aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2006-07-31[PATCH] pci/search: cleanups, add to kernel-api.tmplRandy Dunlap
Clean up kernel-doc comments in drivers/pci/search.c (line sizes and typos). Enable that source file in DocBook/kernel-api.tmpl. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-12[PATCH] PCI: PCIE power management quirkKristen Carlson Accardi
When changing power states from D0->DX and then from DX->D0, some Intel PCIE chipsets will cause a device reset to occur. This will cause problems for any D State other than D3, since any state information that the driver will expect to be present coming from a D1 or D2 state will have been cleared. This patch addes a flag to the pci_dev structure to indicate that devices should not use states D1 or D2, and will set that flag for the affected chipsets. This patch also modifies pci_set_power_state() so that when a device driver tries to set the power state on a device that is downstream from an affected chipset, or on one of the affected devices it only allows state changes to or from D0 & D3. In addition, this patch allows the delay time between D3->D0 to be changed via a quirk. These chipsets also need additional time to change states beyond the normal 10ms. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] PCI: Clear abnormal poweroff flag on VIA southbridges, fix resumeMatthew Garrett
Some VIA southbridges contain a flag in the ACPI register space that indicates whether an abnormal poweroff has occured, presumably with the intention that it can be cleared on clean shutdown. Some BIOSes check this flag at resume time, and will re-POST the system rather than jump back to the OS if it's set. Clearing it at boot time appears to be sufficient. I'm not sure if drivers/pci/quirks.c is the right place to do it, but I'm not sure where would be cleaner. [akpm@osdl.org: cleanups, build fix] Signed-off-by: Matthew Garrett <mjg59@srcf.ucam.org> Cc: Greg KH <greg@kroah.com> Cc: "Brown, Len" <len.brown@intel.com> Cc: "Yu, Luming" <luming.yu@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-07-12[PATCH] ide: fix Jmicron supportAlan Cox
Prior to 2.6.18rc1 you could install with devices on a JMicron chipset using the "all-generic-ide" option. As of this kernel the AHCI driver grabs the controller and rams it into AHCI mode losing the PATA ports and making CD drives and the like vanish. The all-generic-ide option fails because the AHCI driver grabbed the PCI device and reconfigured it. To fix this three things are needed. #1 We must put the chip into dual function mode #2 The AHCI driver must grab only function 0 (already in your rc1 tree) #3 Something must grab the PATA ports The attached patch is the minimal risk edition of this. It puts the chip into dual function mode so that AHCI will grab the SATA ports without losing the PATA ports. To keep the risk as low as possible the third patch adds the PCI identifiers for the PATA port and the FN check to the ide-generic driver. There is a more featured jmicron driver on its way but that adds risk and the ide-generic support is sufficient to install and run a system. The actual chip setup done by the quirk is the precise setup recommended by the vendor. (The JMB368 appears only in the ide-generic entry as it has no AHCI so does not need the quirk) Signed-off-by: Alan Cox <alan@redhat.com> Acked-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-12[PATCH] msi: Only keep one msi_desc in each slab entry.Eric W. Biederman
It looks like someone confused kmem_cache_create with a different allocator and was attempting to give it knowledge of how many cache entries there were. With the unfortunate result that each slab entry was big enough to hold every irq. Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-12Add PIIX4 APCI quirk for the 440MX chipset tooLinus Torvalds
This is confirmed to fix a hang due to PCI resource conflicts with setting up the Cardbus bridge on old laptops with the 440MX chipsets. Original report by Alessio Sangalli, lspci debugging help by Pekka Enberg, and trial patch suggested by Daniel Ritz: "From the docs available i would _guess_ this thing is really similar to the 82443BX/82371AB combination. at least the SMBus base address register is hidden at the very same place (32bit at 0x90 in function 3 of the "south" brigde)" The dang thing is largely undocumented, but the patch was corroborated by Asit Mallick: "I am trying to find the register information. 440MX is an integration of 440BX north-bridge without AGP and PIIX4E (82371EB). PIIX4 quirk should cover the ACPI and SMBus related I/O registers." and verified to fix the problem by Alessio. Cc: Daniel Ritz <daniel.ritz-ml@swissonline.ch> Cc: Asit Mallick <asit.k.mallick@intel.com> Cc: Pekka Enberg <penberg@cs.helsinki.fi> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Tested-by: Alessio Sangalli <alesan@manoweb.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: ACPI: ACPI_DOCK: Initialize the atomic notifier list ACPI: acpi_os_allocate() fixes ACPI: SBS: fix initialization, sem2mutex ACPI: add 'const' to several ACPI file_operations ACPI: delete some defaults from ACPI Kconfig ACPI: "Device `[%s]' is not power manageable" make message debug only ACPI: ACPI_DOCK Kconfig Revert "Revert "ACPI: dock driver"" ACPI: acpi_os_get_thread_id() returns current ACPI: ACPICA 20060707
