aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/pci.c
AgeCommit message (Collapse)Author
2008-10-23PCI: fix ARI code to be compatible with mixed ARI/non-ARI systemsZhao, Yu
The original ARI support code has a compatibility problem with non-ARI devices. If a device doesn't support ARI, turning on ARI forwarding on its upper level bridge will cause undefined behavior. This fix turns on ARI forwarding only when the subordinate devices support it. Tested-by: Suresh Siddha <suresh.b.siddha@intel.com> Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22PCI: add support for function level resetSheng Yang
Sometimes, it's necessary to enable software's ability to quiesce and reset endpoint hardware with function-level granularity, so provide support for it. The patch implement Function Level Reset(FLR) feature following PCI-e spec. And this is the first step. We would add more generic method, like D0/D3, to allow more devices support this function. The patch contains two functions. pcie_reset_function() is the new driver API, and, contains some action to quiesce a device. The other function is a helper: pcie_execute_reset_function() just executes the reset for a particular device function. Current the usage model is in KVM. Function reset is necessary for assigning device to a guest, or moving it between partitions. For Function Level Reset(FLR), please refer to PCI Express spec chapter 6.6.2. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-22ACPI/PCI: Set support bit for MSI in support field of _OSCTaku Izumi
Currently linux doesn't have any code to set the "MSI supported" bit in Support Fireld of _OSC. This patch adds the code for that. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: support PCIe ARI capabilityYu Zhao
This patch adds support for PCI Express Alternative Routing-ID Interpretation (ARI) capability. The ARI capability extends the Function Number field of the PCI Express Endpoint by reusing the Device Number which is otherwise hardwired to 0. With ARI, an Endpoint can have up to 256 functions. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: replace cfg space size (256/4096) by macros.Zhao, Yu
This is a cleanup that changes all PCI configuration space size representations to the macros (PCI_CFG_SPACE_SIZE and PCI_CFG_SPACE_EXP_SIZE). And the macros are also moved from drivers/pci/probe.c to drivers/pci/pci.h. Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: fix -Wakpm warnings in pci_pm_init debug outputJesse Barnes
Checkpatch would have complained about this but neither Bjorn nor myself ran it prior to pushing. Fixup the issues Andrew pointed out. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI: tidy PME support messagesBjorn Helgaas
This patch changes these two messages: pci 0000:00:03.0: supports D1 pci 0000:00:03.0: supports D2 to this: pci 0000:00:03.0: supports D1 D2 It also trivially converts a "dev_printk(KERN_INFO, ...)" to "dev_info(...)". Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20PCI PM: Introduce function pci_wake_from_d3Rafael J. Wysocki
Many device drivers use the following sequence of statements to enable the device to wake up the system while being in the D3_hot or D3_cold low power state: pci_enable_wake(pdev, PCI_D3hot, 1); pci_enable_wake(pdev, PCI_D3cold, 1); However, the second call is not necessary if the first one succeeds (the ordering of the statements above doesn't matter here) and it may even be harmful, because we are not supposed to enable PME# after the wake-up power has been enabled for the device. To allow drivers to overcome this problem, introduce function pci_wake_from_d3() that will enable the device to wake up the system from any of D3_hot and D3_cold as long as the wake-up from at least one of them is supported. Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-10-20pci: Use new %pR to print resource rangesBenjamin Herrenschmidt
This converts things in drivers/pci to use %pR to printout the content of a struct resource instead of hand-casted %llx or other variants. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-08-07PCI PM: Export pci_pme_active to driversRafael J. Wysocki
Export pci_pme_active() to drivers, so that they can clear the PME_status bit and disable PME# for their devices without involving ACPI. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28PCI: add D3 power state avoidance quirkAlan Cox
Libata has some hacks to deal with certain controllers going silly in D3 state. The right way to handle this is to keep a PCI device flag for such devices. That can then be generalised for no ATA devices with power problems. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-28PCI: document pci_target_stateJesse Barnes
The empty kdoc was causing warnings, so provide some actual documentation. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-22PCI PM: make more PCI PM core functionality available to driversRafael J. Wysocki
