aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390/cio
AgeCommit message (Collapse)Author
2007-08-22[S390] vmur: fix diag14 exceptions with addresses > 2GB.Michael Holzheu
There are several s390 diagnose calls, which must be executed below the 2GB memory boundary. In order to enforce this, those diagnoses must be compiled into the kernel. Currently diag 14 can be called within the vmur kernel module from addresses above 2GB. This leads to specification exceptions. This patch moves diag10, diag14 and diag210 into the new diag.c file. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22[S390] qdio: Refresh buffer states for IQDIO Asynchronous output queueKlaus D. Wacker
Hipersocket Multicast queue works asynchronously. When sending buffers, the buffer state change may happen delayed. The tasklet for checking changes in the outbound queue excluded IQDIO async queues from this process. This created either a hang situation when the queue ran full, or presented a hang situation a interface close time. The tasklet processing is changed to include IQDIO async queues when requesting buffer state refresh. Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-22[S390] qdio: fix EQBS handling on CCQ96Klaus D. Wacker
QDIO returned from EQBS instruction in any case after return code CCQ=96 was issued regardless whether buffer states for at least one buffer were extracted or not. This caused FCP devices to hang when running under z/VM and having QIOASSASIST=ON and having high I/O rates. In order to fix this qdio return code processing of EQBS instruction after CCQ=96 is changed that buffers are returned and if no buffers where extracted the instruction is repeated at once. Signed-off-by: Klaus D. Wacker <kdwacker@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-22[S390] cio: change confusing message in cmf.Cornelia Huck
cmf currently prints a message that more than 4096 channels are not allowed in basic mode - however, this can only be enforced if cmf was a module (which is no longer possible). It makes much more sense to not check the specified number of channels and just print a message if the block for basic mode could not be allocated (which may happen for any number of specified channels). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-22[S390] cio: dont forget to set last slot to NULL in ccw_uevent().Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-08-10[S390] qdio: make sure data structures are correctly aligned.Heiko Carstens
The slsb structure contained at the beginning of the qdio_q structure must start on a 256 byte boundary. To make sure this is the case even if slab debugging is turned on create an own slab cache for qdio_q structures. Besides that don't use the slab allocator to allocate whole pages. Use the page allocator instead. Also fix a few memory leaks in error handling code. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-08-10[S390] cio: avoid memory leak on error in css_alloc_subchannel().Cornelia Huck
sch->lock has been allocated in cio_validate_subchannel(), it must be freed if cio_modify() fails. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: Reorganize initialization.Cornelia Huck
- Localize more of the init calls in init_channel_subsystem(). - Print a warning if init_channel_subsystem() failed. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: Make CIO_* macros safe if dbfs are not available.Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: Clean up messages.Cornelia Huck
- Remove unneeded messages. - Move some messages into the debug feature. - Use dev_* where appropriate. - Use "cio: " prefix consistently. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: Remove deprecated rdc/rcd.Cornelia Huck
http://marc.info/?l=linux-kernel&m=118481061928246&w=2 seems to indicate disfavour of "deprecated", so let's just kill it now. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: Remove remains of _ccw_device_get_device_number().Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-27[S390] cio: css_sch_device_register() can be made static.Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-17[S390] Fix broken logic, SIGA flags must be bitwise ORedJan Glauber
Signed-off-by: Jan Glauber <jan.glauber@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-17[S390] cio: Dont print trailing \0 in modalias_show().Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-17[S390] qdio: output queue stall on FCP and network devicesFrank Pavlic
When running QIOASSIST enabled qdio devices in a z/VM environment the output queue for such devices stall in heavy workload situations. When SQBS and EQBS instructions returns CCQ=96 qdio does not reissue the instruction again with the register settings done by millicode but processed the returned qdio buffer. This is wrong. qdio has to reissue the instruction once again on CCQ=96, as we already do it for CCQ=97. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-07-11sysfs: add parameter "struct bin_attribute *" in .read/.write methods for ↵Zhang Rui
