aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2006-11-14[PATCH] revert "PCI: quirk for IBM Dock II cardbus controllers"Andrew Morton
Fix http://bugzilla.kernel.org/show_bug.cgi?id=7264 We need to target this quirk a little more tightly, using the T20 DMI string. Cc: Pavel Kysilka <goldenfish@bsys.cz> Acked-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-13[PATCH] pci: don't try to remove sysfs files before they are setup.David Miller
The PCI sysfs attributes are created after the initial PCI bus scan. With the addition of more return value checking and assertions in the device and sysfs layers we now can get dumps like this on sparc64: [ 20.135032] Call Trace: [ 20.135042] [0000000000537f88] pci_remove_bus_device+0x30/0xc0 [ 20.135076] [000000000078f890] pci_fill_in_pbm_cookies+0x98/0x440 [ 20.135109] [000000000042e828] sabre_scan_bus+0x230/0x400 [ 20.135139] [000000000078c710] pcibios_init+0x58/0xa0 [ 20.135159] [0000000000416f14] init+0x9c/0x2e0 [ 20.135190] [0000000000417a50] kernel_thread+0x38/0x60 [ 20.135211] [0000000000417170] rest_init+0x18/0x40 [ 20.135514] PCI0(PBMB): Bus running at 33MHz It's triggering because removal of the "config" PCI sysfs file for the device fails. On sparc64, after probing the device, we'll delete the PCI device via pci_remove_bus_device() if we cannot find the firmware device tree node corresponding to it. This is fine, but at this point the sysfs files for the PCI device won't be setup yet. So we should not try to do anything in pci_remove_sysfs_dev_files() if pci_sysfs_init() has not run yet. Signed-off-by: David S. Miller <davem@davemloft.net> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] htirq: allow buggy drivers of buggy hardware to write the registersEric W. Biederman
This patch adds a variant of ht_create_irq __ht_create_irq that takes an aditional parameter update that is a function that is called whenever we want to write to a drivers htirq configuration registers. This is needed to support the ipath_iba6110 because it's registers in the proper location are not actually conected to the hardware that controlls interrupt delivery. [bos@serpentine.com: fixes] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Cc: <olson@pathscale.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Bryan O'Sullivan <bryan.osullivan@qlogic.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-08[PATCH] htirq: refactor so we only have one function that writes to the chipEric W. Biederman
This refactoring actually optimizes the code a little by caching the value that we think the device is programmed with instead of reading it back from the hardware. Which simplifies the code a little and should speed things up a bit. This patch introduces the concept of a ht_irq_msg and modifies the architecture read/write routines to update this code. There is a minor consistency fix here as well as x86_64 forgot to initialize the htirq as masked. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Andi Kleen <ak@suse.de> Acked-by: Bryan O'Sullivan <bos@pathscale.com> Cc: <olson@pathscale.com> Cc: Roland Dreier <rolandd@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-11-03PCI: Let PCI_MULTITHREAD_PROBE depend on BROKENAdrian Bunk
PCI_MULTITHREAD_PROBE is an interesting feature, but in its current state it seems to be more of a trap for users who accidentally enable it. This patch lets PCI_MULTITHREAD_PROBE depend on BROKEN for 2.6.19. The intention is to get this patch reversed in -mm as soon as it's in Linus' tree, and reverse it for 2.6.20 or 2.6.21 after the fallout of in-kernel problems PCI_MULTITHREAD_PROBE causes got fixed. (akpm: I get enough bug reports already) Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-27PCI: Remove quirk_via_abnormal_poweroffKarsten Wiese
My K8T800 mobo resumes fine from suspend to ram with and without patch applied against 2.6.18. quirk_via_abnormal_poweroff makes some boards not boot 2.6.18, so IMO patch should go to head, 2.6.18.2 and everywhere "ACPI: ACPICA 20060623" has been applied. Remove quirk_via_abnormal_poweroff Obsoleted by "ACPI: ACPICA 20060623": <snip> Implemented support for "ignored" bits in the ACPI registers. According to the ACPI specification, these bits should be preserved when writing the registers via a read/modify/write cycle. There are 3 bits preserved in this manner: PM1_CONTROL[0] (SCI_EN), PM1_CONTROL[9], and PM1_STATUS[11]. http://bugzilla.kernel.org/show_bug.cgi?id=3691 </snip> Signed-off-by: Karsten Wiese <fzu@wemgehoertderstaat.de> Cc: Bob Moore <robert.moore@intel.com> Cc: "Brown, Len" <len.brown@intel.com> Acked-by: Dave Jones <davej@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-27PCI: reset pci device state to unknown state for resumeShaohua Li
