aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390/block
AgeCommit message (Collapse)Author
2008-10-21[PATCH] sanitize blkdev_get() and friendsAl Viro
* get rid of fake struct file/struct dentry in __blkdev_get() * merge __blkdev_get() and do_open() * get rid of flags argument of blkdev_get() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] pass fmode_t to blkdev_put()Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch dcssblkAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] switch dasdAl Viro
->compat_ioctl() actually had been useless here; generic logics works fine. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-21[PATCH] beginning of methods conversionAl Viro
To keep the size of changesets sane we split the switch by drivers; to keep the damn thing bisectable we do the following: 1) rename the affected methods, add ones with correct prototypes, make (few) callers handle both. That's this changeset. 2) for each driver convert to new methods. *ALL* drivers are converted in this series. 3) kill the old (renamed) methods. Note that it _is_ a flagday; all in-tree drivers are converted and by the end of this series no trace of old methods remain. The only reason why we do that this way is to keep the damn thing bisectable and allow per-driver debugging if anything goes wrong. New methods: open(bdev, mode) release(disk, mode) ioctl(bdev, mode, cmd, arg) /* Called without BKL */ compat_ioctl(bdev, mode, cmd, arg) locked_ioctl(bdev, mode, cmd, arg) /* Called with BKL, legacy */ Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2008-10-13[SCSI] block: separate failfast into multiple bits.Mike Christie
Multipath is best at handling transport errors. If it gets a device error then there is not much the multipath layer can do. It will just access the same device but from a different path. This patch breaks up failfast into device, transport and driver errors. The multipath layers (md and dm mutlipath) only ask the lower levels to fast fail transport errors. The user of failfast, read ahead, will ask to fast fail on all errors. Note that blk_noretry_request will return true if any failfast bit is set. This allows drivers that do not support the multipath failfast bits to continue to fail on any failfast error like before. Drivers like scsi that are able to fail fast specific errors can check for the specific fail fast type. In the next patch I will convert scsi. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-10-10[S390] Add ioctl support for EMC Symmetrix Subsystem Control I/ONigel Hislop
EMC Symmetrix Subsystem Control I/O through CKD dasd requires a specific parameter list sent to the array via a Perform Subsystem Function CCW. The Symmetrix response is retrieved from the array via a Read Subsystem Data CCW. Signed-off-by: Nigel Hislop <hislop_nigel@emc.com> Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] xpram: per device block request queues.Martin Schwidefsky
The xpram driver uses a single block device queue for all of its devices so far. With recent kernels removing xpram module fails to clean up all sysfs files. The next time the xpram module is loaded you'll get warnings: WARNING: at fs/sysfs/dir.c:463 sysfs_add_one+0x5e/0x64() sysfs: duplicate filename '35:0' can not be created Modules linked in: xpram(+) [last unloaded: xpram] Followed by the usual WARN_ON output, followed by an error message from kobject_add_internal, followed by a badness in genhd. Allocating a block queue per device fixes this. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] dasd: fix message flood for unsolicited interruptsStefan Haberland
In the unsolicited interupt handler fake IRBs from CIO have to be ignored because there is nothing to do. The function dump_sense should not be called if there is no sense data available. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] dcssblk: add >2G DCSSs support and stacked contiguous DCSSs support.Hongjie Yang
The DCSS block device driver is modified to add >2G DCSSs support and allow a DCSS block device to map to a set of contiguous DCSSs. The extmem code is also modified to use new Diagnose x'64' subcodes for >2G DCSSs. Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] bus_id -> dev_set_name() changesCornelia Huck
Convert most s390 users setting bus_id to dev_set_name(). css and ccw busses are deferred since they need some special treatment. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-10[S390] bus_id -> dev_name conversionsKay Sievers
bus_id -> dev_name() conversions in s390 code. [cornelia.huck@de.ibm.com: minor adaptions] Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-10-09block: don't depend on consecutive minor spaceTejun Heo
* Implement disk_devt() and part_devt() and use them to directly access devt instead of computing it from ->major and ->first_minor. Note that all references to ->major and ->first_minor outside of block layer is used to determine devt of the disk (the part0) and as ->major and ->first_minor will continue to represent devt for the disk, converting these users aren't strictly necessary. However, convert them for consistency. * Implement disk_max_parts() to avoid directly deferencing genhd->minors. * Update bdget_disk() such that it doesn't assume consecutive minor space. * Move devt computation from register_disk() to add_disk() and make it the only one (all other usages use the initially determined value). These changes clean up the code and will help disk->part dereference fix and extended block device numbers. Signed-off-by: Tejun Heo <tj@kernel.org> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-08-25[S390] dcss: fix build bug.Heiko Carstens
