aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-09-24Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
Conflicts: drivers/staging/Kconfig drivers/staging/Makefile drivers/staging/cpc-usb/TODO drivers/staging/cpc-usb/cpc-usb_drv.c drivers/staging/cpc-usb/cpc.h drivers/staging/cpc-usb/cpc_int.h drivers/staging/cpc-usb/cpcusb.h
2009-09-24sysctl: remove "struct file *" argument of ->proc_handlerAlexey Dobriyan
It's unused. It isn't needed -- read or write flag is already passed and sysctl shouldn't care about the rest. It _was_ used in two places at arch/frv for some reason. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Cc: David Howells <dhowells@redhat.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: James Morris <jmorris@namei.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-24cpumask: use zalloc_cpumask_var() where possibleLi Zefan
Remove open-coded zalloc_cpumask_var() and zalloc_cpumask_var_node(). Signed-off-by: Li Zefan <lizf@cn.fujitsu.com> Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
2009-09-23Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-rx.c
2009-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (142 commits) USB: Fix sysfs paths in documentation USB: skeleton: fix coding style issues. USB: O_NONBLOCK in read path of skeleton USB: make usb-skeleton honor O_NONBLOCK in write path USB: skel_read really sucks royally USB: Add hub descriptor update hook for xHCI USB: xhci: Support USB hubs. USB: xhci: Set multi-TT field for LS/FS devices under hubs. USB: xhci: Set route string for all devices. USB: xhci: Fix command wait list handling. USB: xhci: Change how xHCI commands are handled. USB: xhci: Refactor input device context setup. USB: xhci: Endpoint representation refactoring. USB: gadget: ether needs to select CRC32 USB: fix USBTMC get_capabilities success handling USB: fix missing error check in probing USB: usbfs: add USBDEVFS_URB_BULK_CONTINUATION flag USB: support for autosuspend in sierra while online USB: ehci-dbgp,ehci: Allow dbpg to work with suspend/resume USB: ehci-dbgp,documentation: Documentation updates for ehci-dbgp ...
2009-09-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linusLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-for-linus: lguest: don't force VIRTIO_F_NOTIFY_ON_EMPTY lguest: cleanup for map_switcher() lguest: use PGDIR_SHIFT for PAE code to allow different PAGE_OFFSET lguest: use set_pte/set_pmd uniformly for real page table entries lguest: move panic notifier registration to its expected place. virtio_blk: add support for cache flush virtio: add virtio IDs file virtio: get rid of redundant VIRTIO_ID_9P definition virtio: make add_buf return capacity remaining virtio_pci: minor MSI-X cleanups
2009-09-23ath9k: Initialize txgain and rxgain for newer AR9287 chipsets.Vivek Natarajan
Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23iwlagn: fix panic in iwl{5000,4965}_rx_reply_txStanislaw Gruszka
In some cases firmware can give us bad value of index in transmit buffers array. This patch add sanity check for such values and return from processing function instantly when it happens. https://bugzilla.redhat.com/show_bug.cgi?id=521931 Patch was tested by reporter on iwl5000. I think check can be also helpful for 4965. Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix RFKILL bugsSujith
This patch fixes 2 issues in RFKILL: * Calling wiphy_rfkill_stop_polling() in ath9k_stop would mean that the driver cannot report HW status when the radio is re-enabled. Move this to ath_detach(). * Calling ath_radio_{enable/disable} without checking the current state results in ath_radio_enable() being called repeatedly for every invocation of rfkill_poll(). This is not needed in any case since wiphy_rfkill_set_hw_state() would call ->stop() if the radio has been disabled. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23drivers/net/wireless: Use usb_endpoint_dir_outJulia Lawall
Use the usb_endpoint_dir_out API function. Note that the use of USB_TYPE_MASK in the original code is incorrect; it results in a test that is always false. The semantic patch that makes this change is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ struct usb_endpoint_descriptor *endpoint; expression E; @@ - (endpoint->bEndpointAddress & E) == USB_DIR_OUT + usb_endpoint_dir_out(endpoint) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23wl12xx: fix kconfig/link errorsRandy Dunlap
