aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/libsas
AgeCommit message (Collapse)Author
2008-02-23Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6: (25 commits) [SCSI] qlogicpt: section fixes [SCSI] mvsas: convert from rough draft to working driver [SCSI] mvsas: Add Marvell 6440 SAS/SATA driver [SCSI] libsas: correctly flush the LU queue on error recovery [SCSI] aic94xx: fix sequencer hang on error recovery [SCSI] st: compile fix when DEBUG set to one [SCSI] stex: stex_internal_copy should be called with sg_count in struct st_ccb [SCSI] stex: stex_direct_copy shouldn't call dma_map_sg [SCSI] lpfc: Balance locking [SCSI] qla4xxx: fix up residual handling [SCSI] libsas: fix error handling [SCSI] arcmsr: fix message allocation [SCSI] mptbase: fix use-after-free's [SCSI] iscsi transport: make 2 functions static [SCSI] lpfc: make lpfc_disable_node() static [SCSI] ips: fix data buffer accessors conversion bug [SCSI] gdth: don't call pci_free_consistent under spinlock [SCSI] qla2xxx: fix compile warning for printk format [SCSI] aic7xx: mitigate HOST_MSG_LOOP invalid SCB ff panic [SCSI] scsi_debug: disable clustering ...
2008-02-22[SCSI] libsas: correctly flush the LU queue on error recoveryJames Bottomley
The current sas_scsi_clear_queue_lu() is wrongly checking for commands which match the pointer to the one passed in. It should be checking for commands which are on the same logical unit as the one passed in. Fix this by checking target pointer and LUN for equality. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-22[SCSI] libsas: fix error handlingJames Bottomley
The libsas error handler has two fairly fatal bugs 1. scsi_sas_task_done calls scsi_eh_finish_cmd() too early. This happens if the task completes after it has been aborted but before the error handler starts up. Because scsi_eh_finish_cmd() decrements host_failed and adds the task to the done list, the error handler start check (host_failed == host_busy) never passes and the eh never starts. 2. The multiple task completion paths sas_scsi_clear_queue_... all simply delete the task from the error queue. This causes it to disappear into the ether, since a command must be placed on the done queue to be finished off by the error handler. This behaviour causes the HBA to hang on pending commands. Fix 1. by moving the SAS_TASK_STATE_ABORTED check to an exit clause at the top of the routine and calling ->scsi_done() unconditionally (it is a nop if the timer has fired). This keeps the task in the error handling queue until the eh starts. Fix 2. by making sure every task goes through task complete followed by scsi_eh_finish_cmd(). Tested this by firing resets across a disk running a hammer test (now it actually survives without hanging the system) Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-02-19libata: eliminate the home grown dma padding in favour ofJames Bottomley
that provided by the block layer ATA requires that all DMA transfers begin and end on word boundaries. Because of this, a large amount of machinery grew up in ide to adjust scatterlists on this basis. However, as of 2.5, the block layer has a dma_alignment variable which ensures both the beginning and length of a DMA transfer are aligned on the dma_alignment boundary. Although the block layer does adjust the beginning of the transfer to ensure this happens, it doesn't actually adjust the length, it merely makes sure that space is allocated for transfers beyond the declared length. The upshot of this is that scatterlists may be padded to any size between the actual length and the length adjusted to the dma_alignment safely knowing that memory is allocated in this region. Right at the moment, SCSI takes the default dma_aligment which is on a 512 byte boundary. Note that this aligment only applies to transfers coming in from user space. However, since all kernel allocations are automatically aligned on a minimum of 32 byte boundaries, it is safe to adjust them in this manner as well. tj: * Adjusting sg after padding is done in block layer. Make libata set queue alignment correctly for ATAPI devices and drop broken sg mangling from ata_sg_setup(). * Use request->raw_data_len for ATAPI transfer chunk size. * Killed qc->raw_nbytes. * Separated out killing qc->n_iter. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2008-01-25Merge git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (200 commits) [SCSI] usbstorage: use last_sector_bug flag universally [SCSI] libsas: abstract STP task status into a function [SCSI] ultrastor: clean up inline asm warnings [SCSI] aic7xxx: fix firmware build [SCSI] aacraid: fib context lock for management ioctls [SCSI] ch: remove forward declarations [SCSI] ch: fix device minor number management bug [SCSI] ch: handle class_device_create failure properly [SCSI] NCR5380: fix section mismatch [SCSI] sg: fix /proc/scsi/sg/devices when no SCSI devices [SCSI] IB/iSER: add logical unit reset support [SCSI] don't use __GFP_DMA for sense buffers if not required [SCSI] use dynamically allocated sense buffer [SCSI] scsi.h: add macro for enclosure bit of inquiry data [SCSI] sd: add fix for devices with last sector access problems [SCSI] fix pcmcia compile problem [SCSI] aacraid: add Voodoo Lite class of cards. [SCSI] aacraid: add new driver features flags [SCSI] qla2xxx: Update version number to 8.02.00-k7. [SCSI] qla2xxx: Issue correct MBC_INITIALIZE_FIRMWARE command. ...
2008-01-25Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: (67 commits) fix drivers/ata/sata_fsl.c double-decl [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof() pata_legacy: Merge winbond support ata_generic: Cenatek support pata_winbond: error return pata_serverworks: Fix cable types and cosmetics pata_mpc52xx: remove un-needed assignment libata: fix off-by-one in error categorization ahci: factor out AHCI enabling and enable AHCI before reading CAP ata_piix: implement SIDPR SCR access ata_piix: convert to prepare - activate initialization libata: factor out ata_pci_activate_sff_host() from ata_pci_one() [libata] Prefer SCSI_SENSE_BUFFERSIZE to sizeof() pata_legacy: resychronize with upstream changes and resubmit [libata] pata_legacy: typo fix [libata] pata_winbond: update for new ->data_xfer hook pata_pcmcia: convert to new data_xfer prototype libata annotations and fixes libata: use dev_driver_string() instead of "libata" in libata-sff.c ata_piix: kill unused constants and flags ...
2008-01-25[SCSI] libsas: abstract STP task status into a functionJames Bottomley
Break out the frame processor for STP tasks from aic94xx so they can be shared by other SAS HBA's Original patch from Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-24Driver core: change sysdev classes to use dynamic kobject namesKay Sievers
All kobjects require a dynamically allocated name now. We no longer need to keep track if the name is statically assigned, we can just unconditionally free() all kobject names on cleanup. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2008-01-23[SCSI] aic7xxx_old, eata_pio, ips, libsas: don't zero out sense_buffer in ↵FUJITA Tomonori
queuecommand LLDs don't need to zero out scsi_cmnd::sense_buffer in queuecommand since scsi-ml does. This is a preparation of the future changes to allocate the sense_buffer only when necessary. Many LLDs zero out the sense_buffer before touching it on the error case. This patch lets them alone for now because new APIs for them would be added later on. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: "Salyzyn, Mark" <Mark_Salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23[SCSI] libsas: fix sense_buffer overrunFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-23libata: convert to chained sgTejun Heo
libata used private sg iterator to handle padding sg. Now that sg can be chained, padding can be handled using standard sg ops. Convert to chained sg. * s/qc->__sg/qc->sg/ * s/qc->pad_sgent/qc->extra_sg[]/. Because chaining consumes one sg entry. There need to be two extra sg entries. The renaming is also for future addition of other extra sg entries. * Padding setup is moved into ata_sg_setup_extra() which is organized in a way that future addition of other extra sg entries is easy. * qc->orig_n_elem is unused and removed. * qc->n_elem now contains the number of sg entries that LLDs should map. qc->mapped_n_elem is added to carry the original number of mapped sgs for unmapping. * The last sg of the original sg list is used to chain to extra sg list. The original last sg is pointed to by qc->last_sg and the content is stored in qc->saved_last_sg. It's restored during ata_sg_clean(). * All sg walking code has been updated. Unnecessary assertions and checks for conditions the core layer already guarantees are removed. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-23libata: rename ATA_PROT_ATAPI_* to ATAPI_PROT_*Tejun Heo