Considering below scenario: 1.Unload a PCI device's driver, the device ->current remains in PCI_D0. 2.Do suspend/resume circle. After that, BIOS puts the device to D3. 3.Reload the device driver. The calling pci_set_power_state in the driver can't change the state to D0, as set_power_state thinks the device is already in D0. A bug is reported at http://bugzilla.kernel.org/show_bug.cgi?id=6024 Pat attached a patch at http://marc.theaimsgroup.com/?l=linux-pci&m=114049761428561&w=2 for this issue, but it's lost. As pci_set_power_state can handle D3 -> D0 correctly (restore config space), I simplified Patrick's patch. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Cc: Patrick Mochel <mochel@digitalimplant.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-27PCI: fix pci_fixup_video as it blows up on sparc64Eiichiro Oiwa
This reverts much of the original pci_fixup_video change and makes it work for all arches that need it. fixed, and tested on x86, x86_64 and IA64 dig. Signed-off-by: Eiichiro Oiwa <eiichiro.oiwa.nm@hitachi.com> Acked-by: David Miller <davem@davemloft.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-27acpiphp: fix latch statusMUNEDA Takahiro
pci_hotplug.h says: * @latch_status: if the latch (if any) is open or closed (1/0) However, acpiphp returns opposite value. This patch fixes this issue. I tested this patch on my ia64 machine that has some apciphp based hotplug slots. Signed-off-by: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-23Revert unintentional and bogus change to drivers/pci/quirks.cLinus Torvalds
In commit 4e8a5201506423e0241202de1349422af4260296 ("[PKT_SCHED] netem: Orphan SKB when adding to queue.") Davem mistakenly also included a temporary diff in his tree that disabled the pci_fixup_video VGA quirk, which broke sparc64. This reverts that part of the commit. Sayeth Davem: "Greg KH has a patch coming to you soon which will move that VGA code back into x86/x86_64/IA64 specific areas and will fix the sparc64 problem properly." Special thanks to Claudio Martins <ctpm@ist.utl.pt> for noticing the error in the first place. Cc: Claudio Martins <ctpm@ist.utl.pt> Cc: David Miller <davem@davemloft.net> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-22[PKT_SCHED] netem: Orphan SKB when adding to queue.David S. Miller
The networking emulator can queue SKBs for a very long time, so if you're using netem on the sender side for large bandwidth/delay product testing, the SKB socket send queue sizes become artificially larger. Correct this by calling skb_orphan() in netem_enqueue(). Signed-off-by: David S. Miller <davem@davemloft.net>
2006-10-20[PATCH] Fix up rpaphp driver for pci hotplug header moveOlaf Hering
Use grep instead of make during interface changes. Signed-off-by: Olaf Hering <olaf@aepfle.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-18PCI Hotplug: move pci_hotplug.h to include/linux/Greg Kroah-Hartman
This makes it possible to build pci hotplug drivers outside of the main kernel tree, and Sam keeps telling me to move local header files to their proper places... Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18change pci hotplug subsystem maintainer to KristenKristen Carlson Accardi
Here's a patch adding me to the maintainers file for the pci hotplug subsystem, as we discussed. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18PCI: optionally sort device lists breadth-firstMatt Domsch
Problem: New Dell PowerEdge servers have 2 embedded ethernet ports, which are labeled NIC1 and NIC2 on the chassis, in the BIOS setup screens, and in the printed documentation. Assuming no other add-in ethernet ports in the system, Linux 2.4 kernels name these eth0 and eth1 respectively. Many people have come to expect this naming. Linux 2.6 kernels name these eth1 and eth0 respectively (backwards from expectations). I also have reports that various Sun and HP servers have similar behavior. Root cause: Linux 2.4 kernels walk the pci_devices list, which happens to be sorted in breadth-first order (or pcbios_find_device order on i386, which most often is breadth-first also). 2.6 kernels have both the pci_devices list and the pci_bus_type.klist_devices list, the latter is what is walked at driver load time to match the pci_id tables; this klist happens to be in depth-first order. On systems where, for physical routing reasons, NIC1 appears on a lower bus number than NIC2, but NIC2's bridge is discovered first in the depth-first ordering, NIC2 will be discovered before NIC1. If the list were sorted breadth-first, NIC1 would be discovered before NIC2. A PowerEdge 1955 system has the following topology which easily exhibits the difference between depth-first and breadth-first device lists. -[0000:00]-+-00.0 Intel Corporation 5000P Chipset Memory Controller Hub +-02.0-[0000:03-08]--+-00.0-[0000:04-07]--+-00.0-[0000:05-06]----00.0-[0000:06]----00.0 Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (labeled NIC2, 2.4 kernel name eth1, 2.6 kernel name eth0) +-1c.0-[0000:01-02]----00.0-[0000:02]----00.0 Broadcom Corporation NetXtreme II BCM5708S Gigabit Ethernet (labeled NIC1, 2.4 kernel name eth0, 2.6 kernel