aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2008-06-10PCI: Unhide the SMBus on the Compaq Evo D510Jean Delvare
One more machine with a hidden Intel SMBus. Unhiding it reveals a SMSC EMC6D100 hardware monitoring chip. I have checked that this machine has no ACPI magic touching the SMBus nor the hardware monitoring chip, so this should be safe. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10PCI: eliminate double kfree in intel-iommu initializationJulia Lawall
The destination of goto error also does a kfree(g_iommus), so it is not correct to do one here. This was found using Coccinelle (http://www.emn.fr/x-info/coccinelle/). Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10pciehp: removes redundant NULL write to slot status registerKenji Kaneshige
Cleanup to remove a redundant NULL write to SLOTSTATUS. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10pciehp: fixes typo in dbg_ctrl() in pciehp_hpc.cKenji Kaneshige
Fixup a typo in dbg_ctrl(); it was fetching SLOTSTATUS twice. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10shpchp: check firmware before taking controlKenji Kaneshige
Fix the following problems of shpchp driver about getting hotplug control from firmware. - The shpchp driver must not control the hotplug controller if it fails to get control from the firmware. But current shpchp controls the hotplug controller regardless the result, because it doesn't check the return value of get_hp_hw_control_from_firmware(). - Current shpchp driver doesn't support _OSC. The pciehp driver already have the code for evaluating _OSC and OSHP and shpchp and pciehp can share it. So this patch move that code from pciehp to acpi_pcihp.c. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10pciehp: block signals while waiting for command completionKenji Kaneshige
Since we need to wait for command completion for muximum 1sec, waiting command should not be interrupted by a signal. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10pciehp: evaluate _OSC/OSHP before controller initKenji Kaneshige
Current pciehp evaluates _OSC/OSHP method after some controller initialization is done. So if evaluating _OSC/OSHP is failed, we need to cleanup already initialized data structures or hardware. This clearly is not robust way. With this patch, _OSC/OSHP evaluation is done first. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10pciehp: remove redundant pci_dev initializationKenji Kaneshige
Remove the redundant initialization of pci_dev member of struct controller in pciehp_probe(). It is initialized in pcie_init(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10PCI: implement new suspend/resume callbacksRafael J. Wysocki
Implement new suspend and hibernation callbacks for the PCI bus type. Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10PCI/MSI: skip calling pci_find_capability from msi_set_mask_bitsHidetoshi Seto
The position of MSI capability is already cached in the msi_desc when we enter the msi_set_mask_bits(). Use it instead. Signed-off-by: Hidetoshi Seto <seto.hidetoshi@jp.fujitsu.com> Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10PCI: remove CVS keywordsAdrian Bunk
This patch removes CVS keywords that weren't updated for a long time from comments. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10pci-acpi: formatting cleanups for _OSCKenji Kaneshige
Minor cleanup in pci-acpi.c. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10pci-acpi: remove unused variable in __pci_osc_support_setKenji Kaneshige
The 'retval' variable in __pci_osc_support_set() is no longer used. Remove this unused variable. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10pci-acpi: add flag to indicate query had been doneKenji Kaneshige
Current pci-acpi implementation checks osc_data->support_stat to see if control bits had been already queried. It is not good from the viewpoint of easy understanding. So this patch adds new 'is_queried' flag to indicate query had been done. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10pci-acpi: use local buffer for _OSCKenji Kaneshige
Current pci-acpi implementation uses array in osc_data directly to evaluate _OSC. It needs to save the old data and restore it if _OSC evaluation fails. To make it more robust, we should use local array to evaluate _OSC. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10pci-acpi: remove duplicate code for _OSCKenji Kaneshige
