aboutsummaryrefslogtreecommitdiff
path: root/drivers/net
AgeCommit message (Collapse)Author
2009-07-203c589_cs: re-initialize the multicast in the tc589_resetKen Kawasaki
3c589_cs: re-initialize the multicast in the tc589_reset, and spin_lock the set_multicast_list function. Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20netxen: fix thermal check and shutdownDhananjay Phadke
Check temperature for all PCI functions, that can allow graceful shutdown of all interfaces on the overheated card. Old code was only monitoring temperature for function 0 only. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20netxen: fix deadlock on dev closeDhananjay Phadke
netxen: fix deadlock on dev close The tx ring accounting fix in commit cb2107be43d2fc5eadec58b92b ("netxen: fix tx ring accounting") introduced intermittent deadlock when inteface is going down. This was possibly combined effect of speculative tx pause, calling netif_tx_lock instead of queue lock and unclean synchronization with napi which could end up unmasking interrupt. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20netxen: fix context deletion sequenceDhananjay Phadke
o Use D3 reset context deletion for NX2031, it cleans up more resources in the firmware. o Release rx buffers after hardware context has been reset. o Delete tx context after rx context, some firmware control commands are sent on tx context, so it should be the last to go. Signed-off-by: Dhananjay Phadke <dhananjay@netxen.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20net: Micrel KS8851 SPI network driverBen Dooks
Network driver for the SPI version of the Micrel KS8851 network chip. Signed-off-by: Ben Dooks <ben@simtec.co.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-20Add mac driver for w90p910Wan ZongShun
Add mac driver support for evaluation board based on w90p910. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-17Update Andreas Koensgen's email addressRalf Baechle
The kernel has used a stale email address of Andreas for a few years. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16cdc-eem: bad crc checkingVincent CUISSARD
When the driver received an EEM packet with CRC option enabled, driver must compute and check the CRC of the Ethernet data. Previous version computes CRC on Ethernet data plus the original CRC value. Skbuff is correctly trimed but the old length is used when CRC is computed. Signed-off-by: Vincent CUISSARD <vincent.cuissard@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16ixgbe: Remove DPRINTK messages in DCB modeLucy Liu
Remove debug DPRINTK in DCB mode netlink interface. Signed-off-by: Lucy Liu <lucy.liu@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16ixgbe: clear mac address data block in DCB modeLucy Liu
This change clears the address data block memory space, which is needed for the 82598 which does not have a SAN MAC. Signed-off-by: Lucy Liu <lucy.liu@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16sky2: revert shutdown changesStephen Hemminger
The commit changes to shutdown path broke startup on some systems. revert commit c0bad0f2e4366d5bbfe0c4a7a80bca8f4b05272b Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16E100: work around the driver using streaming DMA mapping for RX descriptors.Krzysztof Halasa
E100 places it's RX packet descriptors inside skb->data and uses them with bidirectional streaming DMA mapping. Unfortunately it fails to transfer skb->data ownership to the device after it reads the descriptor's status, breaking on non-coherent (e.g., ARM) platforms. This have to be converted to use coherent memory for the descriptors. Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl> Acked-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16bonding: clean muticast addresses when device changes typeMoni Shoua