ATA_PROT_ATAPI_* are ugly and naming schemes between ATA_PROT_* and ATA_PROT_ATAPI_* are inconsistent causing confusion. Rename them to ATAPI_PROT_* and make them consistent with ATA counterpart. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2008-01-23libata: implement protocol testsTejun Heo
Implement protocol tests - ata_is_atapi(), ata_is_nodata(), ata_is_pio(), ata_is_dma(), ata_is_ncq() and ata_is_data() and use them to replace is_atapi_taskfile() and hard coded protocol tests. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2008-01-11[SCSI] libsas: don't use made up error codesJames Bottomley
This is bad for two reasons: 1. If they're returned to outside applications, no-one knows what they mean. 2. Eventually they'll clash with the ever expanding standard error codes. The problem error code in question is ETASK. I've replaced this by ECOMM (communications error on send) a network error code that seems to most closely relay what ETASK meant. Acked-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libsas: don't treat underrun as an error on SMP tasksJames Bottomley
All SMP tasks sent through bsg generate messages like: sas: smp_execute_task: task to dev 500605b000001450 response: 0x0 status 0x81 Three times (because the task gets retried). Firstly, don't retry either overrun or underrun (the data buffer isn't going to change size) and secondly, just report the underrun but don't set an error for it. This is necessary so bsg can report back the residual. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libsas: add host SMP processingJames Bottomley
This adds support for host side SMP processing, via a separate SMP interpreter file. Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libsas: Fix various sparse complaintsDarrick J. Wong
Annotate sas_queuecommand with locking details, and clean up a few more sparse warnings about static/non-static declarations. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2008-01-11[SCSI] libsas: Convert sas_proto users to sas_protocolDarrick J. Wong
sparse complains about the mixing of enums in libsas. Since the underlying numeric values of both enums are the same, combine them to get rid of the warning. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
2007-10-19Use helpers to obtain task pid in printksPavel Emelyanov
The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-12[libata] Remove ->port_disable() hookJeff Garzik
It was always set to ata_port_disable(). Removed the hook, and replaced the very few ap->ops->port_disable() callsites with direct calls to ata_port_disable(). Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-10-12libata-link: introduce ata_linkTejun Heo
Introduce ata_link. It abstracts PHY and sits between ata_port and ata_device. This new level of abstraction is necessary to support SATA Port Multiplier, which basically adds a bunch of links (PHYs) to a ATA host port. Fields related to command execution, spd_limit and EH are per-link and thus moved to ata_link. This patch only defines the host link. Multiple link handling will be added later. Also, a lot of ap->link derefences are added but many of them will be removed as each part is converted to deal directly with ata_link instead of ata_port. This patch introduces no behavior change. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-07-31[SCSI] libsas: fix build dependencies on libataJames Bottomley
If you have the libsas with ATA support, it needs libata to function. The problem is that if you compile in libsas, you can't build libata as a module (however, vice versa you can). Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-28[SCSI] libsas: Fix potential NULL dereference in sas_smp_get_phy_events()Jesper Juhl
In sas_smp_get_phy_events() we never test if the call to alloc_smp_req(RPEL_REQ_SIZE) succeeds or fails. That means we run the risk of dereferencing a NULL pointer if it does fail. Far better to test if we got NULL back and in that case return -ENOMEM just as we already do for the other memory allocation in that function. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-26[SCSI] libsas: Remove PCI dependenciesJeff Garzik
Eliminate unnecessary PCI dependencies in libsas. It should use generic DMA and struct device like other subsystems. Signed-off-by: Jeff Garzik <jeff@garzik.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-24[SCSI] libsas: SMP request handler shouldn't crash when rphy is NULLDarrick J. Wong