2006-07-10[PATCH] pci: initialize struct pci_dev.error_stateLinas Vepstas
The pci channel state is currently uninitialized, thus there are two ways of indicating that "everything's OK": 0 and 1. This is a bit of a burden. If a devce driver wants to check if the pci channel is in a working or a disconnected state, the driver writer must perform checks similar to if((pdev->error_state != 0) && (pdev->error_state != pci_channel_io_normal)) { whatever(); } which is rather akward. The first check is needed because stuct pci_dev is inited to all-zeros. The scond is needed because the error recovery will set the state to pci_channel_io_normal (which is not zero). This patch fixes this awkwardness. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] don't select CONFIG_HOTPLUGAndrew Morton
It's useful to be able to turn off CONFIG_HOTPLUG for compile-coverage testing and for section-checking coverage. But a few things go and select CONFIG_HOTPLUG, making it a royal PITA to turn the thing off. It's only turnable offable if CONFIG_EMBEDDED anyway. So let's make those things depend on HOTPLUG, not select it. Cc: Greg KH <greg@kroah.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-09ACPI: ACPI_DOCK KconfigLen Brown
HOTPLUG_PCI_ACPI depends on ACPI_DOCK ACPI_IBM_DOCK depends on ACPI_DOCK=n ACPI_DOCK is EXPERIMENTAL, though that doesn't seem to mean much Signed-off-by: Len Brown <len.brown@intel.com>
2006-07-02[PATCH] irq-flags: pci: Use the new IRQF_ constantsThomas Gleixner
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: Remove obsolete #include <linux/config.h> remove obsolete swsusp_encrypt arch/arm26/Kconfig typos Documentation/IPMI typos Kconfig: Typos in net/sched/Kconfig v9fs: do not include linux/version.h Documentation/DocBook/mtdnand.tmpl: typo fixes typo fixes: specfic -> specific typo fixes in Documentation/networking/pktgen.txt typo fixes: occuring -> occurring typo fixes: infomation -> information typo fixes: disadvantadge -> disadvantage typo fixes: aquire -> acquire typo fixes: mecanism -> mechanism typo fixes: bandwith -> bandwidth fix a typo in the RTC_CLASS help text smb is no longer maintained Manually merged trivial conflict in arch/um/kernel/vmlinux.lds.S
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-29merge linus into release branchLen Brown
Conflicts: drivers/acpi/acpi_memhotplug.c
2006-06-29Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: [PATCH] i386: export memory more than 4G through /proc/iomem [PATCH] 64bit Resource: finally enable 64bit resource sizes [PATCH] 64bit Resource: convert a few remaining drivers to use resource_size_t where needed [PATCH] 64bit resource: change pnp core to use resource_size_t [PATCH] 64bit resource: change pci core and arch code to use resource_size_t [PATCH] 64bit resource: change resource core to use resource_size_t [PATCH] 64bit resource: introduce resource_size_t for the start and end of struct resource [PATCH] 64bit resource: fix up printks for resources in misc drivers [PATCH] 64bit resource: fix up printks for resources in arch and core code [PATCH] 64bit resource: fix up printks for resources in pcmcia drivers [PATCH] 64bit resource: fix up printks for resources in video drivers [PATCH] 64bit resource: fix up printks for resources in ide drivers [PATCH] 64bit resource: fix up printks for resources in mtd drivers [PATCH] 64bit resource: fix up printks for resources in pci core and hotplug drivers [PATCH] 64bit resource: fix up printks for resources in networks drivers [PATCH] 64bit resource: fix up printks for resources in sound drivers [PATCH] 64bit resource: C99 changes for struct resource declarations Fixed up trivial conflict in drivers/ide/pci/cmd64x.c (the printk that was changed by the 64-bit resources had been deleted in the meantime ;)
2006-06-29[PATCH] genirq: rename desc->handler to desc->chipIngo Molnar