Make more PCI PM core functionality available to drivers * Export pci_pme_capable() so that it can be called directly by drivers (for example, tg3 needs that). * Move the state choosing part of pci_prepare_to_sleep() to a separate function, pci_target_state(), that can be called directly by drivers (for example, tg3 needs that). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-21pci kernel-doc fatal errorRandy Dunlap
Fix kernel-doc comments so that they don't produce errors. Also cut some extraneous copy-paste text. Error(linhead//drivers/pci/pci.c:1133): duplicate section name 'Description' Error(linhead//drivers/pci/pci.c:1189): duplicate section name 'Description' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-14PCI: include linux/pm_wakeup.h for device_set_wakeup_capableStephen Rothwell
drivers/pci/pci.c needs pm_wakeup.h since it uses device_set_wakup_capable(). The latter also needs to be stubbed out for !CONFIG_PM. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-14PCI PM: Fix pci_prepare_to_sleepRafael J. Wysocki
The recently introduced pci_prepare_to_sleep() needs the following fix, because there are systems which are not power manageable by ACPI (ie. ACPI doesn't provide methods to put the device into low power states and back), but require ACPI hooks to be executed for wake-up to work. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07PCI: Simplify PCI device PM codeRafael J. Wysocki
If the offset of PCI device's PM capability in its configuration space, the mask of states that the device supports PME# from and the D1 and D2 support bits are cached in the corresponding struct pci_dev, the PCI device PM code can be simplified quite a bit. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07PCI PM: Introduce pci_prepare_to_sleep and pci_back_from_sleepRafael J. Wysocki
Introduce functions pci_prepare_to_sleep() and pci_back_from_sleep(), to be used by the PCI drivers that want to place their devices into the lowest power state appropiate for them (PCI_D3hot, if the device is not supposed to wake up the system, or the deepest state from which the wake-up is possible, otherwise) while the system is being prepared to go into a sleeping state and to put them back into D0 during the subsequent transition to the working state. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07PCI ACPI: Rework PCI handling of wake-upRafael J. Wysocki
* Introduce function acpi_pm_device_sleep_wake() for enabling and disabling the system wake-up capability of devices that are power manageable by ACPI. * Introduce function acpi_bus_can_wakeup() allowing other (dependent) subsystems to check if ACPI is able to enable the system wake-up capability of given device. * Introduce callback .sleep_wake() in struct pci_platform_pm_ops and for the ACPI PCI 'driver' make it use acpi_pm_device_sleep_wake(). * Introduce callback .can_wakeup() in struct pci_platform_pm_ops and for the ACPI 'driver' make it use acpi_bus_can_wakeup(). * Move the PME# handlig code out of pci_enable_wake() and split it into two functions, pci_pme_capable() and pci_pme_active(), allowing the caller to check if given device is capable of generating PME# from given power state and to enable/disable the device's PME# functionality, respectively. * Modify pci_enable_wake() to use the new ACPI callbacks and the new PME#-related functions. * Drop the generic .platform_enable_wakeup() callback that is not used any more. * Introduce device_set_wakeup_capable() that will set the power.can_wakeup flag of given device. * Rework PCI device PM initialization so that, if given device is capable of generating wake-up events, either natively through the PME# mechanism, or with the help of the platform, its power.can_wakeup flag is set and its power.should_wakeup flag is unset as appropriate. * Make ACPI set the power.can_wakeup flag for devices found to be wake-up capable by it. * Make the ACPI wake-up code enable/disable GPEs for devices that have the wakeup.flags.prepared flag set (which means that their wake-up power has been enabled). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07PCI: rework pci_set_power_state function to call platform firstRafael J. Wysocki
Rework pci_set_power_state() so that the platform callback is invoked before the native mechanism, if necessary. Also, make the function check if the device is power manageable by the platform before invoking the platform callback. This may matter if the device dependent on additional power resources controlled by the platform is being put into D0, in which case those power resources must be turned on before we attempt to handle the device itself. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-07-07PCI: Introduce platform_pci_power_manageable functionRafael J. Wysocki
Introduce function pointer platform_pci_power_manageable to be used by the platform-related code to point to a function allowing us to check if given device is power manageable by the platform. Introduce acpi_pci_power_manageable() playing that role for ACPI. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-25PCI: correct resource number in debug outputJesse Barnes
If pci_request_region fails, make the warning include the resource number, not the resource number + 1.