Bonding device forbids slave device of different types under the same master. However, it is possible for a bonding master to change type during its lifetime. This can be either from ARPHRD_ETHER to ARPHRD_INFINIBAND or the other way arround. The change of type requires device level multicast address cleanup because device level multicast addresses depend on the device type. The patch adds a call to dev_close() before the bonding master changes type and dev_open() just after that. In the example below I enslaved an IPoIB device (ib0) under bond0. Since each bonding master starts as device of type ARPHRD_ETHER by default, a change of type occurs when ib0 is enslaved. This is how /proc/net/dev_mcast looks like without the patch 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 01005e000116 5 bond0 1 0 01005e7ffffd 5 bond0 1 0 01005e000001 5 bond0 1 0 333300000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 333300000001 6 ib0 1 0 01005e000001 6 ib0 1 0 01005e7ffffd 6 ib0 1 0 01005e000116 6 ib0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff00000000000000000001 and this is how it looks like after the patch. 5 bond0 1 0 00ffffffff12601bffff000000000001ff96ca05 5 bond0 1 0 00ffffffff12601bffff00000000000000000001 5 bond0 1 0 00ffffffff12401bffff0000000000000ffffffd 5 bond0 1 0 00ffffffff12401bffff00000000000000000116 5 bond0 1 0 00ffffffff12401bffff00000000000000000001 6 ib0 1 0 00ffffffff12601bffff000000000001ff96ca05 6 ib0 1 0 00ffffffff12401bffff00000000000000000116 6 ib0 1 0 00ffffffff12401bffff0000000000000ffffffd 6 ib0 2 0 00ffffffff12401bffff00000000000000000001 6 ib0 2 0 00ffffffff12601bffff00000000000000000001 Signed-off-by: Moni Shoua <monis@voltaire.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16atl1c: misplaced parenthesisroel kluin
Fix misplaced parenthesis Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-16atl1c: add missing parenthesesroel kluin
Parentheses are required or the comparison occurs before the bitand. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-14Revert "NET: Fix locking issues in PPP, 6pack, mkiss and strip line ↵David S. Miller
disciplines." This reverts commit adeab1afb7de89555c69aab5ca21300c14af6369. As Alan Cox explained, the TTY layer changes that went recently to get rid of the tty->low_latency stuff fixes this already, and even for -stable it's the ->low_latency changes that should go in to fix this, rather than this patch. Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-14drivers/net: using spin_lock_irqsave() in net_send_packet()Dongdong Deng
spin_unlock_irq() will enable interrupt in net_send_packet(), this patch changes it to spin_lock_irqsave/spin_lock_irqrestore, so that it doesn't enable interrupts when already disabled, and netconsole would work properly over cs89x0/isa-skeleton. Call trace: netconsole write_msg() { ... -> spin_lock_irqsave(); -> netpoll_send_udp() -> netpoll_send_skb() -> net_send_packet() ->... -> spin_unlock_irqrestore(); ... } Signed-off-by: Dongdong Deng <dongdong.deng@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-14NET: phy_device, fix lock imbalanceJiri Slaby
Don't forget to unlock a mutex in phy_scan_fixups on a fail path. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-13igb: gcc-3.4.6 fixEric Dumazet
forward declaration of inline function should be avoided, or old gcc cannot compile. Reported-by: Teck Choon Giam <giamteckchoon@gmail.com> Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-13atlx: duplicate testing of MCAST flagroel kluin