Remove the duplicated code in acpi_query_osc() and acpi_run_osc(). It simplifies the code very much. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Acked-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10PCI: Disable PME during PCI scanZhao Yakui
If a device supports #PME and can generate PME events from D0, we may see superfluous events before a driver is loaded (drivers should only enable PME as needed), preventing suspend from working if the corresponding GPE was enabled. Likewise, if the ACPI device has the _PRW object, the _PSW/_DSW object will be called in order to disable the wakeup functionality. But when it is allowed to wake up the sleeping state, OSPM will enable it again. So we should disable PME in the course of scanning PCI devices and enable it again only when PME events are actually required to be generated from the requested PCI state (for example, D3_hot or D3_cold). It is also safe to disable PME again when the PME is disabled for the PCI devices. Signed-off-by: Zhao Yakui <yakui.zhao@intel.com> Signed-off-by: Li Shaohua <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10Suspend/Resume bug in PCI layer wrt quirksRafael J. Wysocki
Some quirks should be called with interrupt disabled, we can't directly call them in .resume_early. Also the patch introduces pci_fixup_resume_early and pci_fixup_suspend, which matches current device core callbacks (.suspend/.resume_early). TBD: Somebody knows why we need quirk resume should double check if a quirk should be called in resume or resume_early. I changed some per my understanding, but can't make sure I fixed all. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10PCI: Replace deprecated __initcall with device_initcall.Robert P. J. Day
Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-06-10PCI: make {pciehp,shpchp}_slot_with_bus staticAdrian Bunk
This patch makes the needlessly global {pciehp,shpchp}_slot_with_bus static. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-30PCI: fix rpadlpar pci hotplug driver sysfs usageBenjamin Herrenschmidt
When Greg "fixed" the sysfs usage of that driver a while back, he seem to have introduced a bug where the quotes are added around the name of our specific sysfs files, thus breaking the user space tool. This fixes it. Tested DLPAR operations on a POWER6 machine successfully. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-27pciehp: add message about pciehp_slot_with_bus optionKenji Kaneshige
Some (broken?) platform assign the same slot name to multiple hotplug slots. On such system, slot initialization would fail because of name collision. The pciehp driver already have a "slot_with_bus" module option which adds the bus number into the slot name. This patch adds the message about this module option that will be displayed when slot name collision is detected. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-27pci hotplug core: add check of duplicate slot nameKenji Kaneshige
Fix the following errors reported by Jan C. Nordholz in http://bugzilla.kernel.org/show_bug.cgi?id=10751. kobject_add_internal failed for 2 with -EEXIST, don't try to register things with the same name in the same directory. Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3 #1 [<c0266980>] kobject_add_internal+0x140/0x190 [<c0266afd>] kobject_init_and_add+0x2d/0x40 [<c027bc91>] pci_hp_register+0x81/0x2f0 [<c027fd07>] pciehp_probe+0x1a7/0x470 [<c01b3b84>] sysfs_add_one+0x44/0xa0 [<c01b3c1f>] sysfs_addrm_start+0x3f/0xb0 [<c01b497a>] sysfs_create_link+0x8a/0xf0 [<c0279570>] pcie_port_probe_service+0x50/0x80 [<c02e0545>] driver_sysfs_add+0x55/0x70 [<c02e0662>] driver_probe_device+0x82/0x180 [<c02e07cc>] __driver_attach+0x6c/0x70 [<c02dfe0a>] bus_for_each_dev+0x3a/0x60 [<c05db2d0>] pcied_init+0x0/0x80 [<c02e04e6>] driver_attach+0x16/0x20 [<c02e0760>] __driver_attach+0x0/0x70 [<c02e0341>] bus_add_driver+0x1a1/0x220 [<c05db2d0>] pcied_init+0x0/0x80 [<c02e09cd>] driver_register+0x4d/0x120 [<c05db050>] ibm_acpiphp_init+0x0/0x190 [<c0125aab>] printk+0x1b/0x20 [<c05db2d0>] pcied_init+0x0/0x80 [<c05db2de>] pcied_init+0xe/0x80 [<c05c751a>] kernel_init+0x10a/0x300 [<c0120138>] schedule_tail+0x18/0x50 [<c0103b9a>] ret_from_fork+0x6/0x1c [<c05c7410>] kernel_init+0x0/0x300 [<c05c7410>] kernel_init+0x0/0x300 [<c010485b>] kernel_thread_helper+0x7/0x1c ======================= pci_hotplug: Unable to register kobject '2'<3>pciehp: pci_hp_register failed with error -22 Slot with the same name can be registered multiple times if shpchp or pciehp driver is loaded after acpiphp is loaded because ACPI based hotplug driver and Native OS hotplug driver trying to handle the same physical slot. In this case, current pci_hotplug core will call kobject_init_and_add() muliple time with the same name. This is the cause of this problem. To fix this problem, this patch adds the check into pci_hp_register() to see if the slot with the same name. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-27pciehp: move msleep after power offKenji Kaneshige
According to the PCI Express specification, we must wait for at least 1 second after turning power off before taking any action that relies on power having been removed from the slot/adapter. For this, current pciehp wait for 1 second after issuing the power off command in hpc_power_off_slot() function. But waiting for 1 second in hpc_power_off_slot() can make pciehp probing slow-down because pciehp probe code calls hpc_power_off_slot() if the slot is not occupied just in case. We don't need to wait for 1 second at the pciehp probe time because there is no action on that empty slot. So move 1 second wait from hpc_power_off_slot() to the caller of hpc_power_off_slot(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-27pciehp: poll cmd completion if hotplug interrupt is disabledKenji Kaneshige
Fix improper long wait for command completion in pciehp probing. As described in PCI Express specification, software notification is not generated if the command that occurs as a result of a write to the Slot Control register that disables software notification of command completed events. Since pciehp driver doesn't take it into account, such command is issued in pciehp probing, and it causes improper long wait for command completion. This patch changes the pciehp driver to take such command into account. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-27pciehp: fix slow probingKenji Kaneshige
Fix the "pciehp probing slow" problem reported from Jan C. Nordholz in http://bugzilla.kernel.org/show_bug.cgi?id=10751. The command completed bit in Slot Status register applies only to commands issued to control the attention indicator, power indicator, power controller, or electromechanical interlock. However, writes to other parts of the Slot Control register would end up writing to the control fields. Hence, any write to Slot Control register is considered as a command. However, if the controller doesn't support any of attention indicator, power indicator, power controller and electromechanical interlock, command completed bit would not set in writing to Slot Control register. In this case, we should not wait for command completed bit set, otherwise all commands would be considered not completed in timeout seconds (1 sec.). The cause of the problem is pciehp driver didn't take this situation into account. This patch changes pciehp to take it into account. This patch also add the check for "No Command Completed Support" bit in Slot Capability register. If it is set, we should not wait for command completed bit set as well. This problem seems to be revealed by the commit c27fb883dffe11aa4cb35ecea1fa1832ba45d4da that fixed the bug that pciehp did not wait for command completed properly (pciehp just ignored the command completion event). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-27pciehp: fix NULL dereference in interrupt handlerKenji Kaneshige
