aboutsummaryrefslogtreecommitdiff
path: root/drivers/pcmcia
AgeCommit message (Collapse)Author
2010-05-07Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix compilation after 16bit state locking changes pcmcia: order userspace suspend and resume requests pcmcia: avoid pccard_validate_cis failure in resume callpath
2010-05-04pcmcia: fix compilation after 16bit state locking changesMarc Zyngier
Commit 04de0816 (pcmcia: pcmcia_dev_present bugfix) broke the deprecated ioctl layer. Fix it by getting rid of references to unexisting fields. Signed-off-by: Marc Zyngier <maz@misterjones.org> Reported-by: Pavel Machek <pavel@ucw.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-04pcmcia: order userspace suspend and resume requestsDominik Brodowski
Assert that userspace suspend and resume requests appearing (almost) immediately are executed in the following order: suspend, resume. This should result in "pccardctl reset" behaving the same as before. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-05-03pcmcia: avoid pccard_validate_cis failure in resume callpathDominik Brodowski
If the PCMCIA CIS changed before a resume event (e.g. due to a card exchange while being suspended, possibly also during a call to "pccardctl reset"), also set the function count to zero so that the subsequent call to pccard_validate_cis() does not fail. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-30MIPS: DB1200: PCMCIA card detection must not be auto-enabled.Manuel Lauss
Same issues as SD card detection: One of both is always triggering and the handlers take care to shut it up and enable the other. To avoid messages about "unbalanced interrupt enable/disable" they must not be automatically enabled when initally requested. This was not an issue with the db1200_defconfig due to fortunate timings; on a build without network chip support the warnings appear. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: http://patchwork.linux-mips.org/patch/1133/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-04-26pcmcia: fix matching rules for pseudo-multi-function cardsAlexander Kurz
Prevent PCMCIA_DEV_ID_MATCH_FUNC_ID from grabbing PFC-cards: I changed the code, so that the first matching struct pcmcia_device_id _PFC_ entry will mark the card has_pfc, preventing PCMCIA_DEV_ID_MATCH_FUNC_ID to match. [linux-pcmcia@lists.infradead.org: re-order commit message] Signed-off-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-21pcmcia: pcmcia_dev_present bugfixDominik Brodowski
pcmcia_dev_present is in and by itself buggy. Add a note specifying why it is broken, and replace the broken locking -- taking a mutex is a bad idea in IRQ context, from which this function is rarely called -- by an atomic_t. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-17drivers/pcmcia: Add missing local_irq_restoreJulia Lawall
Use local_irq_restore in this error-handling case just like in the one just below. A simplified version of the semantic patch that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r exists@ expression E1; identifier f; @@ f (...) { <+... * local_irq_save (E1,...); ... when != E1 * return ...; ...+> } // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-17pcmcia: avoid late calls to pccard_validate_cisDominik Brodowski
pccard_validate_cis() nowadays destroys the CIS cache. Therefore, calling it after card setup should be avoided. We can't control the deprecated PCMCIA ioctl (which is only used on ARM nowadays), but we can avoid -- and report -- any other calls. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-15pcmcia: fix ioport size calculation in rsrc_nonstaticDominik Brodowski
Size needs to be calculated after manipulating with the start value. Reported-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-11pcmcia: re-start on MFC overrideDominik Brodowski
If there are changes to the number of socket devices, we need to start over in all cases: else pcmcia_request_configuration() might get confused. Reported-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-11pcmcia: fix io_probe due to parent (PCI) resourcesDominik Brodowski
Similar to commit 7a96e87d, we need to be aware of any parent PCI device when requesting IO regions, even only for testing ("probing"). Reported-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-11pcmcia: use previously assigned IRQ for all card functionsDominik Brodowski
Use a previously assigned IRQ for all card functions, not only if CONFIG_PCMCIA_PROBE is set. Reported-by: Alexander Kurz <linux@kbdbabel.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-04-06Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix up alignf issues
