aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-10-07iwlwifi: separate nic_config for different NICWey-Yi Guy
Different NIC has different requirements for configuration. Currently all 5000 series hardware and later share the same configuration function even though they do not need the same configurations. Fix this by separating the needed configuration actions for each hardware model. .5000 series: L1-ASPM H/W bug work-around configure radio write CSR_HW_IF_CONFIG_REG for uCode use work-around for NIC get stuck after early PCIe power off .1000 series: write CSR_HW_IF_CONFIG_REG for uCode use setting digital SVR for 1000 card to 1.32V .6000 series: configure radio write CSR_HW_IF_CONFIG_REG for uCode use write CSR_GP_DRIVER_REG to indicate radio sku Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi: remove un-supported eeprom parametersWey-Yi Guy
Remove few of the parameters not used and no longer valid in EEPROM. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07iwlwifi: modify LED blink index tableWey-Yi Guy
Modify LED blink index table to include 1Mbps. Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com> Signed-off-by: Reinette Chatre <reinette.chatre@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: make ath9k_common_ops constLuis R. Rodriguez
As noted by Jiri. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07atheros: move bus ops to ath_commonLuis R. Rodriguez
This is the last part to make ath9k hw code core driver agnostic. I believe ath9k_htc can now use use the hw code unmodified. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move ATH9K_RSSI_BAD to hw.hLuis R. Rodriguez
mac.c is now core driver independent. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: clarify what hw code is and remove ath9k.h from a few filesLuis R. Rodriguez
hw code will be shared between ath9k and ath9k_htc. Just a few more files are left to clean up, mark them as well. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: remove driver ASSERT, just use BUG_ON()Luis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move ATH_AMPDU_LIMIT_MAX to hw.hLuis R. Rodriguez
This is used by hw code. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: remove ath9k_ht_macmodeLuis R. Rodriguez
This is used just to determine how to program the MAC, either for 20 MHz operation of 40 MHz so just use conf_is_ht40() Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: remove ath9k 25 MHz HT40 spacing stuffLuis R. Rodriguez
This was for supporting 25 MHz spacing for HT40, this is not used as we use 20 MHz spacing instead for HT40 as per 802.11n. The hardware is capable of it though so we leave the phymode definition and EEPROM parsing for it. If some experimenter wants to work on this stuff stuff you can add an extension enabling bool on ath_common and perhaps some debugfs knob to enable it. Keep in mind you'll also need to update the phymode with the AR_PHY_FC_DYN2040_EXT_CH which has been left on the driver. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07atheros: move tx/rx chainmask to ath_commonLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07atheros: add common debug printingLuis R. Rodriguez
ath9k uses this for now, ath9k_htc is expected to re-use this as well. We lave ath5k as is, but it certainly can also be converted later. The ath9k module parameter and debugfs entry is kept. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: separate core driver and hw timer codeLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07atheros: add ieee80211_hw to ath_commonLuis R. Rodriguez
Make use of it on hw code in ath9k to avoid using the ath9k ath_softc. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07atheros: define shared bssidmask settingLuis R. Rodriguez
Also make ath5k and ath9k use it, and share register definitions. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: define ath_common opsLuis R. Rodriguez
Only common ath read/write ops go through the common ops. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: allocate ath5k_hw prior to initializing hwLuis R. Rodriguez
We can propagate better errors upon failed hw initialization, and set up the ath_common structure for attach purposes. This will become important once we start using the ath_common for read/write ops. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07atheros/ath9k: add common read/write ops and port ath9k to use itLuis R. Rodriguez
In an effort to make hw code driver core agnostic read and write operations are defined on the ath_common structure. This patch adds that and makes ath9k use it. This allows drivers like ath9k_htc to define its own read/write ops and still rely on the same hw code. This also paves the way for sharing code between ath9k/ath5k/ath9k_htc. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: Define bus agnostic bluetooth coex prep helperLuis R. Rodriguez
We disable ASPM when enabling bluetooth coexistance. Disabling ASPM is a bus specific operation. In the future other buses may support bluetooth coexistance, an example is USB. To this end move the current routine which disables ASPM into pci.c, and declare it the PCI bt_coex_prep() helper. Additionally, since ASPM is a PCI-Express primitive ensure we don't ever try to muck with ASPM registers on non PCI-express devices. This also cleans up hw.c to not include bus specific headers or utilities. Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Cc: Stephen Chen <stephen.chen@atheros.com> Cc: Zhifeng Cai <zhifeng.cai@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: move ath_common to ath5k_hwLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move ath_common to ath_hwLuis R. Rodriguez
This ensures that we can access common on hw related code independent of the driver core. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: initialize eeprom struct early on attachLuis R. Rodriguez
This fixes this sparse warning: CHECK drivers/net/wireless/ath/ath5k/attach.c drivers/net/wireless/ath/ath5k/attach.c:288:42: warning: symbol 'ee' shadows an earlier one drivers/net/wireless/ath/ath5k/attach.c:109:34: originally declared here Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath5k: use common curbssid, bssidmask and macaddrLuis R. Rodriguez
The ah_sta_id was really being used as the macaddr. ath5k still does not use the association ID now passed up by mac80211, that can be fixed later. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ar9170: make use of common macaddr and curbssidLuis R. Rodriguez