sysfs binary attributes Well, first of all, I don't want to change so many files either. What I do: Adding a new parameter "struct bin_attribute *" in the .read/.write methods for the sysfs binary attributes. In fact, only the four lines change in fs/sysfs/bin.c and include/linux/sysfs.h do the real work. But I have to update all the files that use binary attributes to make them compatible with the new .read and .write methods. I'm not sure if I missed any. :( Why I do this: For a sysfs attribute, we can get a pointer pointing to the struct attribute in the .show/.store method, while we can't do this for the binary attributes. I don't know why this is different, but this does make it not so handy to use the binary attributes as the regular ones. So I think this patch is reasonable. :) Who benefits from it: The patch that exposes ACPI tables in sysfs requires such an improvement. All the table binary attributes share the same .read method. Parameter "struct bin_attribute *" is used to get the table signature and instance number which are used to distinguish different ACPI table binary attributes. Without this parameter, we need to offer different .read methods for different ACPI table binary attributes. This is impossible as there are various ACPI tables on different platforms, and we don't know what they are until they are loaded. Signed-off-by: Zhang Rui <rui.zhang@intel.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-11sysfs: kill unnecessary attribute->ownerTejun Heo
sysfs is now completely out of driver/module lifetime game. After deletion, a sysfs node doesn't access anything outside sysfs proper, so there's no reason to hold onto the attribute owners. Note that often the wrong modules were accounted for as owners leading to accessing removed modules. This patch kills now unnecessary attribute->owner. Note that with this change, userland holding a sysfs node does not prevent the backing module from being unloaded. For more info regarding lifetime rule cleanup, please read the following message. http://article.gmane.org/gmane.linux.kernel/510293 (tweaked by Greg to not delete the field just yet, to make it easier to merge things properly.) Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-07-10[S390] Program check in diag 210 under 31 bitMichael Holzheu
If a virtual address is passed to the diag210 function under 31 bit, we get a programming exception, since diag 210 only works with physical addresses. To fix this, the content of the diag210 data structure is copied to a local structure and the physical address of that structure is passed to diagnose 210. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-31[S390] cio: deregister ccw device when pgid disband failedPeter Oberparleiter
Deregister ccw device when device failure is detected during offline- processing (e.g. when no last-path-gone indication was presented by the hardware) to prevent the device from entering a non-recoverable not-operational state. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-31[S390] cio: Use device_schedule_callback() for removing disconnected devices.Cornelia Huck
We can't deregister disconnected and orphaned devices directly from the online attribute's store method, but must take a detour. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10[S390] qdio: re-add lost perf_stats.tl_runs change in qdio_handle_pciUrsula Braun
Statement has been inadvertently lost with commit 00c0c6466c66bdf05f2a3dcf59e6895179ea8b76. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10[S390] cio: Make some structures and a function static.Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-10[S390] cio: Get rid of _ccw_device_get_device_number().Cornelia Huck
The function shouldn't have existed in the first place (not MSS-aware). Introduce a new function ccw_device_get_id() that extracts the ccw_dev_id structure of a ccw device and convert all users of _ccw_device_get_device_number to ccw_device_get_id. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-05-08s390: free skbs in finite amount of time in qethUrsula Braun
Free sent skbs in some finite amount of time. Affected are asynchronous queue of Hipersockets devices and the output queues of all eth-devices respectively. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-05-04[S390] qdio: make qdio statistics SMP-capableUrsula Braun
Use atomic_t/atomic64_t to make qdio performance statistics smp safe. Remove temporarily calculation of "total time of inbound actions". Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27s390: cio: Delay uevents for subchannelsCornelia Huck
We often have the situation that we register a subchannel and start device recognition, only to find out that the device is not usable after all, which triggers an unregister of the subchannel. This often happens on hundreds of subchannels on a LPAR, leading to a storm of events which aren't of any use. Therefore, use uevent_suppress to delay the KOBJ_ADD uevent for a subchannel until we know that its ccw_device is to be registered. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Eric Rannaud <eric.rannaud@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2007-04-27[S390] SPIN_LOCK_UNLOCKED cleanup in drivers/s390Milind Arun Choudhary
SPIN_LOCK_UNLOCKED cleanup,use __SPIN_LOCK_UNLOCKED instead. Signed-off-by: Milind Arun Choudhary <milindchoudhary@gmail.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: Unregister ccw devices directly.Cornelia Huck
We used to unregister ccw devices not directly from the I/O subchannel remove function in order to avoid lifelocks on the css bus semaphore. This semaphore is gone, and there is no reason to not unregister the ccw device directly (it is even better since it is more in keeping with the goal of immediate disconnect). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: cm_enable memory leak.Cornelia Huck
