aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2008-02-09[S390] sclp_vt220: Fix vt220 initializationChristian Borntraeger
There are two problems in the vt220 intialization: o Currently the vt220 console looses early printk events until the the vt220 tty is registered. o console should work if tty_register fails sclp_vt220_con_init calls __sclp_vt220_init and register_console. It does not register the driver with the sclp core code via sclp_register. That results in an sclp_send_mask=0. Therefore, __sclp_vt220_emit will reject buffers with EIO. Unfortunately register_console will cause the printk buffer to be sent to the console and, therefore, every early message gets dropped. The sclp_send_mask is set later during boot, when sclp_vt220_tty_init calls sclp_register. The solution is to move the sclp_register call from sclp_vt220_tty_init to __sclp_vt220_init. This makes sure that the console is properly registered with the sclp subsystem before the first log buffer messages are passed to the vt220 console. We also adopt the cleanup on error to keep the console alive if tty_register fails. Thanks to Peter Oberparleiter and Heiko Carstens for review and ideas for improvement. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] qdio: avoid hang when establishing qdio queuesUrsula Braun
If qdio establish runs in parallel with a channel error, ccw_device_start_timeout may not trigger the qdio_timeout_handler. In this case neither QDIO_IRQ_STATE_ESTABLISHED nor QDIO_IRQ_STATE_ERR is reached and the following wait_event hangs forever. Solution: do not make use of the timeout option with ccw_device_start, but add a timeout to the following wait_event. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] zcrypt: Do not start ap poll thread per defaultFelix Beck
Do not start ap poll thread per default to increase perfomance with z/VM. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-06calibrate_delay() must be __cpuinitAdrian Bunk
calibrate_delay() must be __cpuinit, not __{dev,}init. I've verified that this is correct for all users. While doing the latter, I also did the following cleanups: - remove pointless additional prototypes in C files - ensure all users #include <linux/delay.h> This fixes the following section mismatches with CONFIG_HOTPLUG=n, CONFIG_HOTPLUG_CPU=y: WARNING: vmlinux.o(.text+0x1128d): Section mismatch: reference to .init.text.1:calibrate_delay (between 'check_cx686_slop' and 'set_cx86_reorder') WARNING: vmlinux.o(.text+0x25102): Section mismatch: reference to .init.text.1:calibrate_delay (between 'smp_callin' and 'cpu_coregroup_map') Signed-off-by: Adrian Bunk <bunk@kernel.org> Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru> Cc: Richard Henderson <rth@twiddle.net> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Christian Zankel <chris@zankel.net> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-05[S390] dcss: Initialize workqueue before using it.Heiko Carstens
In case a dcss segment cannot be loaded blk_cleanup_queue will be called before blk_queue_make_request, leaving the struct work unplug_work of the request queue uninitialized before it is used. That leads also to the lockdep message below. To avoid that call blk_queue_make_request right after the request_queue has been allocated. This makes sure that the struct work is always initialized before it is used. INFO: trying to register non-static key. the code is fine but needs lockdep annotation. turning off the locking correctness validator. CPU: 2 Not tainted 2.6.24 #6 Process swapper (pid: 1, task: 000000000f854038, ksp: 000000000f85f980) 040000000f85f860 000000000f85f880 0000000000000002 0000000000000000 000000000f85f920 000000000f85f898 000000000f85f898 000000000001622e 0000000000000000 000000000f85f980 0000000000000000 0000000000000000 000000000f85f880 000000000000000c 000000000f85f880 000000000f85f8f0 0000000000342908 000000000001622e 000000000f85f880 000000000f85f8d0 Call Trace: ([<000000000001619e>] show_trace+0xda/0x104) [<0000000000016288>] show_stack+0xc0/0xf8 [<00000000000163d0>] dump_stack+0xb0/0xc0 [<000000000006e4ea>] __lock_acquire+0x47e/0x1160 [<000000000006f27c>] lock_acquire+0xb0/0xd8 [<000000000005a522>] __cancel_work_timer+0x9e/0x240 [<000000000005a72e>] cancel_work_sync+0x2a/0x3c [<0000000000165c46>] kblockd_flush_work+0x26/0x34 [<0000000000169034>] blk_sync_queue+0x38/0x48 [<0000000000169080>] blk_release_queue+0x3c/0xa8 [<000000000017bce8>] kobject_cleanup+0x58/0xac [<000000000017bd66>] kobject_release+0x2a/0x38 [<000000000017d28e>] kref_put+0x6e/0x94 [<000000000017bc80>] kobject_put+0x38/0x48 [<00000000001653be>] blk_put_queue+0x2a/0x38 [<0000000000168fee>] blk_cleanup_queue+0x82/0x90 [<0000000000213e7e>] dcssblk_add_store+0x34e/0x700 [<00000000005243b8>] dcssblk_init+0x1a0/0x308 [<000000000050a3c2>] kernel_init+0x1b2/0x3a4 [<000000000001ac82>] kernel_thread_starter+0x6/0xc [<000000000001ac7c>] kernel_thread_starter+0x0/0xc INFO: lockdep is turned off. Cc: Gerald Schaefer <geraldsc@de.ibm.com> Cc: Carsten Otte <cotte@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] sclp_tty/sclp_vt220: Fix scheduling while atomicChristian Borntraeger
Under load the following bug message appeared while using sysrq-t: BUG: scheduling while atomic: bash/3662/0x00000004 0000000000105b74 000000003ba17740 0000000000000002 0000000000000000 000000003ba177e0 000000003ba17758 000000003ba17758 0000000000105bfe 0000000000817ba8 000000003f2a5350 0000000000000000 0000000000000000 000000003ba17740 000000000000000c 000000003ba17740 000000003ba177b0 0000000000568630 0000000000105bfe 000000003ba17740 000000003ba17790 Call Trace: ([<0000000000105b74>] show_trace+0x13c/0x158) [<0000000000105c58>] show_stack+0xc8/0xfc [<0000000000105cbc>] dump_stack+0x30/0x40 [<000000000012a0c8>] __schedule_bug+0x84/0x94 [<000000000056234e>] schedule+0x5ea/0x970 [<0000000000477cd2>] __sclp_vt220_write+0x1f6/0x3ec [<0000000000477f00>] sclp_vt220_con_write+0x38/0x48 [<0000000000130b4a>] __call_console_drivers+0xbe/0xd8 [<0000000000130bf0>] _call_console_drivers+0x8c/0xd0 [<0000000000130eea>] release_console_sem+0x1a6/0x2fc [<0000000000131786>] vprintk+0x262/0x480 [<00000000001319fa>] printk+0x56/0x68 [<0000000000125aaa>] print_cfs_rq+0x45e/0x4a4 [<000000000012614e>] sched_debug_show+0x65e/0xee8 [<000000000012a8fc>] show_state_filter+0x1cc/0x1f0 [<000000000044d39c>] sysrq_handle_showstate+0x2c/0x3c [<000000000044d1fe>] __handle_sysrq+0xae/0x18c [<00000000002001f2>] write_sysrq_trigger+0x8a/0x90 [<00000000001f7862>] proc_reg_write+0x9a/0xc4 [<00000000001a83d4>] vfs_write+0xb8/0x174 [<00000000001a8b88>] sys_write+0x58/0x8c [<0000000000112e7c>] sysc_noemu+0x10/0x16 [<0000020000116f68>] 0x20000116f68 The problem seems to be, that with a full console buffer, release_console_sem disables interrupts with spin_lock_irqsave and then calls the console function without enabling interrupts. __sclp_vt220_write checks for in_interrupt, to decide if it can schedule. It should check for in_atomic instead. The same is true for sclp_tty.c. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] dasd: fix panic caused by alias device offlineStefan Weinhuber
When an alias device is set offline while it is in use this may result in a panic in the cleanup part of the dasd_block_tasklet. The problem here is that there may exist some ccw requests that were originally created for the alias device and transferred to the base device when the alias was set offline. When these request are cleaned up later, the discipline pointer in the alias device may not be valid anymore. To fix this use the base device discipline to find the cleanup function. Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] dasd: add ifcc handlingStefan Haberland
Adding interface control check (ifcc) handling in error recovery. First retry up to 255 times and if all retries fail try an alternate path if possible. Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] cio: Add shutdown callback for ccwgroup.Cornelia Huck
This intendeds to make proper shutdown of qeth devices easier. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] cio: Clean up chsc response code handling.Cornelia Huck
This provides unified return codes for common response codes and also makes the debug feature messages more similar and informational. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-05[S390] cio: make sense id procedure work with partial hardware responsePeter Oberparleiter
In some cases the current sense id procedure trips over incomplete hardware responses. In these cases, checking against the preset value of 0xFFFF is not enough. More critically, the VM DIAG call will always be considered to have provided data after such an incident, even if it was not successful at all. The solution is to always initialize the control unit data before doing a sense id call. Check the condition code before considering the control unit data. And initialize again, before evaluating the VM data. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-30[SCSI] zfcp: fix sense_buffer access bugFUJITA Tomonori