Fix this compile bug: CC drivers/s390/block/dcssblk.o drivers/s390/block/dcssblk.c: In function 'dcssblk_add_store': drivers/s390/block/dcssblk.c:387: error: implicit declaration of function 'dcssblk_get_segment_by_name' drivers/s390/block/dcssblk.c:389: error: label 'release_gd' used but not defined make[1]: *** [drivers/s390/block/dcssblk.o] Error 1 make: *** [drivers/s390/block/] Error 2 Cc: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-21[S390] dcssblk: fix race in dcssblk_add_store()Gerald Schaefer
Concurrently adding the same segment may lead to duplicate device_register() calls, which will trigger an error in kobject code: "... don't try to register things with the same name in the same directory". This patch adds a check to avoid this. Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-21[S390] cio: call ccw driver notify function with lock heldPeter Oberparleiter
Calling a ccw driver's notify function without the ccw device lock held opens up a race window between discovery and handling of a change in the device operational state. As a result, the device driver may encounter unexpected device malfunction, leading to out-of-retry situations or similar. Remove race by extending the ccw device lock from state change discovery to the calling of the notify function. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-21[S390] dasd: fix data size for PSF/PRSSD commandStefan Weinhuber
The Perform Subsystem Function/Prepare for Read Subsystem Data command requires 12 bytes of parameter data, but the respective data structure dasd_psf_prssd_data has a length of 16 bytes. Current storage servers ignore the obsolete bytes, but older models fail to execute the command and report an incorrect length error. This causes the device initilization for these devices to fail. To fix this problem we need to correct the dasd_psf_prssd_data structure and shorten it to the correct length. Reported-by: Ivan Warren <ivan@vmfacility.fr> Reviewed-by: Ivan Warren <ivan@vmfacility.fr> Tested-by: Ivan Warren <ivan@vmfacility.fr> CC: stable <stable@kernel.org> Signed-off-by: Stefan Weinhuber <wein@de.ibm.com>
2008-08-21[S390] drivers/s390: Use an IS_ERR test rather than a NULL testJulien Brunel
In case of error, functions dasd_kmalloc_request and idal_buffer_alloc return an ERR pointer, but never return the NULL pointer. So after a call to one of these functions, a NULL test should be replaced by an IS_ERR test. A simplified version of the semantic patch that makes this change is as follows: (http://www.emn.fr/x-info/coccinelle/) // <smpl> @correct_null_test@ expression x,E; statement S1, S2; @@ x = ( dasd_kmalloc_request(...) | idal_buffer_alloc(...) ) <... when != x = E if ( ( - x@p2 != NULL + ! IS_ERR ( x ) | - x@p2 == NULL + IS_ERR( x ) ) ) S1 else S2 ...> ? x = E; // </smpl> Signed-off-by: Julien Brunel <brunel@diku.dk> Signed-off-by: Julia Lawall <julia@diku.dk> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-08-01[S390] dasd: Add support for enhanced VM UIDStefan Weinhuber
When z/VM provides two virtual devices (minidisks) that reside on the same real device, both will receive the configuration data from the real device and thus get the same uid. To fix this problem, z/VM provides an additional configuration data record that allows to distinguish between minidisks. z/VM APAR VM64273 needs be installed so this fix has an effect. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-17[S390] dasd: use -EOPNOTSUPP instead of -ENOTSUPPStefan Haberland
return value -ENOTSUPP is not valid in userspace context, use -EOPNOTSUPP instead Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-17[S390] dasd: Fix cleanup in dasd_{fba,diag}_check_characteristics().Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-17[S390] dasd: fix unsolicited SIM handling.Stefan Haberland
Add missing schedule_bh and check that there is 32 bit sense data. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-07-14Merge branch 'bkl-removal' of git://git.lwn.net/linux-2.6Linus Torvalds
* 'bkl-removal' of git://git.lwn.net/linux-2.6: (146 commits) IB/umad: BKL is not needed for ib_umad_open() IB/uverbs: BKL is not needed for ib_uverbs_open() bf561-coreb: BKL unneeded for open() Call fasync() functions without the BKL snd/PCM: fasync BKL pushdown ipmi: fasync BKL pushdown ecryptfs: fasync BKL pushdown Bluetooth VHCI: fasync BKL pushdown tty_io: fasync BKL pushdown tun: fasync BKL pushdown i2o: fasync BKL pushdown mpt: fasync BKL pushdown Remove BKL from remote_llseek v2 Make FAT users happier by not deadlocking x86-mce: BKL pushdown vmwatchdog: BKL pushdown vmcp: BKL pushdown via-pmu: BKL pushdown uml-random: BKL pushdown uml-mmapper: BKL pushdown ...
