aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/libiscsi.c
AgeCommit message (Collapse)Author
2008-01-11[SCSI] libiscsi: use is_power_of_2vignesh babu
Replacing n & (n - 1) for power of 2 check by is_power_of_2(n) Signed-off-by: vignesh babu <vignesh.babu@wipro.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libiscsi, iscsi class: set tmf to a safe default and export in sysfsMike Christie
Older tools will not be setting the tmf time outs since they did not exists, so set them to a safe default. And export abort and lu reset timeout values in sysfs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] iscsi: convert xmit path to iscsi chunksOlaf Kirch
Convert xmit to iscsi chunks. from michaelc@cs.wisc.edu: Bug fixes, more digest integration, sg chaining conversion and other sg wrapper changes, coding style sync up, and removal of io fields, like pdu_sent, that are not needed. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libiscsi: Drop host lock in queuecommandMike Christie
The driver does not need the host lock in queuecommand so drop it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libiscsi: clear conn->ctask when task is completed earlyMike Christie
If the current ctask is failed early, we legt the conn->ctask pointer pointing to a invalid task. When the xmit thread would send data for it, we would then oops. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libiscsi: Do not fail commands immediately during logoutMike Christie
If the target requests a logout, then we do not want to fail commands to scsi-ml right away. This patch just fails in pending commands for a requeue immediately, and then lets iscsid handle running commands like normal recovery. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libiscsi: fix nop handlingMike Christie
During root boot and shutdown the target could send us nops. At this time iscsid cannot be running, so the target will drop the session and the boot or shutdown will hang. To handle this and allow us to better control when to check the network this patch moves the nop handling to the kernel. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libiscsi: fix shutdownMike Christie
We were using the device delete sysfs file to remove each device then logout. Now in 2.6.21 this will not work because the sysfs delete file returns immediately and does not wait for the device removal to complete. This causes a hang if a cache sync is needed during shutdown. Before .21, that approach had other problems, so this patch fixes the shutdown code so that we remove the target and unbind the session before logging out and shut down the session Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libiscsi: grab eh_mutex during host resetMike Christie
I thought we may not need the eh mutex during host reset, but that is wrong with the new shutdown code. When start_session_recovery sets the state to terminate then drops the session lock. The scsi eh thread could then grab the session lock see that we are terminating and then return failed to scsi-ml. scsi-ml's eh then owns the command and will do whatever it wants with it. But then the iscsi eh thread could grab the session lock and want to complete the scsi commands that we in the LLD, but it no longer owns them and kaboom. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libiscsi: do not block session during logoutMike Christie
There is not need to block the session during logout. Since we are going to fail the commands that were blocked just fail them immediately instead. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libiscsi, iscsi_tcp: iscsi pool cleanupOlaf Kirch
iscsi_pool_init simplified iscsi_pool_init currently has a lot of duplicate kfree() calls it does when some allocation fails. This patch simplifies the code a little by using iscsi_pool_free to tear down the pool in case of an error. iscsi_pool_init also returns a copy of the item array to the caller. Not all callers use this array, so we make it optional. Instead of allocating a second array and return that, allocate just one array, of twice the size. Update users of iscsi_pool_{init,free} This patch drops the (now useless) second argument to iscsi_pool_free, and updates all callers. It also removes the ctask->r2ts array, which was never used anyway. Since the items argument to iscsi_pool_init is now optional, we can pass NULL instead. Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libiscsi,iser: patch for AHS supportBoaz Harrosh
- The default initialization of hdr_max is the minimum - sizeof(struct iscsi_cmd) - Once this patch goes into iser the default initialization at libiscsi can be removed. - This is not yet full support for AHSs at iser end. But it should be easy. Just allocate more space at iser_desc right after iscsi_hdr. Than at transmission time use ctask->hdr_len to retrieve the total size of all iscsi pdu headers. See previous patch at iscsi_tcp.[ch] Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] iscsi_tcp, libiscsi: initial AHS SupportBoaz Harrosh
