aboutsummaryrefslogtreecommitdiff
path: root/drivers/s390
AgeCommit message (Collapse)Author
2006-09-17[PATCH] s390: qeth driver fixes [6/6]Frank Pavlic
[PATCH 9/9] s390: qeth driver fixes [6/6] From: Frank Pavlic <fpavlic@de.ibm.com> - Hipersockets has no IPV6 support, thus prevent issueing SETRTG_IPV6 control commands on Hipersockets devices. - fixed error handling in qeth_sysfs_(un)register Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [5/6]Frank Pavlic
[PATCH 8/9] s390: qeth driver fixes [5/6] From: Frank Pavlic <fpavlic@de.ibm.com> fix kernel panic in qdio queue handling. qeth_qdio_clear_card() could be invoked by 2 CPUs simultaneously (for example reboot event and recovery). Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [4/6]Frank Pavlic
[PATCH 7/9] s390: qeth driver fixes [4/6] From: Frank Pavlic <fpavlic@de.ibm.com> - fix kernel crash due to race, set card->state to SOFTSETUP after card and card->dev are initialized properly. - remove CONFIG_QETH_PERF_STATS, use sysfs attribute instead, as we want to have the ability to turn on/off the statistics at runtime. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [3/6]Frank Pavlic
[PATCH 6/9] s390: qeth driver fixes [3/6] From: Frank Pavlic <fpavlic@de.ibm.com> fixed kernel panic caused by qeth driver: Using a bonding device qeth driver will realloc headroom for every skb coming from the bond device. Once this happens qeth frees the original skb and set the skb pointer to the new realloced skb. Under heavy transmit workload (e.g.UDP streams) through bond network device the qdio output queue might get full. In this case we return with EBUSY from qeth_send_packet. Returning to qeth_hard_start_xmit routine the skb address on the stack still points to the old address, which has been freed before. Returning from qeth_hard_start_xmit with EBUSY results in requeuing the skb. In this case it corrupts the qdisc queue and results in kernel panic. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [2/6]Frank Pavlic
[PATCH 5/9] s390: qeth driver fixes [2/6] From: Frank Pavlic <fpavlic@de.ibm.com> - fixed error handling in create_device_attributes - fixed some minor bugs in IPv4 and IPv6 address checking Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: qeth driver fixes [1/6]Frank Pavlic
[PATCH 4/9] s390: qeth driver fixes [1/6] From: Frank Pavlic <fpavlic@de.ibm.com> - Drop incoming packets with vlan_tag set if card->vlangrp is not set. - use always vlan_hwaccel_rx to pass vlan frames to the stack. - fix recovery problem. Device was recovered properly but still not working. netif_carrier_on call right before recovery start fixes it. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: Makefile cleanupFrank Pavlic
[PATCH 3/9] s390: Makefile cleanup From: Frank Pavlic <fpavlic@de.ibm.com> remove CONFIG_MPC from Makefile which was introduced accidently in the past. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: netiucv driver fixesFrank Pavlic
[PATCH 2/9] s390: netiucv driver fixes From: Frank Pavlic <fpavlic@de.ibm.com> - missing lock initialization added - avoid duplicate iucv-interfaces to the same peer - rw-lock added for manipulating the list of defined iucv connections Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-09-17[PATCH] s390: minor s390 network driver fixesFrank Pavlic
Hi Jeff, this is a RESEND of the nine s390 network driver patches. I finally found that my kmail corrupted almost every patch I sent the last time. Please apply these 9 patches and forget about my first attempt! Sorry for the delay, I had some fights with sendmail, IMAP and mutt configuration. Frank [RESEND PATCH 1/9] s390: minor s390 network driver fixes From: Frank Pavlic <fpavlic@de.ibm.com> - iucv driver: use do { } while (0) constructs instead of empty defines to avoid compile bugs. - ctc driver: missing lock initialization added - lcs driver: BUG_ON usage was removed accidently with the last lcs patch. Put them back in place. Signed-off-by: Frank Pavlic <fpavlic@de.ibm.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-30[S390] cio: unsolicited interrupts during sense pgid.Stefan Bader
Calls to set a device online with path grouping may get stuck in some cases because certain device conditions where discarded after unsolicited interrupts. Check subchannel activity after unsolicited interrupts and retry the operation if the subchannel is idle. Signed-off-by: Stefan Bader <shbader@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-30[S390] cio: no path after machine check.Peter Oberparleiter
