aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2006-02-27[TG3]: Fix Sun tg3 variant detection.David S. Miller
Some Sun parts don't have PCI_VENDOR_ID_SUN in the subsystem vendor ID. So add another fallback test, which is the name of the OBP firmware device tree node. If it's a Sun part we'll get "network", else it will be named "ethernet". Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-25Fix Wake on LAN support in sis900Daniele Venzano
Fix two bugs in the WoL implementation of sis900. The first causes hangs on some system on driver load, the second causes troubles when disabling WoL support. Both fixes are one liner and really simple. Signed-off-by: Lennert Buytenhek <buytenh@wantstofly.org> Signed-off-by: Daniele Venzano <venza@brownhat.org>
2006-02-23Merge branch 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2006-02-24[PATCH] drivers/net/tlan.c: #ifdef CONFIG_PCI the PCI specific codeAdrian Bunk
drivers/net/tlan.c compiles with CONFIG_PCI=n only with a warning and due to the dead code elimination of gcc. Additionally, this fixes the only compile error I found with CONFIG_PCI=n and the gcc -Werror-implicit-function-declaration flag on i386. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-23[NET]: Increase default IFB device count.Richard Lucassen
The most usable number of ifb devices is 2. Change the default to 2. Signed-off-by: Richard Lucassen <spamtrap@lucassen.org> Signed-off-by: Jamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-23skge: protect interrupt maskStephen Hemminger
There is a race between updating the irq mask and setting it which can be triggered on SMP with a bad cable. Similar patch from Ingo Molnar and Thomas Gleixner Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-02-23skge: genesis phy initialzationStephen Hemminger
The SysKonnect Genesis based board would fail on initialization with phy_read errors caused by not waiting for last phy write. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-02-23skge: NAPI/irq race fixStephen Hemminger
Fix a race in the receive NAPI, irq handling. The interrupt clear and the start need to be separated. Otherwise there is a window between the last frame received and the NAPI done level handling. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-02-23r8169: enable wake on lanFrancois Romieu
Similar to 8139cp code but more inspired/lucky. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-02-23r8169: fix broken ring index handling in suspend/resumeFrancois Romieu
rtl8169_hw_start() requires that the descriptor ring indexes be set to zero. Let a deferred invocation of rtl8169_reset_task() handle it. Enabling a few power management bits will not hurt either. suspend/resume is issued with irq on: the spinlock do not need to save the irq flag. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-02-23[PATCH] sky2: close race on IRQ mask update.Stephen Hemminger
Need to avoid race in updating IRQ mask. This can probably be replaced smarter use of the interrupt control registers (if/when chipset docs are available). Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-02-23[PATCH] sky2: use device iomem to access PCI configStephen Hemminger
To avoid problems with PCI config access without ACPI (or busted ACPI tables), use the device's window into PCI config space. I know this probably will upset the purists, but I would rather have users than ACPI testers. It also generates less code. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-02-23[PATCH] sky2: force early transmit statusStephen Hemminger
Need to force a transmit coalesce timer restart after processing transmit packets. Otherwise, can get transmit status after last update and chip doesn't send the next one. Can go with the chip defaults for coalescing timers, except for Tx timer which needs to be bigger. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-02-23[PATCH] sky2: poke coalescing timer to fix hangStephen Hemminger
Need to restart the interrupt coalescing timer after clearing the interrupt, to avoid races with interrupt timer and processing. Patch from Carl-Daniel Halfinger Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-02-23[PATCH] sky2: limit coalescing values to ring sizeStephen Hemminger
Don't allow coalescing values to be bigger than the transmit ring. Since if you set them that big, the interrupt never happens and driver livelocks. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-02-23[PATCH] sky2: yukon-ec-u chipset initializationStephen Hemminger
Add more complete setup code for Yukon EC_U chipset. Based on matching code in 8.31 code in SysKonnect vendor driver. Signed-off-by: Stephen Hemminger <shemminger@osdl.org>
2006-02-20Merge master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
2006-02-20[PATCH] ipw2200: Suppress warning messageZhu Yi
