aboutsummaryrefslogtreecommitdiff
path: root/drivers/pci
AgeCommit message (Collapse)Author
2005-07-11cleanup: remove unnecessary initializer on static pointersGreg Kroah-Hartman
Suggested-by: Greg KH <greg@kroah.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11[ACPI] gut acpi_pci_choose_state() to avoid conflictLen Brown
with pending pm_message_t re-definition. Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11[ACPI] pci_set_power_state() now callsDavid Shaohua Li
platform_pci_set_power_state() and ACPI can answer http://bugzilla.kernel.org/show_bug.cgi?id=4277 Signed-off-by: David Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11[ACPI] PCI can now get suspend state from firmwareDavid Shaohua Li
pci_choose_state() can now call platform_pci_choose_state() and ACPI can answer http://bugzilla.kernel.org/show_bug.cgi?id=4277 Signed-off-by: David Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-11[ACPI] Bind ACPI and PCI devicesDavid Shaohua Li
http://bugzilla.kernel.org/show_bug.cgi?id=4277 Signed-off-by: David Shaohua Li <shaohua.li@intel.com> Signed-off-by: Len Brown <len.brown@intel.com>
2005-07-07[PATCH] pm: more u32 vs. pm_message_t fixesPavel Machek
Few more u32 vs. pm_message_t fixes. Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-07Merge master.kernel.org:/pub/scm/linux/kernel/git/aegl/linux-2.6Linus Torvalds
2005-07-06[PATCH] yet another fix for setup-bus.c/x86 mergeIvan Kokshaysky
There is a slight disagreement between setup-bus.c code and traditional x86 PCI setup wrt which recourses are invalid vs resources that are free for further allocations. In particular, in the setup-bus.c, if we failed to allocate some resource, we nullify "start" and "flags" fields, but *not* the "end" one. But x86 pcibios_enable_resources() does the following check: if (!r->start && r->end) { printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", pci_name(dev)); return -EINVAL; which means that the device owning the offending resource cannot be enabled. In particular, this breaks cardbus behind the normal decode p2p bridge - the cardbus code from setup-bus.c requests rather large IO and MEM windows, and if it fails, the socket is completely unavailable. Which is wrong, as the yenta code is capable to allocate smaller windows. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-06Auto merge with /home/aegl/GIT/linusTony Luck
2005-07-06[IA64] hotplug/ia64: SN Hotplug Driver - SN Hotplug Driver codePrarit Bhargava
This patch is the SGI hotplug driver and additional changes required for the driver. These modifications include changes to the SN io_init.c code for memory management, the inclusion of new SAL calls to enable and disable PCI slots, and a hotplug-style driver. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06[IA64] hotplug/ia64: SN Hotplug Driver - pci_find_next_bus exportPrarit Bhargava
The pci_find_next_bus function is listed as being exported to drivers. It is not EXPORT_SYMBOL'd. Signed-off-by: Prarit Bhargava <prarit@sgi.com> Signed-off-by: Tony Luck <tony.luck@intel.com>
2005-07-06[PATCH] PCI: fix !CONFIG_HOTPLUG pci build problemGreg KH
Here's a patch to fix the build issue when CONFIG_HOTPLUG is not enabled in 2.6.13-rc2. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-01[PATCH] gregkh-pci-pci-assign-unassigned-resources fixAndy Whitcroft
It seems that X86 architectures in general need the setup-bus.o not just those with HOTPLUG. This avoids the following error on X86_NUMAQ and x86_64: arch/i386/pci/built-in.o(.init.text+0x15a6): In function `pcibios_init': : undefined reference to `pci_assign_unassigned_resources' Signed-off-by: Andy Whitcroft <apw@shadowen.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01[PATCH] pci: cleanup argument comments for pci_{save,restore}_stateJohn W. Linville
The buffer arguments have been removed from pci_{save,restore}_state. The comment blocks for those functions should reflect that. Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01[PATCH] PCI: Remove newline from pci MODALIAS variableHannes Reinecke
the pci core sends out a hotplug event variable MODALIAS with a trailing newline. This is inconsistent with all other event variables and breaks some hotplug tools. This patch removes the said newline. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01[PATCH] PCI: acpi tg3 ethernet not coming back properly after S3 suspendon ↵long
DellM70 This patch, is based on kernel 2.6.12, provides a fix for PCIe port bus driver suspend/resume. Signed-off-by: T. Long Nguyen <tom.l.nguyen@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01[PATCH] PCI: Add PCI quirk for SMBus on the Asus P4B-LXJean Delvare
One more Asus motherboard requiring the SMBus quirk (P4B-LX). Original patch from Salah Coronya. Signed-off-by: Salah Coronya <salahx@yahoo.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01[PATCH] PCI: clean up dynamic pci id logicGreg Kroah-Hartman
