aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/aic7xxx
AgeCommit message (Collapse)Author
2005-10-28[SCSI] use scmd_id(), scmd_channel() throughout codeJeff Garzik
Wrap a highly common idiom. Makes the code easier to read, helps pave the way for sdev->{id,channel} removal, and adds a token that can easily by grepped-for in the future. There are a couple sdev_id() and scmd_printk() updates thrown in as well. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] use sfoo_printk() in driversJeff Garzik
Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-02[SCSI] aic7xxx/aic79xx: fix module removal path not to panicJames Bottomley
In these drivers, scsi_remove_host() is called too late, at the point it is called, the driver has already shut down too far to accept any I/O that the shutdown might generate. Any generated I/O actually triggers a panic. Fix this by calling scsi_remove_host() as early as possible and not calling scsi_host_put() until just before we kfree the ahc_softc. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-13[SCSI] aic7xxx: move to dma_get_required_mask() and correct 39 bit assumptionsJames Bottomley
This patch moves aic7xxx over to the dma_get_required_mask() API and dumps its open coded memory check. It also appears from this bug: https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=167049 That 39 bit addressing doesn't work on older cards. I surmise that the AHC_LARGE_SCBS flag is the one that marks cards capable of using 39 bit addressing, so I also folded that check into the code. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-06Merge by hand (conflicts in sd.c)James Bottomley
2005-09-04[SCSI] aic7xxx: remove aiclib.cChristoph Hellwig
#include of C files and macro tricks to rename symbols are evil and just cause trouble. Let's doublicate the two functions as they're going to go away soon enough anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-28Merge HEAD from ../scsi-misc-2.6-tmp James Bottomley
2005-08-15[SCSI] aiclib remove deadChristoph Hellwig
remove lots of completely dead code from aiclib, there's not a lot left and even what's left is rather useless. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-15[SCSI] aic79xx: sane pci probingChristoph Hellwig
remove ahd_tailq and do sane pci probing. ported over from aic7xxx. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-15[SCSI] aic79xx: remove some dead codeChristoph Hellwig
remove some dead cruft, as done already in aic7xxx Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-13[SCSI] aic7xxx: lost multifunction flags handlingJames Bottomley
From: Christoph Hellwig <hch@lst.de> Multi-function cards need to inherit the PCI flags from the master PCI device. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12[SCSI] fix warning in aic7770.cakpm@osdl.org
From: "Martin J. Bligh" <mbligh@mbligh.org> drivers/scsi/aic7xxx/aic7770.c: In function `aic7770_config': drivers/scsi/aic7xxx/aic7770.c:129: warning: unused variable `l' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-09[SCSI] aic79xx: fix boot panic with no hardwareJames Bottomley
There's a spurious (and illegal since it's marked __exit) call to ahc_linux_exit() in ahc_linux_init() which causes a double list deletion of the transport class; remove it. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-07[SCSI] aic79xx: needs to select SPI_TRANSPORT_ATTRSakpm@osdl.org
without it you get this failure: drivers/built-in.o(.text+0xdcccd): In function `ahd_linux_slave_configure': drivers/scsi/aic7xxx/aic79xx_osm.c:636: undefined reference to `spi_dv_device' drivers/built-in.o(.text+0xdd7b1): In function `ahd_send_async': drivers/scsi/aic7xxx/aic79xx_osm.c:1652: undefined reference to `spi_display_xfer_agreement' drivers/built-in.o(.init.text+0x7b4d): In function `ahd_linux_init': drivers/scsi/aic7xxx/aic79xx_osm.c:2765: undefined reference to `spi_attach_transport' drivers/built-in.o(.init.text+0x7c94):drivers/scsi/aic7xxx/aic79xx_osm.c:2774: undefined reference to `spi_release_transport' drivers/built-in.o(.exit.text+0x72c): In function `ahd_linux_exit': drivers/scsi/aic7xxx/aic79xx_osm.c:2783: undefined reference to `spi_release_transport' Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-05[SCSI] aic7xxx/79xx: fix another potential panic due to a non existent targetJames Bottomley
I ran into this one sending bus resets across the hardware. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-04[SCSI] aic7xxx: upport all sequencer and core fixes from adaptec version 6.3.9James Bottomley
