aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/hotplug
AgeCommit message (Collapse)Author
2005-07-06[IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver codePrarit Bhargava
This patch is the SGI hotplug driver and additional changes required for the driver. These modifications include changes to the SN io_init.c code for memory management, the inclusion of new SAL calls to enable and disable PCI slots, and a hotplug-style driver. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-06-27[PATCH] cpqphp: fix oops during unload without probeKeith Moore
drivers/pci/hotplug/cpqphp_core.c calls cpqphp_event_start_thread() in one_time_init(), which is called whenever the hardware is probed. Unfortunately, cpqphp_event_stop_thread() is *always* called when the module is unloaded. If the hardware is never probed, then cpqphp_event_stop_thread() tries to manipulate a couple of uninitialized mutexes. Signed-off-by: Keith Moore <keithmo@exmsft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] ACPI based I/O APIC hot-plug: acpiphp supportKenji Kaneshige
This patch adds PCI based I/O xAPIC hot-add support to ACPIPHP driver. When PCI root bridge is hot-added, all PCI based I/O xAPICs under the root bridge are hot-added by this patch. Hot-remove support is TBD. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi hotplug: decouple slot power state changes from physical hotplugRajesh Shah
Current acpiphp code does not distinguish between the physical presence and power state of a device/slot. That is, if a device has to be disabled, it also tries to physically ejects the device. This patch decouples power state from physical presence. You can now echo to the corresponding sysfs power control file to repeatedly enable and disable a device without having to physically re-insert it. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi hotplug: aCPI based root bridge hot-addRajesh Shah
acpiphp changes to support acpi based root bridge hot-add. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi hotplug: fix slot power-down problem with acpiphpRajesh Shah
Earlier I reported that Matthew's acpiphp rewrite had problem in powering down slot on my i386 system. The following patch is needed to get the acpiphp rewrite properly powering down the slot. Signed-off-by: Dely Sy <dely.l.sy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi hotplug: clean up notify handlers on acpiphp unloadRajesh Shah
A root bridge may not have directly attached hotpluggable slots under it. Instead, it may have p2p bridges with slots under it. In this case, we need to clean up the p2p bridges and slots properly too. Patch below applies on top of the original patch, and fixes this problem. Without this, acpiphp leaves behind notify handlers on module unload, and subsequent module load attempts don't work properly too. Patch was tested on an ia64 Tiger4 box. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi hotplug: convert acpiphp to use generic resource codeRajesh Shah
This patch converts acpiphp to use the generic PCI resource assignment code. It's quite large, but most of it is deleting the acpiphp_pci and acpiphp_res files. It's tested on an hp Integrity rx8620 (which won't work without this patch). Testers with other hardware welcomed. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Driver Core: drivers/i2c/chips/w83781d.c - ↵Yani Ioannou
drivers/s390/block/dcssblk.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] sysfs: (driver/pci) if show/store is missing return -EIODmitry Torokhov
sysfs: fix drivers/pci so if an attribute does not implement show or store method read/write will return -EIO instead of 0. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-09[PATCH] PCI Hotplug: fix CPCI reference counting bugScott Murray
Here's a patch that fixes up the pci_dev refcounting in the CPCI code. I've done some testing against it and it seems fine here. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31[PATCH] PCI Hotplug: more CPCI updatesScott Murray
Here is my third attempt at a patch to further update the CompactPCI hotplug driver infrastructure to address the pci_enable_device issue discussed on the list as well as a few other issues I discovered during some more testing. This version addresses a few more issues pointed out by Prarit Bhargava. Changes include: - cpci_enable_device and its recursive calling of pci_enable_device on new devices removed. - Use list_rwsem to avoid slot status change races between disable_slot and check_slots. - Fixed oopsing in cpci_hp_unregister_bus caused by calling list_del on a slot after calling pci_hp_deregister. - Removed kfree calls in cleanup_slots since release_slot will have done it already. - Reworked init_slots a bit to fix latch and adapter file updating on subsequent calls to cpci_hp_start. - Improved sanity checking in cpci_hp_register_controller. - Now shut things down correctly in cpci_hotplug_exit. - Switch to pci_get_slot instead of deprecated pci_find_slot. - A bunch of CodingStyle fixes. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31[PATCH] PCI Hotplug: SHPCHP driver doesn't enable PERR and SERR properlyKenji Kaneshige
Current shpchp driver doesn't seem to program command register to enable PERR and SERR properly. The following patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31[PATCH] PCI Hotplug: shpchp driver doesn't program _HPP values properlyKenji Kaneshige
Current shpchp driver doesn't seem to program _HPP values properly. The following patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] PCI Hotplug: CPCI updateScott Murray
[PATCH] CPCI: update I have finally done some work to update the CompactPCI hotplug driver to fix some of the outstanding issues in 2.6: - Added adapter and latch status ops so that those files will get created by the current PCI hotplug core. This used to not be required, but seems to be now after some of the sysfs rework in the core. - Replaced slot list spinlock with a r/w semaphore to avoid any potential issues with sleeping. This quiets all of the runtime warnings. - Reworked interrupt driven hot extraction handling to remove need for a polling operator for ENUM# status. There are a lot of boards that only have an interrupt driven by ENUM#, so this lowers the bar to entry. - Replaced pci_visit_dev usage with better use of the PCI core functions. The new code is functionally equivalent to the previous code, but the use of pci_enable_device on insert needs to be investigated further, as I need to do some more testing to see if it is still necessary. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] PCI Hotplug: get pciehp to work on the downstream port of a switchDely Sy
Here is the updated patch to get pciehp driver to work for downstream port of a switch and handle the difference in the offset value of PCI Express capability list item of different ports. Signed-off-by: Dely Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-17[PATCH] PCI Hotplug: Fix echoing 1 to power file of enabled slot problem ↵Dely Sy
with SHPC driver Here is a patch to fix the problem of echoing 1 to "power" file to enabled slot causing the slot to power down, and echoing 0 to disabled slot causing shpchp_disabled_slot() to be called twice. This problem was reported by kenji Kaneshige. Thanks, Dely Signed-off-by: Dely Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03[PATCH] PCI Hotplug: fix pciehp regressionDely Sy
I fogot to remove the code that freed the memory in cleanup_slots(). Here is the new patch, which I have also taken care of the comment by Eike to remove the cast in hotplug_slot->private. Signed-off-by: Dely Sy <dely.l.sy@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03[PATCH] PCI: Spelling fixes for drivers/pci.Steven Cole
Here are some spelling corrections for drivers/pci. CONTROLER -> CONTROLLER Regisetr -> Register harware -> hardware inital -> initial Initilize -> Initialize funtion -> function funciton -> function occured -> occurred Signed-off-by: Steven Cole <elenstev@mesatop.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-03[PATCH] PCI Hotplug ibmphp_pci.c: Fix masking out needed information too earlyRolf Eike Beer
here is the patch that fixes the bug introduced by my previous patch which already went into 2.6.12-rc2 and is likely to cause trouble is someone hits one the else case here by accident. Using the &= operation before the if statement destroys the information the if asks for so we always go into the else branch. Signed-off-by: Rolf Eike Beer <eike-hotplug@sf-tec.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16[PATCH] fix u32 vs. pm_message_t in PCI, PCIEPavel Machek
This fixes drivers/pci (mostly pcie stuff). Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!