aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2008-08-01ath5k: Update phy calibration functionsNick Kossifidis
* Enable I/Q calibration each time we have correction results (we were only enabling calibration during reset). If we don't we commit the same results each time calibration routine is called. * Add some documentation and a TODO on nf calibration * Return -EAGAIN on noise floor timeout/failure Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Update channel functionsNick Kossifidis
* Add channel function for RF2425 (got this from decompiling binary HAL, i have no idea why there is a 5GHz section but i'm looking into it) * Update RF5112 channel function (also got this from decompiling binary HAL) * Set JAPAN setting for channel 14 on all PHY chips Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Add RF2425 initial rfgain valuesNick Kossifidis
* Add initial RF gain settings for RF2425 Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Reorder calibration calls during reset and update hw_set_powerNick Kossifidis
* Update ath5k_hw_reset and add some more documentation about PHY calibration * Fix ath5k_hw_set_power to use AR5K_SLEEP_CTL_SLE_ALLOW for Network sleep * Preserve sleep duration field while setting AR5K_SLEEP_CTL and reduce delays & checks for register's status (got this from decompiling & dumps, it works for me but it needs testing) Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Do ADC test during resetNick Kossifidis
* Do an ADC test during reset to match recent regdumps Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Misc hw_reset updatesNick Kossifidis
* Update hw_reset to calculate some of the values we were using as static * Increase activation to rx delay Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Misc hw_attach fixesNick Kossifidis
* Correctly attach RF2425 * Update SREV values for Radio chips * Update hw_attach to use new SPENDING values * Write a bit after POST for some chips Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Restore saved initval after POSTNick Kossifidis
* Restore saved initial value after POST Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-08-01ath5k: Update register listNick Kossifidis
* Update list of registers * Use updated register macros inside hw.c, initvals.c and debug.c Changes-licensed-under: ISC Signed-off-by: Nick Kossifidis <mickflemm@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-31netdev: Fix lockdep warnings in multiqueue configurations.David S. Miller
When support for multiple TX queues were added, the netif_tx_lock() routines we converted to iterate over all TX queues and grab each queue's spinlock. This causes heartburn for lockdep and it's not a healthy thing to do with lots of TX queues anyways. So modify this to use a top-level lock and a "frozen" state for the individual TX queues. Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-31via-velocity: velocity_init_{rd/tx}_ring use kcalloc(..., GFP_KERNEL).Francois Romieu
Allocate and free everyting outside of the locked section. Spotted-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Fixed-by: Seguier Regis <rseguier@e-teleport.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-31via-velocity: separated struct allow wholesale copy during MTU changes.Francois Romieu
It should help people fix the bugs in my code :o) Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-30irda: replace __FUNCTION__ with __func__Harvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30nsc-ircc: default to dongle type 9 on IBM hardwareMatthew Garrett
This is necessary to set the dongle type on the nsc driver in order to get it to work correctly. Thinkpads all appear to use dongle type 9. This patch defaults nsc devices with an IBM PnP descriptor to use type 9. Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Signed-off-by: Ben Collins <ben.collins@canonical.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2008-07-30tg3: adapt tg3 to use reworked PCI PM codeRafael J. Wysocki
Adapt the tg3 driver to use the reworked PCI PM and make it use the exported PCI PM core functions instead of accessing the PCI PM registers directly by itself. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30net: use the common ascii hex helpersHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-30Merge branch 'upstream-davem' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/netdev-2.6
2008-07-30drivers/net/ehea/ehea_main.c: Release mutex in error handling codeJulia Lawall
The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30sh_eth: Add support of SH7763 to sh_ethNobuhiro Iwamatsu
SH7763 has Ethernet core same as SH7710/SH7712. Positions of some registry are different, but the basic part is the same. I add support of ethernet of sh7763 to sh_eth. Signed-off-by: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30fix NE2000 linkage errorMikael Pettersson
Trying to build with CONFIG_NE2000=m fails with: scripts/mod/modpost -o /tmp/tmp/linux-2.6.27-rc1/Module.symvers -S -s ERROR: "NS8390_init" [drivers/net/ne.ko] undefined! This is because the split of 8390 into pausing and non-pausing versions was incompletely propagated to ne.c. This fixes it. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30[netdrvr] wd: fix build breakage with new NS8390p APIAlan Cox
From: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-30dm9601: don't do usb transfers of data on stackPeter Korsgaard
dm_{read,write}() were doing USB transfers of data on stack, which isn't allowed. Fix it by kmalloc'ing a temporary buffer. Clean up the error handling for short transfers while we're at it. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Acked-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29niu: Fix error checking in niu_ethflow_to_class.Andreas Schwab