"boolean" converts a module dependency (MAC80211=m) to YES, then the WL12XX driver can be built-in instead of only modular, which leads to linker errors: wl1271_main.c:(.text+0x11177d): undefined reference to `ieee80211_frequency_to_channel' wl1271_main.c:(.text+0x111adc): undefined reference to `ieee80211_stop_queues' wl1271_main.c:(.text+0x112005): undefined reference to `ieee80211_scan_completed' (.text+0x1139c8): undefined reference to `ieee80211_scan_completed' (.text+0x113bb0): undefined reference to `ieee80211_tx_status' (.text+0x113e53): undefined reference to `ieee80211_stop_queues' (.text+0x113e8d): undefined reference to `ieee80211_wake_queues' (.text+0x113f3b): undefined reference to `ieee80211_tx_status' (.text+0x113f60): undefined reference to `ieee80211_tx_status' (.text+0x1140f0): undefined reference to `ieee80211_channel_to_frequency' (.text+0x114153): undefined reference to `ieee80211_rx' wl1271_main.c:(.devinit.text+0xca08): undefined reference to `ieee80211_alloc_hw' wl1271_main.c:(.devinit.text+0xccf5): undefined reference to `ieee80211_register_hw' wl1271_main.c:(.devinit.text+0xcd6b): undefined reference to `ieee80211_free_hw' wl1271_main.c:(.devexit.text+0x1353): undefined reference to `ieee80211_unregister_hw' wl1271_main.c:(.devexit.text+0x13c9): undefined reference to `ieee80211_free_hw' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23rt2x00: fix the definition of rt2x00crypto_rx_insert_ivAndrew Price
Remove the redundant l2pad parameter from the definition of rt2x00crypto_rx_insert_iv which is used when only CONFIG_RT2500PCI but none of the other rt2x00 family drivers is configured. Signed-off-by: Andrew Price <andy@andrewprice.me.uk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23iwlwifi: reduce noise when skb allocation failsReinette Chatre
Replenishment of receive buffers is done in the tasklet handling received frames as well as in a workqueue. When we are in the tasklet we cannot sleep and thus attempt atomic skb allocations. It is generally not a big problem if this fails since iwl_rx_allocate is always followed by a call to iwl_rx_queue_restock which will queue the work to replenish the buffers at a time when sleeping is allowed. We thus add the __GFP_NOWARN to the skb allocation in iwl_rx_allocate to reduce the noise if such an allocation fails while we still have enough buffers. We do maintain the warning and the error message when we are low on buffers to communicate to the user that there is a potential problem with memory availability on system This addresses issue reported upstream in thread "iwlagn: order 2 page allocation failures" in http://thread.gmane.org/gmane.linux.kernel.wireless.general/39187 Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Acked-by: Mel Gorman <mel@csn.ul.ie> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23iwlwifi: do not send sync command while holding spinlockReinette Chatre
commit 10c994ca70e8e94bbc85a5bf13de5911ee8de4d2 "iwlwifi: fix remove key error" fixed an error reported by mac80211 during interface down. The fix involved changing an async command to synchronous. Unfortunately this was inside a spinlock section in which we cannot sleep. Modify the sending of the command back to async. This causes the mac80211 error "mac80211-phy0: failed to remove key (0, ff:ff:ff:ff:ff:ff) from hardware (-16)." to return. This error is not serious since this occurs during interface down and the keys will be cleared anyway when ucode is unloaded. Having this error message is thus less serious than a potential deadlock introduced when sleeping while holding a spinlock. We will have to find another fix for that error. This is a revert of the abovementioned commit. Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ar9170usb: add usbid for TP-Link TL-WN821N v2Christian Lamparter
This patch adds the usbid for TP-Link TL-WN821N v2. Cc: stable@kernel.org Reported-by: Fabian Lenz <lenz_fabian@yahoo.de> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Disable autosleep feature by default.Vivek Natarajan
Autosleep needs to be disabled for AR9287 chipsets also. Since autosleep is not used for any of the currently supported chipsets, disable it by default and can be enabled if needed for any of the future chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix regression in PA calibrationSujith
The commit "ath9k: Fix bugs in programming registers during PA CAL" removed a REG_READ of 0x7834. This resulted in incorrect computation of the subsequent value to be written in RF2G6. This patch fixes the regression by re-adding the REG_READ. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix bug in chain handlingSenthil Balasubramanian
* This patch fixes a bug in calculating the scaled power for three chain chipsets. * Also, a delay is needed after setting DAC low-power mode in TOP1 RF register (Top Level Register Bits). Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix AHB reset for AR9280Vivek Natarajan
The commit "ath9k: Do an AHB reset before doing RTC reset" fixed RTC reset issue for AR9280 2.0 chipsets and above. The fix is valid for all AR9280 chipsets. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Adjust the chainmasks properlySenthil Balasubramanian
This is needed to account for the number of chains in use, not just the number of chains present. Signed-off-by: Senthil Balasubramanian <senthilkumar@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Do a full reset for AR9280Vasanthakumar Thiagarajan
