aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2009-04-13Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: intel-iommu: Avoid panic() for DRHD at address zero. Intel-IOMMU Alignment Issue in dma_pte_clear_range()
2009-04-10intel-iommu: Avoid panic() for DRHD at address zero.David Woodhouse
If the BIOS does something obviously stupid, like claiming that the registers for the IOMMU are at physical address zero, then print a nasty message and abort, rather than trying to set up the IOMMU and then later panicking. It's becoming more and more obvious that trusting this stuff to the BIOS was a mistake. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-07Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: PCI: pci_slot: grab refcount on slot's bus PCI Hotplug: acpiphp: grab refcount on p2p subordinate bus PCI: allow PCI core hotplug to remove PCI root bus PCI: Fix oops in pci_vpd_truncate PCI: don't corrupt enable_cnt when doing manual resource alignment PCI: annotate pci_rescan_bus as __ref, not __devinit PCI-IOV: fix missing kernel-doc PCI: Setup disabled bridges even if buses are added PCI: SR-IOV quirk for Intel 82576 NIC
2009-04-07dma-mapping: replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32)Yang Hongyang
Replace all DMA_32BIT_MASK macro with DMA_BIT_MASK(32) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07dma-mapping: replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64)Yang Hongyang
Replace all DMA_64BIT_MASK macro with DMA_BIT_MASK(64) Signed-off-by: Yang Hongyang<yanghy@cn.fujitsu.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-07PCI: Fix oops in pci_vpd_truncateAnton Vorontsov
pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might happen: sky2 driver version 1.22 Unable to handle kernel paging request for data at address 0x0000000c Faulting instruction address: 0xc01836fc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01836fc] pci_vpd_truncate+0x38/0x40 LR [c029be18] sky2_probe+0x14c/0x518 Call Trace: [ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable) [ef82be20] [c018a11c] local_pci_probe+0x24/0x34 [ef82be30] [c018a14c] pci_call_probe+0x20/0x30 [ef82be50] [c018a330] __pci_device_probe+0x64/0x78 [ef82be60] [c018a44c] pci_device_probe+0x30/0x58 [ef82be80] [c01aa270] really_probe+0x78/0x1a0 [ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8 [ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c [ef82bef0] [c01aa0b4] driver_attach+0x24/0x34 [ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc [ef82bf20] [c01aa87c] driver_register+0x6c/0x110 [ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c [ef82bf50] [c03782c8] sky2_init_module+0x30/0x40 [ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0 [ef82bfd0] [c0362240] do_initcalls+0x38/0x58 This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so pci_vpd_truncate() is called before late_initcall(pci_sysfs_init), therefore ->attr isn't yet initialized. Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-04-06Intel-IOMMU Alignment Issue in dma_pte_clear_range()Fenghua Yu
This issue was pointed out by Linus. In dma_pte_clear_range() in intel-iommu.c start = PAGE_ALIGN(start); end &= PAGE_MASK; npages = (end - start) / VTD_PAGE_SIZE; In partial page case, start could be bigger than end and npages will be negative. Currently the issue doesn't show up as a real bug in because start and end have been aligned to page boundary already by all callers. So the issue has been hidden. But it is dangerous programming practice. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: drivers/pci/intr_remapping.c: include acpi.h intel-iommu: Fix oops in device_to_iommu() when devices not found. intel-iommu: Handle PCI domains appropriately. intel-iommu: Fix device-to-iommu mapping for PCI-PCI bridges. x2apic/intr-remap: decouple interrupt remapping from x2apic x86, dmar: check if it's initialized before disable queue invalidation intel-iommu: set compatibility format interrupt Intel IOMMU Suspend/Resume Support - Interrupt Remapping Intel IOMMU Suspend/Resume Support - Queued Invalidation Intel IOMMU Suspend/Resume Support - DMAR intel-iommu: Add for_each_iommu() and for_each_active_iommu() macros
