aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-11-18iwlwifi: disable coex until implementation ready for 6x50Wey-Yi Guy
Temporary disable the coex function for wifi/wimax for 6x50 series until the full implementation ready. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18iwlwifi: validate enhanced tx power entryWey-Yi Guy
Validate enhanced tx power entry read from EEPROM before applying the tx power value. Different versions of EEPROM might contain different size of table; always a good idea to make sure the entry is valid before applying to the targeted channel. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6
2009-11-18drivers/net/wireless/rtl818x: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/wireless/p54: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/wireless/iwlwifi: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/adm8211.c: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/wan: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/via-velocity.c: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/via-rhine.c: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/typhoon.c: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/smsc9420.c: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/r6040.c: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/pppol2tp.c: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/irda: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/ipg.c: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/can: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18drivers/net/atl1c: remove exceptional & on function nameJulia Lawall
In this file, function names are otherwise used as pointers without &. A simplified version of the semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... } @@ identifier r.f; @@ - &f + f // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18qlge: Bonding fix for mode 6.Ron Mercer
Allow MAC address to be changed even if device is not up. Signed-off-by: Ron Mercer <ron.mercer@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18netns: net_identifiers should be read_mostlyEric Dumazet
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18can: fix setting mcp251x bit timing on openChristian Pellegrin
Signed-off-by: Christian Pellegrin <chripell@fsfe.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-18bnx2x: Don't set netdev->trans_startVladislav Zolotarov
Setting dev->trans_start caused spurious watchdog warnings. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17macvlan: Precise RX stats accountingEric Dumazet
With multi queue devices, its possible that several cpus call macvlan RX routines simultaneously for the same macvlan device. We update RX stats counter without any locking, so we can get slightly wrong counters. One possible fix is to use percpu counters, to get precise accounting and also get guarantee of no cache line ping pongs between cpus. Note: this adds 16 bytes (32 bytes on 64bit arches) of percpu data per macvlan device. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17vmxnet3: using csum_ipv6_magic requires including net/ip6_checksum.hStephen Rothwell
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17znet: fix build failure from i82593.h relocationJohn W. Linville
znet was including "wireless/i82593.h" (which is a bit wierd), and I missed that when I relocated i82593.h to drivers/staging/wavelan. Since I don't have ISA turned-on in my normal .config, I didn't see the build failures -- mea culpa! Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-17net: Getting rid of the x86 dependency to built vmxnet3Shreyas Bhatewara
This patch removes config dependency on x86 to build vmxnet3 driver. Thus the driver can be built on big endian architectures now. Although vmxnet3 is not supported on VMs other than x86 architecture, all this code goes in to ensure correctness. If the code is not dependent on x86, it should not assume little endian architecture in any of its operations. Signed-off-by: Shreyas Bhatewara <sbhatewara@vmware.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17bnx2x: Handle Rx and Tx together in NAPIVladislav Zolotarov
Put Tx and Rx DPC to be handled in the NAPI: - Saves status blocks. - Moves the Tx work from hardIRQ to NAPI. Signed-off-by: Vladislav Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net: PPP buffer too small for higher speed connectionsfangxiaozhi
1. This patch is based on the kernel of 2.6.32-rc7 2. In this patch, we enlarge the out buffer size to optimize the upload speed for the ppp connection. Then it can support the upload of HSUPA data cards. Signed-off-by: fangxiaozhi <huananhu@huawei.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: improve buildWolfram Sang
- move Kconfig entries to the subdirectory - do remaining renames of mpc52xx to mpc5xxx Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: add error path to mscan_open()Wolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: replace hardcoded values with definesWolfram Sang
Not all hardcoded values have been replaced as this made the code quite unreadable. IMHO this compromise serves the purpose of readability. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mpc52xx_can: improve properties and their descriptionWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: devicetree-discuss@ozlabs.org Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mpc52xx_can: refactor clock-get routineWolfram Sang