This patch-queue improves the generic IRQ layer to be truly generic, by adding various abstractions and features to it, without impacting existing functionality. While the queue can be best described as "fix and improve everything in the generic IRQ layer that we could think of", and thus it consists of many smaller features and lots of cleanups, the one feature that stands out most is the new 'irq chip' abstraction. The irq-chip abstraction is about describing and coding and IRQ controller driver by mapping its raw hardware capabilities [and quirks, if needed] in a straightforward way, without having to think about "IRQ flow" (level/edge/etc.) type of details. This stands in contrast with the current 'irq-type' model of genirq architectures, which 'mixes' raw hardware capabilities with 'flow' details. The patchset supports both types of irq controller designs at once, and converts i386 and x86_64 to the new irq-chip design. As a bonus side-effect of the irq-chip approach, chained interrupt controllers (master/slave PIC constructs, etc.) are now supported by design as well. The end result of this patchset intends to be simpler architecture-level code and more consolidation between architectures. We reused many bits of code and many concepts from Russell King's ARM IRQ layer, the merging of which was one of the motivations for this patchset. This patch: rename desc->handler to desc->chip. Originally i did not want to do this, because it's a big patch. But having both "desc->handler", "desc->handle_irq" and "action->handler" caused a large degree of confusion and made the code appear alot less clean than it truly is. I have also attempted a dual approach as well by introducing a desc->chip alias - but that just wasnt robust enough and broke frequently. So lets get over with this quickly. The conversion was done automatically via scripts and converts all the code in the kernel. This renaming patch is the first one amongst the patches, so that the remaining patches can stay flexible and can be merged and split up without having some big monolithic patch act as a merge barrier. [akpm@osdl.org: build fix] [akpm@osdl.org: another build fix] Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-28ACPIPHP: prevent duplicate slot numbers when no _SUNKristen Accardi
Dock bridges generally do not implement _SUN, yet show up as ejectable slots. If you have more than one ejectable slot that does not implement SUN, with the current code you will get duplicate slot numbers. So, if there is no _SUN, use the current count of the number of slots found instead. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-28ACPI: static-ize handle_hotplug_event_func()Len Brown
Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-28ACPIPHP: use ACPI dock driverKristen Accardi
Modify the acpiphp driver to use the ACPI dock driver for dock notifications. Only load the acpiphp driver if we find we have pci dock devices. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Len Brown <len.brown@intel.com>
2006-06-27[PATCH] 64bit resource: change pci core and arch code to use resource_size_tGreg Kroah-Hartman
Based on a patch series originally from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-27[PATCH] 64bit resource: fix up printks for resources in pci core and hotplug ↵Greg Kroah-Hartman
drivers This is needed if we wish to change the size of the resource structures. Based on an original patch from Vivek Goyal <vgoyal@in.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-26Merge git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivialLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/bunk/trivial: typo fixes Clean up 'inline is not at beginning' warnings for usb storage Storage class should be first i386: Trivial typo fixes ixj: make ixj_set_tone_off() static spelling fixes fix paniced->panicked typos Spelling fixes for Documentation/atomic_ops.txt move acknowledgment for Mark Adler to CREDITS remove the bouncing email address of David Campbell
2006-06-26[PATCH] x86_64: msi_apic.c build fixChristian Kujau
CC drivers/pci/msi-apic.o In file included from include/asm/msi.h:11, from drivers/pci/msi.h:71, from drivers/pci/msi-apic.c:8: include/asm/smp.h:103: error: syntax error before '->' token akpm: nasty. It appears to be static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask) conflicting with include/asm-x86_64/mach_apic.h's #define cpu_mask_to_apicid (genapic->cpu_mask_to_apicid) And I don't know which patch in rc4-mm1 triggered this. Fixing this in the .c file seems wrong. Including asm/smp.h instead of linux/smp.h seems wrong too. Need that .config. Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-26spelling fixesAndreas Mohr