2009-04-06drivers/pci/intr_remapping.c: include acpi.hAlexander Beregalov
Fix this build error: drivers/pci/intr_remapping.c: In function 'ir_parse_ioapic_scope': drivers/pci/intr_remapping.c:617: error: invalid use of undefined type 'struct acpi_dmar_hardware_unit' Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06intel-iommu: Fix oops in device_to_iommu() when devices not found.David Woodhouse
It's possible for a device in the drhd->devices[] array to be NULL if it wasn't found at boot time, which means we have to check for that case. Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-06PCI Hotplug: acpiphp: grab refcount on p2p subordinate busAlex Chiang
If a logical hot unplug (remove) is performed on a bridge claimed by acpiphp and then acpiphp is unloaded, we will encounter an oops. This is because acpiphp will access the bridge's subordinate bus, which was released by the user's prior hot unplug. The solution is to grab a reference on the subordinate PCI bus. This will prevent the bus from release until acpiphp is unloaded. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Tested-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Reported-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: allow PCI core hotplug to remove PCI root busAlex Chiang
There is no reason to prevent removal of root bus devices. A subsequent rescan will find them just fine. Reviewed-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: Fix oops in pci_vpd_truncateAnton Vorontsov
pci_vpd_truncate() should check for dev->vpd->attr, otherwise this might happen: sky2 driver version 1.22 Unable to handle kernel paging request for data at address 0x0000000c Faulting instruction address: 0xc01836fc Oops: Kernel access of bad area, sig: 11 [#1] [...] NIP [c01836fc] pci_vpd_truncate+0x38/0x40 LR [c029be18] sky2_probe+0x14c/0x518 Call Trace: [ef82bde0] [c029bda4] sky2_probe+0xd8/0x518 (unreliable) [ef82be20] [c018a11c] local_pci_probe+0x24/0x34 [ef82be30] [c018a14c] pci_call_probe+0x20/0x30 [ef82be50] [c018a330] __pci_device_probe+0x64/0x78 [ef82be60] [c018a44c] pci_device_probe+0x30/0x58 [ef82be80] [c01aa270] really_probe+0x78/0x1a0 [ef82bea0] [c01aa460] __driver_attach+0xa4/0xa8 [ef82bec0] [c01a96ac] bus_for_each_dev+0x60/0x9c [ef82bef0] [c01aa0b4] driver_attach+0x24/0x34 [ef82bf00] [c01a9e08] bus_add_driver+0x12c/0x1cc [ef82bf20] [c01aa87c] driver_register+0x6c/0x110 [ef82bf30] [c018a770] __pci_register_driver+0x4c/0x9c [ef82bf50] [c03782c8] sky2_init_module+0x30/0x40 [ef82bf60] [c0001dbc] do_one_initcall+0x34/0x1a0 [ef82bfd0] [c0362240] do_initcalls+0x38/0x58 This happens with CONFIG_SKY2=y, and "ip=on" kernel command line, so pci_vpd_truncate() is called before late_initcall(pci_sysfs_init), therefore ->attr isn't yet initialized. Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: don't corrupt enable_cnt when doing manual resource alignmentYuji Shimada
This patch fixes breakage of of enable_cnt in quirk_resource_alignment. Currently, quirk_resource_alignment calls pci_disable_device. pci_disable_device decrements enable_cnt, so that enable_cnt becomes -1. The patch disables memory decoding, writing command register directly. So enable_cnt is not broken. Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: annotate pci_rescan_bus as __ref, not __devinitAlex Chiang
pci_rescan_bus was annotated as __devinit, which is wrong, because it will never be part of device initialization. Howevever, we can't simply drop the annotation, because then we get section warnings about calling pci_scan_child_bus (which is correctly marked as __devinit). pci_rescan_bus will only get built when CONFIG_HOTPLUG is set, meaning that __devinit is a nop, so we know that pci_scan_child_bus has not been freed. Annotate as __ref to silence modpost. Signed-off-by: Alex Chiang <achiang@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI-IOV: fix missing kernel-docRandy Dunlap
