aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2009-08-04Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (23 commits) [SCSI] sd: Avoid sending extended inquiry to legacy devices [SCSI] libsas: fix wide port hotplug issues [SCSI] libfc: fix a circular locking warning during sending RRQ [SCSI] qla4xxx: Remove hiwat code so scsi eh does not get escalated when we can make progress [SCSI] qla4xxx: Fix srb lookup in qla4xxx_eh_device_reset [SCSI] qla4xxx: Fix Driver Fault Recovery Completion [SCSI] qla4xxx: add timeout handler [SCSI] qla4xxx: Correct Extended Sense Data Errors [SCSI] libiscsi: disable bh in and abort handler. [SCSI] zfcp: Fix tracing of request id for abort requests [SCSI] zfcp: Fix wka port processing [SCSI] zfcp: avoid double notify in lowmem scenario [SCSI] zfcp: Add port only once to FC transport class [SCSI] zfcp: Recover from stalled outbound queue [SCSI] zfcp: Fix erp escalation procedure [SCSI] zfcp: Fix logic for physical port close [SCSI] zfcp: Use -EIO for SBAL allocation failures [SCSI] zfcp: Use unchained mode for small ct and els requests [SCSI] zfcp: Use correct flags for zfcp_erp_notify [SCSI] zfcp: Return -ENOMEM for allocation failures in zfcp_fsf ...
2009-07-30[SCSI] zfcp: Fix tracing of request id for abort requestsChristof Schmitt
The trace record for SCSI abort requests has a field for the request id of the request to be aborted. Put the real request id instead of zero. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: Fix wka port processingSwen Schillig
Under certain conditions it is possible that a WKA port ist not opened within the expected timeframe of half a second. In this situation the WKA port remains in the state OPENING preventing any succeding request to open the port. This led to unrecoverable remote ports. Fixing this by always setting an appropriate WKA port status before leaving the function and removing the timeout value here since it's not needed here because the general timeout processing would deal with it if required. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: avoid double notify in lowmem scenarioSwen Schillig
In a LOWMEM condition an ERP notification would have been sent twice causing an unpredictable behaviour of the ERP. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: Add port only once to FC transport classChristof Schmitt
When calling fc_remote_port_add make sure to not call it again before fc_remote_port_delete has been called. In other words, ensure to create a new fc_rport, then delete it, then create a new one again. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: Recover from stalled outbound queueChristof Schmitt
Depending on interruptions on some storage systems, the complete channel can stall which looks like an outbound queue stall to Linux. When trying to acquire a free SBAL for a non-SCSI command, zfcp waits for 5 seconds for a free slot to appear. This is the right place to detect a queue stall: If the wait times out, we assume a stalled queue and try to recover this. The overall strategy should be to trigger the erp from specific events, and not try an overall escalation from one failed port to a full-blown queue recovery. If we manage to send a command, the status codes for this command or a timeout will trigger the right follow-on actions. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: Fix erp escalation procedureChristof Schmitt
If an action fails, retry it until the erp count exceeds the threshold. If there is something fundamentally wrong, the FSF layer will trigger a more appropriate action depending on the FSF status codes. The followup for successful actions is a different followup than retrying failed actions, so split the code two functions to make this clear. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: Fix logic for physical port closeChristof Schmitt
After closing the port, we want it to be "not open" to consider the action to be successful. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: Use -EIO for SBAL allocation failuresChristof Schmitt
-ENOMEM is for memory allocation problems, -EIO for queue/SBAL allocation problems. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: Use unchained mode for small ct and els requestsChristof Schmitt
The ELS ADISC and the GID_PN requests sent from zfcp fit into unchained FSF requests. Change the FSF allocation logic to use unchained requests whenever possible where everything fits in one SBAL. This avoids acquiring more SBALs than necessary, especially during zfcp recovery when things might be stalled. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: Use correct flags for zfcp_erp_notifyChristof Schmitt
zfcp_erp_notify uses the ZFCP_ERP_STATUS_* flags, so it is ZFCP_STATUS_ERP_LOWMEM instead of ZFCP_ERP_NOMEM. Signalling ZFCP_ERP_FAILED is not necessary, the missing d_id will show that the nameserver did not return the d_id. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: Return -ENOMEM for allocation failures in zfcp_fsfChristof Schmitt