The commit de25deb18016f66dcdede165d07654559bb332bc changed scsi_cmnd.sense_buffer from a static array to a dynamically allocated buffer. We can't access to sense_buffer in '&cmd->sense_buffer' way. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-28[VLAN]: Turn VLAN_DEV_INFO into inline functionPatrick McHardy
Signed-off-by: Patrick McHardy <kaber@trash.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28[NETNS]: Add netns parameter to inet_(dev_)add_type.Eric W. Biederman
The patch extends the inet_addr_type and inet_dev_addr_type with the network namespace pointer. That allows to access the different tables relatively to the network namespace. The modification of the signature function is reported in all the callers of the inet_addr_type using the pointer to the well known init_net. Acked-by: Benjamin Thery <benjamin.thery@bull.net> Acked-by: Daniel Lezcano <dlezcano@fr.ibm.com> Signed-off-by: Eric W. Biederman <ebiederm@xmission.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2008-01-28blk_end_request: changing s390 (take 4)Kiyoshi Ueda
This patch converts s390 to use blk_end_request interfaces. Related 'uptodate' arguments are converted to 'error'. As a result, the interfaces of internal functions below are changed: o dasd_end_request o tapeblock_end_request Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: linux390@de.ibm.com Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com> Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-26[S390] usage of s390dbf: shrink number of debug areas to use.Peter Tiedemann
Signed-off-by: Peter Tiedemann <ptiedem@de.ibm.com>
2008-01-26[S390] constify function pointer tables.Jan Engelhardt
Signed-off-by: Jan Engelhardt <jengelh@computergmbh.de> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] dasd: fix loop in request expiration handlingStefan Haberland
Add time to the 'expires' value to avoid a loop caused by the cqr termination function Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] dasd: add hyper PAV support to DASD device driver, part 1Stefan Weinhuber
Parallel access volumes (PAV) is a storage server feature, that allows to start multiple channel programs on the same DASD in parallel. It defines alias devices which can be used as alternative paths to the same disk. With the old base PAV support we only needed rudimentary functionality in the DASD device driver. As the mapping between base and alias devices was static, we just had to export an identifier (uid) and could leave the combining of devices to external layers like a device mapper multipath. Now hyper PAV removes the requirement to dedicate alias devices to specific base devices. Instead each alias devices can be combined with multiple base device on a per request basis. This requires full support by the DASD device driver as now each channel program itself has to identify the target base device. The changes to the dasd device driver and the ECKD discipline are: - Separate subchannel device representation (dasd_device) from block device representation (dasd_block). Only base devices are block devices. - Gather information about base and alias devices and possible combinations. - For each request decide which dasd_device should be used (base or alias) and build specific channel program. - Support summary unit checks, which allow the storage server to upgrade / downgrade between base and hyper PAV at runtime (support is mandatory). Signed-off-by: Stefan Weinhuber <wein@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] drivers/s390/: Spelling fixesJoe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] use LIST_HEAD instead of LIST_HEAD_INITDenis Cheng
single list_head variable initialized with LIST_HEAD_INIT could almost always can be replaced with LIST_HEAD declaration, this shrinks the code and looks better. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] drivers/s390: Add missing "space"Joe Perches
Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] dasd: fix return value of dasd_generic_probe()Stefan Haberland
Using the return value of ccw_device_set_online as return value for dasd_generic_probe() causes the DASD to fail setting online Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Get rid of additional_cpus kernel parameter.Heiko Carstens