Fix PCI iov kernel-doc warning: Warning(drivers/pci/iov.c:638): No description found for parameter 'nr_virtfn' Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: Setup disabled bridges even if buses are addedYuji Shimada
This patch sets up disabled bridges even if buses have already been added. pci_assign_unassigned_resources is called after buses are added. pci_assign_unassigned_resources calls pci_bus_assign_resources. pci_bus_assign_resources calls pci_setup_bridge to configure BARs of bridges. Currently pci_setup_bridge returns immediately if the bus have already been added. So pci_assign_unassigned_resources can't configure BARs of bridges that were added in a disabled state; this patch fixes the issue. On logical hot-add, we need to prevent the kernel from re-initializing bridges that have already been initialized. To achieve this, pci_setup_bridge returns immediately if the bridge have already been enabled. We don't need to check whether the specified bus is a root bus or not. pci_setup_bridge is not called on a root bus, because a root bus does not have a bridge. The patch adds a new helper function, pci_is_enabled. I made the function name similar to pci_is_managed. The codes which use enable_cnt directly are changed to use pci_is_enabled. Acked-by: Alex Chiang <achiang@hp.com> Signed-off-by: Yuji Shimada <shimada-yxb@necst.nec.co.jp> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-06PCI: SR-IOV quirk for Intel 82576 NICYu Zhao
If BIOS doesn't allocate resources for the SR-IOV BARs, zero the Flash BAR and program the SR-IOV BARs to use the old Flash Memory Space. Please refer to Intel 82576 Gigabit Ethernet Controller Datasheet section 7.9.2.14.2 for details. http://download.intel.com/design/network/datashts/82576_Datasheet.pdf Signed-off-by: Yu Zhao <yu.zhao@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-04-05Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: (140 commits) ACPI: processor: use .notify method instead of installing handler directly ACPI: button: use .notify method instead of installing handler directly ACPI: support acpi_device_ops .notify methods toshiba-acpi: remove MAINTAINERS entry ACPI: battery: asynchronous init acer-wmi: Update copyright notice & documentation acer-wmi: Cleanup the failure cleanup handling acer-wmi: Blacklist Acer Aspire One video: build fix thinkpad-acpi: rework brightness support thinkpad-acpi: enhanced debugging messages for the fan subdriver thinkpad-acpi: enhanced debugging messages for the hotkey subdriver thinkpad-acpi: enhanced debugging messages for rfkill subdrivers thinkpad-acpi: restrict access to some firmware LEDs thinkpad-acpi: remove HKEY disable functionality thinkpad-acpi: add new debug helpers and warn of deprecated atts thinkpad-acpi: add missing log levels thinkpad-acpi: cleanup debug helpers thinkpad-acpi: documentation cleanup thinkpad-acpi: drop ibm-acpi alias ...
2009-04-05Merge git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumaskLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux-2.6-cpumask: (36 commits) cpumask: remove cpumask allocation from idle_balance, fix numa, cpumask: move numa_node_id default implementation to topology.h, fix cpumask: remove cpumask allocation from idle_balance x86: cpumask: x86 mmio-mod.c use cpumask_var_t for downed_cpus x86: cpumask: update 32-bit APM not to mug current->cpus_allowed x86: microcode: cleanup x86: cpumask: use work_on_cpu in arch/x86/kernel/microcode_core.c cpumask: fix CONFIG_CPUMASK_OFFSTACK=y cpu hotunplug crash numa, cpumask: move numa_node_id default implementation to topology.h cpumask: convert node_to_cpumask_map[] to cpumask_var_t cpumask: remove x86 cpumask_t uses. cpumask: use cpumask_var_t in uv_flush_tlb_others. cpumask: remove cpumask_t assignment from vector_allocation_domain() cpumask: make Xen use the new operators. cpumask: clean up summit's send_IPI functions cpumask: use new cpumask functions throughout x86 x86: unify cpu_callin_mask/cpu_callout_mask/cpu_initialized_mask/cpu_sibling_setup_mask cpumask: convert struct cpuinfo_x86's llc_shared_map to cpumask_var_t cpumask: convert node_to_cpumask_map[] to cpumask_var_t x86: unify 32 and 64-bit node_to_cpumask_map ...