We allocage two pages when channel path measurements are enabled via cm_enable. We must not forget to free them again when channel path measurements are disabled again. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: ccwgroup register vs. unregister.Cornelia Huck
Introduce a mutex for struct ccwgroup to prevent simuntaneous register/unregister on the same ccwgroup device. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: Dont call css_update_ssd_info from interrupt context.Cornelia Huck
Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: fix subchannel channel-path data usagePeter Oberparleiter
Ensure that channel-path related subchannel data is only retrieved and used when it is valid and that it is updated when it may have changed. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: replace subchannel evaluation queue with bitmapPeter Oberparleiter
Use a bitmap for indicating which subchannels require evaluation instead of allocating memory for each evaluation request. This approach reduces memory consumption during recovery in case of massive evaluation request occurrence and removes the need for memory allocation failure handling. Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: Re-start path verification after aborting internal I/O.Stefan Bader
Path verification triggered by changes to the available CHPIDs will be interrupted by another change but not re-started. This results in an invalid path mask. To solve this make sure to completely re-start path verification when changing the available paths. Signed-off-by: Stefan Bader <shbader@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: Use add_uevent_var.Cornelia Huck
Convert ccw_uevent to use add_uevent_var and adapt snprint_alias. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: Channel-path configure function.Peter Oberparleiter
Add a new attribute to the channel-path sysfs directory through which channel-path configure operations can be triggered. Also listen for hardware events requesting channel-path configure operations and process them accordingly. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] cio: Clean up online_store.Cornelia Huck
Detangle the online_store code and make it more readable. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: observe chpid valid flagPeter Oberparleiter
Check validity flag of CHPID description data before continuing with channel-path initialization. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-04-27[S390] cio: Introduce separate files for channel-path related code.Peter Oberparleiter
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] cio: Allow 0 and 1 as input for channel path status attribute.Peter Oberparleiter
Channel path status can now be modified by writing '0' and '1' to the sysfs status attribute in addition to 'offline' and 'online' respectively. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] cio: Introduce struct chp_id.Peter Oberparleiter
Introduce data type for channel-path IDs. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-27[S390] cio/ipl: Clean interface between cio and ipl code.Heiko Carstens
Clean interface between cio and ipl code, so Peter stops complaining. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-04-04[S390] cio: Fix handling of interrupt for csch().Cornelia Huck
Wipe internal irb if the clear function bit is set before accumulating bits from the irb in order to follow hardware behaviour. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-03-26[S390] cio: Device status validity.Cornelia Huck
Only accumulate device status field in irb if it is valid. Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
2007-03-19[S390] cio: qdio slsb setupUrsula Braun
Make sure set_slsb problems are handled correctly in qdio_do_qdio_fill_input() and qdio_do_qdio_fill_output. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-03-15[PATCH] sysfs and driver core: add callback helper, used by SCSI and S390Alan Stern
This patch (as868) adds a helper routine for device drivers that need to set up a callback to perform some action in a different process's context. This is intended for use by attribute methods that want to unregister themselves or their parent device. Attribute method calls are mutually exclusive with unregistration, so such actions cannot be taken directly. Two attribute methods are converted to use the new helper routine: one for SCSI device deletion and one for System/390 ccwgroup devices. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Cc: Hugh Dickins <hugh@veritas.com> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Oliver Neukum <oneukum@suse.de> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-03-05[S390] cio: Call cancel_halt_clear even when actl == 0.Cornelia Huck
The subchannel may just be status pending, even with actl == 0. We must go through the cancel_halt_clear procedure to put the subchannel into a defined state. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-03-05[S390] cio: Use path verification to check for path state.Cornelia Huck
After I/O has been killed by the common I/O layer, trigger path verification which will queue cio_device_nopath_notify itself if it finds a device to be without paths. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2007-03-05[S390] cio: Fix locking when calling notify function.Cornelia Huck
Make sure we hold the device lock when we modify the ccw device structure but always call the notify function without the lock held. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>