name eth1) Other factors, such as device driver load order and the presence of PCI slots at various points in the bus hierarchy further complicate this problem; I'm not trying to solve those here, just restore the device order, and thus basic behavior, that 2.4 kernels had. Solution: The solution can come in multiple steps. Suggested fix #1: kernel Patch below optionally sorts the two device lists into breadth-first ordering to maintain compatibility with 2.4 kernels. It adds two new command line options: pci=bfsort pci=nobfsort to force the sort order, or not, as you wish. It also adds DMI checks for the specific Dell systems which exhibit "backwards" ordering, to make them "right". Suggested fix #2: udev rules from userland Many people also have the expectation that embedded NICs are always discovered before add-in NICs (which this patch does not try to do). Using the PCI IRQ Routing Table provided by system BIOS, it's easy to determine which PCI devices are embedded, or if add-in, which PCI slot they're in. I'm working on a tool that would allow udev to name ethernet devices in ascending embedded, slot 1 .. slot N order, subsort by PCI bus/dev/fn breadth-first. It'll be possible to use it independent of udev as well for those distributions that don't use udev in their installers. Suggested fix #3: system board routing rules One can constrain the system board layout to put NIC1 ahead of NIC2 regardless of breadth-first or depth-first discovery order. This adds a significant level of complexity to board routing, and may not be possible in all instances (witness the above systems from several major manufacturers). I don't want to encourage this particular train of thought too far, at the expense of not doing #1 or #2 above. Feedback appreciated. Patch tested on a Dell PowerEdge 1955 blade with 2.6.18. You'll also note I took some liberty and temporarily break the klist abstraction to simplify and speed up the sort algorithm. I think that's both safe and appropriate in this instance. Signed-off-by: Matt Domsch <Matt_Domsch@dell.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18cpcihp_generic: prevent loading without "bridge" parameterAkinobu Mita
cpcihp_generic module requires configured "bridge" module parameter. But it can be loaded successfully without that parameter. Because module init call ends up returning positive value. This patch prevents from loading without setting "bridge" module parameter. Signed-off-by: Akinbou Mita <akinobu.mita@gmail.com> Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18pci: Additional search functionsAlan Cox
In order to finish converting to pci_get_* interfaces we need to add a couple of bits of missing functionaility pci_get_bus_and_slot() provides the equivalent to pci_find_slot() (pci_get_slot is already taken as a name for something similar but not the same) pci_get_device_reverse() is the equivalent of pci_find_device_reverse but refcounting Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18PCI: quirks: switch quirks code offender to use pci_get APIAlan Cox
Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18PCI: Improve pci_msi_supported() commentsBrice Goglin
Improve pci_msi_supported() comments. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Grant Grundler <grundler@parisc-linux.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18PCI hotplug: ioremap balanced with iounmapAmol Lad
1. ioremap must be balanced by an iounmap and failing to do so can result in a memory leak. 2. Handle return value correctly Tested (compilation only) with: - allmodconfig Signed-off-by: Amol Lad <amol@verismonetworks.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18shpchp: remove unnecessary cmd_busy member from struct controllerKenji Kaneshige
This patch removes unnecessary cmd_busy member from struct controller. Read command status register instead of using cmd_busy. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18shpchp: fix command completion checkKenji Kaneshige
This patch fixes the problem that shpchp driver could mis-detect command failures if the system was under heavy load. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18pci: Stamp out pci_find_* usage in fakephpAlan Cox
pci_find is not hotplug safe, so it really doesn't want to be in an actual hotplug driver either. Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18PCI: fix pcie_portdrv_restore_config undefined without CONFIG_PM errorZhang, Yanmin
On Thu, 2006-09-28 at 03:42, Olaf Hering wrote: > PCI-Express AER implemetation: pcie_portdrv error handler > > This patch breaks if CONFIG_PM is not enabled, > pcie_portdrv_restore_config() will be undefined. I move the definition of pcie_portdrv_restore_config out of CONFIG_PM. Below patch is against 2.6.18-mm1. Could you try it? Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18PCI: Turn pci_fixup_video into generic for embedded VGAeiichiro.oiwa.nm@hitachi.com