2008-07-14Merge commit 'v2.6.26' into bkl-removalJonathan Corbet
2008-07-14[S390] Cleanup dcssblk printk messages.Hongjie Yang
Signed-off-by: Hongjie Yang <hongjie@us.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14[S390] Cleanup xpram printk messages.Martin Schwidefsky
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-07-14[S390] cio: introduce fcx enabled scsw formatPeter Oberparleiter
Extend the scsw data structure to the format required by fcx. Also provide helper functions for easier access to fields which are present in both the traditional as well as the modified format. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-06-20block-dasd_eer: BKL pushdownArnd Bergmann
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2008-05-30[S390] dasd: use a generic wait_queue for sleep_onStefan Haberland
Use a generic wait_queue to prevent the wait_queue in dasd_sleep_on_ functions from being referenced by callback_data while it does not exist any more. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-15[S390] dasd: fix timeout handling in interrupt handlerStefan Weinhuber
When the dasd_int_handler is called with an error code instead of an irb, the associated request should be restarted. This handling was missing from the -ETIMEDOUT case. In fact it should be done in any case. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-05-15[S390] dasd: Use const in busid functions.Cornelia Huck
We should use 'const char *' in the busid functions since the strings are not modified anyway. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-04-29s390: use non-racy method for proc entries creationDenis V. Lunev
Use proc_create() to make sure that ->proc_fops be setup before gluing PDE to main tree. Signed-off-by: Denis V. Lunev <den@openvz.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Alexey Dobriyan <adobriyan@gmail.com> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-29proc: remove proc_root from driversAlexey Dobriyan
Remove proc_root export. Creation and removal works well if parent PDE is supplied as NULL -- it worked always that way. So, one useless export removed and consistency added, some drivers created PDEs with &proc_root as parent but removed them as NULL and so on. Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-28return pfn from direct_access, for XIPJared Hulbert
Alter the block device ->direct_access() API to work with the new get_xip_mem() API (that requires both kaddr and pfn are returned). Some architectures will not do the right thing in their virt_to_page() for use by XIP (to translate from the kernel virtual address returned by direct_access(), to a user mappable pfn in XIP's page fault handler. However, we can't switch it to just return the pfn and not the kaddr, because we have no good way to get a kva from a pfn, and XIP requires the kva for its read(2) and write(2) handlers. So we have to return both. Signed-off-by: Jared Hulbert <jaredeh@gmail.com> Signed-off-by: Nick Piggin <npiggin@suse.de> Cc: Carsten Otte <cotte@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux-mm@kvack.org Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-04-17[S390] Remove code duplication from monreader / dcssblk.Martin Schwidefsky
Move the function that prints the segment warning messages found in the monreader driver and the dcssblk driver to the extmem base code. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] Fix a lot of sparse warnings.Heiko Carstens
Most noteable part of this commit is the new local header file entry.h which contains all the function declarations of functions that get only called from asm code or are arch internal. That way we can avoid extern declarations in C files. This is more or less the same that was done for sparc64. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] replace remaining __FUNCTION__ occurrencesHarvey Harrison
__FUNCTION__ is gcc-specific, use __func__ Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] dasd: add sim handling.Stefan Haberland
Now the system reports system information messages (SIM) to the user. The System Reference Code (SRC) which is reported to the user gives the abbility to lookup the reason of the SIM online in the documentation of the storage server. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] dasd: use GFP_DMA for fba private data allocationStefan Haberland