2010-04-04pcmcia: fix up alignf issuesDominik Brodowski
- pcmcia_align() used a "start" variable twice. That's obviously a bad idea. - pcmcia_common_resource() needs the current "start" parameter being passed, instead of res->start. - pcmcia_common_resource() doesn't use the size and align parameters, so get rid of those. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-30include cleanup: Update gfp.h and slab.h includes to prepare for breaking ↵Tejun Heo
implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: Tejun Heo <tj@kernel.org> Guess-its-ok-by: Christoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
2010-03-26Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6 * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: x86/PCI: truncate _CRS windows with _LEN > _MAX - _MIN + 1 x86/PCI: for host bridge address space collisions, show conflicting resource frv/PCI: remove redundant warnings x86/PCI: remove redundant warnings PCI: don't say we claimed a resource if we failed PCI quirk: Disable MSI on VIA K8T890 systems PCI quirk: RS780/RS880: work around missing MSI initialization PCI quirk: only apply CX700 PCI bus parking quirk if external VT6212L is present PCI: complain about devices that seem to be broken PCI: print resources consistently with %pR PCI: make disabled window printk style match the enabled ones PCI: break out primary/secondary/subordinate for readability PCI: for address space collisions, show conflicting resource resources: add interfaces that return conflict information PCI: cleanup error return for pcix get and set mmrbc functions PCI: fix access of PCI_X_CMD by pcix get and set mmrbc functions PCI: kill off pci_register_set_vga_state() symbol export. PCI: fix return value from pcix_get_max_mmrbc()
2010-03-24PCI: print resources consistently with %pRBjorn Helgaas
No functional change; just print resources in the conventional style. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-03-24pcmcia: use dev_pm_ops for class pcmcia_socket_classDominik Brodowski
Instead of requiring PCMCIA socket drivers to call various functions during their (bus) resume and suspend functions, register an own dev_pm_ops for this class. This fixes several suspend/resume bugs seen on db1xxx-ss, and probably on some other socket drivers, too. With regard to the asymmetry with only _noirq suspend, but split up resume, please see bug 14334 and commit 9905d1b411946fb3 . Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-24pcmcia: allow for four multifunction subdevices (again)Dominik Brodowski
Commit aa584ca4 broke what 6cf5be51 had already fixed: there may be four multifunction devices, but just two pseudo-multifunction devices per PCMCIA card. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-23pcmcia: do not use ioports < 0x100 on x86Dominik Brodowski
On x86 systems using ACPI _CRS information -- now the default for post-2008 systems -- the PCI root bus no longer pretends to be offering the root ioport_resource. To avoid accidentally hitting some platform / system device, use only I/O ports >= 0x100 for PCMCIA devices on x86. Reported-by: Komuro <komurojun-mbn@nifty.com> CC: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-23pd6729: Coding Style fixesKomuro
Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-16PCMCIA: resource, fix lock imbalanceJiri Slaby
Stanse found that one error path (when alloc_skb fails) in netdev_tx omits to unlock hw_priv->hwlock. Fix that by moving away from unlock in each fail path. Unlock at one place instead. Introduced in 94a819f80297e1f635a7cde4ed5317612e512ba7 (pcmcia: assert locking to struct pcmcia_device) Signed-off-by: Jiri Slaby <jslaby@suse.cz> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-15pcmcia: re-route Cardbus IRQ to ISA on ti1130 bridges if necessaryJens Künzer
As the PCI irq pin of the ti1130 pcmcia bridge is not connected (at least on some old IBM Thinkpad 760ED notebooks), the Cardbus IRQ has to be routed to an ISA irq. Part 3 of a series to allow the ISA irq to be used for Cardbus devices if the socket's PCI irq is unusable. [linux@dominikbrodowski.net: split up the original patch, commit message, cleanup] Signed-off-by: Jens Kuenzer <Jens.Kuenzer@fpga.homeip.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-15pcmcia: allow for cb_irq to differ from pci_dev's irq in yenta_socketJens Künzer
cb_irq is presumed to be the same as the pci_dev's irq. This won't be true any more as soon as we allow the ISA irq to be used for Cardbus devices. Therefore, use the pci_dev's irq explicitely whenever we care about it. Part 2 of a series to allow the ISA irq to be used for Cardbus devices if the socket's PCI irq is unusable. [linux@dominikbrodowski.net: split up the original patch, commit message] Signed-off-by: Jens Kuenzer <Jens.Kuenzer@fpga.homeip.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-15pcmcia: honor saved flags in yenta_socket's I365_CSCINT registerJens Künzer