2009-04-05Merge branch 'linus' into releaseLen Brown
Conflicts: arch/x86/kernel/cpu/cpufreq/longhaul.c Signed-off-by: Len Brown <len.brown@intel.com>
2009-04-04intel-iommu: Handle PCI domains appropriately.David Woodhouse
We were comparing {bus,devfn} and assuming that a match meant it was the same device. It doesn't -- the same {bus,devfn} can exist in multiple PCI domains. Include domain number in device identification (and call it 'segment' in most places, because there's already a lot of references to 'domain' which means something else, and this code is infected with ACPI thinking already). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04intel-iommu: Fix device-to-iommu mapping for PCI-PCI bridges.David Woodhouse
When the DMAR table identifies that a PCI-PCI bridge belongs to a given IOMMU, that means that the bridge and all devices behind it should be associated with the IOMMU. Not just the bridge itself. This fixes the device_to_iommu() function accordingly. (It's broken if you have the same PCI bus numbers in multiple domains, but this function was always broken in that way; I'll be dealing with that later). Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04x2apic/intr-remap: decouple interrupt remapping from x2apicHan, Weidong
interrupt remapping must be enabled before enabling x2apic, but interrupt remapping doesn't depend on x2apic, it can be used separately. Enable interrupt remapping in init_dmars even x2apic is not supported. [dwmw2: Update Kconfig accordingly, fix build with INTR_REMAP && !X2APIC] Signed-off-by: Weidong Han <weidong.han@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-04x86, dmar: check if it's initialized before disable queue invalidationHan, Weidong
If queue invalidation is disabled after it's already initialized, dmar_enable_qi won't re-enable it due to iommu->qi is allocated. It may result in system hang when use queue invalidation. Add this check to avoid this case. Signed-off-by: Weidong Han <weidong.han@intel.com> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-03Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (28 commits) trivial: Update my email address trivial: NULL noise: drivers/mtd/tests/mtd_*test.c trivial: NULL noise: drivers/media/dvb/frontends/drx397xD_fw.h trivial: Fix misspelling of "Celsius". trivial: remove unused variable 'path' in alloc_file() trivial: fix a pdlfush -> pdflush typo in comment trivial: jbd header comment typo fix for JBD_PARANOID_IOFAIL trivial: wusb: Storage class should be before const qualifier trivial: drivers/char/bsr.c: Storage class should be before const qualifier trivial: h8300: Storage class should be before const qualifier trivial: fix where cgroup documentation is not correctly referred to trivial: Give the right path in Documentation example trivial: MTD: remove EOL from MODULE_DESCRIPTION trivial: Fix typo in bio_split()'s documentation trivial: PWM: fix of #endif comment trivial: fix typos/grammar errors in Kconfig texts trivial: Fix misspelling of firmware trivial: cgroups: documentation typo and spelling corrections trivial: Update contact info for Jochen Hein trivial: fix typo "resgister" -> "register" ...
2009-04-03intel-iommu: set compatibility format interruptHan, Weidong
When extended interrupt mode (x2apic mode) is not supported in a system, it must set compatibility format interrupt to bypass interrupt remapping, otherwise compatibility format interrupts will be blocked. This will be used when interrupt remapping is enabled while x2apic is not supported. Signed-off-by: Weidong Han <weidong.han@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-03Intel IOMMU Suspend/Resume Support - Interrupt RemappingFenghua Yu
This patch enables suspend/resume for interrupt remapping. During suspend, interrupt remapping is disabled. When resume, interrupt remapping is enabled again. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-03Intel IOMMU Suspend/Resume Support - Queued InvalidationFenghua Yu
This patch supports queued invalidation suspend/resume. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-03Intel IOMMU Suspend/Resume Support - DMARFenghua Yu
This patch implements the suspend and resume feature for Intel IOMMU DMAR. It hooks to kernel suspend and resume interface. When suspend happens, it saves necessary hardware registers. When resume happens, it restores the registers and restarts IOMMU by enabling translation, setting up root entry, and re-enabling queued invalidation. Signed-off-by: Fenghua Yu <fenghua.yu@intel.com> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
2009-04-03Merge git://git.infradead.org/iommu-2.6Linus Torvalds
* git://git.infradead.org/iommu-2.6: intel-iommu: Fix address wrap on 32-bit kernel. intel-iommu: Enable DMAR on 32-bit kernel. intel-iommu: fix PCI device detach from virtual machine intel-iommu: VT-d page table to support snooping control bit iommu: Add domain_has_cap iommu_ops intel-iommu: Snooping control support Fixed trivial conflicts in arch/x86/Kconfig and drivers/pci/intel-iommu.c
2009-04-01Merge branch 'linux-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (88 commits) PCI: fix HT MSI mapping fix PCI: don't enable too much HT MSI mapping x86/PCI: make pci=lastbus=255 work when acpi is on PCI: save and restore PCIe 2.0 registers PCI: update fakephp for bus_id removal PCI: fix kernel oops on bridge removal PCI: fix conflict between SR-IOV and config space sizing powerpc/PCI: include pci.h in powerpc MSI implementation PCI Hotplug: schedule fakephp for feature removal PCI Hotplug: rename legacy_fakephp to fakephp PCI Hotplug: restore fakephp interface with complete reimplementation PCI: Introduce /sys/bus/pci/devices/.../rescan PCI: Introduce /sys/bus/pci/devices/.../remove PCI: Introduce /sys/bus/pci/rescan PCI: Introduce pci_rescan_bus() PCI: do not enable bridges more than once PCI: do not initialize bridges more than once PCI: always scan child buses PCI: pci_scan_slot() returns newly found devices PCI: don't scan existing devices ... Fix trivial append-only conflict in Documentation/feature-removal-schedule.txt
2009-03-31Merge branch 'cpumask-for-linus' of ↵Rusty Russell
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip Conflicts: arch/x86/include/asm/topology.h drivers/oprofile/buffer_sync.c (Both cases: changed in Linus' tree, removed in Ingo's).