This patch upports all relevant code fixes and bumps the driver version to 7.0 to signify starting a new tree. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-04[SCSI] aic79xx: fixup DT settingHannes Reinecke
this patch is just a cross-port of the fixup for aic7xxx DT settings. As the same restrictions apply for aic79xx also (DT requires wide transfers) the dt setting routine should be modified equivalently. And an invalid period setting will be caught by ahd_find_syncrate() anyway. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-04Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-for-linus-2.6Linus Torvalds
2005-08-04[SCSI] fix aic7xxx performance issues since 2.6.12-rc2James Bottomley
Several people noticed we dropped quite a bit on benchmark figures. OK, it was my fault but unfortunately I discovered I ran out of brown paper bags a while ago and forgot to reorder them. The issue is that a construct introduced in the conversion of the driver to use the transport class keyed off whether the block request was tagged or not. However, the aic7xxx driver doesn't properly set up the block layer TCQ (it uses the wrong API), so the driver now things all requests are untagged and we keep it to a queue depth of a single element. Oops. The fix is to use the correct TCQ API. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03[SCSI] aic79xx: add hold_mcs to the transport parametersJames Bottomley
since this card can support the setting, add it to the parameter list. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03[SCSI] aic79xx: fix up transport settingsJames Bottomley
There's a slight problem in the way you've done the transport parameters; reading from the variables actually produces the current settings, not the ones you just set (and there's usually a lag because devices don't renegotiate until the next command goes over the bus). If you set the bit immediately, you get into the situation where the transport parameters report something as being set even if the drive cannot support it. I patched the driver to do it this way and also corrected a panic in the proc routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03[SCSI] aic79xx: DV parameter settingsHannes Reinecke
This patch updates various scsi_transport_spi parameters with the actual parameters used by the driver internally. Domain Validation for all devices should now work properly. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03[SCSI] aic79xx: update to use scsi_transport_spiHannes Reinecke
This patch updates the aic79xx driver to take advantage of the scsi_transport_spi infrastructure. Patch is quite a mess as some procedures have been reshuffled to be closer to the aic7xxx driver. Rejections fixed and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-03[SCSI] aic79xx: Remove busyqHannes Reinecke
From: Jeff Garzik <jgarzik@pobox.com> This patch removes the busyq in aic79xx and uses the command-queue from the midlayer instead. Additionally some dead code is removed. Signed-off-by: Hannes Reinecke <hare@suse.de> Fixed rejections Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-02[SCSI] aic7xxx: final fixes for DT handlingJames Bottomley
The aic7xxx can support Data Group transfers at periods > 12.5, so eliminate that restriction. Additionally wide is a requirement for DT so ensure wide is set if users request DT. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-02[PATCH] aic byteorder fixes after recent cleanupOlaf Hering
Rebuild the aic7xxx firmware doesn't work anymore after this change which appeared int 2.6.13-rc1: [SCSI] aic7xxx/aic79xx: remove useless byte order macro cruft Two files did not include byteorder.h, resulting in aic dying with a panic "Unknown opcode encountered in seq program" This fixes it for me. Signed-off-by: Olaf Hering <olh@suse.de> Acked-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-30[SCSI] aic7xxx: fix bug in DT handingJames Bottomley
Basically DT isn't reported or handled at all. The problem is that lines of code like this: spi_dt(starget) = tinfo->curr.ppr_options & MSG_EXT_PPR_DT_REQ; don't do what you think they do when spi_dt is a single bit variable. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-30[SCSI] aic byteorder fixes after recent cleanupOlaf Hering
aic doesnt work anymore after this change which appeared int 2.6.13-rc1: [SCSI] aic7xxx/aic79xx: remove useless byte order macro cruft 2 files did not include byteorder.h, aic died with panic "Unknown opcode encountered in seq program" This patch fixes it for me. Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-27[PATCH] turn many #if $undefined_string into #ifdef $undefined_stringOlaf Hering