The following message will be only printed if DEBUG_NOTIF is on. "Unknown notification: subtype=40,flags=0xa0,size=40" Signed-off-by: Zhu Yi <yi.zhu@intel.com> Cc: James Ketrenos <jketreno@linux.intel.com> Cc: Jeff Garzik <jgarzik@pobox.com> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-19[IRDA]: irda-usb bug fixesJean Tourrilhes
This patch fixes 2 bugs in the USB-IrDA code. The first one is a buffer overrun in the RX path. We are now using IRDA_SKB_MAX_MTU when initializing the Rx URB. The second one is a potential stack recursion when unplugging the USB dongle. It seems that first we get the Rx URB with a generic error code, and after a while the Rx URB comes again with a "disconnect" error code. Since we are resubmitting the Rx URB immediately after receiving the first error one, we might enter an endless loop. When getting an error Rx URB, the patch defers the Rx URB resubmitting so that it gives us a chance to catch the disconnect one, in case the dongle has juts been unplugged. Tested against 2.6.16-rc2. Patch from Jean Tourrilhes Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Samuel Ortiz <samuel.ortiz@nokia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-17[PATCH] bonding: fix a locking bug in bond_releaseJay Vosburgh
bond_release returns EINVAL without releasing the bond lock if the slave device is not being bonded by the bond. The following patch ensures that the lock is released in this case. Signed-off-by: Stephen J. Bevan <stephen@dino.dnsalias.com> Acked-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] smctr warning fixAndrew Morton
drivers/net/tokenring/smctr.c: In function `smctr_load_firmware': drivers/net/tokenring/smctr.c:2981: warning: assignment discards qualifiers from pointer target type Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] sky2: speed setting fixStephen Hemminger
Users report problems w/ auto-negotiation disabled and the link set to 100/Half or 10/Half. Problems range from poor performance to no link at all. The current sky2 code does not set things properly on link up if autonegotiation is disabled. Plus it does not contemplate a 10Mbit setting at all. This patch corrects that. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] skge: speed settingStephen Hemminger
This is a clone of John Linville's fixed for speed setting on sky2 driver. The skge driver has the same code (and bug). It would not allow manually forcing 100 and 10 mbit. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] skge: no longer experimentalStephen Hemminger
Take the experimental dependency of skge driver, it is as stable as the others. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] sk98lin: no d-link support (kconfig)Stephen Hemminger
The sk98lin driver was changed a while ago to remove support for the D-Link 530T card because that hardware has no working VPD data. The help text for Kconfig was not updated. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17[PATCH] Wavelan_cs bitfield fixesJean Tourrilhes
Some bitfields were incorrectly initialised in wavelan_cs, causing some compiler warning. Also killed a error message that should not be there... Signed-off-by: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-17Merge branch 'for-jeff' of ↵Jeff Garzik
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6
2006-02-17[PATCH] wireless/atmel: fix Open System authentication process bugsDan Williams
This patch fixes a number of bugs in the authentication process: 1) When falling back to Shared Key authentication mode from Open System, a missing 'return' would cause the auth request to be sent, but would drop the card into Management Error state. When falling back, the driver should also indicate that it is switching to Shared Key mode by setting exclude_unencrypted. 2) Initial authentication modes were apparently wrong in some cases, causing the driver to attempt Shared Key authentication mode when in fact the access point didn't support that mode or even had WEP disabled. The driver should set the correct initial authentication mode based on wep_is_on and exclude_unencrypted. 3) Authentication response packets from the access point in Open System mode were getting ignored because the driver was expecting the sequence number of a Shared Key mode response. The patch separates the OS and SK mode handling to provide the correct behavior. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-17[PATCH] wireless/atmel: fix setting TX key only in ENCODEEXTDan Williams
The previous patch that added ENCODEEXT and AUTH support to the atmel driver contained a slight error which would cause just setting the TX key index to also set the encryption key again. This patch allows any combination of setting the TX key index and setting an encryption key. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2006-02-16sis190: early setting of the pci driver private dataFrancois Romieu
Below this point, the error path will proceed through sis190_release_board(). It will happily oops if pci_set_drvdata() has not been issued. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2006-02-13[APPLETALK]: warning fixAndrew Morton
