci_dev in few spots to clean up use of dev_err/info/warnAlexander Duyck
This patch relpaces several references to adapter->pdev->dev with just pdev->dev. This allows for cleanup of several multiline dev_err/info calls. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28igb: replace unecessary &adapter->hw with just hw where applicableAlexander Duyck
This patch just cleans up some unecessary references to the adapter->hw member when it has already been placed in a local variable named hw. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-10-28igb: cleanup clean_rx_irq_adv and alloc_rx_buffers_advAlexander Duyck
This patch cleans up some whitespace issues in clean_rx_irq_adv. It also adds NUMA aware page allocation and dma error handling to alloc_rx_buffers_adv. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-14 04:23:46 +0000