at libiscsi generic code - currently code assumes a storage space of pdu header is allocated at llds ctask and is pointed to by iscsi_cmd_task->hdr. Here I add a hdr_max field pertaining to that storage, and an hdr_len that accumulates the current use of the pdu-header. - Add an iscsi_next_hdr() inline which returns the next free space to write new Header at. Also iscsi_next_hdr() is used to retrieve the address at which to write the header-digest. - Add iscsi_add_hdr(length). What the user do is calls iscsi_next_hdr() for address of the new header, than calls iscsi_add_hdr(length) with the size of the new header. iscsi_add_hdr() will check if space is available and update to the new size. length must be padded according to standard. - Add 2 padding inline helpers thanks to Olaf. Current patch does not use them but Following patches will. Also moved definition of ISCSI_PAD_LEN to iscsi_proto.h which had PAD_WORD_LEN that was never used anywhere. - Let iscsi_prep_scsi_cmd_pdu() signal an Error return since now it is possible that it will fail. - I was tired of yet again writing a "this is a digest" comment next to sizeof(__u32) so I defined a new ISCSI_DIGEST_SIZE. Now I don't need any comments. Changed all places that used sizeof(__u32) or "4" in connection to a digest. iscsi_tcp specific code - At struct iscsi_tcp_cmd_task allocate maximum space allowed in standard for all headers following the iscsi_cmd header. and mark it so in iscsi_tcp_session_create() - At iscsi_send_cmd_hdr() retrieve the correct headers size and write header digest at iscsi_next_hdr(). Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Olaf Kirch <olaf.kirch@oracle.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] iscsi: Prettify resid handling and some extra checksBoaz Harrosh
- Check to see that OVERFLOW is not negative indicating a bug. - Unify handling of UNDERFLOW and OVERFLOW to the same code. - Also handle BIDI_OVERFLOW. Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libiscsi, iscsi_tcp: add device supportMike Christie
This patch adds logical unit reset support. This should work for ib_iser, but I have not finished testing that driver so it is not hooked in yet. This patch also temporarily reverts the iscsi_tcp r2t write out patch. That code is completely rewritten in this patchset. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-11-14[SCSI] iscsi: return data transfer residual for data-out commandsTony Battersby
Currently, the iSCSI driver returns the data transfer residual for data-in commands (e.g. read) but not data-out commands (e.g. write). This patch makes it return the data transfer residual for both types of commands. Signed-off-by: Tony Battersby <tonyb@cybernetics.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-08-15[SCSI] libiscsi: sync up iscsi and scsi eh's access to the connectionMike Christie
The iscsi eh could be tearing down the session/connection while the scsi eh is still sending task management functions. If when we drop the session lock to grab the recv lock, the iscsi eh tears down the connection we will oops. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-08-15[SCSI] libiscsi: fix null ptr regression when aborting a command with data ↵Mike Christie
to transfer We do not want to send data if we are aborting a task. There is a check in iscsi_xmit_ctask, but right before calling this we overwrite the state so we always go right past the test. Sending data causes problems because when we clean up from a successful abort the LLD assumes that the task is not running. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-27[SCSI] libiscsi: fix cmd seqeunce number checkingMike Christie
We should not be checking the cmd windown for just handling r2t responses. And if the window closes in on us, always have scsi-ml requeue the command from our queuecommand function. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-27[SCSI] libiscsi: make sure session is not blocked when removing hostMike Christie
When we logout we block the session since we are not taking any more commands, but when we call remove host we want to make sure any IO that got queued up and blocked gets failed upwards quickly, so we unblock the session and fail it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-17[SCSI] iscsi_tcp: convert to use the data buffer accessorsFUJITA Tomonori
- remove the unnecessary map_single path. - convert to use the new accessors for the sg lists and the parameters. TODO: use scsi_for_each_sg(). Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-02[SCSI] iscsi class, iscsi_tcp, iser, qla4xxx: add netdevname sysfs attrMike Christie
iSCSI must support software iscsi (iscsi_tcp, iser), hardware iscsi (qla4xxx), and partial offload (broadcom). To be able to allow each stack or driver or port (virtual or physical) to be able to log into the same target portal we use the initiator tuple [[HWADDRESS | NETDEVNAME], INITIATOR_NAME] and the target tuple [TARGETNAME, CONN_ADDRESS, CONN_PORT] to id a session. This patch adds the netdev name, which is used by software iscsi when it binds a session to a netdevice using the SO_BINDTODEVICE sock opt. It cannot use HWADDRESS because if someone did vlans then the same netdevice will have the same mac and the initiator,target id will not be unique. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-02[SCSI] libiscsi: make can_queue configurableMike Christie
This patch allows us to set can_queue and cmds_per_lun from userspace when we create the session/host. From there we can set it on a per target basis. The patch fully converts iscsi_tcp, but only hooks up ib_iser for cmd_per_lun since it currently has a lots of preallocations based on can_queue. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-02[SCSI] libiscsi: fix iscsi cmdsn allocationMike Christie