allocating dasd_fba_private without GFP_DMA results in IO error during read device characteristics of a FBA disk Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-04-17[S390] dasd: fix double elevator_exit call when deadline iosched fails to loadJosef 'Jeff' Sipek
I compiled the kernel without deadline, and the dasd code exits the old scheduler (CFQ), fails to load the new one (deadline), and then things just hang - with one of these (sorry about the weird chars - I copy & pasted it from a 3270 console): dasd(eckd): 0.0.0151: 3390/0A(CU:3990/01) Cyl:3338 Head:15 Sec:224 ------------ cut here ------------ Badness at kernel/mutex.c:134 Modules linked in: dasd_eckd_mod dasd_mod CPU: 0 Not tainted 2.6.25-rc3 #9 Process exe (pid: 538, task: 000000000d172000, ksp: 000000000d21ef88) Krnl PSW : 0404000180000000 000000000022fb5c (mutex_lock_nested+0x2a4/0x2cc) R:0 T:1 IO:0 EX:0 Key:0 M:1 W:0 P:0 AS:0 CC:0 PM:0 EA:3 Krnl GPRS: 0000000000024218 000000000076fc78 0000000000000000 000000000000000f 000000000022f92e 0000000000449898 000000000f921c00 000003e000162590 00000000001539c4 000000000d172000 070000007fffffff 000000000d21f400 000000000f8f2560 00000000002413f8 000000000022fb44 000000000d21f400 Krnl Code: 000000000022fb50: bf2f1000 icm %r2,15,0(%r1) 000000000022fb54: a774fef6 brc 7,22f940 000000000022fb58: a7f40001 brc 15,22fb5a >000000000022fb5c: a7f4fef2 brc 15,22f940 000000000022fb60: c0e5fffa112a brasl %r14,171db4 000000000022fb66: 1222 ltr %r2,%r2 000000000022fb68: a784fedb brc 8,22f91e 000000000022fb6c: c010002a0086 larl %r1,76fc78 Call Trace: (<000000000022f92e> mutex_lock_nested+0x76/0x2cc) <00000000001539c4> elevator_exit+0x38/0x80 <0000000000156ffe> blk_cleanup_queue+0x62/0x7c <000003e0001d5414> dasd_change_state+0xe0/0x8ec <000003e0001d5cae> dasd_set_target_state+0x8e/0x9c <000003e0001d5f74> dasd_generic_set_online+0x160/0x284 <000003e00011e83a> dasd_eckd_set_online+0x2e/0x40 <0000000000199bf4> ccw_device_set_online+0x170/0x2c0 <0000000000199d9e> online_store_recog_and_online+0x5a/0x14c <000000000019a08a> online_store+0xbe/0x2ec <000000000018456c> dev_attr_store+0x38/0x58 <000000000010efbc> sysfs_write_file+0x130/0x190 <00000000000af582> vfs_write+0xb2/0x160 <00000000000afc7c> sys_write+0x54/0x9c <0000000000025e16> sys32_write+0x2e/0x50 <0000000000024218> sysc_noemu+0x10/0x16 <0000000077e82bd2> 0x77e82bd2 Set elevator pointer to NULL in order to avoid double elevator_exit calls when elevator_init call for deadline iosched fails. Also make sure the dasd device driver depends on IOSCHED_DEADLINE so the default IO scheduler of the dasd driver is present. Signed-off-by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2008-03-05[S390] dasd: fix reference counting in display method for proc/dasd/devicesStefan Weinhuber
Using the /proc/dasd/devices interface leaves the reference counter of alias devices in an inconsistent state. A process that tries to set such a device offline afterwards will hang. The dasd_devices_show function returns immediately for alias devices and this code path was missing a dasd_put_device call. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-03-05[S390] dasd: let dasd erp matching recognize alias recoveryStefan Weinhuber
When a request fails that was started on an alias device then the first recovery step is to retry it on the base device. If the recovery request fails again with the same symptoms, the next step should not be a simple retry, but should be a proper recovery based on sense data, etc. To do so, the dasd recovery functions need to recognize the alias recovery step in the erp chain by comparing the start devices. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-19[S390] dcss: Fix Unlikely(x) != yRoel Kluin
Fix Unlikely(x) != y Cc: Gerald Schaefer <geraldsc@de.ibm.com> Cc: Stefan Weinhuber <wein@de.ibm.com> Cc: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Roel Kluin <12o3l@tiscali.nl> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-19[S390] dasd: fix locking in __dasd_device_process_final_queueStefan Weinhuber