2008-06-25PCI: use dev_printk when possibleBjorn Helgaas
Convert printks to use dev_printk(). I converted pr_debug() to dev_dbg(). Both use KERN_DEBUG and are enabled only when DEBUG is defined. I converted printk(KERN_DEBUG) to dev_printk(KERN_DEBUG), not to dev_dbg(), because dev_dbg() is only enabled when DEBUG is defined. I converted DBG(KERN_INFO) (only in setup-bus.c) to dev_info(). The DBG() name makes it sound like debug, but it's been enabled forever, so dev_info() preserves the previous behavior. I tried to make the resource assignment formats more consistent, e.g., "BAR %d: got res [%#llx-%#llx] bus [%#llx-%#llx] flags %#lx\n" instead of sometimes using "start-end" and sometimes using "size@start". I'm not attached to one or the other; I'd just like them consistent. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-12Merge branch 'suspend' of ↵Jesse Barnes
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 into linux-next
2008-06-11PCI ACPI: Drop the second argument of platform_pci_choose_stateRafael J. Wysocki
Since the second argument of acpi_pci_choose_state() and platform_pci_choose_state() is never used, remove it. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Len Brown <len.brown@intel.com>
2008-06-10PCI: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-20PCI: replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-04-20PCI: add PCI Express ASPM supportShaohua Li
PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Note: some devices might not work well with aspm, either because chipset issue or device issue. The patch provide API (pci_disable_link_state), driver can disable ASPM for specific device. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-03-24PCI: revert "pcie: utilize pcie transaction pending bit"Andrew Morton
Revert as it is reported to cause problems for people. commit 4348a2dc49f9baecd34a9b0904245488c6189398 Author: Shaohua Li <shaohua.li@intel.com> Date: Wed Oct 24 10:45:08 2007 +0800 pcie: utilize pcie transaction pending bit PCIE has a mechanism to wait for Non-Posted request to complete. I think pci_disable_device is a good place to do this. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Due to the regression reported at http://bugzilla.kernel.org/show_bug.cgi?id=10065 Cc: Shaohua Li <shaohua.li@intel.com> Cc: Soeren Sonnenburg <kernel@nn7.de> Cc: "Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-23PM: Introduce PM_EVENT_HIBERNATE callback stateRafael J. Wysocki
During the last step of hibernation in the "platform" mode (with the help of ACPI) we use the suspend code, including the devices' ->suspend() methods, to prepare the system for entering the ACPI S4 system sleep state. But at least for some devices the operations performed by the ->suspend() callback in that case must be different from its operations during regular suspend. For this reason, introduce the new PM event type PM_EVENT_HIBERNATE and pass it to the device drivers' ->suspend() methods during the last phase of hibernation, so that they can distinguish this case and handle it as appropriate. Modify the drivers that handle PM_EVENT_SUSPEND in a special way and need to handle PM_EVENT_HIBERNATE in the same way. These changes are necessary to fix a hibernation regression related to the i915 driver (ref. http://lkml.org/lkml/2008/2/22/488). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Tested-by: Jeff Chua <jeff.chua.linux@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05iommu sg merging: PCI: add dma segment boundary supportFUJITA Tomonori
This adds PCI's accessor for segment_boundary_mask in device_dma_parameters. The default segment_boundary is set to 0xffffffff, same to the block layer's default value (and the scsi mid layer uses the same value). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Greg KH <greg@kroah.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05iommu sg merging: PCI: add device_dma_parameters supportFUJITA Tomonori
This adds struct device_dma_parameters in struct pci_dev and properly sets up a pointer in struct device. The default max_segment_size is set to 64K, same to the block layer's default value. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Mostly-acked-by: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-02Revert "PCI: PCIE ASPM support"Greg Kroah-Hartman
This reverts commit 6c723d5bd89f03fc3ef627d50f89ade054d2ee3b. It caused build errors on non-x86 platforms, config file confusion, and even some boot errors on some x86-64 boxes. All around, not quite ready for prime-time :( Cc: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-02Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pci-2.6: (64 commits) PCI: make pci_bus a struct device PCI: fix codingstyle issues in include/linux/pci.h PCI: fix codingstyle issues in drivers/pci/pci.h PCI: PCIE ASPM support PCI: Fix fakephp deadlock PCI: modify SB700 SATA MSI quirk PCI: Run ACPI _OSC method on root bridges only PCI ACPI: AER driver should only register PCIe devices with _OSC PCI ACPI: Added a function to register _OSC with only PCIe devices. PCI: constify function pointer tables PCI: Convert drivers/pci/proc.c to use unlocked_ioctl pciehp: block new requests from the device before power off pciehp: workaround against Bad DLLP during power off pciehp: wait for 1000ms before LED operation after power off PCI: Remove pci_enable_device_bars() from documentation PCI: Remove pci_enable_device_bars() PCI: Remove users of pci_enable_device_bars() PCI: Add pci_enable_device_{io,mem} intefaces PCI: avoid save the same type of cap multiple times PCI: correctly initialize a structure for pcie_save_pcix_state() ...