Instead of overwriting the I365_CSCINT register, save the old value and merely change the bits we care about. Part 1 of a series to allow the ISA irq to be used for Cardbus devices if the socket's PCI irq is unusable. [linux@dominikbrodowski.net: split up the original patch, commit message] Signed-off-by: Jens Kuenzer <Jens.Kuenzer@fpga.homeip.net> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-15pcmcia: revert "irq probe can be done without risking an IRQ storm"Dominik Brodowski
This reverts commit 635416ef393e8cec5a89fc6c1de710ee9596a51e. The argument passed to request_irq() only affects action->flags (IRQF_*), but IRQ_NOAUTOEN relates to desc->status. Reported-by: Jan Beulich <JBeulich@novell.com> CC: Alan Cox <alan@linux.intel.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-15pcmcia: pd6729, i82092: use parent (PCI) resourcesDominik Brodowski
A newly added parent resource entry for the root PCI bus, such as 40000000-ffffffff : PCI Bus #00 means that the pd6729 and i82092 drivers cannot allocate iomem as freely as before, unless they do so as PCI devices. Therefore, set socket->cb_dev so that rsrc_nonstatic.c does the right thing. Reported-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-15pcmcia/vrc4171: use local spinlock for device local lock.Yoichi Yuasa
struct pcmcia_socket lock had been used before. Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-12Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm: (370 commits) ARM: S3C2443: Add set_rate and round_rate calls for armdiv clock ARM: S3C2443: Remove #if 0 for clk_mpll ARM: S3C2443: Update notes on MPLLREF clock ARM: S3C2443: Further clksrc-clk conversions ARM: S3C2443: Change to using plat-samsung clksrc-clk implementation USB: Fix s3c-hsotg build following Samsung platform header moves ARM: S3C64XX: Reintroduce unconditional build of audio device ARM: 5961/1: ux500: fix CLKRST addresses ARM: 5977/1: arm: Enable backtrace printing on oops when PC is corrupted ASoC: Fix S3C64xx IIS driver for Samsung header reorg ARM: S3C2440: Fix plat-s3c24xx move of s3c2440/s3c2442 support [ARM] pxa: fix typo in mxm8x10.h [ARM] pxa/raumfeld: set GPIO drive bits for LED pins [ARM] pxa/zeus: Add support for mcp2515 CAN bus [ARM] pxa/zeus: Add support for onboard max6369 watchdog [ARM] pxa/zeus: Add Eurotech as the manufacturer [ARM] pxa/zeus: Correct the USB host initialisation flags [ARM] pxa/zeus: Allow usage of 8250-compatible UART in uncompress [ARM] pxa: refactor uncompress.h for non-PXA uarts [ARM] mmp2: fix incorrect calling of chip->mask_ack() for 2nd level cascaded IRQs ...
2010-03-08Merge branch 'origin' into devel-stableRussell King
Conflicts: arch/arm/mach-mx2/devices.c arch/arm/mach-mx2/devices.h sound/soc/pxa/pxa-ssp.c
2010-03-07Driver core: create lock/unlock functions for struct deviceGreg Kroah-Hartman
In the future, we are going to be changing the lock type for struct device (once we get the lockdep infrastructure properly worked out) To make that changeover easier, and to possibly burry the lock in a different part of struct device, let's create some functions to lock and unlock a device so that no out-of-core code needs to be changed in the future. This patch creates the device_lock/unlock/trylock() functions, and converts all in-tree users to them. Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Jean Delvare <khali@linux-fr.org> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Ming Lei <tom.leiming@gmail.com> Cc: Jiri Kosina <jkosina@suse.cz> Cc: Phil Carmody <ext-phil.2.carmody@nokia.com> Cc: Arjan van de Ven <arjan@linux.intel.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Rafael J. Wysocki <rjw@sisk.pl> Cc: Pavel Machek <pavel@ucw.cz> Cc: Len Brown <len.brown@intel.com> Cc: Magnus Damm <damm@igel.co.jp> Cc: Alan Stern <stern@rowland.harvard.edu> Cc: Randy Dunlap <randy.dunlap@oracle.com> Cc: Stefan Richter <stefanr@s5r6.in-berlin.de> Cc: David Brownell <dbrownell@users.sourceforge.net> Cc: Vegard Nossum <vegard.nossum@gmail.com> Cc: Jesse Barnes <jbarnes@virtuousgeek.org> Cc: Alex Chiang <achiang@hp.com> Cc: Kenji Kaneshige <kaneshige.kenji@jp.fujitsu.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andrew Patterson <andrew.patterson@hp.com> Cc: Yu Zhao <yu.zhao@intel.com> Cc: Dominik Brodowski <linux@dominikbrodowski.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Cc: Wolfram Sang <w.sang@pengutronix.de> Cc: CHENG Renquan <rqcheng@smu.edu.sg> Cc: Oliver Neukum <oliver@neukum.org> Cc: Frans Pop <elendil@planet.nl> Cc: David Vrabel <david.vrabel@csr.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Sarah Sharp <sarah.a.sharp@linux.intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-03-03pcmcia: disable pcmcia ioctl for !ARM, prepare for removalDominik Brodowski