The callers of niu_ethflow_to_class expect zero as error, but it returns -1 instead. Signed-off-by: Andreas Schwab <schwab@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-07-29Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2008-07-29S2io: fix statistics flush after a MTU changeBreno Leitao
On s2io driver, when you change the interface MTU, it invokes a card reset, which flush some statistics. This patch solves this problem, and also set the net_device->stats as the default statistics structure, instead of s2io_nic->stats. To do that, s2io_nic->stats turned into a staging area, where is saved statistics of the last hardware statistics query. So, the difference between the current hardware statistics and s2io_nic->stats, is the value that should be summed up, in order to get the correct statistics value, even after a reset. Signed-off-by: Breno Leitao <leitao@linux.vnet.ibm.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29enc28j60: don't specify (wrong) IRQ typeDavid Brownell
Recent changes to the IRQ framework have made passing the wrong trigger type to request_irq() become a fatal error. In the case of the enc28j60 driver, it stopped working in my test harness. (Specifically: the signal detects "pin change" events, both edges, not just falling edges. Similarly, other boards might route it through an inverter. Trigger type are board-specific.) This fixes that problem by the usual fix of expecting board setup code to have set up the correct IRQ trigger type. The best known example of that being x86 setup. Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29blackfin_mac: unneeded assignmentStephen Hemminger
skb->dev is set by eth_type_trans already. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29Merge branch 'for-2.6.27' of git://git.marvell.com/mv643xx_eth into ↵Jeff Garzik
upstream-fixes
2008-07-29cxgb3: Allow 64KB firmware images.Steve Wise
Starting with FW version 7.0, the driver needs to allow larger images. Signed-off-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29Blackfin EMAC Driver: Functional power management supportMichael Hennerich
Reprogram MAC address after resume from Suspend Mem (Blackfin Hibernate looses all CORE and SYSTEM register content) Signed-off-by: Michael Hennerich <michael.hennerich@analog.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29Blackfin EMAC Driver: enable TXDWA new feature for new silicon (rev > 0.2)Bryan Wu
Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29Blackfin EMAC Driver: add proper __devinit/__devexit markingsMike Frysinger
Signed-off-by: Mike Frysinger <vapier.adi@gmail.com> Signed-off-by: Bryan Wu <cooloney@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29forcedeth bug fix: realtek phy 8211c errataAyaz Abdulla
This patch adds support for the realtek 8211c phy. The driver must perform a hardware reset of the phy due to an errata where the phy could not detect the link. Signed-off-by: Ayaz Abdulla <aabdulla@nvidia.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-07-29PS3: gelic: use unsigned long for irqflagsVegard Nossum
The semantic patch I used was this: @@ expression lock; identifier flags; expression subclass; @@ - unsigned int flags; + unsigned long flags; ... <+... ( spin_lock_irqsave(lock, flags) | _spin_lock_irqsave(lock) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | read_lock_irqsave(lock, flags) | _read_lock_irqsave(lock) | read_unlock_irqrestore(lock, flags) | _read_unlock_irqrestore(lock, flags) | write_lock_irqsave(lock, flags) | _write_lock_irqsave(lock) | write_unlock_irqrestore(lock, flags) | _write_unlock_irqrestore(lock, flags) | spin_lock_irqsave_nested(lock, flags, subclass) | _spin_lock_irqsave_nested(lock, subclass) | spin_unlock_irqrestore(lock, flags) | _spin_unlock_irqrestore(lock, flags) | _raw_spin_lock_flags(lock, flags) | __raw_spin_lock_flags(lock, flags) ) ...+> This patch was generated using the Coccinelle framework. Cc: Masakazu Mokuno <mokuno@sm.sony.co.jp> Cc: Julia Lawall <julia@diku.dk> Cc: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Vegard Nossum <vegard.nossum@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: partially fix skb->cb useJohannes Berg
This patch fixes mac80211 to not use the skb->cb over the queue step from virtual interfaces to the master. The patch also, for now, disables aggregation because that would still require requeuing, will fix that in a separate patch. There are two other places (software requeue and powersaving stations) where requeue can happen, but that is not currently used by any drivers/not possible to use respectively. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rtl8187: Improve wireless statistics for RTL8187BLarry Finger
Wireless statistics produced by the RTL8187B driver are not particularly informative about the strength of the received signal. From the data sheet provided by Realtek, I discovered that certain parts of the RX header should have the information necessary to calculate signal quality and strength. With testing, it became clear that most of these quantities were very jittery - only the AGC correlated with the signals expected from nearby AP's. As a result, the quality and strength are derived from the agc value. The scaling has been determined so that the numbers are close to those obtained by b43 under the same conditions. The results are qualitatively correct. Statistics derived for the RTL8187 have not been changed. The RX header variables have been renamed to match the quantites described in the Realtek data sheet. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rtl8187: Fix for TX sequence number problemLarry Finger
"mac80211: fix TX sequence numbers" broke rtl8187. This patch makes the same kind of fix that was done for rt2x00. Note that this code will have to be reworked for proper sequence numbers on beacons. In addition, the sequence number has been placed in the hardware state, not the vif state. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29mac80211: fix sparse integer as NULL pointer warningHarvey Harrison