pci_fixup_video turns into generic code because there are many platforms need this fixup for embedded VGA as well as x86. The Video BIOS integrates into System BIOS on a machine has embedded VGA although embedded VGA generally don't have PCI ROM. As a result, embedded VGA need the way that the sysfs rom points to the Video BIOS of System RAM (0xC0000). PCI-to-PCI Bridge Architecture specification describes the condition whether or not PCI ROM forwards VGA compatible memory address. fixup_video suits this specification. Although the Video ROM generally implements in x86 code regardless of platform, some application such as X Window System can run this code by dosemu86. Therefore, pci_fixup_video should turn into generic code. Signed-off-by: Eiichiro Oiwa <eiichiro.oiwa.nm@hitachi.com> Acked-by: Alan Cox <alan@redhat.com> Acked-by: Jesse Barnes <jesse.barnes@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18PCI: add ICH7/8 ACPI/GPIO io resource quirksDaniel Ritz
Signed-off-by: Daniel Ritz <daniel.ritz@gmx.ch> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18PCI: pcie-check-and-return-bus_register-errors fixAndrew Morton
__must_check goes on the declaration, not the definition. Cc: "Randy.Dunlap" <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18PCI: VIA IRQ quirk behaviour changeDaniel Drake
The most recent VIA IRQ quirk changes have broken various VIA devices for some users. We are not able to add these devices to the blacklist as they are also available in PCI-card form, and running the quirk on these devices brings us back to square one (running the VIA quirk on non-VIA boards where the quirk is not needed). This patch, based on suggestions from Sergey Vlasov, implements a scheme similar to but more restrictive than the scheme we had in 2.6.16 and earlier. It runs the quirk on all VIA hardware, but *only* if a VIA southbridge was detected on the system. To further reduce the amount of quirked devices, this patch includes a change suggested by Linus at http://lkml.org/lkml/2005/9/27/113 This ensures that devices bound to non-legacy IO-APIC interrupt lines are not quirked. We have made one change to Linus' suggestion: we do a comparison of ">15" rather than ">=15", as 15 is still in the legacy interrupt range. There is still a downside to this patch: if the user inserts a VIA PCI card into a VIA-based motherboard, in some circumstances the quirk will also run on the VIA PCI card. This corner case is hard to avoid. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18pciehp: Remove unnecessary check in pciehp_ctrl.cEric Sesterhenn
this was spotted by coverity (cid #819). We dereference p_slot earlier in the function, and i found no way it could become NULL anywhere. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18pciehp - add missing lockingKenji Kaneshige
This patch fixes the problem that system will panic if multiple power on/off operations are issued to the same slot in parallel. This problem can be easily reproduced by commands below. # while true; do echo 1 > power; echo 0 > power; done & # while true; do echo 1 > power; echo 0 > power; done & The cause is lack of locking for enable/disable operations. This patch fixes this problem. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18pciehp: fix improper info messagesKenji Kaneshige
The slot number displayed in info messages would cause a confusion because those are displayed in several ways (decimal and hex). Furthermore, those slot number is not same as slot name (directory name). This patch fixes those improper info messages. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-18shpchp: fix shpchp_wait_cmd in pollKenji Kaneshige
This patch fixes the problem that issuing SHPC command in poll mode always fails with the following message. shpchp: Command not completed in 2000 msec Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-10-11[PATCH] HT_IRQ must depend on PCIAdrian Bunk
CONFIG_PCI=n, CONFIG_HT_IRQ=y results in the following compile error: ... LD vmlinux arch/i386/mach-generic/built-in.o: In function `apicid_to_node': summit.c:(.text+0x53): undefined reference to `apicid_2_node' arch/i386/kernel/built-in.o: In function `arch_setup_ht_irq': (.text+0xcf79): undefined reference to `write_ht_irq_low' arch/i386/kernel/built-in.o: In function `arch_setup_ht_irq': (.text+0xcf85): undefined reference to `write_ht_irq_high' arch/i386/kernel/built-in.o: In function `k7nops': alternative.c:(.data+0x1358): undefined reference to `mask_ht_irq' alternative.c:(.data+0x1360): undefined reference to `unmask_ht_irq' make[1]: *** [vmlinux] Error 1 Bug report by Jesper Juhl. Signed-off-by: Adrian Bunk <bunk@stusta.de> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-04[PATCH] htirq: tidy up the htirq codeEric W. Biederman