Fix the following NULL dereference problem reported from Pierre Ossman and Ingo Molnar. pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0 pciehp: pciehp_find_slot: slot (device=0x0) not found BUG: unable to handle kernel NULL pointer dereference at 0000000000000070 IP: [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 PGD 0 Oops: 0000 [1] CPU 0 Modules linked in: Pid: 1, comm: swapper Tainted: G W 2.6.26-rc3-sched-devel.git-00001-g2b99b26-dirty #170 RIP: 0010:[<ffffffff80494a8b>] [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP: 0000:ffff81003f83fbb0 EFLAGS: 00010046 RAX: 0000000000000039 RBX: 0000000000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000046 RBP: ffff81003f83fbd0 R08: 0000000000000001 R09: ffffffff80245103 R10: 0000000000000020 R11: 0000000000000000 R12: ffff81003ea53a30 R13: 0000000000000000 R14: 0000000000000011 R15: ffffffff80495926 FS: 0000000000000000(0000) GS:ffffffff80be7400(0000) knlGS:0000000000000000 CS: 0010 DS: 0018 ES: 0018 CR0: 000000008005003b CR2: 0000000000000070 CR3: 0000000000201000 CR4: 00000000000006a0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400 Process swapper (pid: 1, threadinfo ffff81003f83e000, task ffff81003f840000) Stack: 0000000000000008 ffff81003f83fbf6 ffff81003ea53a30 0000000000000008 ffff81003f83fc10 ffffffff80495ab4 0000000000000011 0000000000000002 0000000000000202 0000000000000202 00000000fffffff4 ffff81003ea53a30 Call Trace: [<ffffffff80495ab4>] pcie_isr+0x18e/0x1bc [<ffffffff80260831>] request_irq+0x106/0x12f [<ffffffff80495fb6>] pcie_init+0x15e/0x6cc [<ffffffff804933a3>] pciehp_probe+0x64/0x541 [<ffffffff8048f4e7>] pcie_port_probe_service+0x4c/0x76 [<ffffffff8054af70>] driver_probe_device+0xd4/0x1f0 [<ffffffff8054b108>] __driver_attach+0x7c/0x7e [<ffffffff8054b08c>] ? __driver_attach+0x0/0x7e [<ffffffff8054a4b6>] bus_for_each_dev+0x53/0x7d [<ffffffff8054ad3c>] driver_attach+0x1c/0x1e [<ffffffff8054a9c2>] bus_add_driver+0xdd/0x25b [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8054b288>] driver_register+0x5f/0x13e [<ffffffff80c09d3d>] ? pcied_init+0x0/0x8b [<ffffffff8048f441>] pcie_port_service_register+0x47/0x49 [<ffffffff80c09d52>] pcied_init+0x15/0x8b [<ffffffff80bf3938>] kernel_init+0x75/0x243 [<ffffffff808639d2>] ? _spin_unlock_irq+0x2b/0x3a [<ffffffff80228d1f>] ? finish_task_switch+0x57/0x9a [<ffffffff8020c258>] child_rip+0xa/0x12 [<ffffffff8020bcec>] ? restore_args+0x0/0x30 [<ffffffff80bf38c3>] ? kernel_init+0x0/0x243 [<ffffffff8020c24e>] ? child_rip+0x0/0x12 Code: 83 80 00 00 00 48 39 f0 75 e1 0f b6 c9 48 c7 c2 00 0e 8d 80 48 c7 c6 8a 60 a6 80 48 c7 c7 10 db a8 80 31 c0 e8 3f 8d d9 ff 31 db <48> 8b 43 70 48 8d 75 ef 48 89 df ff 50 30 80 7d ef 00 74 37 48 RIP [<ffffffff80494a8b>] pciehp_handle_presence_change+0x7e/0x113 RSP <ffff81003f83fbb0> CR2: 0000000000000070 Kernel panic - not syncing: Fatal exception The situation under which it occurs is hw and timing related: it appears to happen on a system that has PCI hotplug hardware but with no active hotplug cards, and another interrupt in the same (shared) IRQ line arrives too early, before the hotplug-slot entry has been set up - as triggered by CONFIG_DEBUG_SHIRQ=y: This patch contains the following two fixes. (1) Clear all events bits in Slot Status register to prevent the pciehp driver from detecting the spurious events that would have been occur before pciehp loading. (2) Add check whether slot initialization had been already done. This is short term fix. We need more structural fixes to install interrupt handler after slot initialization is done. Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-27shpchp: add message about shpchp_slot_with_bus optionKenji Kaneshige
Some (broken?) platform assign the same slot name to multiple hotplug slots. On such system, slot initialization would fail because of name collision. The shpchp driver already have a "slot_with_bus" module option which adds the bus number into the slot name. This patch adds the message about this module option that will be displayed when slot name collision is detected. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-24PCI: use dev_to_node in pci_call_probeYinghai Lu
to make sure get one online node. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-05-21PCI: don't enable ASPM on devices with mixed PCIe/PCI functionsShaohua Li
The Slot 03:00.* of JMicron controller has two functions, but one is PCIE endpoint the other isn't PCIE device, very strange. PCIE spec defines all functions should have the same config for ASPM, so disable ASPM for the whole slot in this case. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-15Clean up 'print_fn_descriptor_symbol()' typesLinus Torvalds