Merge two functions into one. The result is smaller as they can now share some variables. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: drop assignment in while-constructWolfram Sang
As suggested by Wolfgang Grandegger. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: fix function annotationsWolfram Sang
- use extern where apropriate - don't export symbols Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: use {clr|set}bits8 macrosWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: drop support for CAN_MODE_{SLEEP|STOP}Wolfram Sang
The upper layer does not support it yet. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: trivial fixesWolfram Sang
- remove whitespaces - use ! and ?: when apropriate - make braces consistent Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17net/can/mscan: move defines into .h fileWolfram Sang
Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-17Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/can/Kconfig
2009-11-16KS8695: fix ks8695_rx() unreasonable action.zeal
ks8695_rx() will call refill_buffers() for every incoming packet. Its not necessary. We just need do it after finishing receiving thing. And the 'RX dma engine' is in the same situation. This blocks our user space application. The following patch may fix it. Signed-off-by: zeal <zealcook@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16KS8695: fix ks8695_rx_irq() bug.zeal
ks8695 rx irq is edge-level. Before arriving at irq handler, the corresponding status bit has been clear(irq's ack). So we should not check it after that. Signed-off-by: zeal <zealcook@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16ppp: fix BUG on non-linear SKB (multilink receive)Ben McKeegan
PPP does not correctly call pskb_may_pull() on all necessary receive paths before reading the PPP protocol, thus causing PPP to report seemingly random 'unsupported protocols' and eventually trigger BUG_ON(skb->len < skb->data_len) in skb_pull_rcsum() when receiving multilink protocol in non-linear skbs. ppp_receive_nonmp_frame() does not call pskb_may_pull() before reading the protocol number. For the non-mp receive path this is not a problem, as this check is done in ppp_receive_frame(). For the mp receive path, ppp_mp_reconstruct() usually copies the data into a new linear skb. However, in the case where the frame is made up of a single mp fragment, the mp header is pulled and the existing skb used. This skb was then passed to ppp_receive_nonmp_frame() without checking if the encapsulated protocol header could safely be read. Signed-off-by: Ben McKeegan <ben@netservers.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16ixgbe: Fixing EEH handler to handle more than one errorBreno Leitao
After commmit 4b77b0a2ba27d64f58f16d8d4d48d8319dda36ff EEH breaks after the second error, since it calls pci_restore_state() but it returns 0, since pci->state_saved is false. So, this patch just call pci_save_state() after pci_restore_state(). Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-11-16Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-11-16ath5k: allow setting txpower to 0Bob Copeland
As a holdover from earlier code when we used to set the power limit to '0' after a reset to configure the default transmit power, ath5k interprets txpower=0 as 12.5 dBm. Fix that by just passing 0 through. This fixes http://bugzilla.kernel.org/show_bug.cgi?id=14567 Cc: stable@kernel.org Reported-by: Daniel Folkers <daniel.folkers@task24.nl> Tested-by: Daniel Folkers <daniel.folkers@task24.nl> Signed-off-by: Bob Copeland <me@bobcopeland.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-16rndis_wlan: handle NL80211_AUTHTYPE_AUTOMATICJussi Kivilinna
rndis_wlan didn't know about NL80211_AUTHTYPE_AUTOMATIC and simple setup with 'iwconfig wlan essid no-encrypt' would fail (ENOSUPP). v2: use NDIS_80211_AUTH_AUTO_SWITCH instead of _OPEN. This will make device try shared key auth first, then open. Signed-off-by: Jussi Kivilinna <jussi.kivilinna@mbnet.fi> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-16rt2800: do not enable tbtt unless we are in a beacon modeJosef Bacik
Please be gentle, I'm a fs developer and this is my first foray into drivers, as I'm tired of building ralinks driver everytime I update my kernel. Whenever I load the rt2800pci driver my box bogs down, and a few printk's later I discovered its because I was getting 10's of thousands of TBTT interrupts a second. I discovered this was because we were setting the beacon timer to 0, which is apparently what TBTT keys off of. It seems to me that we should only be enabling TBTT when we are in a beacon transmitting mode, which from what I can tell is in AD-HOC and other such modes where the mac80211 layer would have given us a proper beacon_int to set the beacon timer to instead of 0. So this is my fix, only enable TBTT if our sync mode is for beacon. This makes it so my box doesn't die everytime I load the rt2800pci driver. Let me know if this is acceptable, I just learned all these terms about 15 minutes ago via wikipedia, so I really am not familiar with how this stuff is supposed to work. Thanks, Signed-off-by: Josef Bacik <josef@redhat.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-16ath9k: fix massive rx packet loss issueFelix Fietkau
This patch fixes a regression introduced in "ath9k: avoid the copy skb->cb on every RX'd skb" With that change, the rx status in skb->cb was left uninitialized Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-01 14:26:38 +0000