This moves the declarations for the architecture helpers into include/linux/htirq.h from the generic include/linux/pci.h. Hopefully this will make this distinction clearer. htirq.h is included where it is needed. The dependency on the msi code is fixed and removed. The Makefile is tidied up. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] msi: move the ia64 code into arch/ia64Eric W. Biederman
This is just a few makefile tweaks and some file renames. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] msi: refactor and move the msi irq_chip into the arch codeEric W. Biederman
It turns out msi_ops was simply not enough to abstract the architecture specific details of msi. So I have moved the resposibility of constructing the struct irq_chip to the architectures, and have two architecture specific functions arch_setup_msi_irq, and arch_teardown_msi_irq. For simple architectures those functions can do all of the work. For architectures with platform dependencies they can call into the appropriate platform code. With this msi.c is finally free of assuming you have an apic, and this actually takes less code. The helpers for the architecture specific code are declared in the linux/msi.h to keep them separate from the msi functions used by drivers in linux/pci.h Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] msi: only use a single irq_chip for msi interruptsEric W. Biederman
The logic works like this. Since we no longer track the state logic by hand in msi.c startup and shutdown are no longer needed. By updating msi_set_mask_bit to work on msi devices that do not implement a mask bit we can always call the mask/unmask functions. What we really have are mask and unmask so we use them to implement the .mask and .unmask functions instead of .enable and .disable. By switching to the handle_edge_irq handler we only need an ack function that moves the irq if necessary. Which removes the old end and ack functions and their peculiar logic of sometimes disabling an irq. This removes the reliance on pre genirq irq handling methods. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] msi: simplify msi sanity checks by adding with generic irq codeEric W. Biederman
Currently msi.c is doing sanity checks that make certain before an irq is destroyed it has no more users. By adding irq_has_action I can perform the test is a generic way, instead of relying on a msi specific data structure. By performing the core check in dynamic_irq_cleanup I ensure every user of dynamic irqs has a test present and we don't free resources that are in use. In msi.c this allows me to kill the attrib.state member of msi_desc and all of the assciated code to maintain it. To keep from freeing data structures when irq cleanup code is called to soon changing dyanamic_irq_cleanup is insufficient because there are msi specific data structures that are also not safe to free. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Tony Luck <tony.luck@intel.com> Cc: Andi Kleen <ak@suse.de> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Greg KH <greg@kroah.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] Initial generic hypertransport interrupt supportEric W. Biederman
This patch implements two functions ht_create_irq and ht_destroy_irq for use by drivers. Several other functions are implemented as helpers for arch specific irq_chip handlers. The driver for the card I tested this on isn't yet ready to be merged. However this code is and hypertransport irqs are in use in a few other places in the kernel. Not that any of this will get merged before 2.6.19 Because the ipath-ht400 is slightly out of spec this code will need to be generalized to work there. I think all of the powerpc uses are for a plain interrupt controller in a chipset so support for native hypertransport devices is a little less interesting. However I think this is a half way decent model on how to separate arch specific and generic helper code, and I think this is a functional model of how to get the architecture dependencies out of the msi code. [akpm@osdl.org: Kconfig fix] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg KH <greg@kroah.com> Cc: Andi Kleen <ak@muc.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: msi: only build msi-apic.c on ia64Eric W. Biederman
After the previous changes ia64 is the only architecture useing msi-apic.c [akpm@osdl.org: unbreak MSI on ia64] Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: msi: make the msi code irq based and not vector basedEric W. Biederman
The msi currently allocates irqs backwards. First it allocates a platform dependent routing value for an interrupt the ``vector'' and then it figures out from the vector which irq you are on. For ia64 this is fine. For x86 and x86_64 this is complete nonsense and makes an enourmous mess of the irq handling code and prevents some pretty significant cleanups in the code for handling large numbers of irqs. This patch refactors msi.c to work in terms of irqs and create_irq/destroy_irq for dynamically managing irqs. Hopefully this is finally a version of msi.c that is useful on more than just x86 derivatives. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: msi: simplify the msi irq limit policyEric W. Biederman
