aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390/cio/device_id.c
AgeCommit message (Collapse)Author
2008-05-07[S390] cio: Remove cio_msg kernel parameter.Michael Ernst
The only sporadically used CIO_DEBUG messages are replaced by ordinary CIO_MSG_EVENT messages. The CIO_MSG_EVENT messages debug levels are consolidated. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] cio: make sense id procedure work with partial hardware responsePeter Oberparleiter
In some cases the current sense id procedure trips over incomplete hardware responses. In these cases, checking against the preset value of 0xFFFF is not enough. More critically, the VM DIAG call will always be considered to have provided data after such an incident, even if it was not successful at all. The solution is to always initialize the control unit data before doing a sense id call. Check the condition code before considering the control unit data. And initialize again, before evaluating the VM data. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Introduce subchannel->private.Cornelia Huck
Introduce a private pointer in struct subchannel to store per-subchannel type data (cannot use dev->priv since this is already used for something else). Create a new header io_sch.h for I/O subchannel specific structures and instructions. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-12-04[S390] cio: Issue SenseID per path.Cornelia Huck
We may receive a unit check for every path when we issue a SenseID. Unfortunately, the channel subsystem will try on a different path every time if we use a lpm of 0xff, which will exhaust our retry counter. Therefore, revert SenseID to its previous per-path behaviour and just leave out the suspend multipath reconnect. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-11-20[S390] cio: change device sense procedure to work with pav aliasesPeter Oberparleiter
Modify the sense id channel program to allow device sensing of pav alias devices which belong to a base device with ungrouped paths. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-22[S390] vmur: fix diag14 exceptions with addresses > 2GB.Michael Holzheu
There are several s390 diagnose calls, which must be executed below the 2GB memory boundary. In order to enforce this, those diagnoses must be compiled into the kernel. Currently diag 14 can be called within the vmur kernel module from addresses above 2GB. This leads to specification exceptions. This patch moves diag10, diag14 and diag210 into the new diag.c file. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-07-10[S390] Program check in diag 210 under 31 bitMichael Holzheu
If a virtual address is passed to the diag210 function under 31 bit, we get a programming exception, since diag 210 only works with physical addresses. To fix this, the content of the diag210 data structure is copied to a local structure and the physical address of that structure is passed to diagnose 210. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-02-12[S390] cio: use ARRAY_SIZE in device_id.cAhmed S. Darwish
Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-12-04[S390] cio: Retry internal operations after vary off.Cornelia Huck
If I/O was running on a just varied off chpid, it will be terminated. If this was a common I/O layer internal I/O, it needs to be retried. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-10-11[S390] cio: Use ccw_dev_id and subchannel_id in ccw_device_privateCornelia Huck
Use the proper structures to identify device and subchannel. Change get_disc_ccwdev_by_devno() to get_disc_ccwdev_by_dev_id(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-09-28[S390] Inline assembly cleanup.Martin Schwidefsky
Major cleanup of all s390 inline assemblies. They now have a common coding style. Quite a few have been shortened, mainly by using register asm variables. Use of the EX_TABLE macro helps as well. The atomic ops, bit ops and locking inlines new use the Q-constraint if a newer gcc is used. That results in slightly better code. Thanks to Christian Borntraeger for proof reading the changes. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-01-14[PATCH] s390: email-address changeCornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] s390: cleanup KconfigMartin Schwidefsky
Sanitize some s390 Kconfig options. We have ARCH_S390, ARCH_S390X, ARCH_S390_31, 64BIT, S390_SUPPORT and COMPAT. Replace these 6 options by S390, 64BIT and COMPAT. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] s390: multiple subchannel sets supportCornelia Huck
Add support for multiple subchannel sets. Works with arbitrary devices in subchannel set 1 and is transparent to device drivers. Although currently only two subchannel sets are available, this will work with the architectured maximum number of subchannel sets as well. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-01-06[PATCH] s390: introduce struct subchannel_idCornelia Huck
This patch introduces a struct subchannel_id containing the subchannel number (formerly referred to as "irq") and switches code formerly relying on the subchannel number over to it. While we're touching inline assemblies anyway, make sure they have correct memory constraints. Signed-off-by: Cornelia Huck <cohuck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!