Fix duplicate testing of MCAST flag Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: Jay Cliburn <jcliburn@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12NET: Fix locking issues in PPP, 6pack, mkiss and strip line disciplines.Ralf Baechle
Guido Trentalancia reports: I am trying to use the kiss driver in the Linux kernel that is being shipped with Fedora 10 but unfortunately I get the following oops: mkiss: AX.25 Multikiss, Hans Albas PE1AYX mkiss: ax0: crc mode is auto. ADDRCONF(NETDEV_CHANGE): ax0: link becomes ready ------------[ cut here ]------------ WARNING: at kernel/softirq.c:77 __local_bh_disable+0x2f/0x83() (Not tainted) [...] unloaded: microcode] Pid: 0, comm: swapper Not tainted 2.6.27.25-170.2.72.fc10.i686 #1 [<c042ddfb>] warn_on_slowpath+0x65/0x8b [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c04228b4>] ? __enqueue_entity+0xe3/0xeb [<c042431e>] ? enqueue_entity+0x203/0x20b [<c0424361>] ? enqueue_task_fair+0x3b/0x3f [<c041f88c>] ? resched_task+0x3a/0x6e [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c06ab4e2>] ? _spin_lock_bh+0xb/0x16 [<c043255b>] __local_bh_disable+0x2f/0x83 [<c04325ba>] local_bh_disable+0xb/0xd [<c06ab4e2>] _spin_lock_bh+0xb/0x16 [<f8b6f600>] mkiss_receive_buf+0x2fb/0x3a6 [mkiss] [<c0572a30>] flush_to_ldisc+0xf7/0x198 [<c0572b12>] tty_flip_buffer_push+0x41/0x51 [<f89477f2>] ftdi_process_read+0x375/0x4ad [ftdi_sio] [<f8947a5a>] ftdi_read_bulk_callback+0x130/0x138 [ftdi_sio] [<c05d4bec>] usb_hcd_giveback_urb+0x63/0x93 [<c05ea290>] uhci_giveback_urb+0xe5/0x15f [<c05eaabf>] uhci_scan_schedule+0x52e/0x767 [<c05f6288>] ? psmouse_handle_byte+0xc/0xe5 [<c054df78>] ? acpi_ev_gpe_detect+0xd6/0xe1 [<c05ec5b0>] uhci_irq+0x110/0x125 [<c05d4834>] usb_hcd_irq+0x40/0xa3 [<c0465313>] handle_IRQ_event+0x2f/0x64 [<c046642b>] handle_level_irq+0x74/0xbe [<c04663b7>] ? handle_level_irq+0x0/0xbe [<c0406e6e>] do_IRQ+0xc7/0xfe [<c0405668>] common_interrupt+0x28/0x30 [<c056821a>] ? acpi_idle_enter_simple+0x162/0x19d [<c0617f52>] cpuidle_idle_call+0x60/0x92 [<c0403c61>] cpu_idle+0x101/0x134 [<c069b1ba>] rest_init+0x4e/0x50 ======================= ---[ end trace b7cc8076093467ad ]--- ------------[ cut here ]------------ WARNING: at kernel/softirq.c:136 _local_bh_enable_ip+0x3d/0xc4() [...] Pid: 0, comm: swapper Tainted: G W 2.6.27.25-170.2.72.fc10.i686 [<c042ddfb>] warn_on_slowpath+0x65/0x8b [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c04228b4>] ? __enqueue_entity+0xe3/0xeb [<c042431e>] ? enqueue_entity+0x203/0x20b [<c0424361>] ? enqueue_task_fair+0x3b/0x3f [<c041f88c>] ? resched_task+0x3a/0x6e [<c06ab62b>] ? _spin_unlock_irqrestore+0x22/0x38 [<c06ab4e2>] ? _spin_lock_bh+0xb/0x16 [<f8b6f642>] ? mkiss_receive_buf+0x33d/0x3a6 [mkiss] [<c04325f9>] _local_bh_enable_ip+0x3d/0xc4 [<c0432688>] local_bh_enable_ip+0x8/0xa [<c06ab54d>] _spin_unlock_bh+0x11/0x13 [<f8b6f642>] mkiss_receive_buf+0x33d/0x3a6 [mkiss] [<c0572a30>] flush_to_ldisc+0xf7/0x198 [<c0572b12>] tty_flip_buffer_push+0x41/0x51 [<f89477f2>] ftdi_process_read+0x375/0x4ad [ftdi_sio] [<f8947a5a>] ftdi_read_bulk_callback+0x130/0x138 [ftdi_sio] [<c05d4bec>] usb_hcd_giveback_urb+0x63/0x93 [<c05ea290>] uhci_giveback_urb+0xe5/0x15f [<c05eaabf>] uhci_scan_schedule+0x52e/0x767 [<c05f6288>] ? psmouse_handle_byte+0xc/0xe5 [<c054df78>] ? acpi_ev_gpe_detect+0xd6/0xe1 [<c05ec5b0>] uhci_irq+0x110/0x125 [<c05d4834>] usb_hcd_irq+0x40/0xa3 [<c0465313>] handle_IRQ_event+0x2f/0x64 [<c046642b>] handle_level_irq+0x74/0xbe [<c04663b7>] ? handle_level_irq+0x0/0xbe [<c0406e6e>] do_IRQ+0xc7/0xfe [<c0405668>] common_interrupt+0x28/0x30 [<c056821a>] ? acpi_idle_enter_simple+0x162/0x19d [<c0617f52>] cpuidle_idle_call+0x60/0x92 [<c0403c61>] cpu_idle+0x101/0x134 [<c069b1ba>] rest_init+0x4e/0x50 ======================= ---[ end trace b7cc8076093467ad ]--- mkiss: ax0: Trying crc-smack mkiss: ax0: Trying crc-flexnet The issue was, that the locking code in mkiss was assuming it was only ever being called in process or bh context. Fixed by converting the involved locking code to use irq-safe locks. Review of other networking line disciplines shows that 6pack, both sync and async PPP and STRIP have similar issues. The ppp_async one is the most interesting one as it sorts out half of the issue as far back as 2004 in commit http://git.kernel.org/?p=linux/kernel/git/tglx/history.git;a=commitdiff;h=2996d8deaeddd01820691a872550dc0cfba0c37d Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Reported-by: Guido Trentalancia <guido@trentalancia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12netdev: restore MTU change operationBen Hutchings
alloc_etherdev() used to install a default implementation of this operation, but it must now be explicitly installed in struct net_device_ops. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-12netdev: restore MAC address set and validate operationsBen Hutchings
alloc_etherdev() used to install default implementations of these operations, but they must now be explicitly installed in struct net_device_ops. Signed-off-by: Ben Hutchings <ben@decadent.org.uk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-09cxgb3: Fix crash caused by stashing wrong netdev_queueRoland Dreier
Commit c3a8c5b6 ("cxgb3: move away from LLTX") exposed a bug in how cxgb3 looks up the netdev_queue it stashes away in a qset during initialization. For multiport devices, the TX queue index it uses is offset by the first_qset index of each port. This leads to a crash once LLTX is removed, since hard_start_xmit is called with one TX queue lock held, while the TX reclaim timer task grabs a different (wrong) TX queue lock when it frees skbs. Fix this by removing the first_qset offset used to look up the TX queue passed into t3_sge_alloc_qset() from setup_sge_qsets(). Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-09ixgbe: Fix coexistence of FCoE and Flow Director in 82599Yi Zou
Fix coexistence of Fiber Channel over Ethernet (FCoE) and Flow Director (FDIR) in 82599 and remove the disabling of FDIR when FCoE is enabled. Currently, FDIR is turned off when FCoE is enabled under the assumption that FCoE is always enabled with DCB being turned on. However, FDIR does not have to be turned off all the time when FCoE is enabled since FCoE can be enabled without DCB being turned on, e.g., use link pause only. This patch makes sure that when DCB is turned on or off, FDIR is turned on or off correspondingly; and when FCoE is enabled, it does not disable FDIR, rather, it will have FDIR set up properly so FCoE and FDIR can coexist regardless of DCB being on or off. Signed-off-by: Yi Zou <yi.zou@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2009-07-08p54: tx refused but queue activeLarry Finger
In the mainline kernel, p54usb will fail because the TX queue length can become < 0. This problem has been reported as Bugzilla #13725. The failure is expressed by the following message in the logs: WARNING: at net/mac80211/tx.c:1325 ieee80211_tx+0x23c/0x298 [mac80211]() Hardware name: HP Pavilion dv2700 Notebook PC tx refused but queue active This problem has been recently observed in the wireless-testing tree, where a full solution is being tested. That fix is too invasive for 2.6.31-rcX, but the simple change supplied here will prevent the failure. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08Atheros Kconfig needs to be dependent on WLAN_80211Jay Sternberg