It caused only a lot of confusion. From now on cpu hotplug of up to NR_CPUS will work by default. If somebody wants to limit that then the possible_cpus parameter can be used. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] sclp: convert channel path configure code to use sync interface.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] Standby cpu activation/deactivation.Heiko Carstens
Add a new interface so that cpus can be put into standby state and configured state. Only offline cpus can be put into standby state or configured state. For that the new percpu sysfs attribute "configure" must be used. To put a cpu in standby state a "0" must be written to the attribute. In order to switch it into configured state a "1" must be written to the attribute. Only cpus in configured state can be brought online. In addition this patch introduces a static mapping of physical to logical cpus. As a result only the sysfs directories of present cpus will be created. To scan for new cpus the new sysfs attribute "rescan" must be used. Writing to /sys/devices/system/cpu/rescan will trigger a rescan of cpus and will create directories for new cpus. On IPL only configured cpus will be used. And on reboot/shutdown all cpus will remain in their current state (configured/standby). Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] sclp: sysfs interface for SCLP cpiMichael Ernst
Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] qdio: set QDIO_ACTIVATE_TIMEOUT to 5sUrsula Braun
Current definition of QDIO_ACTIVATE_TIMEOUT results in value 0. Thus it may cause endless wait in function qdio_activate(). Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] qdio: Remove double checked value.Sebastian Ott
Signed-off-by: Sebastian Ott <sebott@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: introduce timed recovery procedurePeter Oberparleiter
Add a timed recovery procedure to reactivate ccw devices in cases where HW/VM events are not sufficient to allow for proper recovery of reappearing channel paths. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: memory leak in cio processingMichael Ernst
Allocated kernel memory for locks is not freed in case of subchannel found to be invalid. Signed-off-by: Michael Ernst <mernst@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Fix ungroup vs. machine check race in ccwgroup.Cornelia Huck
There are two ways for a ccwgroup device to be unregistered: Via the ungroup attribute, or when on of the slave devices is killed by a machine check. As we have to unregister the ccwgroup device via a callback, we'll now have to check whether it hasn't been already unregistered because of a machine check. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Delete timer in ccw_device_verify_done().Cornelia Huck
Make sure pending timers are always deleted, even if we don't go through ccw_device_done(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: reduce cpu utilization during device scanPeter Oberparleiter
Minimize calls to cpu intensive function get_subchannel_by_schid() by introducing function for_each_subchannel_staged() which temporarily caches the information about registered subchannels in a bitmap. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Set driver->owner on css, ccw and ccwgroup busses.Cornelia Huck
Set the owner field in the embedded struct device_driver to the value provided in the {css,ccw,ccwgroup}_driver. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Use dev_{g,s}et_drvdata().Cornelia Huck
Also define helpers sch_{g,s}et_cdev() to make the intention more clear. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: I/O subchannel specific fields.Cornelia Huck
Some fields may be !0 only for I/O subchannels. Add some checks where required. Also adapt cio_enable_subchannel() to make the caller specify the intparm, which makes it more generic. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Extend adapter interrupt interface.Peter Oberparleiter
From: Cornelia Huck <cornelia.huck@de.ibm.com> Change the adapter interrupt interface in order to allow multiple adapter interrupt handlers to be registered. Indicators are now allocated by cio instead of the device driver. The qdio parts have been Acked-by: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Introduce subchannel->private.Cornelia Huck
