aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/ipr.h
AgeCommit message (Collapse)Author
2006-04-13[SCSI] ipr: Bump versionBrian King
Bump ipr driver version to 2.1.3 Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] ipr: printk macro cleanup/removalBrian King
Remove some unused printk macros, make some more robust, and convert some to use standard printk macros when possible. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] ipr: Fixup device type checkBrian King
Fixup a check used by the ipr driver to determine if a given device is a SCSI disk. Due to the addition of support for attaching SATA devices, this check needs to be more robust. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-04-13[SCSI] ipr: Disk remove path cleanupBrian King
Instead of NULLing the resource entry pointer when a disk goes away to prevent any new commands being sent to it, set the adapter resource handle to an invalid value so new ops getting sent to it will fail with a selection timeout response. This patch is needed for future SATA patches. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-12[SCSI] ipr: Fix adapter initialization failureBrian King
Since scsi core is always sending scatterlists now, remove some code which was written with the bad assumption that a small transfer would not be sent down in a scatterlist. Without this fix, the ipr driver ends up sending garbage data to the adapter following a reset, causing it to fail the reset and take the adapter offline. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] ipr: Driver initialization fix for kexec/kdumpbrking@us.ibm.com
When kexec booting a kernel when the previous kernel did not call ipr's shutdown method, the ipr adapter does not get properly initialized, which can result in the ipr adapter completing commands issued by the previous kernel. Fix ipr to detect this scenario by reading the adapter's interrupt mask register and the microprocessor interrupt register. If the interrupt mask register indicates that interrupts are enabled or the reset alert bit is set when the card is probed, this means the card is in an unknown state and we hard reset the card. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Driver version 2.1.0brking@us.ibm.com
Bump the driver version. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Better handle failure of adapter bringup commandsbrking@us.ibm.com
Some new ipr adapters do not support some of the initialization commands currently sent to it from the driver. Handle these commands failing and continue on with the adapter initialization. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Increase ipr device scanning limitsbrking@us.ibm.com
Increase device scanning limits so that all devices are found. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: New PCI Idsbrking@us.ibm.com
Adds support for some new ipr adapters Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Support new device queueing modelbrking@us.ibm.com
New ipr adapters support a new device queueing model in the adapter firmware. The queueing model is the NACA queueing model, but it does not mean use of NACA is required. The new model removes some of the adapter firmware queue state that made handling QERR=0 almost impossible. The queueing model on older adapters included the concept of a queue frozen state, which would freeze the response queue in the adapter when a check condition occurred, requiring a a primitive to resume the queue. The new queueing model removes this complexity. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: New adapter error typesbrking@us.ibm.com
Handle some new types of ipr errors that can be returned by the adapter. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Handle device autosensebrking@us.ibm.com
Some newer ipr adapters are capable of returning autosense from devices that support it. This patch adds the data structures for the autosense buffer. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Runtime resetbrking@us.ibm.com
Some IPR RAID adapter will automatically create single device RAID arrays for all attached devices when the card is initialized. Setting the RUNTIME_RESET doorbell bit will prevent this from occurring, since we only want this behavior the first time the card is initialized and not each time the card happens to get reset. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: handle new adapter errorsbrking@us.ibm.com
Add support for handling some new errors that may be returned by ipr adapters. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Runtime debugging optionsbrking@us.ibm.com
Make some compile time debugging options runtime module options. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Fix adapter microcode update DMA mapping leakbrking@us.ibm.com
If the write buffer command that is issued to the ipr adapter to update its microcode fails for some reason, the DMA buffer will never get unmapped. Move the pci_map/unmap out of the IOA reset job so that the buffer is always clearly mapped and unmapped. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Write caching state host attributebrking@us.ibm.com
Adds a scsi_host sysfs attribute and module parm to enable/disable the write cache on an ipr adapter. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Physical resource error logging macrobrking@us.ibm.com
Adds a macro in the ipr driver for logging a physical device location. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-06[SCSI] ipr: Cleanup error structuresbrking@us.ibm.com
Simplify the ipr error structures a bit by removing some duplication. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] use sfoo_printk() in driversJeff Garzik
Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-05-20[SCSI] ipr: Driver version 2.0.14brking@us.ibm.com
Bump driver version Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!