Everybody wants to pass it a function pointer, and in fact, that is what you _must_ pass it for it to make sense (since it knows that ia64 and ppc64 use descriptors for function pointers and fetches the actual address from there). So don't make the argument be a 'unsigned long' and force everybody to add a cast. Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-05-13ACPI/PCI: another multiple _OSC memory leak fixKenji Kaneshige
The acpi_query_osc() function can be called for the ACPI object that doesn't have _OSC method. In this case, acpi_get_osc_data() would allocate a useless memory region. To avoid this, we need to check the existence of _OSC before calling acpi_get_osc_data() in acpi_query_osc(). Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-13PCI: enable nv_msi_ht_cap_quirk for ALi bridgesBjörn Krombholz
This applies the NVidia MSI enabled flag for HT capable devices quirk to ALi bridges as well. As described in more detail in http://bugzilla.kernel.org/show_bug.cgi?id=10667 this is required for my board which is using an nForce 3 250Gb chipset with an ALi M1695 northbridge. It fixes a regression introduced in 2.6.24 that made the internal NIC of the board unusable (MSI initialisation of the NIC but disabled MSI on the northbridge devices. Signed-off-by: Björn Krombholz <fox.box@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-13PCI: Make the intel-iommu_wait_op macro work when jiffies are not runningmark gross
The following patch changes the intel-iommu.c code to use the TSC instead of jiffies for detecting bad DMAR functionality. Some systems with bad bios's have been seen to hang in early boot spinning in the IOMMU_WAIT_IO macro. This patch will replace the infinite loop with a call to panic. Signed-off-by: Mark Gross <mgross@linux.intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-13ACPI/PCI: handle multiple _OSCKenji Kaneshige
The pci_osc_control_set() function can be called for the ACPI object that doesn't have _OSC method. In this case, acpi_get_osc_data() would allocate a useless memory region. To avoid this, we need to check the existence of _OSC before calling acpi_get_osc_data(). Here is a patch to fix this problem in pci_osc_control_set. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-13ACPI/PCI: handle multiple _OSCShaohua Li
There is an IA64 system here which have two pci root bridges with _OSC. One _OSC disables SHPC control bit but the other not. Below patch makes _OSC data per-device instead of one global, otherwise linux takes both root bridges don't support SHPC. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-05-13PCI ACPI: fix uninitialized variable in __pci_osc_support_setKenji Kaneshige
Fix uninitialized variable in __pci_osc_support_set(). If the ACPI namespace doesn't have any device object corresponding to the specified hid, 'retval' in __pci_osc_support_set() is not changed by the acpi_query_osc() callback. Since 'retval' is not initizlized in the current implementation, the contents of 'retval' is undefined in this case. This causes a mis-handling of ctrlset_buf[OSC_SUPPORT_TYPE] and will cause an unexpected result in the subsequent pci_osc_control_set() call as a result. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-29x86/pci: remove flag in pci_cfg_space_size_extYinghai Lu
so let pci_cfg_space_size call it directly without flag. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2008-04-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (21 commits) pciehp: fix error message about getting hotplug control pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2 pci/irq: restore mask_bits in msi shutdown -v3 doc: replace yet another dev with pdev for consistency in DMA-mapping.txt PCI: don't expose struct pci_vpd to userspace doc: fix an incorrect suggestion to pass NULL for PCI like buses Consistently use pdev as the variable of type struct pci_dev *. pciehp: Fix command write shpchp: fix slot name make pciehp_acpi_get_hp_hw_control_from_firmware() pciehp: Clean up pcie_init() pciehp: Mask hotplug interrupt at controller release pciehp: Remove useless hotplug interrupt enabling pciehp: Fix wrong slot capability check pciehp: Fix wrong slot control register access pciehp: Add missing memory barrier pciehp: Fix interrupt event handlig pciehp: fix slot name Update MAINTAINERS with location of PCI tree PCI: Add Intel SCH PCI IDs ...