When a fsf_req or a qtcb cannot be allocated return -ENOMEM instead of -EIO. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: Acquire qdio_stat_lock when reading the queue utilizationChristof Schmitt
req_q_util is not atomic, so the qdio_stat_lock must be held when reading this variable. Reviewed-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-30[SCSI] zfcp: Fix invalid command orderSwen Schillig
We should not modify the port status after triggering an ERP action for the port. It is not guaranteed which status is finally active when the ERP action is performed. This can lead to situations which are unwanted and hard to debug in case of a failure. Signed-off-by: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2009-07-24[S390] zcrypt: fix scheduling of hrtimer ap_poll_timerFelix Beck
Every time a request is enqueued or there is some work outstanding from the ap_tasklet, the ap_poll_timer is scheduled again. Unfortunately it was permanently called. It looked as if it was started in the past and thus imediately expired. This has been changed. First it is checked if the hrtimer is already expired. Then the expiring time is forwarded and the timer restarted. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-07-12headers: smp_lock.h reduxAlexey Dobriyan
* Remove smp_lock.h from files which don't need it (including some headers!) * Add smp_lock.h to files which do need it * Make smp_lock.h include conditional in hardirq.h It's needed only for one kernel_locked() usage which is under CONFIG_PREEMPT This will make hardirq.h inclusion cheaper for every PREEMPT=n config (which includes allmodconfig/allyesconfig, BTW) Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-07-07[S390] improve suspend/resume error messagesChristian Borntraeger
From: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-07-07[S390] dasd: correct debugfeature sense dumpStefan Haberland
remove loop, add some debug data and use get_sense function Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-07-07[S390] monreader: fix dev_set_drvdata conversionHeiko Carstens
Fix this: drivers/s390/char/monreader.c: In function 'mon_open': drivers/s390/char/monreader.c:323: warning: passing argument 1 of 'dev_set_drvdata' from incompatible pointer type include/linux/device.h:457: note: expected 'struct device *' but argument is of type 'struct device **' drivers/s390/char/monreader.c: In function 'monreader_freeze': drivers/s390/char/monreader.c:466: warning: passing argument 1 of 'dev_get_drvdata' from incompatible pointer type include/linux/device.h:452: note: expected 'const struct device *' but argument is of type 'struct device **' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-07-07[S390] sclp: fix compile error for !SCLP_CONSOLEHeiko Carstens
Define an empty static inline version of sclp_console_pm_event() to fix the build error below for !SCLP_CONSOLE. drivers/s390/built-in.o: In function `sclp_rw_pm_event': sclp_rw.c:(.text+0x12f68): undefined reference to `sclp_console_pm_event' Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] dasd: fix refcounting in dasd_change_stateSebastian Ott
To set a dasd online dasd_change_state is called twice. The first cycle will schedule initial analysis of the device, set the rc to -EAGAIN and will not touch the device state any more. The initial analysis will in turn call dasd_change_state to increase the state to the final DASD_STATE_ONLINE. If the dasd_change_state on the second thread outruns the other one both finish with the state set to DASD_STATE_ONLINE and the device refcount will be decreased by 2. Fix this by leaving dasd_change_state on rc == -EAGAIN so that the refcount will always be decreased by 1. Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] driver_data accessMartin Schwidefsky
Replace the remaining direct accesses to the driver_data pointer with calls to the dev_get_drvdata() and dev_set_drvdata() functions. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] dasd_pm: fix stop flag handlingStefan Haberland
The stop flags are handled in the generic restore function so the stop flag is removed also for FBA and DIAG devices. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] ap/zcrypt: Suspend/Resume ap bus and zcryptFelix Beck
Add Suspend/Resume support to ap bus and zcrypt. All enhancements are done in the ap bus. No changes in the crypto card specific part are necessary. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] qdio: Sanitize do_QDIO sanity checksJan Glauber
Remove unneeded sanity checks from do_QDIO since this is the hot path. Change the type of bufnr and count to unsigned int so the check for the maximum value works. Reported-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] qdio: leave inbound SBALs primedJan Glauber
It is not required to change the state of primed SBALs. Leaving them primed saves a SQBS instruction under z/VM. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] qdio: merge AI tasklet into interrupt handlerJan Glauber