Currently we attempt to predict how many irqs we will be able to allocate with msi using pci_vector_resources and some complicated accounting, and then we only allow each device as many irqs as we think are available on average. Only the s2io driver even takes advantage of this feature all other drivers have a fixed number of irqs they need and bail if they can't get them. pci_vector_resources is inaccurate if anyone ever frees an irq. The whole implmentation is racy. The current irq limit policy does not appear to make sense with current drivers. So I have simplified things. We can revisit this we we need a more sophisticated policy. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: msi: refactor the msi_opsEric W. Biederman
The current msi_ops are short sighted in a number of ways, this patch attempts to fix the glaring deficiences. - Report in msi_ops if a 64bit address is needed in the msi message, so we can fail 32bit only msi structures. - Send and receive a full struct msi_msg in both setup and target. This is a little cleaner and allows for architectures that need to modify the data to retarget the msi interrupt to a different cpu. - In target pass in the full cpu mask instead of just the first cpu in case we can make use of the full cpu mask. - Operate in terms of irqs and not vectors, currently there is still a 1-1 relationship but on architectures other than ia64 I expect this will change. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: msi: implement helper functions read_msi_msg and write_msi_msgEric W. Biederman
In support of this I also add a struct msi_msg that captures the the two address and one data field ina typical msi message, and I remember the pos and if the address is 64bit in struct msi_desc. This makes the code a little more readable and easier to maintain, and paves the way to further simplfications. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: msi: make the msi boolean tests return either 0 or 1Eric W. Biederman
This allows the output of the msi tests to be stored directly in a bit field. If you don't do this a value greater than one will be truncated and become 0. Changing true to false with bizare consequences. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] genirq: msi: simplify msi enable and disableEric W. Biederman
The problem. Because the disable routines leave the msi interrupts in all sorts of half enabled states the enable routines become impossible to implement correctly, and almost impossible to understand. Simplifing this allows me to simply kill the buggy reroute_msix_table, and generally makes the code more maintainable. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Rajesh Shah <rajesh.shah@intel.com> Cc: Andi Kleen <ak@muc.de> Cc: "Protasevich, Natalie" <Natalie.Protasevich@UNISYS.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-04[PATCH] fix "PCI: assign ioapic resource at hotplug"Kenji Kaneshige
Roland Dreier wrote: > The change "PCI: assign ioapic resource at hotplug" (commit > 23186279658cea6d42a050400d3e79c56cb459b4 in Linus's tree) makes > networking stop working on my system (SuperMicro H8QC8 with four > dual-core Opteron 885 CPUs). In particular, the on-board NIC stops > working, probably because it gets assigned the wrong IRQ (225 in the > non-working case, 217 in the working case) > > With that patch applied, e1000 doesn't work. Reverting just that > patch (shown below) from Linus's latest tree fixes things for me. > The cause of this problem might be an wrong assumption that the 'start' member of resource structure for ioapic device has non-zero value if the resources are assigned by firmware. The 'start' member of ioapic device seems not to be set even though the resources were actually assigned to ioapic devices by firmware. Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: MUNEDA Takahiro <muneda.takahiro@jp.fujitsu.com> Cc: Satoru Takeuchi <takeuchi_satoru@jp.fujitsu.com> Cc: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-03Still more typo fixesMatt LaPlante
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-10-01[PATCH] PCI quirks updateAlan Cox
This fixes two things Firstly someone mistakenly used "errata" for the singular. This causes Dave Woodhouse to emit diagnostics whenever the string is read, and so should be fixed. Secondly the AMD AGP tunnel has an erratum which causes hangs if you try and do direct PCI to AGP transfers in some cases. We have a flag for PCI/PCI failures but we need a different flag for this really as in this case we don't want to stop PCI/PCI transfers using things like IOAT and the new RAID offload work. I'll post some updates to make proper use of the PCIAGP flag in the media/video drivers to Mauro. Signed-off-by: Alan Cox <alan@redhat.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>