sas_smp_handler crashes when smp utils are used with an aic94xx host because certain devices (the sas_host itself, specifically) lack rphy structures. No rphy means no SMP target support, but we shouldn't crash here. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-22Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (60 commits) [SCSI] libsas: make ATA functions selectable by a config option [SCSI] bsg: unexport sg v3 helper functions [SCSI] bsg: fix bsg_unregister_queue [SCSI] bsg: make class backlinks [SCSI] 3w-9xxx: add support for 9690SA [SCSI] bsg: fix bsg_register_queue error path [SCSI] ESP: Increase ESP_BUS_TIMEOUT to 275. [SCSI] libsas: fix scr_read/write users and update the libata documentation [SCSI] mpt fusion: update Kconfig help [SCSI] scsi_transport_sas: add destructor for bsg [SCSI] iscsi_tcp: buggered kmalloc() [SCSI] qla2xxx: Update version number to 8.02.00-k2. [SCSI] qla2xxx: Add ISP25XX support. [SCSI] qla2xxx: Use pci_try_set_mwi(). [SCSI] qla2xxx: Use PCI-X/PCI-Express read control interfaces. [SCSI] qla2xxx: Re-factor isp_operations to static structures. [SCSI] qla2xxx: Validate mid-layer 'underflow' during check-condition handling. [SCSI] qla2xxx: Correct setting of 'current' and 'supported' speeds during FDMI registration. [SCSI] qla2xxx: Generalize iIDMA support. [SCSI] qla2xxx: Generalize FW-Interface-2 support. ...
2007-07-22[SCSI] libsas: make ATA functions selectable by a config optionJames Bottomley
Not everyone wants libsas automatically to pull in libata. This patch makes the behaviour configurable, so you can build libsas with or without ATA support. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20[SCSI] libsas: fix scr_read/write users and update the libata documentationJames Bottomley
This fixes up the usage in libsas (which are easy to miss, since they're only in the scsi-misc tree) ... and also corrects the documentation on the point of what these two function pointers actually return. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-20mm: Remove slab destructors from kmem_cache_create().Paul Mundt
Slab destructors were no longer supported after Christoph's c59def9f222d44bb7e2f0a559f2906191a0862d7 change. They've been BUGs for both slab and slub, and slob never supported them either. This rips out support for the dtor pointer from kmem_cache_create() completely and fixes up every single callsite in the kernel (there were about 224, not including the slab allocator definitions themselves, or the documentation references). Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-07-18[SCSI] libsas: kill unused smp_portal codeFUJITA Tomonori
Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] libsas: add SAS management protocol handlerFUJITA Tomonori
This patch adds support for SAS Management Protocol (SMP) passthrough support via bsg. aic94xx can use this. Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] libsas: fix lockdep issue with ATAJames Bottomley
lockdep noticed that with ATA support the port->dev_list_lock was entangled at irq context, so it now needs to become IRQ safe Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] libsas, aic94xx: fix dma mapping cockups with ATAJames Bottomley
This one was noticed by Gilbert Wu of Adaptec: The libata core actually does the DMA mapping for you, so there has to be an exception in the device drivers that *don't* do dma mapping for ATA commands. However, since we've already done this, libsas must now dma map any ATA commands that it wishes to issue ... and yes, this is a horrible mess. Additionally, the test in aic94xx for ATA protocols isn't quite right. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] sas_ata: Implement sas_task_abort for ATA devicesDarrick J. Wong
ATA devices need special handling for sas_task_abort. If the ATA command came from SCSI, then we merely need to tell SCSI to abort the scsi_cmnd. However, internal commands require a bit more work--we need to fill the qc with the appropriate error status and complete the command, and eventually post_internal will issue the actual ABORT TASK. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] sas_ata: Assign sas_task to scsi_cmnd to enable EH for ATA devicesDarrick J. Wong