Devices enter no-path state after disabling a channel path via the SE even though another path has been reenabled at the SE. The devices are set into no-path state before triggering path verification even though other paths may have become available. To fix this trigger path verification before setting a device into no-path state. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-30[S390] cio: kernel stack overflow.Heiko Carstens
Use different kind of assignment to make sure gcc doesn't create code that creates temp variables on the stack, assigns values to it and copies the content of the whole temp variable to the destination. This reduces stack usage of e.g. ccwgroup_driver_register from 976 to 48 bytes instead. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-30[S390] dasd: fix device shutdown process.Horst Hummel
Fix clear_IO handling (need to wait for interrupt) and introduced error-handling in shutdown processing. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-26Merge gregkh@master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Greg Kroah-Hartman
2006-08-24Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Greg Kroah-Hartman
2006-08-24[S390] dasd PAV enabling.Horst Hummel
The subsystem check in the PAV code is incorrect, it enables PAV per device instead of per subsystem. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-19[PATCH] s390: fix arp_tbl lock usage in qethHeiko Carstens
qeth: bhs must be disabled when accessing neighbour tables. ================================= [ INFO: inconsistent lock state ] Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-08-16[S390] inaccessible PAV alias devices on LPAR.Peter Oberparleiter
In some situations PAV alias devices on LPAR are not accessible. The initialization procedure required to enable access to PAV alias devices has to be performed per storage server subsystem and not only once per storage server. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-16[S390] dasd slab cache alignment.Heiko Carstens
The dasd_page_cache should return page addresses and therefore the cache must be created with an alignment of PAGE_SIZE. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-10[S390] dasd calls kzalloc while holding a spinlock.Horst Hummel
The dasd function dasd_set_uid calls kzalloc while holding the dasd_devmap_lock. Rearrange the code to do the memory allocation outside the lock. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-09[S390] dasd set offline kernel bug.Horst Hummel
The request queue flush function of the dasd driver has to dequeue the requests first and then call the end request function. Otherwise a kernel bug in ll_rw_block.c might get triggered. Signed-off-by: Horst Hummel <horst.hummel@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-07[S390] xpram system device class.Martin Schwidefsky
Remove system device class for xpram. It creates the directory hierarchy under /sys/devices/system/xpram/xpram0. The xpram0 directory is empty and it is always created while xpram1 and following devices are always missing, independent if the devices exist or not. Since the xpram devices are listed in /proc/partitions and /sys/block/ as slram<x> the system device class for xpram is meaningless. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-07[S390] lost interrupt after chpid vary off/on cycle.Peter Oberparleiter
I/O on a CCW device may stall if a channel path to that device is logicaly varied off/on. A user I/O interrupt can get misinterpreted as interrupt for an internal path verification operation due to a missing check and is therefore never reported to the device driver. Correct check for pending interruptions before starting path verification. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-07[S390] retry after deferred condition code.Cornelia Huck
Do a retry of read device characteristics / read configuration data when a deferred condition code 1 is encountered in ccw_device_wake_up(). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-07[S390] tape class return value handling.Heiko Carstens
Without this patch register_tape_dev() will always fail, but might return a value that is not an error number. This will lead to accesses to already freed memory areas... Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-08-06Merge ../linux-2.6James Bottomley
Conflicts: arch/ia64/hp/sim/simscsi.c Stylistic differences in two separate fixes for buffer->request_buffer problem. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] zfcp: bump version numberAndreas Herrmann