The cmdsn allocation and pdu transmit code can race, and we can end up sending a pdu with cmdsn 10 before a pdu with 5. The target will then fail the connection/session. This patch fixes the problem by delaying the cmdsn allocation until we are about to send the pdu. This also removes the xmitmutex. We were using the connection xmitmutex during error handling to handle races with mtask and ctask cleanup and completion. For ctasks we now have nice refcounting and for the mtask, if we hit the case where the mtask timesout and it is floating around somewhere in the driver, we end up dropping the session. And to handle session level cleanup, we use the xmit suspend bit along with scsi_flush_queue and the session lock to make sure that the xmit thread is not possibly transmitting a task while we are trying to kill it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] iscsi tcp: fix iscsi xmit state machineMike Christie
If iscsi_tcp partially sends a header, it would recalculate the header size and readd the size of the digest (if header digests are used).This would cause us to send sizeof(digest) extra bytes when we sent the rest of the header. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] iscsi class, iscsi_tcp, ib_iser: add sysfs chap fileMike Christie
The attached patches add sysfs files for the chap settings to the iscsi transport class, iscsi_tcp and ib_iser. This is needed for software iscsi because there are times when iscsid can die and it will need to reread the values it was using. And it is needed by qla4xxx for basic management opertaions. This patch does not hook in qla4xxx yet, because I am not sure the mbx command to use. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] iscsi: Some fixes in preparation for bidirectional support - total_lengthMike Christie
- Remove shadow of request length from struct iscsi_cmd_task. - change all users to use scsi_cmnd->request_bufflen directly (With bidi we will use scsi-ml API to retrieve in/out length) Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] iscsi: Some fixes in preparation for bidirectional support - exp_datasnMike Christie
This patch fixes handling of expected datasn/r2tsn as received from target. It is done according to: T10 rfc3720 section 3.2.2.3. Data Sequencing. . unify expected datasn/r2tsn into one counter . calculate than check expected datasn/r2tsn. On error print a message and fail the request. (TODO use iscsi retransmits) . remove the FIXME ;) . avoid zero length memset Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Benny Halevy <bhalevy@panasas.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] iscsi class, qla4xxx, iscsi_tcp, ib_iser: export/set initiator nameMike Christie
For iscsi root boot, software iscsi needs to know what the BIOS/OF initiator used for the initiator name so this puts it in sysfs for userspace to be able to pick up. For hw iscsi, it is nice to see what the card is using. This patch adds the new param, and hooks in qla4xxx, iscsi_tcp, and ib_iser. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Cc: David C Somayajulu <david.somayajulu@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-06-01[SCSI] libiscsi, iscsi_tcp, ib_iser : add sw iscsi host get/set params helpersMike Christie
iscsid and udev need to key off the hw address being used so add some helpers for iser and iscsi tcp. Also convert them Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Cc: Roland Dreier <rdreier@cisco.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11[SCSI] libiscsi: use get_unalignedMike Christie
Dave Miller meantioned that the data buffer in a past sense fixup patch was not gauranteed to be aligned properly for ia64. This patch has libiscsi use get_unalinged to make sure. There are a couple more places in the digest handling we may need to do this, but we are in the middle of fixing that code for big endien systems so just the sense access is fixed here. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11[SCSI] iscsi: rename DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTHMike Christie
This patch renames DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH to avoid confusion with the drivers default values (DEFAULT_MAX_RECV_DATA_SEGMENT_LENGTH is the iscsi RFC specific default). Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11[SCSI] libiscsi: clear mtaskMike Christie
Consolidate the mtask clearing code. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11[SCSI] libiscsi: flush work before freeing connectionMike Christie
It's possible that we call iscsi_xmitworker after iscsi_conn_release which causes a oops. This patch flushes the workqueue. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-09[PATCH] iscsi endianness annotationsAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-01-06[SCSI] libiscsi: fix senselen calculationMike Christie
Yanling Qi, noted that when the sense data length of a check-condition is greater than 0x7f (127), senselen = (data[0] << 8) | data[1] will become negative. It causes different kinds of panics from GPF, spin_lock deadlock to spin_lock recursion. We were also swapping this value on big endien machines. This patch fixes both issues by using be16_to_cpu(). Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-11-22WorkStruct: make allyesconfigDavid Howells
Fix up for make allyesconfig. Signed-Off-By: David Howells <dhowells@redhat.com>