The SATL should connect the scsi_cmnd to the sas_task (despite the presence of libata) so that requests to abort scsi_cmnds headed to the ATA device can be processed by the EH and aborted correctly. The abort status should still be propagated from sas -> ata -> scsi. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] libsas: Unknown STP devices should be reported to libata as unknown.Darrick J. Wong
When libsas encounters a STP device whose protocol isn't recognized (i.e. not ATA or ATAPI), we should set the ata_device's class to ATA_DEV_UNKNOWN instead of ATA_DEV_ATA. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] libsas: Accept SAM_GOOD for ATAPI devices in sas_ata_task_doneDarrick J. Wong
A sas_task sent to an ATAPI devices returns SAM_GOOD if successful. Therefore, we should treat this the same way we treat ATA commands that succeed. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] sas_ata: Don't copy aic94xx's sactive to ata_portDarrick J. Wong
Since the aic94xx sequencer assigns its own NCQ tags to ATA commands, it no longer makes any sense to copy the sactive field in the STP response to ata_port->sactive, as that will confuse libata. Also, libata seems to be capable of managing sactive on its own. The attached patch gets rid of one of the causes of the BUG messages in ata_qc_new, and seems to work without problems on an IBM x206m. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] sas_ata: ata_post_internal should abort the sas_taskDarrick J. Wong
This patch adds a new field, lldd_task, to ata_queued_cmd so that libata users such as libsas can associate some data with a qc. The particular ambition with this patch is to associate a sas_task with a qc; that way, if libata decides to timeout a command, we can come back (in sas_ata_post_internal) and abort the sas task. One question remains: Is it necessary to reset the phy on error, or will the libata error handler take care of it? (Assuming that one is written, of course.) This patch, as it is today, works well enough to clean things up when an ATA device probe attempt fails halfway through the probe, though I'm not sure this is always the right thing to do. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] sas_ata: sas_ata_qc_issue should return AC_ERR_*Darrick J. Wong
The sas_ata_qc_issue function was incorrectly written to return error codes such as -ENOMEM. Since libata OR's qc->err_mask with the return value, It is necessary to make my code return one of the AC_ERR_ codes instead. For now, use AC_ERR_SYSTEM because an error here means that the OS couldn't send the command to the controller. If anybody has a suggestion for a better AC_ERR_ code to use, please suggest it. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] sas_ata: Satisfy libata qc function locking requirementsDarrick J. Wong
ata_qc_complete and ata_sas_queuecmd require that the port lock be held when they are called. sas_ata doesn't do this, leading to BUG messages about qc tags newly allocated qc tags already being in use. This patch fixes the locking, which should clean up the rest of those messages. So far I've tested this against an IBM x206m with two SATA disks with no BUG messages and no other signs of things going wrong, and the machine finally passed the pounder stress test. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] Migrate libsas ATA code into a separate fileDarrick J. Wong
This is a respin of my earlier patch that migrates the ATA support code into a separate file. For now, the controversial linking bits have been removed per James Bottomley's request for a patch that contains only the migration diffs, which means that libsas continues to require libata. I intend to address that problem in a separate patch. This patch is against the aic94xx-sas-2.6 git tree, and it has been sanity tested on my x206m with Seagate SATA and SAS disks without uncovering any new problems. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] libsas: fixup NCQ for SATA disksJames Bottomley
We actually had two problems: the one with the tag (which is fixed by zeroing the tag before sending the taskfile to the sequencer) but the other with the fact that we sent our first NCQ command to the device before the sequencer had been informed of the NCQ tagging capabilities. I fixed the latter by moving the rphy_add() to the correct point in the code after the NCQ capabilities are set up. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] libsas: better error handling in sas_ex_discover_end_dev()James Bottomley