These are provided by ath_common. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07atheros/ath9k: move macaddr, curaid, curbssid and bssidmask to commonLuis R. Rodriguez
These are common amongst ath9k and ath5k, so put them into the common structure and make ath9k to use it. ar9170 can use macaddr, and curbssid. We'll change ath5k and ar9170 separately. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: use ath9k_hw_write_associd() on resetLuis R. Rodriguez
Use the already provided helper instead of rewriting the code required in place. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: Use ath9k_hw_setbssidmask() on resetLuis R. Rodriguez
The same code was being implemented on reset for setting the bssidmask, instead just use the already provided helper. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: make ath9k_hw_setbssidmask() and ath9k_hw_write_associd() use ath_hwLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07atheros: use get_unaligned_le*() for bssid mask settingLuis R. Rodriguez
Historically some macro helpers have been users for this, AR5K_LOW_ID() and AR5K_HIGH_ID(), use upstream unaligned helpers instead. This applid to ath5k and ar9170. ath9k already uses this. Worth noting is ath5k uses an ah_sta_id but that is already the MAC address combined with the associaiton ID, ah_sta_id is really ETH_ALEN in size. Cc: Bob Copeland <me@bobcopeland.com> Cc: Nick Kossifidis <mick@madwifi-project.org> Cc: Christian Lamparter <chunkeey@web.de> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath: move ath_bcast_mac to common headerLuis R. Rodriguez
This is used by both ath5k and ath9k to set the first bssid mask. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: rename driver core and hw power save helpersLuis R. Rodriguez
ath9k_hw_setpower_nolock --> ath9k_hw_setpower() ath9k_hw_setpower() --> ath9k_setpower() Also change the param for ath9k_setpower() to pass the ath_softc. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move ath9k_hw_setpower() to main.cLuis R. Rodriguez
And we make it static. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: avoid usage of ath9k_hw_setpower() on hw.cLuis R. Rodriguez
ath9k_hw_setpower() is a core driver helper with locking protection. Locking protection should be left to the driver core, not the hw code. Hardware code no longer contends for locking when it needs to wake up the chip or put it to sleep. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move ath9k_ps_wakeup() and ath9k_ps_restore() to main.cLuis R. Rodriguez
These are driver core helpers. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move ps helpers onto core driver when reseting tsfLuis R. Rodriguez
When the TSF is reset power save state is disabled and then restored. The helpers to disable power save and restore it use a lock provided by the driver core. Move the callers of the helpers outside of the hw code. We reset the TSF when mac80211 tells us and on the beacon.c helper ath9k_hw_beaconinit() when it is made explicitly required. Add a helper on beacon.c which will deal with ps awake/restore if we need to reset the TSF upon ath9k_hw_beaconinit(). Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: rename ath_btcoex_supported() to ath9k_hw_btcoex_supported()Luis R. Rodriguez
Also just pass the ath_hw as the parameter. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move ath_btcoex_config and ath_bt_mode to btcoex.cLuis R. Rodriguez
These are only used by btcoex.c on one routine, so stuff them into that file. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: now move ath9k_hw_btcoex_set_weight() to btcoex.cLuis R. Rodriguez
After some necessary cleanups we now move ath9k_hw_btcoex_set_weight() to where it belongs. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: simplify ath_btcoex_bt_stomp()Luis R. Rodriguez
The second argument is always the hardware bt coex struct, so remove it, and rename the function on the path with a ath9k_ prefix. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: rename ath_btcoex_info to ath_btcoex_hwLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: rename btcoex_scheme to just schemeLuis R. Rodriguez
btcoex_scheme is already part of a btcoex struct, its implied this is btcoex related. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: remove unused bt_duty_cycleLuis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move bt_stomp_type to driver coreLuis R. Rodriguez
The bt_stomp_type defines the bt coex weight, it has a one-to-one mapping. In the future we may want to just use the weight directly. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: replaces SC_OP_BTCOEX_ENABLED with a boolLuis R. Rodriguez
Whether or not bluetooth coex has been enabled is a hardware state and only the hardware helpers will be able to set this. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: split ath9k_hw_btcoex_enable() into two helpersLuis R. Rodriguez
One for 2-wire and another for 3-wire. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move driver core helpers to main.cLuis R. Rodriguez
Keep on btcoex.c only hardware access helpers, move the driver core specific code to main.c. To accomplish this we had to split ath_init_btcoex_info() into two parts, the driver core part -- ath_init_btcoex_timer() and the hw specific part -- ath9k_hw_init_btcoex_hw_info(). This highlights how ath_gen_timer is part of the driver core, not hw related, so stuff that into ath_btcoex struct. The ath9k_hw_btcoex_init() code is now put inline on ath_init_softc() through a switch to it easier to follow, since we did that we can now call ath_tx_get_qnum() from the main.c instead of btcoex.c Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: split bluetooth hardware coex init into two helpersLuis R. Rodriguez
Use a helper for 2-wire and another for 3-wire. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move hw specific btcoex info to ath_hwLuis R. Rodriguez
Since we now access it via the ath_hw declare the ath_hw pointer at the header of some routines and se it. ath9k.h no longer needs to access btcoex.h and to adjust for this move ath_btcoex_set_weight() into btcoex.h and instead give main.c a helper for setting initial values upon drv_start() Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-10-07ath9k: move btcoex core driver info to its own structLuis R. Rodriguez
There is some bluetooth coexistance data which is driver specific, stuff that into its own structure. Cc: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-10 13:14:42 +0000