New version number fo zfcp driver. Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] zfcp: minor erp bug fixesAndreas Herrmann
Bug fixes for zfcp's erp: - trigger adapter reopen if do_QDIO fails - avoid erp deadlock if registration of scsi target or remote port hang - do not treat as error if exchange port data fails - decrease timeout for target reset and aborts - mark unit failed if slave_destroy is called Additionally some code cleanup was done: - made some functions void when retval is not of interest - shortened initialization of zfcp's host_template - corrected some comments Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] zfcp: improve management of request IDsVolker Sameske
Improve request handling. Use hash table to manage request IDs. Signed-off-by: Volker Sameske <sameske@de.ibm.com> Signed-off-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-27[S390] duplicate ccw devices in ccwgroup.Cornelia Huck
Fail to create a ccwgroup device if a ccw device is passed in twice. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-27[S390] permanent subchannel busy conditions may cause I/O stallPeter Oberparleiter
In special conditions where a subchannel rejects the HALT I/O- instruction with a busy indication (cc 2), I/O may stall. I/O request termination logic retries HALT I/O indefinitely because it expects HALT I/O to alter the subchannel status which is not true when cc 2 is returned. In case of a busy indication, try CLEAR I/O instruction immediately. Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-18[S390] sysfs_create_xxx return values.Heiko Carstens
Take return values of sysfs_create_group & friends into account. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-17[S390] channel measurement interval display.Cornelia Huck
Display avg_sample_interval in nanoseconds, like it is documented. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-17[S390] xpram module parameter parsing - take 2.Heiko Carstens
Don't use memparse since the default size modifier is 'k'. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] Fix sparse warnings.Heiko Carstens
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] path grouping and path verifications fixes.Cornelia Huck
1. Multipath devices for which SetPGID is not supported are not handled well. Use NOP ccws for path verification (sans path grouping) when SetPGID is not supported. 2. Check for PGIDs already set with SensePGID on _all_ paths (not just the first one) and try to find a common one. Moan if no common PGID can be found (and use NOP verification). If no PGIDs have been set, use the css global PGID (as before). (Rationale: SetPGID will get a command reject if the PGID it tries to set does not match the already set PGID.) 3. Immediately before reboot, issue RESET CHANNEL PATH (rcp) on all chpids. This will remove the old PGIDs. rcp will generate solicited CRWs which can be savely ignored by the machine check handler (all other actions create unsolicited CRWs). Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] xpram module parameter parsing.Heiko Carstens
The module parameters for xpram are not or in a wrong way parsed. The xpram module uses the module_param_array directive with an int parameter which causes the kernel to automatically parse the passed numbers. This will cause errors if arguments are omitted or cause wrong results if arguments have size qualifiers. Use module_param_array with charp and parse the arguments later. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-12[S390] subchannel register/unregister mutex.Cornelia Huck
Add a reg_mutex to prevent unregistering a subchannel before it has been registered. Since 2.6.17, we've seen oopses in kslowcrw when a device is found to be not operational during sense id when doing initial device recognition; it is not clear yet why that particular problem was not (yet) observed with earlier kernels... Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2006-07-10[PATCH] s390: broken null test in claw driverDave Jones
Whoops, better hope this never gets passed a null dev in its current state. Signed-off-by: Dave Jones <davej@redhat.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Michael Holzheu <holzheu@de.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] fix oddball boolean logic in s390 netiucvDave Jones
Signed-off-by: Dave Jones <davej@redhat.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Andreas Herrmann <aherrman@de.ibm.com> Cc: Michael Holzheu <holzheu@de.ibm.com> Acked-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-10[PATCH] s390: move var declarations behind ifdefSerge E. Hallyn
