aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci/setup-bus.c
AgeCommit message (Collapse)Author
2005-10-23cardbus: limit IO windows to 256 bytesLinus Torvalds
That's what we've always historically done, and bigger windows seem to confuse some cardbus bridges. Or something. Alan reports that this makes the ThinkPad 600x series work properly again: the 4kB IO window for some reason made IDE DMA not work, which makes IDE painfully slow even if it works after DMA timeouts. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-09[PATCH] yenta: share code with PCI coreDominik Brodowski
Share code between setup-bus.c and yenta_socket.c: use the write-out code of resources to the bridge also in yenta_socket.c, as it provides useful debug output. In addition, it fixes the bug that the CPU-centric resource view might need to be transferred to the PCI-centric view: setup-bus.c does that, while yenta-socket.c did not. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-30[PATCH] x86: pci_assign_unassigned_resources() updateIvan Kokshaysky
I had some time to think about PCI assign issues in 2.6.13-rc series. The major problem here is that we call pci_assign_unassigned_resources() way too early - at subsys_initcall level. Therefore we give no chances to ACPI and PnP routines (called at fs_initcall level) to reserve their respective resources properly, as the comments in drivers/pnp/system.c and drivers/acpi/motherboard.c suggest: /** * Reserve motherboard resources after PCI claim BARs, * but before PCI assign resources for uninitialized PCI devices */ So I moved the pci_assign_unassigned_resources() call to pcibios_assign_resources() (fs_initcall), which should hopefully fix a lot of problems and make PCIBIOS_MIN_IO tweaks unnecessary. Other changes: - remove resource assignment code from pcibios_assign_resources(), since it duplicates pci_assign_unassigned_resources() functionality and actually does nothing in 2.6.13; - modify ROM assignment code as per Ben's suggestion: try to use firmware settings by default (if PCI_ASSIGN_ROMS is not set); - set CARDBUS_IO_SIZE back to 4K as it's a wonderful stress test for various setups. Confirmed by Tero Roponen <teanropo@cc.jyu.fi> (who had problems with the 4kB CardBus IO size previously). Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-26Only pre-allocate 256 bytes of cardbio IO rangeLinus Torvalds
It may seem small, but most cards need much less, if any, and this not only makes the code adhere to the comment, it seems to fix a boot-time lockup on a ThinkPad 380XD laptop reported by Tero Roponen <teanropo@cc.jyu.fi> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-29[PATCH] PCI: remove PCI_BRIDGE_CTL_VGA handling from setup-bus.cIvan Kokshaysky
The setup-bus code doesn't work correctly for configurations with more than one display adapter in the same PCI domain. This stuff actually is a leftover of an early 2.4 PCI setup code and apparently it stopped working after some "bridge_ctl" changes. So the best thing we can do is just to remove it and rely on the fact that any firmware *has* to configure VGA port forwarding for the boot display device properly. But then we need to ensure that the bus->bridge_ctl will always contain valid information collected at the probe time, therefore the following change in pci_scan_bridge() is needed. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-06[PATCH] yet another fix for setup-bus.c/x86 mergeIvan Kokshaysky
There is a slight disagreement between setup-bus.c code and traditional x86 PCI setup wrt which recourses are invalid vs resources that are free for further allocations. In particular, in the setup-bus.c, if we failed to allocate some resource, we nullify "start" and "flags" fields, but *not* the "end" one. But x86 pcibios_enable_resources() does the following check: if (!r->start && r->end) { printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); return -EINVAL; which means that the device owning the offending resource cannot be enabled. In particular, this breaks cardbus behind the normal decode p2p bridge - the cardbus code from setup-bus.c requests rather large IO and MEM windows, and if it fails, the socket is completely unavailable. Which is wrong, as the yenta code is capable to allocate smaller windows. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-01[PATCH] PCI: pci_assign_unassigned_resources() on x86Ivan Kokshaysky
- Add sanity check for io[port,mem]_resource in setup-bus.c. These resources look like "free" as they have no parents, but obviously we must not touch them. - In i386.c:pci_allocate_bus_resources(), if a bridge resource cannot be allocated for some reason, then clear its flags. This prevents any child allocations in this range, so the setup-bus code will work with a clean resource sub-tree. - i386.c:pcibios_enable_resources() doesn't enable bridges, as it checks only resources 0-5, which looks like a clear bug to me. I suspect it might break hotplug as well in some cases. From: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi bridge hotadd: Remove hot-plugged devices that could not be ↵Rajesh Shah
allocated resources When hot-plugging an I/O hierarchy that contains many bridges and leaf devices, it's possible that there are not enough resources to start all the device present. If we fail to assign a resource, clear the corresponding value in the pci_dev structure, so other code can take corrective action. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!