2009-03-30Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6: PCI PM: Make pci_prepare_to_sleep() disable wake-up if needed radeonfb: Use __pci_complete_power_transition() PCI PM: Introduce __pci_[start|complete]_power_transition() (rev. 2) PCI PM: Restore config spaces of all devices during early resume PCI PM: Make pci_set_power_state() handle devices with no PM support PCI PM: Put devices into low power states during late suspend (rev. 2) PCI PM: Move pci_restore_standard_config to pci-driver.c PCI PM: Use pci_set_power_state during early resume PCI PM: Consistently use variable name "error" for pm call return values kexec: Change kexec jump code ordering PM: Change hibernation code ordering PM: Change suspend code ordering PM: Rework handling of interrupts during suspend-resume PM: Introduce functions for suspending and resuming device interrupts
2009-03-30Merge branch 'linus' into cpumask-for-linusIngo Molnar
Conflicts: arch/x86/kernel/cpu/common.c
2009-03-30Merge branch 'iommu-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip * 'iommu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip: (60 commits) dma-debug: make memory range checks more consistent dma-debug: warn of unmapping an invalid dma address dma-debug: fix dma_debug_add_bus() definition for !CONFIG_DMA_API_DEBUG dma-debug/x86: register pci bus for dma-debug leak detection dma-debug: add a check dma memory leaks dma-debug: add checks for kernel text and rodata dma-debug: print stacktrace of mapping path on unmap error dma-debug: Documentation update dma-debug: x86 architecture bindings dma-debug: add function to dump dma mappings dma-debug: add checks for sync_single_sg_* dma-debug: add checks for sync_single_range_* dma-debug: add checks for sync_single_* dma-debug: add checking for [alloc|free]_coherent dma-debug: add add checking for map/unmap_sg dma-debug: add checking for map/unmap_page/single dma-debug: add core checking functions dma-debug: add debugfs interface dma-debug: add kernel command line parameters dma-debug: add initialization code ... Fix trivial conflicts due to whitespace changes in arch/x86/kernel/pci-nommu.c
2009-03-30PCI PM: Make pci_prepare_to_sleep() disable wake-up if neededRafael J. Wysocki
If the device is not supposed to wake up the system, ie. when device_may_wakeup(&dev->dev) returns 'false', pci_prepare_to_sleep() should pass 'false' to pci_enable_wake() so that it calls the platform to disable the wake-up capability of the device. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI PM: Introduce __pci_[start|complete]_power_transition() (rev. 2)Rafael J. Wysocki
The radeonfb driver needs to program the device's PMCSR directly due to some quirky hardware it has to handle (see http://bugzilla.kernel.org/show_bug.cgi?id=12846 for details) and after doing that it needs to call the platform (usually ACPI) to finish the power transition of the device. Currently it uses pci_set_power_state() for this purpose, however making a specific assumption about the internal behavior of this function, which has changed recently so that this assumption is no longer satisfied. For this reason, introduce __pci_complete_power_transition() that may be called by the radeonfb driver to complete the power transition of the device. For symmetry, introduce __pci_start_power_transition(). Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI PM: Restore config spaces of all devices during early resumeRafael J. Wysocki
At present the configuration spaces of PCI devices that have no drivers or no PM support in the drivers (either legacy or through a pm object) are not saved during suspend and, consequently, they are not restored during resume. This generally may lead to the state of the system being slightly inconsistent after the resume, so it's better to save and restore the configuration spaces of these devices as well. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI PM: Make pci_set_power_state() handle devices with no PM supportRafael J. Wysocki