AR9280 requires a full reset during channel change and HW reset. Currently, a fast channel change is done. This patch fixes this bug. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Don't read NF when chip has gone through full sleep modeVasanthakumar Thiagarajan
NF value may be incorrect when we read it just after the chip has gone through a full sleep mode. Reading incorrect NF values affects RX throughput. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix rx data corruptionVasanthakumar Thiagarajan
Setting bit 20 and 25 of 0x8344 can cause occasional rx data corruption, clear them to fix this issue. Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix chip wakeup issueSujith
Waking up the chip after powering it down fails sometimes. In this case the CPU is locked for 200ms. Reduce this interval to 10ms to avoid excessive busy looping. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Restore TSF after RESETSujith
For chips requiring RTC reset, TSF has to be restored after power on reset. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Revamp PCIE workaroundsVivek Natarajan
* Disable L1 state ONLY when device is in D3 mode. * Clear bit 22 of register 0x4004. * Handle power on/off properly Not setting the workarounds properly resulted in the disappearance of the card in certain cases. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Set default noise floor value for AR9287Vivek Natarajan
The default noise floor was never initialized for AR9287.This patch helps in reporting the correct RSSI for this version of chipset. Signed-off-by: Vivek Natarajan <vnatarajan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Implement RFKILL status for LP PHYLarry Finger
The LP (and probably N) PHY has the same radio disabled bit as the higher-revision A and G PHYs. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Remove BROKEN attribute from SDIOMichael Buesch
SDIO works (more or less), so remove the BROKEN dependency and let people test it. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: fix build error if !CONFIG_B43_LEDSAlbert Herranz
Fix the following build error when CONFIG_B43_LEDS is not selected: drivers/net/wireless/b43/main.c: In function 'b43_remove': drivers/net/wireless/b43/main.c:4990: error: 'struct b43_leds' has no member named 'stop' drivers/net/wireless/b43/main.c:4991: error: 'struct b43_leds' has no member named 'work' make[4]: *** [drivers/net/wireless/b43/main.o] Error 1 Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Don't abuse wl->current_dev in the led workMichael Buesch
Don't abuse wl->current_dev in the LED work for checking whether we're going down. Add an explicit variable. This fixes a crash on rmmod dereferencing the wl->current_dev NULL pointer in various other places of the driver. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Add LP PHY Analog Switch SupportThomas Ilnseher
The current verison of b43 uses "b43_phyop_switch_analog_generic" for A, G and LP phys. According to the spec, this is the wrong behaviour for the LP PHY (see: http://bcm-v4.sipsolutions.net/802.11/PHY/Anacore ) While no problems on the x86 plattform where seen, this leads to a crash on the BCM5354 SoC (MIPS 32 LE plattform). This patch implements the analog switch for LP PHYs according to the specs. It fixes the crash signed-off-by: Thomas Ilnseher <illth@gmx.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Disable PMQ mechanismMichael Buesch
This reduces IRQ pressure by about one third on a saturated link by disabling the PMQ mechanism. We currently don't use that mechanism. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Add optional verbose runtime statisticsMichael Buesch
This adds support for verbose runtime statistics. It defaults to off and must be enabled in debugfs, if desired. The first measurement may be incorrect, because statistics are not cleared after they got enabled through debugfs. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Fix IRQ sync for SDIOMichael Buesch
synchronize_irq is meaningless for SDIO. sdio_release_irq will sync the IRQ thread for us. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Fix SDIO interrupt handler deadlockMichael Buesch
We need to release the SDIO host before locking the driver mutex. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Do not use _irqsafe callbacksMichael Buesch
We don't need to call the irqsafe callbacks. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Add Soft-MAC SDIO device supportAlbert Herranz
This adds support for Soft-MAC SDIO devices to b43. The driver still lacks some fixes for SDIO devices, so it's currently marked as BROKEN. Signed-off-by: Albert Herranz <albert_herranz@yahoo.es> Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Rewrite suspend/resume codeMichael Buesch
This removes most of the b43 suspend/resume code (it's handled by mac80211) and moves the registration of devices to the attachment phase. This is required, because we must not register/unregister devices on suspend/resume. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23p54usb: add Zcomax XG-705A usbidChristian Lamparter