The dynamic pci id logic has been bothering me for a while, and now that I started to look into how to move some of this to the driver core, I thought it was time to clean it all up. It ends up making the code smaller, and easier to follow, and fixes a few bugs at the same time (dynamic ids were not being matched everywhere, and so could be missed on some call paths for new devices, semaphore not needed to be grabbed when adding a new id and calling the driver core, etc.) I also renamed the function pci_match_device() to pci_match_id() as that's what it really does. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01[PATCH] PCI: pci_assign_unassigned_resources() on x86Ivan Kokshaysky
- Add sanity check for io[port,mem]_resource in setup-bus.c. These resources look like "free" as they have no parents, but obviously we must not touch them. - In i386.c:pci_allocate_bus_resources(), if a bridge resource cannot be allocated for some reason, then clear its flags. This prevents any child allocations in this range, so the setup-bus code will work with a clean resource sub-tree. - i386.c:pcibios_enable_resources() doesn't enable bridges, as it checks only resources 0-5, which looks like a clear bug to me. I suspect it might break hotplug as well in some cases. From: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01[PATCH] PCI: handle subtractive decode pci-pci bridge betterIvan Kokshaysky
With the number of PCI bus resources increased to 8, we can handle the subtractive decode PCI-PCI bridge like a normal bridge, taking into account standard PCI-PCI bridge windows (resources 0-2). This helps to avoid problems with peer-to-peer DMA behind such bridges, poor performance for MMIO ranges outside bridge windows and prefetchable vs. non-prefetchable memory issues. To reflect the fact that such bridges do forward all addresses to the secondary bus (transparency), remaining bus resources 3-7 are linked to resources 0-4 of the primary bus. These resources will be used as fallback by resource management code if allocation from standard bridge windows fails for some reason. Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Acked-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-07-01[PATCH] PCI: Fix up PCI routing in parent bridgeGreg Kroah-Hartman
When the cardbus bridge is behind another bridge change the routing in the parent bridge for new cards. This fixes Cardbus on various AMD64 laptops. Signed-off-by: Andi Kleen <ak@suse.de> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] cpqphp: fix oops during unload without probeKeith Moore
drivers/pci/hotplug/cpqphp_core.c calls cpqphp_event_start_thread() in one_time_init(), which is called whenever the hardware is probed. Unfortunately, cpqphp_event_stop_thread() is *always* called when the module is unloaded. If the hardware is never probed, then cpqphp_event_stop_thread() tries to manipulate a couple of uninitialized mutexes. Signed-off-by: Keith Moore <keithmo@exmsft.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] PCI: clean up the MSI code a bit.Greg Kroah-Hartman
Mostly just cleans up the irq handling logic to be smaller and a bit more descriptive as to what it really does. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] PCI: fix-pci-mmap-on-ppc-and-ppc64.patchMichael Ellerman
This is an updated version of Ben's fix-pci-mmap-on-ppc-and-ppc64.patch which is in 2.6.12-rc4-mm1. It fixes the patch to work on PPC iSeries, removes some debug printks at Ben's request, and incorporates your fix-pci-mmap-on-ppc-and-ppc64-fix.patch also. Originally from Benjamin Herrenschmidt <benh@kernel.crashing.org> This patch was discussed at length on linux-pci and so far, the last iteration of it didn't raise any comment. It's effect is a nop on architecture that don't define the new pci_resource_to_user() callback anyway. It allows architecture like ppc who put weird things inside of PCI resource structures to convert to some different value for user visible ones. It also fixes mmap'ing of IO space on those archs. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] ACPI based I/O APIC hot-plug: acpiphp supportKenji Kaneshige
This patch adds PCI based I/O xAPIC hot-add support to ACPIPHP driver. When PCI root bridge is hot-added, all PCI based I/O xAPICs under the root bridge are hot-added by this patch. Hot-remove support is TBD. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi hotplug: decouple slot power state changes from physical hotplugRajesh Shah
Current acpiphp code does not distinguish between the physical presence and power state of a device/slot. That is, if a device has to be disabled, it also tries to physically ejects the device. This patch decouples power state from physical presence. You can now echo to the corresponding sysfs power control file to repeatedly enable and disable a device without having to physically re-insert it. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi hotplug: aCPI based root bridge hot-addRajesh Shah
acpiphp changes to support acpi based root bridge hot-add. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi hotplug: fix slot power-down problem with acpiphpRajesh Shah