Atheros top level menu needs a "depends WLAN_80211" to properly indent within menuconfig and xconfig interfaces. This is purely a visual issue but it effects all subsequent drivers. The issue is the top level menu does not include a dependency on WLAN_80211 so within the tree structure, Atheros is at the same level as WLAN_80211 but when WLAN_80211 collapsed, the menu disappears along with all subsequent drives, so it is really a subordinate. Signed-off-by: Jay Sternberg <jay.e.sternberg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08mac80211_hwsim: avoid NULL accessJohannes Berg
There's a race condition -- started can be set to true before channel is set due to the way mac80211 callbacks currently work (->start should probably pass the channel we would like to have initially). For now simply add a check to hwsim to avoid dereferencing the NULL channel pointer. Signed-off-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08b43: Add support for 4318EClyde McPherson
Added support for the Broadcom 4318E chipset on PCMCIA/CF cards. The 4318E can do 802.11A/B/G, only B and G mode are supported in b43. Signed-off-by: Clyde McPherson <ccmcphe@verizon.net> Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08zd1211rw: adding SONY IFU-WLM2 (054c:0257) as a zd1211b deviceHin-Tak Leung
Yevgen Kotikov reported success on the sourceforge zd1211-devs list with the following details: Brand/retail: SONY IFU-WLM2 USB-IDs: Vendor: 0x054C Device: 0x0257 chip ID: zd1211b chip 054c:0257 v4802 high 00-0b-6b AL2230_RF pa0 ----- FCC ID: unknown Signed-off-by: Hin-Tak Leung <htl10@users.sourceforge.net> Tested-by: Yevgen Kotikov <yevgen.kotikov@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08zd1211rw: 07b8:6001 is a ZD1211BPascal Terjan
On a shuttle machine here we got 07b8:6001 device, handled by zd1211rw, which does not work. Scanning is OK but association does not work, we get "direct probe to AP xxx timed out" It appears that this simple patch makes the device work perfectly. This id was already there in initial import of the driver so I don't know if it has ever been working as ZD1211 (which would mean they changed it and kept the id :( ). Signed-off-by: Pascal Terjan <pterjan@mandriva.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-08r6040: bump driver version to 0.24 and date to 08 July 2009Florian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08r6040: restore MIER register correctly when IRQ line is sharedFlorian Fainelli
When the r6040 device IRQ line is shared we will enter the driver interrupt service routine, mask off the device interrupt enable register (MIER) and return with IRQ_NONE, we would then leave the device with interrupts disabled, this patch fixes that issue. Reported-by: Steve Holland <sdh4@iastate.edu> Signed-off-by: Joe Chou <joe.chou@rdc.com.tw> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08davinci_emac: fix kernel oops when changing MAC address while interface is downPablo Bitton
Check that network interface is running before changing its MAC address. Otherwise, rxch is accessed when it's NULL - causing a kernel oops. Moreover, check that the new MAC address is valid. Signed-off-by: Pablo Bitton <pablo.bitton@gmail.com> Signed-off-by: Chaithrika U S <chaithrika@ti.com> Tested-by: Chaithrika U S <chaithrika@ti.com> [tested on DM6467 EVM] Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-08igb: set lan id prior to configuring phyAlexander Duyck
The igb driver was defaulting to using the lock for pci-e function 0 for all of the phys due to the fact that the lan id was not being set prior to initialization. This change makes it so that the function id is set prior to checking for the phy id. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-07iwmc3200wifi: add Kconfig helpSamuel Ortiz