After setting the status of the cqr and releasing the lock for the block cqr queue, we call the cqr callback function, which will usually just trigger the dasd_block_tasklet. But when the tasklet is already running the cqr might be processed before we invoke the callback function. In rare cases the callback pointer may already be invalid by the time we want to call it, which will result in a panic. Solution: Call the callback function first and then release the lock. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] dcss: Initialize workqueue before using it.Heiko Carstens
In case a dcss segment cannot be loaded blk_cleanup_queue will be called before blk_queue_make_request, leaving the struct work unplug_work of the request queue uninitialized before it is used. That leads also to the lockdep message below. To avoid that call blk_queue_make_request right after the request_queue has been allocated. This makes sure that the struct work is always initialized before it is used. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 Not tainted 2.6.24 #6 Process swapper (pid: 1, task: 000000000f854038, ksp: 000000000f85f980) 040000000f85f860 000000000f85f880 0000000000000002 0000000000000000 000000000f85f920 000000000f85f898 000000000f85f898 000000000001622e 0000000000000000 000000000f85f980 0000000000000000 0000000000000000 000000000f85f880 000000000000000c 000000000f85f880 000000000f85f8f0 0000000000342908 000000000001622e 000000000f85f880 000000000f85f8d0 Call Trace: ([<000000000001619e>] show_trace+0xda/0x104) [<0000000000016288>] show_stack+0xc0/0xf8 [<00000000000163d0>] dump_stack+0xb0/0xc0 [<000000000006e4ea>] __lock_acquire+0x47e/0x1160 [<000000000006f27c>] lock_acquire+0xb0/0xd8 [<000000000005a522>] __cancel_work_timer+0x9e/0x240 [<000000000005a72e>] cancel_work_sync+0x2a/0x3c [<0000000000165c46>] kblockd_flush_work+0x26/0x34 [<0000000000169034>] blk_sync_queue+0x38/0x48 [<0000000000169080>] blk_release_queue+0x3c/0xa8 [<000000000017bce8>] kobject_cleanup+0x58/0xac [<000000000017bd66>] kobject_release+0x2a/0x38 [<000000000017d28e>] kref_put+0x6e/0x94 [<000000000017bc80>] kobject_put+0x38/0x48 [<00000000001653be>] blk_put_queue+0x2a/0x38 [<0000000000168fee>] blk_cleanup_queue+0x82/0x90 [<0000000000213e7e>] dcssblk_add_store+0x34e/0x700 [<00000000005243b8>] dcssblk_init+0x1a0/0x308 [<000000000050a3c2>] kernel_init+0x1b2/0x3a4 [<000000000001ac82>] kernel_thread_starter+0x6/0xc [<000000000001ac7c>] kernel_thread_starter+0x0/0xc INFO: lockdep is turned off. Cc: Gerald Schaefer <geraldsc@de.ibm.com> Cc: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] dasd: fix panic caused by alias device offlineStefan Weinhuber
When an alias device is set offline while it is in use this may result in a panic in the cleanup part of the dasd_block_tasklet. The problem here is that there may exist some ccw requests that were originally created for the alias device and transferred to the base device when the alias was set offline. When these request are cleaned up later, the discipline pointer in the alias device may not be valid anymore. To fix this use the base device discipline to find the cleanup function. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] dasd: add ifcc handlingStefan Haberland
Adding interface control check (ifcc) handling in error recovery. First retry up to 255 times and if all retries fail try an alternate path if possible. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-28blk_end_request: changing s390 (take 4)Kiyoshi Ueda
This patch converts s390 to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. As a result, the interfaces of internal functions below are changed: o dasd_end_request o tapeblock_end_request Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-26[S390] usage of s390dbf: shrink number of debug areas to use.Peter Tiedemann
Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com>
2008-01-26[S390] constify function pointer tables.Jan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>