2008-04-29pciehp: fix error message about getting hotplug controlKenji Kaneshige
People are confused by the following error message that actually is not for indicating a error. Cannot get control of hotplug hardware for pci %s This patch changes this message to debug message. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
2008-04-29pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2Yinghai Lu
[PATCH 2/2] pci/irq: let pci_device_shutdown to call pci_msi_shutdown v2 this change | commit 23a274c8a5adafc74a66f16988776fc7dd6f6e51 | Author: Prakash, Sathya <sathya.prakash@lsi.com> | Date: Fri Mar 7 15:53:21 2008 +0530 | | [SCSI] mpt fusion: Enable MSI by default for SAS controllers | | This patch modifies the driver to enable MSI by default for all SAS chips. | | Signed-off-by: Sathya Prakash <sathya.prakash@lsi.com> | Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> | Causes the kexec of a RHEL 5.1 kernel to fail. root casue: the rhel 5.1 kernel still uses INTx emulation. and mptscsih_shutdown doesn't call pci_disable_msi to reenable INTx on kexec path So call pci_msi_shutdown in the shutdown path to do the same thing to msix Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
2008-04-29pci/irq: restore mask_bits in msi shutdown -v3Yinghai Lu
[PATCH 1/2] pci/irq: restore mask_bits in msi shutdown -v3 Yinghai found that kexec'ing a RHEL 5.1 kernel with 2.6.25-rc3+ kernels prevents his NIC from working. He bisected to | commit 89d694b9dbe769ca1004e01db0ca43964806a611 | Author: Thomas Gleixner <tglx@linutronix.de> | Date: Mon Feb 18 18:25:17 2008 +0100 | | genirq: do not leave interupts enabled on free_irq | | The default_disable() function was changed in commit: | | 76d2160147f43f982dfe881404cfde9fd0a9da21 | genirq: do not mask interrupts by default | For MSI, default_shutdown will call mask_bit for msi device. All mask bits will left disabled after free_irq. Then in the kexec case, the next kernel can only use msi_enable bit, so all device's MSI can not be used. So lets to restore the mask bit to its pci reset defined value (enabled) when we disable the kernels use of msi to be a little friendlier to kexec'd kernels. Extend msi_set_mask_bit to msi_set_mask_bits to take mask, so we can fully restore that to 0x00 instead of 0xfe. Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Jesse Barnes <jbarnes@hobbes.lan>
2008-04-29Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-pci * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86-bigbox-pci: x86: add pci=check_enable_amd_mmconf and dmi check x86: work around io allocation overlap of HT links acpi: get boot_cpu_id as early for k8_scan_nodes x86_64: don't need set default res if only have one root bus x86: double check the multi root bus with fam10h mmconf x86: multi pci root bus with different io resource range, on 64-bit x86: use bus conf in NB conf fun1 to get bus range on, on 64-bit x86: get mp_bus_to_node early x86 pci: remove checking type for mmconfig probe x86: remove unneeded check in mmconf reject driver core: try parent numa_node at first before using default x86: seperate mmconf for fam10h out from setup_64.c x86: if acpi=off, force setting the mmconf for fam10h x86_64: check MSR to get MMCONFIG for AMD Family 10h x86_64: check and enable MMCONFIG for AMD Family 10h x86_64: set cfg_size for AMD Family 10h in case MMCONFIG x86: mmconf enable mcfg early x86: clear pci_mmcfg_virt when mmcfg get rejected x86: validate against acpi motherboard resources Fixed up fairly trivial conflicts in arch/x86/pci/{init.c,pci.h} due to OLPC support manually.
2008-04-29drivers: use non-racy method for proc entries creation (2)Denis V. Lunev
Use proc_create()/proc_create_data() to make sure that ->proc_fops and ->data be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Greg Kroah-Hartman <gregkh@suse.de> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Peter Osterlund <petero2@telia.com> Cc: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Neil Brown <neilb@suse.de> Cc: Mauro Carvalho Chehab <mchehab@infradead.org> Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29proc: remove proc_busAlexey Dobriyan
Remove proc_bus export and variable itself. Using pathnames works fine and is slightly more understandable and greppable. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28drivers: fix integer as NULL pointer warningsHarvey Harrison
Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-26x86: multi pci root bus with different io resource range, on 64-bitYinghai Lu
scan AMD opteron io/mmio routing to make sure every pci root bus get correct resource range. Thus later pci scan could assign correct resource to device with unassigned resource. this can fix a system without _CRS for multi pci root bus. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-26driver core: try parent numa_node at first before using defaultYinghai Lu
in the device_add, we try to use use parent numa_node. need to make sure pci root bus's bridge device numa_node is set. then we could use device->numa_node direclty for all device. and don't need to call pcibus_to_node(). Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-04-26x86_64: set cfg_size for AMD Family 10h in case MMCONFIGYinghai Lu
reuse pci_cfg_space_size but skip check pci express and pci-x CAP ID. Signed-off-by: Yinghai Lu <yinghai.lu@sun.com> Cc: Andrew Morton <akpm@linux-foundation.org> Acked-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-04-25pciehp: Fix command writeKenji Kaneshige
Current implementation of pciehp_write_cmd() always enables command completed interrupt. But pciehp_write_cmd() is also used for clearing command completed interrupt enable bit. In this case, we must not set the command completed interrupt enable bit. To fix this bug, this patch add the check to see if caller wants to change command complete interrupt enable bit. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>