Since the adapter interrupt tasklet only schedules the queue tasklets and contains no code that requires serialization in can be merged with the adapter interrupt handler. That possibly safes some CPU cycles. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] qdio: extract all primed SBALs at onceJan Glauber
For devices without QIOASSIST primed SBALS were extracted in a loop. Remove the loop since get_buf_states can already return more than one primed SBAL. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] qdio: fix check for running under z/VMJan Glauber
The check whether qdio runs under z/VM was incorrect since SIGA-Sync is not set if the device runs with QIOASSIST. Use MACHINE_IS_VM instead to prevent polling under z/VM. Merge qdio_inbound_q_done and tiqdio_is_inbound_q_done. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] qdio: move adapter interrupt tasklet codeJan Glauber
Move the adapter interrupt tasklet function to the qdio main code since all the functions used by the tasklet are located there. Signed-off-by: Jan Glauber <jang@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] Use del_timer instead of del_timer_syncMichael Holzheu
When syncing the sclp console queue, we call del_timer_sync() while holding the "sclp_con_lock" spinlock. This lock is also taken in the timer function "sclp_console_timeout". Therefore the sync version of del_timer() cannot be used here. Because the synchronous deletion of the timer is only needed in the suspend callback and in that case only one CPU is remaining and therefore it is not possible that the timer function is running in parallel, we can safely use del_timer() instead of del_timer_sync(). Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] vt220 console: convert from bootmem to slabHeiko Carstens
The slab allocator is earlier available so convert the bootmem allocations to slab/gfp allocations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] sclp console: convert from bootmem to slabHeiko Carstens
The slab allocator is earlier available so convert the bootmem allocations to slab/gfp allocations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] 3270 console: convert from bootmem to slabHeiko Carstens
The slab allocator is earlier available so convert the bootmem allocations to slab/gfp allocations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-22[S390] 3215 console: convert from bootmem to slabHeiko Carstens
The slab allocator is earlier available so convert the bootmem allocations to slab/gfp allocations. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next-2.6: (55 commits) netxen: fix tx ring accounting netxen: fix detection of cut-thru firmware mode forcedeth: fix dma api mismatches atm: sk_wmem_alloc initial value is one net: correct off-by-one write allocations reports via-velocity : fix no link detection on boot Net / e100: Fix suspend of devices that cannot be power managed TI DaVinci EMAC : Fix rmmod error net: group address list and its count ipv4: Fix fib_trie rebalancing, part 2 pkt_sched: Update drops stats in act_police sky2: version 1.23 sky2: add GRO support sky2: skb recycling sky2: reduce default transmit ring sky2: receive counter update sky2: fix shutdown synchronization sky2: PCI irq issues sky2: more receive shutdown sky2: turn off pause during shutdown ... Manually fix trivial conflict in net/core/skbuff.c due to kmemcheck
2009-06-18net: group address list and its countJiri Pirko
This patch is inspired by patch recently posted by Johannes Berg. Basically what my patch does is to group list and a count of addresses into newly introduced structure netdev_hw_addr_list. This brings us two benefits: 1) struct net_device becames a bit nicer. 2) in the future there will be a possibility to operate with lists independently on netdevices (with exporting right functions). I wanted to introduce this patch before I'll post a multicast lists conversion. Signed-off-by: Jiri Pirko <jpirko@redhat.com> drivers/net/bnx2.c | 4 +- drivers/net/e1000/e1000_main.c | 4 +- drivers/net/ixgbe/ixgbe_main.c | 6 +- drivers/net/mv643xx_eth.c | 2 +- drivers/net/niu.c | 4 +- drivers/net/virtio_net.c | 10 ++-- drivers/s390/net/qeth_l2_main.c | 2 +- include/linux/netdevice.h | 17 +++-- net/core/dev.c | 130 ++++++++++++++++++-------------------- 9 files changed, 89 insertions(+), 90 deletions(-) Signed-off-by: David S. Miller <davem@davemloft.net>
2009-06-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: [SCSI] aic79xx: make driver respect nvram for IU and QAS settings [SCSI] don't attach ULD to Dell Universal Xport [SCSI] lpfc 8.3.3 : Update driver version to 8.3.3 [SCSI] lpfc 8.3.3 : Add support for Target Reset handler entrypoint [SCSI] lpfc 8.3.3 : Fix a couple of spin_lock and memory issues and a crash [SCSI] lpfc 8.3.3 : FC/FCOE discovery fixes [SCSI] lpfc 8.3.3 : Fix various SLI-3 vs SLI-4 differences [SCSI] qla2xxx: Resolve a performance issue in interrupt [SCSI] cnic, bnx2i: Fix build failure when CONFIG_PCI is not set. [SCSI] nsp_cs: time_out reaches -1 [SCSI] qla2xxx: fix printk format warnings [SCSI] ncr53c8xx: div reaches -1 [SCSI] compat: don't perform unneeded copy in sg_io code [SCSI] zfcp: Update FC pass-through support [SCSI] zfcp: Add FC pass-through support [SCSI] FC Pass Thru support