Earlier I reported that Matthew's acpiphp rewrite had problem in powering down slot on my i386 system. The following patch is needed to get the acpiphp rewrite properly powering down the slot. Signed-off-by: Dely Sy <dely.l.sy@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi hotplug: clean up notify handlers on acpiphp unloadRajesh Shah
A root bridge may not have directly attached hotpluggable slots under it. Instead, it may have p2p bridges with slots under it. In this case, we need to clean up the p2p bridges and slots properly too. Patch below applies on top of the original patch, and fixes this problem. Without this, acpiphp leaves behind notify handlers on module unload, and subsequent module load attempts don't work properly too. Patch was tested on an ia64 Tiger4 box. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi hotplug: convert acpiphp to use generic resource codeRajesh Shah
This patch converts acpiphp to use the generic PCI resource assignment code. It's quite large, but most of it is deleting the acpiphp_pci and acpiphp_res files. It's tested on an hp Integrity rx8620 (which won't work without this patch). Testers with other hardware welcomed. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi bridge hotadd: Remove hot-plugged devices that could not be ↵Rajesh Shah
allocated resources When hot-plugging an I/O hierarchy that contains many bridges and leaf devices, it's possible that there are not enough resources to start all the device present. If we fail to assign a resource, clear the corresponding value in the pci_dev structure, so other code can take corrective action. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi bridge hotadd: Make the PCI remove routines safe for failed ↵Rajesh Shah
hot-plug When a root bridge hierarchy is hot-plugged, resource requirements for the new devices may be greater than what the root bridge is decoding. In this case, we want to remove devices that did not get needed resources. These devices have been scanned into bus specific lists but not yet added to the global device list. Make sure the pci remove functions can handle this case. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi bridge hotadd: Link newly created pci child bus to its parent ↵Rajesh Shah
on creation When a pci child bus is created, add it to the parent's children list immediately rather than waiting till pci_bus_add_devices(). For hot-plug bridges/devices, pci_bus_add_devices() may be called much later, after they have been properly configured. In the meantime, this allows us to use the normal pci bus search functions for the hot-plug bridges/buses. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi bridge hotadd: Take the PCI lock when modifying pci bus or ↵Rajesh Shah
device lists With root bridge and pci bridge hot-plug, new buses and devices can be added or removed at run time. Protect the pci bus and device lists with the pci lock when doing so. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi bridge hotadd: Prevent duplicate bus numbers when scanning PCI ↵Rajesh Shah
bridge When hot-plugging a root bridge, as we try to assign bus numbers we may find that the hotplugged hieratchy has more PCI to PCI bridges (i.e. bus requirements) than available. Make sure we don't step over an existing bus when that happens. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-27[PATCH] acpi bridge hotadd: ACPI based root bridge hot-addRajesh Shah
When you hot-plug a (root) bridge hierarchy, it may have p2p bridges and devices attached to it that have not been configured by firmware. In this case, we need to configure the devices before starting them. This patch separates device start from device scan so that we can introduce the configuration step in the middle. I kept the existing semantics for pci_scan_bus() since there are a huge number of callers to that function. Also, I have no way of testing the changes I made to the parisc files, so this needs review by those folks. Sorry for the massive cross-post, this touches files in many different places. Signed-off-by: Rajesh Shah <rajesh.shah@intel.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] PCI: fix show_modalias() function due to attribute changeGreg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Driver Core: drivers/i2c/chips/w83781d.c - ↵Yani Ioannou
drivers/s390/block/dcssblk.c: update device attribute callbacks Signed-off-by: Yani Ioannou <yani.ioannou@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] use device_for_each_child() to properly access child devices.long
On Friday, March 25, 2005 8:47 PM Greg KH wrote: >Here's a fix for pci express. For some reason I don't think they are >using the driver model properly here, but I could be wrong... Thanks for making the changes. However, changes in functions: void pcie_port_device_remove(struct pci_dev *dev) and static int remove_iter(struct device *dev, void *data) are not correct. Please use the patch, which is based on kernel 2.6.12-rc1, below for a fix for these. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] sysfs: (driver/pci) if show/store is missing return -EIODmitry Torokhov