acquired (aquired) contiguous (contigious) successful (succesful, succesfull) surprise (suprise) whether (weather) some other misspellings Signed-off-by: Andreas Mohr <andi@lisas.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-21[PATCH] PCI: nVidia quirk to make AER PCI-E extended capability visibleBrice Goglin
The nVidia CK804 PCI-E chipset supports the AER extended capability but sometimes fails to link it (with some BIOS or after a warm reboot). It makes the AER cap invisible to pci_find_ext_capability(). The patch adds a quirk to set the missing bit that controls the linking of the capability. By the way, it removes the corresponding code in the myri10ge driver. Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Loic Prylli <loic@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: Bus Parity Status sysfs interfaceDoug Thompson
From: Doug Thompson <norsk5@yahoo.com> This patch adds the 'broken_parity_status' sysfs attribute file to a PCI device. Reading this attribute a userland program can determine if PCI device provides false positives (value of 1) in its generation of PCI Parity status, or not (value of 0). As PCI devices are found to be 'bad' in this regard, userland programs can also set the appropriate value (root access only) of a faulty device. This per device information will be used in the EDAC PCI Parity scanner code in a future patch once this interface becomes available. Signed-off-by: Doug Thompson <norsk5@yahoo.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: MSI-K8T-Neo2-Fir: run only where neededChris Wedgwood
Be more selective when running the MSI-K8T-Neo2Fir soundcard PCI quirk so as not to run this on hardware where it's probably not needed. Signed-off-by: Chris Wedgwood <cw@f00f.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: fix race with pci_walk_bus and pci_destroy_devZhang Yanmin
pci_walk_bus has a race with pci_destroy_dev. When cb is called in pci_walk_bus, pci_destroy_dev might unlink the dev pointed by next. Later on in the next loop, pointer next becomes NULL and cause kernel panic. Below patch against 2.6.17-rc4 fixes it by changing pci_bus_lock (spin_lock) to pci_bus_sem (rw_semaphore). Signed-off-by: Zhang Yanmin <yanmin.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: remove unneeded msi codeGrant Grundler
The code is really not needed. Roland Dreier/Greg KH removed the release_mem_region() calls that were the only consumers of phys_addr: http://www.ussg.iu.edu/hypermail/linux/kernel/0503.0/1540.html patch below deletes the "dead" code. Signed-off-by: Grant Grundler <iod00d@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: don't move ioapics below PCI bridgeKimball Murray
A recent Stratus x86_64 platform uses a system ioapic that is a PCI device located below a PCI bridge. Other platforms like this may exist. This patch fixes a problem wherein the kernel's PCI setup code moves the ioapic to an address other than that assigned by the BIOS. It simply adds another exclusion (which already includes classless devices and host bridges) to the function pbus_assign_resources_sorted so that it will not move the ioapic. If the ioapic is moved, the fixmap mapping to it is broken, so the OS should leave it alone. From: Kimball Murray <kimball.murray@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: cleanup unused variable about msi driverbibo,mao
In IA64 platform, msi driver does not use irq_vector variable, and in x86 platform LAST_DEVICE_VECTOR should one before FIRST_SYSTEM_VECTOR, this patch modify this. Signed-off-by: bibo, mao <bibo.mao@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: disable msi mode in pci_disable_deviceShaohua Li
Brice said the pci_save_msi_state breaks his driver in his special usage (not in suspend/resume), as pci_save_msi_state will disable msi mode. In his usage, pci_save_state will be called at runtime, and later (after the device operates for some time and has an error) pci_restore_state will be called. In another hand, suspend/resume needs disable msi mode, as device should stop working completely. This patch try to workaround this issue. Drivers are expected call pci_disable_device in suspend time after pci_save_state. Signed-off-by: Shaohua Li <shaohua.li@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: Allow MSI to work on kexec kernelRajesh Shah
We recently ran into a problem where the e1000 device failed to work properly on the kexec kernel. MSI was enabled for the device in the main kernel when it crashed. The e1000 driver tried to enable MSI on the kexec kernel, but the code bailed early when it found that MSI was already enabled in the hardware, even though the software state was not properly set up in the kexec'd kernel. This patch fixes the problem by moving the early return to after making sure that the software state is properly initialized. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: AMD 8131 MSI quirk called too late, bus_flags not inherited ?Brice Goglin