2009-06-16Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6: (64 commits) debugfs: use specified mode to possibly mark files read/write only debugfs: Fix terminology inconsistency of dir name to mount debugfs filesystem. xen: remove driver_data direct access of struct device from more drivers usb: gadget: at91_udc: remove driver_data direct access of struct device uml: remove driver_data direct access of struct device block/ps3: remove driver_data direct access of struct device s390: remove driver_data direct access of struct device parport: remove driver_data direct access of struct device parisc: remove driver_data direct access of struct device of_serial: remove driver_data direct access of struct device mips: remove driver_data direct access of struct device ipmi: remove driver_data direct access of struct device infiniband: ehca: remove driver_data direct access of struct device ibmvscsi: gadget: at91_udc: remove driver_data direct access of struct device hvcs: remove driver_data direct access of struct device xen block: remove driver_data direct access of struct device thermal: remove driver_data direct access of struct device scsi: remove driver_data direct access of struct device pcmcia: remove driver_data direct access of struct device PCIE: remove driver_data direct access of struct device ... Manually fix up trivial conflicts due to different direct driver_data direct access fixups in drivers/block/{ps3disk.c,ps3vram.c}
2009-06-16[S390] pm: dcssblk power management callbacks.Gerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: monreader power management callbacks.Gerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: monwriter power management callbacks.Gerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: memory hotplug power management callbacksGerald Schaefer
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: con3270 power management callbacks.Martin Schwidefsky
Introduce the power management callbacks to the 3270 driver. On suspend the current 3270 view is deactivated and for non-console 3270 device the release callback is done. This disconnects the current tty / fullscreen application from the 3270 device. On resume the current view is reactivated, on the tty you get a fresh login. If the system panics before the 3270 device has been resumed, the ccw device for the 3270 console is reactivated with ccw_device_force_console. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: smsgiucv power management callbacks.Martin Schwidefsky
Create dummy iucv-device to get control when the system is suspended and resumed. Server the smsg iucv path on suspend, reestablish the path on resume. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: netiucv power management callbacks.Ursula Braun
Patch establishes a dummy netiucv device to make sure iucv is notified about suspend/resume even if netiucv is the only loaded iucv-exploting module without any real net_device defined. The PM freeze callback closes all open netiucv connections. Thus the corresponding iucv path is removed. The PM thaw/restore callback re-opens previously closed netiucv connections. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: power management support for SCLP drivers.Michael Holzheu
The SCLP base driver defines a new notifier call back for all upper level SCLP drivers, like the SCLP console, etc. This guarantees that in suspend first the upper level drivers are suspended and afterwards the SCLP base driver. For resume it is the other way round. The SCLP base driver itself registers a new platform device at the platform bus and gets PM notifications via the dev_pm_ops. In suspend, the SCLP base driver switches off the receiver and sender mask This is done in sclp_deactivate(). After suspend all new requests will be rejected with -EIO and no more interrupts will be received, because the masks are switched off. For resume the sender and receiver masks are reset in the sclp_reactivate() function. When the SCLP console is suspended, all new messages are cached in the sclp console buffers. In resume, all the cached messages are written to the console. In addition to that we have an early resume function that removes the cached messages from the suspend image. Signed-off-by: Michael Holzheu <holzheu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: tape power management callbacksFrank Munzert
Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: vmlogrdr power management callbacksStefan Weinhuber
Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2009-06-16[S390] pm: vmur driver power management callbacksFrank Munzert
Signed-off-by: Frank Munzert <munzert@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>