The PCMCIA ioctl -- deprecated for years -- suffers from insufficient locking. As it already has been deprecated for years, with its removal long overdue, limit it to !SMP and !PREEMPT. Furthermore, the last legitimate use of the ioctl to be reported relates to the ARM architecture in 2008.[1] Attempts to resolve this issue turned out unsuccessful so far.[2] Other usages have only been reported as hear-say. If there are any legitiate and necessary use-cases remaining, please speak out before the end of the grace period until 2.6.3{5,6}(-rc1). [1] http://lists.infradead.org/pipermail/linux-pcmcia/2008-April/005440.html see also: http://lkml.org/lkml/2008/2/27/291 [2] http://lists.infradead.org/pipermail/linux-pcmcia/2008-April/005450.html http://lists.infradead.org/pipermail/linux-pcmcia/2010-January/006740.html see also: http://lists.infradead.org/pipermail/linux-pcmcia/2008-April/005453.html CC: Russell King <rmk+kernel@arm.linux.org.uk> CC: Alan Cox <alan@lxorguk.ukuu.org.uk> CC: Robert P. J. Day <rpjday@crashcourse.ca> CC: Jaswinder Singh Rajput <jaswinder@kernel.org> CC: linux-kernel@vger.kernel.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-03pcmcia: CodingStyle fixesDominik Brodowski
Fix most of the remaining CodingStyle issues in drivers/pcmcia , which related to wrong indent -- PCMCIA historically used 4 spaces. Also, remove a custom min() implementation with the generic one. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-02pcmcia: alchemy: fixup wrong commentsManuel Lauss
Commit 11b897cf84c37e6522db914793677e933ef311fb changed expected pcmcia area addresses from the 32bit pseudo to the real 36bit addresses, but did not update the comments. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-02pcmcia: remove irq_list parameter from pd6729Komuro
Remoe the irq_list parameter from pd6729, as it can and should be set via sysfs (and -- if available -- pcmciautils, which reads the information from /etc/pcmcia/config.opts ) [linux@dominikbrodowski.net: updated commit message] Signed-off-by: Komuro <komurojun-mbn@nifty.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-02yenta_socket: ENE CB712 CardBus bridge needs special treatment with Echo ↵Michal Pecio
Audio Indigo soundcards Indigos are well known for distortions when running on some buggy ENE controllers. There is a workaround in the yenta driver, but for some reason it isn't activated on CB712. However, I own a laptop with such chip and it seems that it also is affected - I can clearly hear occasional cracks, especially under heavy network load, and in Windows XP the card is completely unusable. This simple change fixed things for me. Addresses http://bugzilla.kernel.org/show_bug.cgi?id=15191 [linux@dominikbrodowski.net: extend it to the other ENE bridges] Signed-off-by: Michal Pecio <michal.pecio@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-03-02[ARM] sa1111: avoid using hardcoded IRQ numbers for PCMCIA driverEric Miao
The IRQs for card detect and status change are currently hardcoded in SA1111 PCMCIA driver, which can be actually obtained from the .irq[] from 'struct sa1111_dev' to keep it generic. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-02-27Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits) MIPS: Alchemy: defconfig updates MIPS: Alchemy: Fix Au1100 ethernet build failure MIPS: Alchemy: Repair db1500/bosporus builds MIPS: ARC: Cleanup unused definitions from sgialib.h MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses MIPS: Alchemy: use 36bit addresses for PCMCIA resources. MIPS: Cobalt: Fix theoretical port aliasing issue MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1) MIPS: Crazy spinlock speed test. MIPS: Optimize spinlocks. MIPS: Alchemy: devboard PM needs to save CPLD registers. MIPS: PowerTV: Eliminate duplicate opcode definition macros MIPS: Lemote 2F: Move printks out of port_access_lock. MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks. MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c. MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks. MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock. MIPS: Loongson: Remove pointless sample_lock from oprofile code. MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock. MIPS: i8259: Convert IRQ controller lock to raw spinlock. ...