2008-02-01PCI: PCIE ASPM supportShaohua Li
PCI Express ASPM defines a protocol for PCI Express components in the D0 state to reduce Link power by placing their Links into a low power state and instructing the other end of the Link to do likewise. This capability allows hardware-autonomous, dynamic Link power reduction beyond what is achievable by software-only controlled power management. However, The device should be configured by software appropriately. Enabling ASPM will save power, but will introduce device latency. This patch adds ASPM support in Linux. It introduces a global policy for ASPM, a sysfs file /sys/module/pcie_aspm/parameters/policy can control it. The interface can be used as a boot option too. Currently we have below setting: -default, BIOS default setting -powersave, highest power saving mode, enable all available ASPM state and clock power management -performance, highest performance, disable ASPM and clock power management By default, the 'default' policy is used currently. In my test, power difference between powersave mode and performance mode is about 1.3w in a system with 3 PCIE links. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: Remove pci_enable_device_bars()Benjamin Herrenschmidt
Now that all in-tree users are gone, this removes pci_enable_device_bars() completely. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: Add pci_enable_device_{io,mem} intefacesBenjamin Herrenschmidt
The pci_enable_device_bars() interface isn't well suited to PCI because you can't actually enable/disable BARs individually on a device. So for example, if a device has 2 memory BARs 0 and 1, and one of them (let's say 1) has not been successfully allocated by the firmware or the kernel, then enabling memory decoding shouldn't be permitted for the entire device since it will decode whatever random address is still in that BAR 1. So a device must be either fully enabled for IO, for Memory, or for both. Not on a per-BAR basis. This provides two new functions, pci_enable_device_io() and pci_enable_device_mem() to replace pci_enable_device_bars(). The implementation internally builds a BAR mask in order to be able to use existing arch infrastructure. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Acked-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: avoid save the same type of cap multiple timesShaohua Li
Avoid adding the same type of cap multiple times, otherwise we will see dead loop. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: correctly initialize a structure for pcie_save_pcix_state()Shaohua Li
save_state->cap_nr should be correctly set, otherwise we can't find the saved cap at resume. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: fix typo in pci_save_pcix_stateShaohua Li
pci_save/store_state has multiple bugs, which will cause cap can't be saved/restored correctly. Below 3 patches fix them. fix the typo in pci_save_pcix_state Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01pcie: utilize pcie transaction pending bitShaohua Li
PCIE has a mechanism to wait for Non-Posted request to complete. I think pci_disable_device is a good place to do this. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01PCI: make pci_restore_bars() staticAdrian Bunk
This patch makes the needlessly global pci_restore_bars() static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-02-01pci: allow multiple calls to pcim_enable_device()Tejun Heo
There's no reason not to allow multiple calls to pcim_enable_device(). Calls after the first one can simply be noop. All PCI resources will be released when the initial pcim_enable_device() resource is released. This allows more flexibility to managed PCI users. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-14more trivial signedness fixes in driversAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12PCI: Add 'nodomains' boot option, and pci_domains_supported globalJeff Garzik
* Introduce pci_domains_supported global, hardcoded to zero if !CONFIG_PCI_DOMAINS. * Introduce 'nodomains' boot option, which clears pci_domains_supported on platforms that enable it by default (x86, x86-64, and others when they are converted to use this). Signed-off-by: Jeff Garzik <jgarzik@redhat.com> Cc: Andi Kleen <ak@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12pci: implement "pci=noaer"Randy Dunlap
For cases in which CONFIG_PCIEAER=y (such as distro kernels), allow users to disable PCIE Advanced Error Reporting by using "pci=noaer" on the kernel command line. This can be used to work around hardware or (kernel) software problems. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-10-12PCI: is_power_of_2 in drivers/pci/pci.cvignesh babu
Replacing n & (n - 1) for power of 2 check by is_power_of_2(n) Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-08-01pci: rename __pci_reenable_device() to pci_reenable_device()Tejun Heo
Rename __pci_reenable_device() to pci_reenable_device(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-30kernel-doc fixes for PCI and drivers/base/Randy Dunlap
Fix undocumented function parameters in PCI and drivers/base. Warning(linux-2.6.23-rc1//drivers/pci/pci.c:1526): No description found for parameter 'rq' Warning(linux-2.6.23-rc1//drivers/base/firmware_class.c:245): No description found for parameter 'bin_attr' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-25Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: Kconfig: remove CONFIG_ACPI_SLEEP from source ACPI: quiet ACPI Exceptions due to no _PTC or _TSS ACPI: Remove references to ACPI_STATE_S2 from acpi_pm_enter ACPI: Kconfig: always enable CONFIG_ACPI_SLEEP on X86 ACPI: Kconfig: fold /proc/acpi/sleep under CONFIG_ACPI_PROCFS ACPI: Kconfig: CONFIG_ACPI_PROCFS now defaults to N ACPI: autoload modules - Create __mod_acpi_device_table symbol for all ACPI drivers ACPI: autoload modules - Create ACPI alias interface ACPI: autoload modules - ACPICA modifications ACPI: asus-laptop: Fix failure exits ACPI: fix oops due to typo in new throttling code ACPI: ignore _PSx method for hotplugable PCI devices ACPI: Use ACPI methods to select PCI device suspend state ACPI, PNP: hook ACPI D-state to PNP suspend/resume ACPI: Add acpi_pm_device_sleep_state helper routine ACPI: Implement the set_target() callback from pm_ops