turn many #if $undefined_string into #ifdef $undefined_string to fix some warnings after -Wno-def was added to global CFLAGS Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-11[SCSI] aic7xxx: remove ahc_tailqChristoph Hellwig
now that we do normal PCI probing there's no need to keep a list of all HBAs. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] aic7xxx: sane pci probingChristoph Hellwig
always probe in bus order, avoid any reordering Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-11[SCSI] aic79xx: ahd_linux_dev_reset() cleanupAndrew Morton
Use the macros consistently in ahd_linux_dev_reset(). If ahd_linux_dev_reset() really can be called with local interrupts disabled then yuk. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-03[SCSI] aic7xxx: fix boot hang with Fujitsu drivesJames Bottomley
Apparently these are the only drives that try to negotiate IU and QAS at u160 speeds. The aic7xxx driver can't cope with this. The fix is to eliminate the IU and QAS setting routines. I've #if 0'd them out, just in case we ever get the sequencer documentation out of Adaptec, since we'd then be able to fix the driver. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-26[SCSI] aic7xxx: correct target valid check in aic7xxx_proc.cJames Bottomley
From: Andy Whitcroft <apw@shadowen.org> Updated to remove the bogus translated target check. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-19aic7xxx/aic79xx_osm: revert completely bogus ahd_linux_queue() patchJeff Garzik
2005-06-17merge by hand (fix up qla_os.c merge error)James Bottomley
2005-06-17[SCSI] allow sleeping in ->eh_bus_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_device_reset_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-17[SCSI] allow sleeping in ->eh_abort_handler()Jeff Garzik
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-13[SCSI] aic7xxx: fix the BIOS limits setting routinesJames Bottomley
Following the go around over the SONY DVD that needs artificial limits, this should be the correct code for all cases (minus the debugging prints). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11[SCSI] aic7xxx: clean up eisa supportChristoph Hellwig
- the eisa layer only probes when it's actually safe, no need for a driver option - store the id table directly in linux format instead of convering at runtime Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11[SCSI] aic7xxx: remove some dead woodChristoph Hellwig
especially the now dead scsi_cmnd overlay Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11[SCSI] aic7xxx: remove ahc_find_softcChristoph Hellwig
there's absolutely no reason not to trust the driver private data Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11[SCSI] aic7xxx: do not check for duplicate pci idsChristoph Hellwig
pci layer handles this just fine for us Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-11[SCSI] aic7xxx/aic79xx: remove useless byte order macro cruftChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-06-03[SCSI] fix aic7xxx coupled parameter problemJames Bottomley
For setting coupled parameters, we need to be comparing against the goal settings, not the current ones. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-28[PATCH] swsusp: ahd_dv_0 can't be stoppedShaohua Li
This driver wants to set PF_NOFREEZE. Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Pavel Machek <pavel@ucw.cz> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-26[SCSI] aic7xxx: remove separate target and device allocationsJames Bottomley
Since the aic driver is now taught to speak in terms of the generic linux devices, we can now also dispense with the transport class get routines (since we update the parameters when the driver sees they change) and also plumb it into the spi transport transfer agreement reporting infrastructure. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-24[PATCH] aic7xxx_osm build fixAndrew Morton
Fix a c99ism. Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-05-20[SCSI] aic7xxx: fix U160 modeJames Bottomley
The new period/dt setting routines don't get the coupling of these parameters correct. This means that Domain Validation never gets DT set, and thus the drive gets restricted to U80. Fix this by restoring the couplings in the set routines. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>