We're missing a Kconfig help for the iwmc3200wifi driver. Signed-off-by: Samuel Ortiz <samuel.ortiz@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07ath9k: Fix leak in tx descriptorVasanthakumar Thiagarajan
When we reclaim the tx desc, we always assume that the last desc is a holding desc, which is not true, and skip it. If the tx queue is drained during channel change, internal reset and etc, the last descriptor may not be the holding descriptor and we fail to reclaim them. This results in the following two issues. 1. Tx stuck - We drop all the frames coming from upper layer due to shortage in tx desc. 2. Crash - If we fail to reclaim a tx descriptor, we miss to update the tx BA window with the seq number of the frame associated to that desc, which, at some point, result in the following crash due to an assert failure in ath_tx_addto_baw(). This patch fixes these two issues. kernel BUG at ../drivers/net/wireless/ath/ath9k/xmit.c:180! [155064.304164] invalid opcode: 0000 [#1] SMP Call Trace: [<fbc6d83b>] ? ath9k_tx+0xeb/0x160 [ath9k] [<fbbc9591>] ipv6? __ieee80211_tx+0x41/0x120 [mac80211] [<fbbcb5ae>] ? aes_i586ieee80211_master_start_xmit+0x28e/0x560 [mac80211] [<c037e501>] aes_generic? _spin_lock_irqsave+0x31/0x40 [<c02f347b>] ? dev_hard_start_xmit+0x16b/0x1c0 [<c03058b5>] ? __qdisc_run+0x1b5/0x200 [<fbbcda5a>] ? af_packetieee80211_select_queue+0xa/0x100 [mac80211] [<c02f53b7>] ? i915dev_queue_xmit+0x2e7/0x3f0 [<fbbc9b49>] ? ieee80211_subif_start_xmit+0x369/0x7a0 [mac80211] [<c031bc35>] ? ip_output+0x55/0xb0 [<c02e0188>] ? show_memcpy_count+0x18/0x60 [<c02eb186>] ? __kfree_skb+0x36/0x90 [<c02f2202>] ? binfmt_miscdev_queue_xmit_nit+0xd2/0x110 [<c02f347b>] ? dev_hard_start_xmit+0x16b/0x1c0 [<c03058b5>] ? __qdisc_run+0x1b5/0x200 [<c033bca7>] ? scoarp_create+0x57/0x2a0 [<c02f53b7>] ? bridgedev_queue_xmit+0x2e7/0x3f0 [<c03034a0>] ? eth_header+0x0/0xc0 [<c033b95f>] stp? arp_xmit+0x5f/0x70 [<c033bf4f>] ? arp_send+0x5f/0x70 [<c033c8f5>] bnep? arp_solicit+0x105/0x210 [<c02fa5aa>] ? neigh_timer_handler+0x19a/0x390 [<c013bf88>] ? run_timer_softirq+0x138/0x210 [<c02fa410>] ? ppdevneigh_timer_handler+0x0/0x390 [<c02fa410>] ? neigh_timer_handler+0x0/0x390 Signed-off-by: Vasanthakumar Thiagarajan <vasanth@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-07b43/b43legacy: fix radio LED initializationLarry Finger
Fix condition in which radio LED did not initialize correctly, and remove 4 compilation warnings. After the recent changes in rfkill, the radio LED used by b43/b43legacy did not always initialize correctly. Both b43 and b43legacy used the deprecated variable radio_enabled in struct ieee80211_conf. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-07-06fec: fix definition of 5272 version of FEC_X_DES_ACTIVE registerGreg Ungerer
fec: fix definition of 5272 version of FEC_X_DES_ACTIVE register The ColdFire 5272 FEC driver has a different register address map than other users of the FEC driver. And its definition of the FEC_X_DES_ACTIVE register is incorrect, it should be 0x14. The fec interface cannot transmit data with the old value. Signed-off-by: Greg Ungerer <gerg@uclinux.org> ---- Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06fec: remove extra ";" from definition namesGreg Ungerer
Signed-off-by: Greg Ungerer <gerg@uclinux.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-06Revert "p54: Use SKB list handling helpers instead of by-hand code."David S. Miller
This reverts commit a1091aae19b1d9c85d91c86915a611387f67a26b.