There is a problem with PCI devices without any PM support (either native or through the platform) that pci_set_power_state() always returns error code for them, even if they are being put into D0. However, such devices are always in D0, so pci_set_power_state() should return success when attempting to put such a device into D0. It also should update the current_state field for these devices as appropriate. This modification is necessary so that the standard configuration registers of these devices are successfully restored by pci_restore_standard_config() during the "early" phase of resume. In addition, pci_set_power_state() should check the value of current_state before calling the platform to change the power state of the device to avoid doing that unnecessarily. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI PM: Put devices into low power states during late suspend (rev. 2)Rafael J. Wysocki
Once we have allowed timer interrupts to be enabled during the late phase of suspending devices, we are now able to use the generic pci_set_power_state() to put PCI devices into low power states at that time. We can also use some related platform callbacks, like the ones preparing devices for wake-up, during the late suspend. Doing this will allow us to avoid the race condition where a device using shared interrupts is put into a low power state with interrupts enabled and then an interrupt (for another device) comes in and confuses its driver. At the same time, devices that don't support the native PCI PM or that require some additional, platform-specific operations to be carried out to put them into low power states will be handled as appropriate. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI PM: Move pci_restore_standard_config to pci-driver.cRafael J. Wysocki
Move pci_restore_standard_config() from pci.c to pci-driver.c and make it static. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI PM: Use pci_set_power_state during early resumeRafael J. Wysocki
Once we have allowed timer interrupts to be enabled during the early phase of resuming devices, we are now able to use the generic pci_set_power_state() to put PCI devices into D0 at that time. Then, the platform-specific PM code will have a chance to handle devices that don't implement the native PCI PM or that require some additional, platform-specific operations to be carried out to power them up. Also, by doing this we can simplify the code quite a bit. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Ingo Molnar <mingo@elte.hu> Acked-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30PCI PM: Consistently use variable name "error" for pm call return valuesFrans Pop
I noticed two functions use a variable "i" to store the return value of PM function calls while the rest of the file uses "error". As "i" normally indicates a counter of some sort it seems better to keep this consistent. Signed-off-by: Frans Pop <elendil@planet.nl> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
2009-03-30PCI: fix HT MSI mapping fixYinghai Lu
Impact: fix bug This patch reworks the nv_msi_ht_cap_quirk() and will only try to avoid to enable ht_msi on device following that root dev, and don't touch that root dev, but only do that trick with end_device on the chain. Reported-by: Prakash Punnoor <prakash@punnoor.de> Tested-by: Prakash Punnoor <prakash@punnoor.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2009-03-30trivial: Fix misspelling of firmwareNick Andrew
Fix misspelling of firmware. Signed-off-by: Nick Andrew <nick@nick-andrew.net> Signed-off-by: Jiri Kosina <jkosina@suse.cz>
2009-03-28Merge branch 'linus' into core/iommuIngo Molnar
Conflicts: arch/x86/Kconfig
2009-03-28Merge branch 'linus' into x86/coreIngo Molnar
2009-03-27Merge branch 'core/percpu' into percpu-cpumask-x86-for-linus-2Ingo Molnar
Conflicts: arch/parisc/kernel/irq.c arch/x86/include/asm/fixmap_64.h arch/x86/include/asm/setup.h kernel/irq/handle.c Semantic merge: arch/x86/include/asm/fixmap.h Signed-off-by: Ingo Molnar <mingo@elte.hu>
2009-03-26PCI: don't enable too much HT MSI mappingYinghai Lu
Impact: fix bug Prakash reported that his c51-mcp51 system ondie sound card doesn't work MSI but if he hack out the HT-MSI on mcp51, the MSI will work well with sound card. This patch reworks nv_msi_ht_cap_quirk() and will only avoid enabling ht_msi on devices following that root device. Reported-by: Prakash Punnoor <prakash@punnoor.de> Signed-off-by: Yinghai Lu <yinghai@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>