2006-11-10[SCSI] iscsi: add newlines to debug messagesPete Wyckoff
Some messages from debug_scsi do not have trailing newlines, making console messages difficult to read. Fix that. Signed-off-by: Pete Wyckoff <pw@osc.edu> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] libiscsi: fix logout pdu processingMike Christie
According to the iscsi RFC, we cannot send other requests if we have sent a logout pdu. This patch enforces this requirement by blocking the session and suspending the send thread. Userspace decides if we restart the connection or if we just free everything. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] libiscsi: fix aen supportMike Christie
We have been dropping the pdu. We should just send it to userspace and let it handle it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] libiscsi: fix missed iscsi_task_put in xmit error pathMike Christie
from bhalevy@gmail.com: It looks like change 652 to libiscsi.c added some dead code around line 670 if (rc) { spin_unlock_bh(&conn->session->lock); goto again; } since 5 lines above we goto again if (rc). It looks like the previous if (rc) should go away if we want to put the ctask before breaking out of the while loop with "goto again" (see following patch). Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] libiscsi: fix oops in connection create failure pathMike Christie
If connection creation fails we end up calling list_del on a invalid struct. This then causes an oops. We are not acutally using the lists (old MCS code we thought might be useful elsewhere) so this patch just removes that code. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] libiscsi: don't call into lld to cleanup taskMike Christie
In the normal IO path we should not be calling back into the LLD since the LLD will have cleaned up the task before or after calling complete pdu. For the fail_command path we still need to do this to force the cleanup. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] libiscsi: check that command ptr is set before accessing itMike Christie
If the scsi eh sends a TUR and the session is down we could return SCSI_ML_HOST_BUSY. scsi eh will ignore this and send ask us to abort the command and we blindly accesst the command ptr. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] libiscsi: only check burst lengths when sending unsol dataMike Christie
The first burst length is only relevant if immedate data = Yes or if Initial R2T is No Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] iscsi_tcp: fix padding, data digests, and IO at weird offsetsMike Christie
iscsi_tcp calculates padding by using the expected transfer length. This has the problem where if we have immediate data = no and initial R2T = yes, and the transfer length ended up needing padding then we send: 1. header 2. padding which should have gone after data 3. data Besides this bug, we also assume the target will always ask for nice transfer lengths and the first burst length will always be a nice value. As far as I can tell form the RFC this is not a requirement. It would be silly to do this, but if someone did it we will end doing bad things. Finally the last bug in that bit of code is in our handling of the recalculation of data digests when we do not send a whole iscsi_buf in one try. The bug here is that we call crypto_digest_final on a iscsi_sendpage error, then when we send the rest of the iscsi_buf, we doiscsi_data_digest_init and this causes the previous data digest to be lost. And to make matters worse, some of these bugs are replicated over and over and over again for immediate data, solicited data and unsolicited data. So the attached patch made over the iscsi git tree (see kernel.org/git for details) which I updated today to include the patches I said I merged, consolidates the sending of data, padding and digests and calculation of data digests and fixes the above bugs. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] add refcouting around ctask usage in main IO patchMike Christie
It is possible that a ctask could be completing and getting cleaned up at the same time, we are finishing up the last data transfer. This could then result in the data transfer code using stale or invalid values. This patch adds a refcount to the ctask. When the count goes to zero then we know the transmit thread and recv thread or softirq are not touching it and we can safely release it. The eh should not need to grab a reference because it only cleans up a task if it has both the xmit mutex and recv lock (or recv side suspended). Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] libiscsi, iscsi_tcp, iscsi_iser: check that burst lengths are valid.Mike Christie
iSCSI RFC states that the first burst length must be smaller than the max burst length. We currently assume targets will be good, but that may not be the case, so this patch adds a check. This patch also moves the unsol data out offset to the lib so the LLDs do not have to track it. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28[SCSI] iscsi bugfixes: fix mem leaks in libiscsiMike Christie
We were leaking some strings. This patch just frees them. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-28[SCSI] iscsi bugfixes: pass errors from complete_pdu to callerMike Christie
Must pass ISCSI_ERR values from the recv path and propogate them upwards. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>