2009-07-06tun/tap: Fix crashes if open() /dev/net/tun and then poll() it.Mariusz Kozlowski
Fix NULL pointer dereference in tun_chr_pool() introduced by commit 33dccbb050bbe35b88ca8cf1228dcf3e4d4b3554 ("tun: Limit amount of queued packets per device") and triggered by this code: int fd; struct pollfd pfd; fd = open("/dev/net/tun", O_RDWR); pfd.fd = fd; pfd.events = POLLIN | POLLOUT; poll(&pfd, 1, 0); Reported-by: Eugene Kapun <abacabadabacaba@gmail.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05forcedeth: Fix NAPI race.Eric Dumazet
Eric Dumazet a écrit : > Ingo Molnar a écrit : >>> The following changes since commit 52989765629e7d182b4f146050ebba0abf2cb0b7: >>> Linus Torvalds (1): >>> Merge git://git.kernel.org/.../davem/net-2.6 >>> >>> are available in the git repository at: >>> >>> master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6.git master >> Hm, something in this lot quickly wrecked networking here - see the >> tx timeout dump below. It starts with: >> >> [ 351.004596] WARNING: at net/sched/sch_generic.c:246 dev_watchdog+0x10b/0x19c() >> [ 351.011815] Hardware name: System Product Name >> [ 351.016220] NETDEV WATCHDOG: eth0 (forcedeth): transmit queue 0 timed out >> >> Config attached. Unfortunately i've got no time to do bisection >> today. > > > > forcedeth might have a problem, in its netif_wake_queue() logic, but > I could not see why a recent patch could make this problem visible now. > > CPU0/1: AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ stepping 02 > is not a new cpu either :) > > forcedeth uses an internal tx_stop without appropriate barrier. > > Could you try following patch ? > > (random guess as I dont have much time right now) We might have a race in napi_schedule(), leaving interrupts disabled forever. I cannot test this patch, I dont have the hardware... Tested-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05drivers/net/smsc911x.c: Fix resource size off by 1 errorJulia Lawall
The call resource_size(res) returns res->end - res->start + 1 and thus the second change is semantics-preserving. res_size is then used as the second argument of a call to request_mem_region, and the memory allocated by this call appears to be the same as what is released in the two calls to release_mem_region. So the size argument for those calls should be resource_size(size) as well. Alternatively, in the second call to release_mem_region, the second argument could be res_size, as that variable has already been initialized at the point of this call. The problem was found using the following semantic patch: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @@ struct resource *res; @@ - (res->end - res->start) + 1 + resource_size(res) @@ struct resource *res; @@ - res->end - res->start + BAD(resource_size(res)) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05pcnet_cs: add new idKen Kawasaki
add new id (RIOS System PC CARD3 ETHERNET). Signed-off-by: Ken Kawasaki <ken_kawasaki@spring.nifty.jp> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05bnx2x: Fix the maximal values of coalescing timeouts.Eilon Greenstein
This patch properly defines the maximum values for rx/tx coalescing timeouts. Signed-off-by: Vlad Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05bnx2x: Disable HC coalescing when setting timeout to zero.Eilon Greenstein
Problem reported by Flavio Leitner <fleitner@redhat.com>: When setting rx/tx coalescing timeout to the values less than 12 traffic was stopped. The FW supports coalescing in 12us granularity, and so value of less then 12 should be interpreted as disabling coalescing Signed-off-by: Vlad Zolotarov <vladz@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-05tun: Fix device unregister raceHerbert Xu
It is currently possible for an asynchronous device unregister to cause the same tun device to be unregistered twice. This is because the unregister in tun_chr_close only checks whether __tun_get(tfile) != NULL. This however has nothing to do with whether the device has already been unregistered. All it tells you is whether __tun_detach has been called. This patch fixes this by using the most obvious thing to test whether the device has been unregistered. It also moves __tun_detach outside of rtnl_unlock since nothing that it does requires that lock. Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-07-03be2net: fix spurious interrupt handling in intx modeSathya Perla
Occasionally we may see an interrupt without an event in the eq. In intx, we currently see the event queue and return IRQ_NONE causing a the irq to be disabled ("no one cared".) Instead, read the CEV_ISR reg to check the existence of the interrupt. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-29 04:55:13 +0000