drivers/net/appletalk/cops.c: In function `cops_load': drivers/net/appletalk/cops.c:539: warning: assignment discards qualifiers from pointer target type drivers/net/appletalk/cops.c:547: warning: assignment discards qualifiers from pointer target type Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-02-12[PATCH] orinoco: support smc2532wJesse Allen
The orinoco wireless driver can support the SMC 2532W-B PC Card, so add the id for it. Signed-off-by: Jesse Allen <the3dfxdude@gmail.com> Cc: Pavel Roskin <proski@gnu.org> Cc: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-10[PATCH] wrong firmware location in IPW2100 Kconfig entryJesper Juhl
Firmware should go into /lib/firmware, not /etc/firmware. Found by Alejandro Bonilla. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Acked-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-02-08[PATCH] type-safe min() in prism54Al Viro
we do min() on u8 and small integer constant; cast the latter to u8. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-07[PATCH] missing includes in drivers/net/mv643xx_eth.cAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-07[PATCH] bogus asm/delay.h includesAl Viro
asm/delay.h is non-portable; linux/delay.h should be used in generic code. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-07[PATCH] remove bogus asm/bug.h includes.Al Viro
A bunch of asm/bug.h includes are both not needed (since it will get pulled anyway) and bogus (since they are done too early). Removed. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2006-02-07[PATCH] Kbuild menu - hide empty NETDEVICES menu when NET is disabledPaolo 'Blaisorblade' Giarrusso
Make the whole netdevices menu depend on NET, rather than having an empty submenu when networking is disabled. Indeed, almost the whole body of the menu was surrounded by if NETDEVICES, and what was outside depended on NETCONSOLE which is inside the menu. Signed-off-by: Paolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] uli526x warning fixAndrew Morton
drivers/net/tulip/uli526x.c: In function `__check_mode': drivers/net/tulip/uli526x.c:1693: warning: return from incompatible pointer type Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07Merge branch 'for-jeff' of ↵Jeff Garzik
git://electric-eye.fr.zoreil.com/home/romieu/linux-2.6
2006-02-07[PATCH] gianfar: Fix sparse warningsKumar Gala
Fixed sparse warnings mainly due to lack of __iomem. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] dscc4: fix dscc4_init_dummy_skb checkAlexey Dobriyan
It returns a pointer. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] bonding: Sparse warnings fixLuiz Fernando Capitulino
drivers/net/bonding/bond_sysfs.c:263:27: warning: Using plain integer as NULL pointer drivers/net/bonding/bond_sysfs.c:998:26: warning: Using plain integer as NULL pointer drivers/net/bonding/bond_sysfs.c:1126:26: warning: Using plain integer as NULL pointer Signed-off-by: Luiz Capitulino <lcapitulino@mandriva.com.br> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] bonding: allow bond to use TSO if slaves support itJay Vosburgh
Add NETIF_F_TSO (NETIF_F_UFO) to BOND_INTERSECT_FEATURES so that it can be used by a bonding device iff all its slave devices support TSO (UFO). Signed-off-by: Arthur Kepner <akepner@sgi.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] sky2: version 0.15 updateStephen Hemminger
Increase version, and get rid of out-dated comment. Speed setting has worked for quite a while. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] sky2: support msi interrupt (revised)Stephen Hemminger
This hardware supports Message Signaled interrupts. When setting up, use software interrupt to check for bad hardware. Signed-off-by: Stephen Hemminger <shemminger @osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] sky2: add irq to entropy poolStephen Hemminger
The sky2 interrupt can be used to add entropy. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] sky2: clear irq raceStephen Hemminger
Move the interrupt clear to before processing, this avoids a possible races with status delaying. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] sky2: set mac address fixStephen Hemminger
Using the sky2 driver with bonding can result in oopses related to reinitializing the PHY when the MAC address is changed (which bonding is wont to do). This patch changes sky2_set_mac_address to take less drastic measures. This is analagous to the skge patch here: http://lkml.org/lkml/2005/9/29/399 which fixed the issue here: http://bugzilla.kernel.org/show_bug.cgi?id=5271 Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-07[PATCH] sky2: ethtool rx_coalesce settings fixStephen Hemminger
This fixes setting rx_coalesce_usecs_irq via ethtool in sky2. The write was directed to the wrong register. Signed-off-by: Stephen Hemminger <shemminger@osdl.org> Signed-off-by: Carl-Daniel Hailfinger <c-d.hailfinger.devel.2006@gmx.net> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 02:50:42 +0000