Introduce a private pointer in struct subchannel to store per-subchannel type data (cannot use dev->priv since this is already used for something else). Create a new header io_sch.h for I/O subchannel specific structures and instructions. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Cleanup debug feature usage.Cornelia Huck
Cleanup cio_debug.h. Also make CIO_DEBUG add the "cio:" prefix to the printk string so that it isn't needed for the debug feature. Fix outdated comments for cio_debug_init() and clean it up. Enlarge cio_crw to the same size as cio_msg so we may actually find some relevant information there. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Add css_driver_{register,unregister}.Cornelia Huck
Add wrapper functions for driver_register and driver_unregister so that css drivers don't need to muck with struct device_driver directly. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Reset sch->driver.Cornelia Huck
sch->driver needs to be reset to NULL on failed probe and after remove. We also need to check for sch->driver on shutdown. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: css_driver: Use consistent parameters.Cornelia Huck
Make all callbacks in css_driver take a struct subchannel (and not a struct device). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Use helpers instead of container_of().Cornelia Huck
- Introduce to_cssdriver. - Use to_xxx instead of container_of where possible. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-26[S390] cio: Dump ccw device information in case of timeout.Sebastian Ott
Information about a ccw device will be dumped in case of a ccw timeout. This can be enabled with the kernel parameter ccw_timeout_log. Signed-off-by: Sebastian Ott <sebott@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits) [SCSI] usbstorage: use last_sector_bug flag universally [SCSI] libsas: abstract STP task status into a function [SCSI] ultrastor: clean up inline asm warnings [SCSI] aic7xxx: fix firmware build [SCSI] aacraid: fib context lock for management ioctls [SCSI] ch: remove forward declarations [SCSI] ch: fix device minor number management bug [SCSI] ch: handle class_device_create failure properly [SCSI] NCR5380: fix section mismatch [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices [SCSI] IB/iSER: add logical unit reset support [SCSI] don't use __GFP_DMA for sense buffers if not required [SCSI] use dynamically allocated sense buffer [SCSI] scsi.h: add macro for enclosure bit of inquiry data [SCSI] sd: add fix for devices with last sector access problems [SCSI] fix pcmcia compile problem [SCSI] aacraid: add Voodoo Lite class of cards. [SCSI] aacraid: add new driver features flags [SCSI] qla2xxx: Update version number to 8.02.00-k7. [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command. ...
2008-01-25cpu-hotplug: replace lock_cpu_hotplug() with get_online_cpus()Gautham R Shenoy
Replace all lock_cpu_hotplug/unlock_cpu_hotplug from the kernel and use get_online_cpus and put_online_cpus instead as it highlights the refcount semantics in these operations. The new API guarantees protection against the cpu-hotplug operation, but it doesn't guarantee serialized access to any of the local data structures. Hence the changes needs to be reviewed. In case of pseries_add_processor/pseries_remove_processor, use cpu_maps_update_begin()/cpu_maps_update_done() as we're modifying the cpu_present_map there. Signed-off-by: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-01-24zfcp: Use device_driver default attribute groups.Cornelia Huck
CC: Swen Schillig <swen@vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-24netiucv: Use device_driver default attribute groups.Cornelia Huck
CC: Ursula Braun <ubraun@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-11[SCSI] zfcp: Hold queue lock when checking port/unit handle for task ↵Christof Schmitt
management cmd We need to hold the queue-lock when checking whether we still have a valid unit/port handle for the task management command, i.e whether we can issue this request for this unit/port. If the error recovery is about to close this unit/port, then it competes for the queue-lock. If the close request issued by the error recovery wins, then it is guaranteed that this unit/port has been blocked for other requests. Signed-off-by: Christof Schmitt <christof.schmitt@de.ibm.com> Signed-off-by: Martin Peschke <mp3@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>