The PCI_BUS_FLAGS_NO_MSI bus flags does not appear do be inherited correctly from the amd8131 MSI quirk to its parent busses. It makes devices behind a bridge behind amd8131 try to enable MSI while the amd8131 does not support it. We fix this by looking at flags of all parent busses in pci_enable_msi() and pci_enable_msix(). By the way, also add the missing dev->no_msi check in pci_enable_msix() Signed-off-by: Brice Goglin <brice@myri.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI Bus Parity Status-broken hardware attribute, EDAC foundationDoug Thompson
Currently, the EDAC (error detection and correction) modules that are in the kernel contain some features that need to be moved. After some good feedback on the PCI Parity detection code and interface (http://www.ussg.iu.edu/hypermail/linux/kernel/0603.1/0897.html) this patch ADDs an new attribute to the pci_dev structure: Namely the 'broken_parity_status' bit. When set this indicates that the respective hardware generates false positives of Parity errors. The EDAC "blacklist" solution was inferior and will be removed in a future patch. Also in this patch is a PCI quirk.c entry for an Infiniband PCI-X card which generates false positive parity errors. I am requesting comments on this AND on the possibility of a exposing this 'broken_parity_status' bit to userland via the PCI device sysfs directory for devices. This access would allow for enabling of this feature on new devices and for old devices that have their drivers updated. (SLES 9 SP3 did this on an ATI motherboard video device). There is a need to update such a PCI attribute between kernel releases. This patch just adds a storage place for the attribute and a quirk entry for a known bad PCI device. PCI Parity reaper/harvestor operations are in EDAC itself and will be refactored to use this PCI attribute instead of its own mechanisms (which are currently disabled) in the future. Signed-off-by: Doug Thompson <norsk5@xmission.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI ACPI: Rename the functions to avoid multiple instances.Muthu Kumar
There were two instances of pci_acpi_init(), one in drivers/pci/pci-acpi.c and another in arch/i386/pci/acpi.c. Rename the one in pci-acpi.c and make it consistent with other names in the same file. Signed-off-by: Muthukumar R <muthur@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: don't enable device if already enabledKristen Accardi
If a device is already enabled, don't bother reenabling it. Signed-off-by: Kristen Carlson Accardi <kristen.c.accardi@intel.com> Acked-By: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: Add a "enable" sysfs attribute to the pci devices to allow ↵Arjan van de Ven
userspace (Xorg) to enable devices without doing foul direct access This patch adds an "enable" sysfs attribute to each PCI device. When read it shows the "enabled-ness" of the device, but you can write a "0" into it to disable a device, and a "1" to enable it. This later is needed for X and other cases where userspace wants to enable the BARs on a device (typical example: to run the video bios on a secundary head). Right now X does all this "by hand" via bitbanging, that's just evil. This allows X to no longer do that but to just let the kernel do this. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> CC: Peter Jones <pjones@redhat.com> Acked-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: Add pci_assign_resource_fixed -- allow fixed address assignmentsKumar Gala
PCI: Add pci_assign_resource_fixed -- allow fixed address assignments On some embedded systems the PCI address for hotplug devices are not only known a priori but are required to be at a given PCI address for other master in the system to be able to access. An example of such a system would be an FPGA which is setup from user space after the system has booted. The FPGA may be access by DSPs in the system and those DSPs expect the FPGA at a fixed PCI address. Added pci_assign_resource_fixed() as a way to allow assignment of the PCI devices's BARs at fixed PCI addresses. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: fix to pci ignore pre-set 64-bit bars on 32-bit platformsBjorn Helgaas