drivers/net/wireless/mac80211_hwsim.c:503:20: warning: Using plain integer as NULL pointer Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29drivers/net/wireless/iwlwifi/iwl-led.c: printk fixAndrew Morton
ia64: drivers/net/wireless/iwlwifi/iwl-led.c: In function `iwl_get_blink_rate': drivers/net/wireless/iwlwifi/iwl-led.c:271: warning: long long int format, s64 arg (arg 6) drivers/net/wireless/iwlwifi/iwl-led.c:271: warning: long long int format, u64 arg (arg 7) We do not know what type the architecture uses to impement u64 and s64, hence we must cast the variables for printing. Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: John W. Linville <linville@tuxdriver.com> Cc: Zhu Yi <yi.zhu@intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rt2x00: Clear queue entry flags during initializationIvo van Doorn
When the queues are being initialized the entry flags fields must be reset to 0. When this does not happen some entries might still be marked as "occupied" after an ifdown & ifup cycle which would trigger errors when the entry is being accessed: phy0 -> rt2x00queue_write_tx_frame: Error - Arrived at non-free entry in the non-full queue 0. Please file bug report to http://rt2x00.serialmonkey.com. This also fixes the mac80211 warning: ------------[ cut here ]------------ WARNING: at net/mac80211/tx.c:1238 ieee80211_master_start_xmit+0x30a/0x350 [mac80211]() which was triggered by the queue error. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rt2x00: Force full register config after start()Ivo van Doorn
rt2x00 will only perform configuration changes from mac80211 when the configuration option has changed. This means it keeps track of the current active configuration and will check these values when the config() callback function is used. However this causes breakage when the interface has been brought down and up again, since all stored active values aren't reset while the registers might have. This is for example the case with rt61pci antenna registers which will jump to invalid values when the interface has been started. To make sure a full configuration takes place after the start() callback function, a new flag is added which will be checked during config() and skips the "what's changed" phase. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29b43legacy: Release mutex in error handling codeJulia Lawall
The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Michael Buesch <mb@bu3sch.de> Cc: stable <stable@kernel.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29drivers/net/wireless/ipw2100.c: Release mutex in error handling codeJulia Lawall
The mutex is released on a successful return, so it would seem that it should be released on an error return as well. The semantic patch finds this problem is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ expression l; @@ mutex_lock(l); ... when != mutex_unlock(l) when any when strict ( if (...) { ... when != mutex_unlock(l) + mutex_unlock(l); return ...; } | mutex_unlock(l); ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rt2x00: Fix memleak when RTS/CTS failsIvo van Doorn
When sending the RTS/CTS frame fails, we should free the skb buffer which was created. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rt2x00: Fix QOS sequence countingIvo van Doorn
When IEEE80211_TX_CTL_ASSIGN_SEQ is not set, the driver should disable hardware sequence counting to make sure the mac80211 provided counter is used. This fixes QOS sequence counting, since that is one of the cases where mac80211 provides a seperate sequence counter. By moving the sequence counting code to rt2x00queue we make sure that _all_ frames get the sequence counter, including RTS/CTS and Beacon frames. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rt2x00: Fix the beacon length bugIwo Mergler
When setting up a beacon template, the length of the beacon is calculated with the assumption that the SKB already contains the Tx descriptor. In the case of beacons it doesn't. This patch undoes the damage by adding the Tx descriptor length to the beacon length. This is safe, because the shortest possible beacon is longer than the Tx header. Signed-off-by: Iwo Mergler <Iwo@call-direct.com.au> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rt2x00: Large vendor requests for rt73usb firmware upload and beaconsIwo Mergler
Switches rt73usb to use large vendor requests for firmware and beacons. This also fixes the garbled beacon bug. Signed-off-by: Iwo Mergler <Iwo@call-direct.com.au> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rt2x00: Support for large vendor requestsIwo Mergler
Adds an extra rt2x00 vendor request function to support register transfers beyond the CSR_CACHE_SIZE / USB packet size limit. This is useful for firmware uploads, beacon templates and keys, all of which are to large to do with a single USB request. Signed-off-by: Iwo Mergler <Iwo@call-direct.com.au> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rt2x00: Fix EIFS timing valueIvo van Doorn
Olivier reported a difference between the EIFS values used in the legacy driver and the one in the rt2x00 drivers. In rt2x00 the value was ( SIFS + (8 * (IEEE80211_HEADER + ACK_SIZE)) ) which comes down to 314us while the legacy driver uses the value 364us This was caused because EIFS is: SIFS + DIFS + AckTime This patch will fix this by adding the DIFS by the above value, and creating a SHORT_EIFS define which uses the SHORT_DIFS. Reported-by: Olivier Cornu <o.cornu@gmail.com> Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2008-07-29rt2x00: Remove duplicate declarationIvo van Doorn
rt2x00queue_free_skb() was declared twice. Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-04 06:54:13 +0000