This replaces a few BUG_ON() statements with the correct failure error handling. There are still many more to do. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] aic94xx: add SATAPI supportJames Bottomley
It turns out this is fairly easy to plumb in by recognising the three command types and copying the CDB. The protocol response path needs to be amended to cope with SAS_PROTO_RESPONSE. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] libsas: support NCQ for SATA disksDarrick J. Wong
This patch adds SATAII NCQ support to libsas. Both the use_ncq and the dma_xfer flags in ata_task must be set for NCQ to work correctly on the Adaptec SAS controller. The rest of the patch adds ATA_FLAG_NCQ to sata_port_info and sets up ap->scsi_host so that ata_setup_ncq doesn't crash. Please note that this patch is against the aic94xx-sas git tree, not scsi-misc. Thanks also to James Bottomley for providing an earlier version of this patch from which to work. I've tested this patch on a x206m with a ST380819AS SATA2 disk plugged into the Adaptec SAS controller. The drive came up with a queue depth of 31, and I successfully ran an I/O flood test to coerce libata into sending multiple commands simultaneously. A kernel probe recorded the maximum tag number that had been seen before and after the flood test; before the test it was 2 and after it was 30, as I expected. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] libsas: fix up sas_smp_phy_control()James Bottomley
The prototype of this has changed for the link speed setting patch. Need to update the SATA use of this. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] libsas: Add SATA support to STP piece for SATA on SAS expandersJames Bottomley
This patch adds support for SATA over SAS expanders to the previous two SATA support in libsas patches. There were a couple of nasty non trivial things to sort out before this one could be made to work. Firstly, I'd like to thank Doug Gilbert for diagnosing a problem with the LSI expanders where the REPORT_SATA_PHY command was returning the D2H FIS in the wrong order (Although, here, I think I have to blame the SAS standards which specifies the FIS "shall be returned in little endian format" and later on "which means resp[24] shall be FIS type" The latter, of course, implying big endian format). Just to make sure, I put a check for the D2H FIS type being in the wrong position and reverse the FIS data if it is. The second is a problem outlined in Annex G of the SAS standard (again, a technical point with D2H FIS ... necessitating a phy reset on certain conditions). With the patch, I can now see my SATA-1 disk in a cascaded expander configuration. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-18[SCSI] Add SATA support to libsasDarrick J. Wong
Hook the scsi_host_template functions in libsas to delegate functionality to libata when appropriate. Signed-off-by: Darrick J. Wong <djwong@us.ibm.com> Misc code changes and merge fixes and update for libata->drivers/ata move Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-07-17Freezer: make kernel threads nonfreezable by defaultRafael J. Wysocki
Currently, the freezer treats all tasks as freezable, except for the kernel threads that explicitly set the PF_NOFREEZE flag for themselves. This approach is problematic, since it requires every kernel thread to either set PF_NOFREEZE explicitly, or call try_to_freeze(), even if it doesn't care for the freezing of tasks at all. It seems better to only require the kernel threads that want to or need to be frozen to use some freezer-related code and to remove any freezer-related code from the other (nonfreezable) kernel threads, which is done in this patch. The patch causes all kernel threads to be nonfreezable by default (ie. to have PF_NOFREEZE set by default) and introduces the set_freezable() function that should be called by the freezable kernel threads in order to unset PF_NOFREEZE. It also makes all of the currently freezable kernel threads call set_freezable(), so it shouldn't cause any (intentional) change of behaviour to appear. Additionally, it updates documentation to describe the freezing of tasks more accurately. [akpm@linux-foundation.org: build fixes] Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> Acked-by: Nigel Cunningham <nigel@nigel.suspend2.net> Cc: Pavel Machek <pavel@ucw.cz> Cc: Oleg Nesterov <oleg@tv-sign.ru> Cc: Gautham R Shenoy <ego@in.ibm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>