When we detect a 64-bit pre-set address in a BAR on a 32-bit platform, we disable it and treat it as if it had been unset, thus allowing the general address assignment code to assign a new address to it when the device is enabled. This can happen either if the firmware assigns 64-bit addresses; additionally, some cards have been found "in the wild" which do not come out of reset with all the BAR registers set to zero. Unfortunately, the patch that implemented this tested the low part of the address instead of the high part of the address. This patch fixes that. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: H. Peter Anvin <hpa@zytor.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: Ignore pre-set 64-bit BARs on 32-bit platformsH. Peter Anvin
[pci] Ignore pre-set 64-bit BARs on 32-bit platforms Currently, Linux always rejects a device which has a pre-set 64-bit address on a 32-bit platform. On systems which do not do PCI initialization in firmware, this causes some devices which don't correctly power up with all BARs zero to fail. This patch makes the kernel automatically zero out such an address (thus treating it as if it had not been set at all, meaning it will assign an address if necessary). I have done this only for devices, not bridges. It seems potentially hazardous to do for bridges. Signed-off-by: H. Peter Anvin <hpa@c2micro.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: altix: msi supportMark Maule
MSI callouts for altix. Involves a fair amount of code reorg in sn irq.c code as well as adding some extensions to the altix PCI provider abstaction. Signed-off-by: Mark Maule <maule@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: per-platform IA64_{FIRST,LAST}_DEVICE_VECTOR definitionsMark Maule
Abstract IA64_FIRST_DEVICE_VECTOR/IA64_LAST_DEVICE_VECTOR since SN platforms use a subset of the IA64 range. Implement this by making the above macros global variables which the platform can override in it setup code. Also add a reserve_irq_vector() routine used by SN to mark a vector's as in-use when that weren't allocated through assign_irq_vector(). Signed-off-by: Mark Maule <maule@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21[PATCH] PCI: msi abstractions and support for altixMark Maule
Abstract portions of the MSI core for platforms that do not use standard APIC interrupt controllers. This is implemented through a new arch-specific msi setup routine, and a set of msi ops which can be set on a per platform basis. Signed-off-by: Mark Maule <maule@sgi.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-21Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/gregkh/pci-2.6: (30 commits) [PATCH] PCI Hotplug: Fix recovery path from errors during pcie_init() [PATCH] PCI Hotplug: fake NULL pointer dereferences in IBM Hot Plug Controller Driver [PATCH] shpchp: Cleanup improper info messages [PATCH] shpchp: Remove Unused hpc_evelnt_lock [PATCH] shpchp: Cleanup interrupt polling timer [PATCH] shpchp: Cleanup SHPC commands [PATCH] shpchp: Cleanup interrupt handler [PATCH] shpchp: Remove unnecessary hpc_ctlr_handle check [PATCH] pciehp: Implement get_address callback [PATCH] pciehp: Add missing pci_dev_put [PATCH] pciehp: Replace pci_find_slot() with pci_get_slot() [PATCH] SGI Hotplug: Incorrect power status [PATCH] shpchp: Create shpchpd at controller probe time [PATCH] shpchp: Mask Global SERR and Intr at controller release time [PATCH] SHPC: Fix SHPC Contoller SERR-INT Register bits access [PATCH] SHPC: Fix SHPC Logical Slot Register bits access [PATCH] SHPC: Cleanup SHPC Logical Slot Register bits access [PATCH] SHPC: Cleanup SHPC Logical Slot Register access [PATCH] SHPC: Cleanup SHPC register access [PATCH] pciehp: Fix programming hotplug parameters ...
2006-06-19[PATCH] PCI Hotplug: Fix recovery path from errors during pcie_init()Jan Beulich
Signed-off-by: Jan Beulich <jbeulich@novell.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] PCI Hotplug: fake NULL pointer dereferences in IBM Hot Plug ↵Eric Sesterhenn
Controller Driver Remove checks for value, since the hotplug core always provides a valid value. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] shpchp: Cleanup improper info messagesKenji Kaneshige
Current SHPCHP driver shows device number of slots in info messages, but it is useless and should be replaced with slot name. This patch replaces the device number shown in the info messages with the slot name. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] shpchp: Remove Unused hpc_evelnt_lockKenji Kaneshige
This patch removes unused hpc_event_lock. This patch has no functional change. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2006-06-19[PATCH] shpchp: Cleanup interrupt polling timerKenji Kaneshige
This patch cleans up the interrupt polling timer code in shpchp_hpc.c. This has no functional changes. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Kristen Accardi <kristen.c.accardi@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>