Two variables in drivers/s390/net/qeth_main.c:qeth_send_packet() are only used if CONFIG_QETH_PERF_STATS. Move their definition under the same ifdef to remove compiler warning. Signed-off-by: Serge Hallyn <serue@us.ibm.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-08[NET] gso: Add skb_is_gsoHerbert Xu
This patch adds the wrapper function skb_is_gso which can be used instead of directly testing skb_shinfo(skb)->gso_size. This makes things a little nicer and allows us to change the primary key for indicating whether an skb is GSO (if we ever want to do that). Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2006-07-03[PATCH] zfcp: fix incorrect usage of fsf_req_list_lockHeiko Carstens
================================= [ INFO: inconsistent lock state ] --------------------------------- inconsistent {in-hardirq-W} -> {hardirq-on-W} usage. swapper/0 [HC0[0]:SC1[1]:HE1:SE0] takes: (&adapter->fsf_req_list_lock){++..}, at: [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 {in-hardirq-W} state was registered at: [<000000000005fb0c>] __lock_acquire+0xad8/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a326>] _spin_lock+0x4e/0x68 [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000219dd4>] tiqdio_thinint_handler+0xd20/0x213c [<000000000020229a>] do_adapter_IO+0xb2/0xc0 [<0000000000206f32>] do_IRQ+0x136/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 irq event stamp: 129220 hardirqs last enabled at (129220): [<00000000000411e6>] tasklet_hi_action+0x5a/0x19c hardirqs last disabled at (129219): [<00000000000411c0>] tasklet_hi_action+0x34/0x19c softirqs last enabled at (129212): [<0000000000040b62>] __do_softirq+0x13a/0x180 softirqs last disabled at (129217): [<000000000001fd58>] do_softirq+0xec/0xf0 other info that might help us debug this: no locks held by swapper/0. stack backtrace: 00000000012bb670 0000000000000002 0000000000000000 00000000012bb780 00000000012bb6e8 0000000000399122 0000000000399122 0000000000016b0a 0000000000000000 0000000000000000 0000000000000000 00000000004660e8 0000000000000000 000000000000000d 00000000012bb6e0 00000000012bb758 0000000000368b90 0000000000016b0a 00000000012bb6e0 00000000012bb730 Call Trace: ([<0000000000016a26>] show_trace+0x76/0xdc) [<0000000000016b2c>] show_stack+0xa0/0xd0 [<0000000000016b8a>] dump_stack+0x2e/0x3c [<000000000005e3da>] print_usage_bug+0x27e/0x290 [<000000000005ea9c>] mark_lock+0x6b0/0x6c0 [<000000000005f33e>] __lock_acquire+0x30a/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a326>] _spin_lock+0x4e/0x68 [<0000000000274486>] zfcp_qdio_reqid_check+0x46/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000217bd2>] tiqdio_tl+0xd02/0x2120 [<000000000004123a>] tasklet_hi_action+0xae/0x19c [<0000000000040ae4>] __do_softirq+0xbc/0x180 [<000000000001fd58>] do_softirq+0xec/0xf0 [<0000000000040c38>] irq_exit+0x90/0xa8 [<0000000000206f40>] do_IRQ+0x144/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 ([<0000000000019416>] cpu_idle+0x206/0x250) [<000000000001405a>] rest_init+0x5a/0x68 [<0000000000536998>] start_kernel+0x39c/0x3dc [<0000000000013046>] _stext+0x46/0x1000 Fix incorrect usage of fsf_req_list_lock. It's used in tasklet context (irqs on) as well as in irq context. Therefore use the spin_lock_irqsave variant to avoid deadlocks. Acked-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] zfcp: fix incorrect usage of erp_lockHeiko Carstens
================================= [ INFO: inconsistent lock state ] --------------------------------- inconsistent {hardirq-on-W} -> {in-hardirq-W} usage. swapper/0 [HC1[1]:SC0[0]:HE0:SE1] takes: (&adapter->erp_lock){+-..}, at: [<000000000026c7f8>] zfcp_erp_async_handler+0x3c/0x70 {hardirq-on-W} state was registered at: [<000000000005f33e>] __lock_acquire+0x30a/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a7ae>] _write_lock+0x4e/0x68 [<000000000026d822>] zfcp_erp_adapter_strategy_generic+0x286/0xd94 [<000000000026fd72>] zfcp_erp_strategy_do_action+0x91e/0x1a94 [<0000000000271a3a>] zfcp_erp_thread+0x21a/0x1568 [<0000000000019096>] kernel_thread_starter+0x6/0xc [<0000000000019090>] kernel_thread_starter+0x0/0xc irq event stamp: 12078 hardirqs last enabled at (12077): [<0000000000019416>] cpu_idle+0x206/0x250 hardirqs last disabled at (12078): [<0000000000020458>] io_no_vtime+0xc/0x1c softirqs last enabled at (12072): [<0000000000040b62>] __do_softirq+0x13a/0x180 softirqs last disabled at (12059): [<000000000001fd58>] do_softirq+0xec/0xf0 other info that might help us debug