This patch adds a new usbid for Zcomax XG-705A to the device table. Cc: stable@kernel.org Reported-by: Jari Jaakola <jari.jaakola@gmail.com> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23iwlwifi: disable powersave for 4965Johannes Berg
There's a bug in 4965 powersave that appears to be related to the way it keeps track of its data during sleep, but we haven't found it yet. Due to that, using powersave may spontaneously cause the device to SYSASSERT when transitioning from sleep to wake. Therefore, disable powersave for 4965, until (if ever, unfortunately) we can identify and fix the problem. Cf. http://bugzilla.intellinuxwireless.org/show_bug.cgi?id=1982 which was closed, but now has re-appeared with IDLE mode, which probably means we never really fixed it. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23iwlwifi: find the correct first antennaWey-Yi Guy
We can not assume antenna "A" is the first valid anttena for all the NIC. Need to make sure choice the correct antenna based on h/w configuration for transmit to avoid sending frame on invalid antenna Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23iwlwifi: fix potential rx buffer lossReinette Chatre
RX handling maintains a few lists that keep track of the RX buffers. Buffers move from one list to the other as they are used, replenished, and again made available for usage. In one such instance, when a buffer is used it enters the "rx_used" list. When buffers are replenished an skb is attached to the buffer and it is moved to the "rx_free" list. The problem here is that the buffer is first removed from the "rx_used" list _before_ the skb is allocated. Thus, if the skb allocation fails this buffer remains removed from the "rx_used" list and is thus lost for future usage. Fix this by first allocating the skb before trying to attach it to a list. We add an additional check to not do this unnecessarily. Reported-by: Rick Farrington <rickdic@hotmail.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23iwlwifi: fix HT operation in 2.4 GHz bandDaniel C Halperin
When we cleaned up the driver to properly tell mac80211 about HT rates ("iwlwifi: use iwl_hwrate_get_mac80211_idx where appropriate"), we broke internal rate indexing in 2.4 GHz band. Signed-off-by: Daniel C Halperin <daniel.c.halperin@intel.com> Tested-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Fix resume failureMichael Buesch
This fixes a resume failure where a signal is pending on resume so the firmware upload fails. This removes the interruptible sleep, because we don't really need it. In the worst case (with broken firmware) the sleep loop will take 1 second. In the common case (working firmware), it will only take a few milliseconds. So we don't really need to be interruptible. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23wireless: default CONFIG_WLAN to yLuis R. Rodriguez
When this was added no defaults were set and it seems this implies n. Default this to y. Reported-by: Jouni Malinen <jouni.malinen@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23ath9k: Fix bug in ANI channel handlingSujith
When processing MIB interrupts, OFDM and CCK error handling routines for low RSSI values have to be invoked only when the channel mode is 11G/11B. Since HT channels will also fall under the bands 2Ghz/5Ghz, check appropriately. Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23b43: Force-wake queues on initMichael Buesch
Force wake the mac80211 queues on init. Under rare circumstances they may be stopped, if a DMA error or something else causes a device reset while a queue was stopped. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23hostap: Revert a toxic part of the conversion to net_device_opsMartin Decky
As the hostap driver was converted to use net_device_ops, a mistake was made in hostap_main.c (commit 5ae4efbcd2611562a8b93596be034e63495706a5). Originally, the tx_queue_len was set to 0 for every other interface than HOSTAP_INTERFACE_MASTER, but the new fragment of code sets tx_queue_len to 0 only for HOSTAP_INTERFACE_MASTER. The opposite of the previous behavior makes the driver to drop all packets in AP mode. Change the way 0 is assigned to tx_queue_len according to the original logic. Signed-off-by: Martin Decky <martin@decky.cz> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-09-23spi: prefix modalias with "spi:"Anton Vorontsov
This makes it consistent with other buses (platform, i2c, vio, ...). I'm not sure why we use the prefixes, but there must be a reason. This was easy enough to do it, and I did it. Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Grant Likely <grant.likely@secretlab.ca> Cc: Jean Delvare <khali@linux-fr.org> Cc: Ben Dooks <ben-linux@fluff.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Samuel Ortiz <sameo@openedhand.com> Cc: "John W. Linville" <linville@tuxdriver.com> Acked-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-25 17:49:43 +0000