sysfs: fix drivers/pci so if an attribute does not implement show or store method read/write will return -EIO instead of 0. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-20[PATCH] Make attributes names const char *Dmitry Torokhov
sysfs: make attributes and attribute_group's names const char * Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-18[PATCH] Fix typo in drivers/pci/pci-driver.cMika Kukkonen
The git commit 794f5bfa77955c4455f6d72d8b0e2bee25f1ff0c accidentally suffers from a previous typo in that file (',' instead of ';' in end of line). Patch included. Signed-off-by: Mika Kukkonen (mikukkon@iki.fi) Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-17[PATCH] PCI: don't override drv->shutdown unconditionallyChristoph Hellwig
There are many drivers that have been setting the generic driver model level shutdown callback, and pci thus must not override it. Without this patch we can have really bad data loss on various raid controllers. Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-13[PATCH] Fix PCI BAR size interpretation on 64-bit archesOlof Johansson
On 64-bit machines, PCI_BASE_ADDRESS_MEM_MASK and other mask constants passed to pci_size() are 64-bit (for example ~0x0fUL). However, pci_size does comparisons between the u32 arguments and the mask, which will fail even though any result from pci_size is still just 32-bit. Changing the mask argument to u32 seems the obvious thing to do, since all arithmetic in the function is 32-bit and having a larger mask makes no sense. This triggered on a PPC64 system here where an adapter (VGA, as it happened) had a memory region base of 0xfe000000 and a sz of the same, matching the if (max == maxbase ...) test at the bottom of pci_size but failing the mask comparison. Quite a corner case which I guess explains why we haven't seen it until now. Signed-off-by: Olof Johansson <olof@lixom.net> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-09[PATCH] PCI: MSI functionality broken on Serverworks GC chipsetNarendra Sankar
MSI functionality is broken on the GC_LE x86 chipset that Serverworks developed and that is being used in various platforms today. Broadcom is going to push out to the kernel MSI enabled Gigabit drivers (in the very near future), and we would like to make sure that MSI does not get enabled on any platforms using the GC_LE chipset (device id 0x17). Following the AMD 8131 example, I am including a patch to disable MSI functionality when a GCNB_LE is detected. Please let me know if there are any issues with this. This is a permanent fix for this chipset, as the hardware will not be updated. Signed-off-by: Narendra Sankar <nsankar@broadcom.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-09[PATCH] PCI Hotplug: fix CPCI reference counting bugScott Murray
Here's a patch that fixes up the pci_dev refcounting in the CPCI code. I've done some testing against it and it seems fine here. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-06-07[PATCH] PCI: do VIA IRQ fixup always, not just in PIC modeBjorn Helgaas
At least some VIA chipsets require the fixup even in IO-APIC mode. This was found and debugged with the patient assistance of Stian Jordet <liste@jordet.nu> on an Asus CUV266-DLS motherboard. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-06-06[TG3]: Update pci.ids for BCM5752John W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2005-05-31[PATCH] PCI Hotplug: more CPCI updatesScott Murray
Here is my third attempt at a patch to further update the CompactPCI hotplug driver infrastructure to address the pci_enable_device issue discussed on the list as well as a few other issues I discovered during some more testing. This version addresses a few more issues pointed out by Prarit Bhargava. Changes include: - cpci_enable_device and its recursive calling of pci_enable_device on new devices removed. - Use list_rwsem to avoid slot status change races between disable_slot and check_slots. - Fixed oopsing in cpci_hp_unregister_bus caused by calling list_del on a slot after calling pci_hp_deregister. - Removed kfree calls in cleanup_slots since release_slot will have done it already. - Reworked init_slots a bit to fix latch and adapter file updating on subsequent calls to cpci_hp_start. - Improved sanity checking in cpci_hp_register_controller. - Now shut things down correctly in cpci_hotplug_exit. - Switch to pci_get_slot instead of deprecated pci_find_slot. - A bunch of CodingStyle fixes. Signed-off-by: Scott Murray <scottm@somanetworks.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-05-31[PATCH] PCI Hotplug: SHPCHP driver doesn't enable PERR and SERR properlyKenji Kaneshige
Current shpchp driver doesn't seem to program command register to enable PERR and SERR properly. The following patch fixes this issue. Signed-off-by: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>