2010-02-27Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: (49 commits) pcmcia: validate late-added resources pcmcia: allow for extension of resource interval pcmcia: remove useless msleep in ds.c pcmcia: use read_cis_mem return value pcmcia: handle error in serial_cs config calls pcmcia: add locking to pcmcia_{read,write}_cis_mem pcmcia: avoid prod_id memleak pcmcia: avoid sysfs-related lockup for cardbus pcmcia: use state machine for extended requery pcmcia: delay re-scanning and re-querying of PCMCIA bus pcmcia: use pccardd to handle eject, insert, suspend and resume requests pcmcia: use ops_mutex for rsrc_{mgr,nonstatic} locking pcmcia: use mutex for dynid lock pcmcia: assert locking to struct pcmcia_device pcmcia: add locking documentation pcmcia: simplify locking pcmcia: add locking to struct pcmcia_socket->pcmcia_state() pcmcia: protect s->device_count pcmcia: properly lock skt->irq, skt->irq_mask pcmcia: lock ops->set_socket ...
2010-02-27MIPS: Alchemy: use 36bit addresses for PCMCIA resources.Manuel Lauss
On Alchemy the PCMCIA area lies at the end of the chips 36bit system bus area. Currently, addresses at the far end of the 32bit area are assumed to belong to the PCMCIA area and fixed up to the real 36bit address before being passed to ioremap(). A previous commit enabled 64 bit physical size for the resource datatype on Alchemy and this allows to use the correct 36bit addresses when registering the PCMCIA sockets. This patch removes the 32-to-36bit address fixup and registers the Alchemy demo board pcmcia socket with the correct 36bit physical addresses. Tested on DB1200, with a CF card (ide-cs driver) and a 3c589 PCMCIA ethernet card. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Cc: Manuel Lauss <manuel.lauss@gmail.com> Patchwork: http://patchwork.linux-mips.org/patch/994/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: XXS1500 PCMCIA driver rewriteManuel Lauss
Rewritten XXS1500 PCMCIA socket driver, standalone (doesn't depend on au1000_generic.c) and added carddetect IRQ support. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Cc: Florian Fainelli <florian@openwrt.org> Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: PCMCIA: new socket driver for Au1000 demoboards.Manuel Lauss
New PCMCIA socket driver for all Db/Pb1xxx boards (except Pb1000), which replaces au1000_db1x00.c and (most of) au1000_pb1x00.c. Notable improvements: - supports Db1000, DB/PB1100/1500/1550/1200. - support for carddetect and statuschange IRQs. - pcmcia socket mem/io/attr areas and irqs passed through platform resource information. - doesn't freeze system during card insertion/ejection like the one it replaces. - boardtype is automatically detected using BCSR ID register. Run-tested on the DB1200. Cc: Linux-PCMCIA <linux-pcmcia@lists.infradead.org> Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-27MIPS: Alchemy: devboard register abstractionManuel Lauss
All Alchemy development boards have external CPLDs with a few registers in them. They all share an identical register layout with only a few minor differences (except the PB1000) in bit functions and base addresses. This patch - adds a primitive facility to initialize and use these external registers, - replaces all occurrences of bcsr->xxx accesses with calls to the new functions (the pb1200 cascade irq handling code is special). - collects BCSR register information scattered throughout the board headers in a central place. Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2010-02-25pcmcia: validate late-added resourcesDominik Brodowski
Currently, only those mem resources are validated which are already registered at the time the first PCMCIA card is inserted. As we can only validate resources immediately after card insert, store "registered" mem resources in mem_db, and only upon validation move them to mem_db_valid. When allocationg mem resources, mem_db_valid is then preferred to mem_db. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-02-23PCI: add pci_bus_for_each_resource(), remove direct bus->resource[] refsBjorn Helgaas
No functional change; this converts loops that iterate from 0 to PCI_BUS_NUM_RESOURCES through pci_bus resource[] table to use the pci_bus_for_each_resource() iterator instead. This doesn't change the way resources are stored; it merely removes dependencies on the fact that they're in a table. Signed-off-by: Bjorn Helgaas <bjorn.helgaas@hp.com> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22resource/PCI: mark struct resource as constDominik Brodowski
Now that we return the new resource start position, there is no need to update "struct resource" inside the align function. Therefore, mark the struct resource as const. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-22resource/PCI: align functions now return start of resourceDominik Brodowski
As suggested by Linus, align functions should return the start of a resource, not void. An update of "res->start" is no longer necessary. Cc: Bjorn Helgaas <bjorn.helgaas@hp.com> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net> Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
2010-02-17pcmcia: allow for extension of resource intervalDominik Brodowski
If a new interval overlaps or extends an existing interval in add_interval(), do not fail, but extend the existing interval. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
2010-02-17pcmcia: remove useless msleep in ds.cDominik Brodowski
As this is the socket thread (pccardd) starting up, we do not have anything to wait for in ds.c. Instead, wait the same amount of time in pccardd to allow userspace to catch up and - possibly - execute pcmcia-socket-startup. Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>