this: no locks held by swapper/0. stack backtrace: 00000000012bb648 0000000000000002 0000000000000000 00000000012bb758 00000000012bb6c0 0000000000399122 0000000000399122 0000000000016b0a 0000000000000000 0000000000000001 0000000000000000 00000000004660e8 0000000000000000 000000000000000d 00000000012bb6b8 00000000012bb730 0000000000368b90 0000000000016b0a 00000000012bb6b8 00000000012bb708 Call Trace: ([<0000000000016a26>] show_trace+0x76/0xdc) [<0000000000016b2c>] show_stack+0xa0/0xd0 [<0000000000016b8a>] dump_stack+0x2e/0x3c [<000000000005e3da>] print_usage_bug+0x27e/0x290 [<000000000005e934>] mark_lock+0x548/0x6c0 [<000000000005fb0c>] __lock_acquire+0xad8/0xed0 [<00000000000604ae>] lock_acquire+0x9a/0xc8 [<000000000035a662>] _write_lock_irqsave+0x62/0x80 [<000000000026c7f8>] zfcp_erp_async_handler+0x3c/0x70 [<0000000000279178>] zfcp_fsf_req_dispatch+0xd8/0x1fa8 [<000000000027e538>] zfcp_fsf_req_complete+0x104/0xe4c [<0000000000274534>] zfcp_qdio_reqid_check+0xf4/0x178 [<000000000027469e>] zfcp_qdio_response_handler+0xe6/0x430 [<0000000000219dd4>] tiqdio_thinint_handler+0xd20/0x213c [<000000000020229a>] do_adapter_IO+0xb2/0xc0 [<0000000000206f32>] do_IRQ+0x136/0x16c [<0000000000020462>] io_no_vtime+0x16/0x1c [<0000000000019432>] cpu_idle+0x222/0x250 ([<0000000000019416>] cpu_idle+0x206/0x250) [<000000000001405a>] rest_init+0x5a/0x68 [<0000000000536998>] start_kernel+0x39c/0x3dc [<0000000000013046>] _stext+0x46/0x1000 Fix incorrect usage of erp_lock. Using the write_lock() variant is wrong, since this might lead to deadlocks. Acked-by: Andreas Herrmann <aherrman@de.ibm.com> Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] lockdep: annotate qeth driverHeiko Carstens
Annotate the qeth driver which uses a private skb-queue-head that is safely used in hardirq context too. Has no effect on non-lockdep kernels. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] lockdep: s390 turn validator off in machine-check handlerHeiko Carstens
Machine checks on s390 are always enabled (except in the machine check handler itself). Therefore use lockdep_off()/on() in the machine check handler to avoid deadlocks in the lock validator. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-07-03[PATCH] lockdep: irqtrace subsystem, s390 supportHeiko Carstens
irqtrace support for s390. Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-06-30Remove obsolete #include <linux/config.h>Jörn Engel
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de> Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-29Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/devfs-2.6: (22 commits) [PATCH] devfs: Remove it from the feature_removal.txt file [PATCH] devfs: Last little devfs cleanups throughout the kernel tree. [PATCH] devfs: Rename TTY_DRIVER_NO_DEVFS to TTY_DRIVER_DYNAMIC_DEV [PATCH] devfs: Remove the tty_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the line_driver devfs_name field as it's no longer needed [PATCH] devfs: Remove the videodevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the gendisk devfs_name field as it's no longer needed [PATCH] devfs: Remove the miscdevice devfs_name field as it's no longer needed [PATCH] devfs: Remove the devfs_fs_kernel.h file from the tree [PATCH] devfs: Remove devfs_remove() function from the kernel tree [PATCH] devfs: Remove devfs_mk_cdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_bdev() function from the kernel tree [PATCH] devfs: Remove devfs_mk_symlink() function from the kernel tree [PATCH] devfs: Remove devfs_mk_dir() function from the kernel tree [PATCH] devfs: Remove devfs_*_tape() functions from the kernel tree [PATCH] devfs: Remove devfs support from the sound subsystem [PATCH] devfs: Remove devfs support from the ide subsystem. [PATCH] devfs: Remove devfs support from the serial subsystem [PATCH] devfs: Remove devfs from the init code [PATCH] devfs: Remove devfs from the partition code ...
2006-06-29[S390] rework of channel measurement facility.Cornelia Huck
Fixes for several channel measurement facility bugs: * Blocks copied from the hardware might not be consistent. Solve this by moving the copying into idle state and repeating the copying. * avg_sample_interval changed with every read, even though no new block was available. Solve this by storing a timestamp when the last new block was received. * Several locking issues. * Measurements were not reenabled after a disconnected device became available again. * Remove #defines for ioctls that were never implemented. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>