aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/lpfc
AgeCommit message (Collapse)Author
2005-12-13[SCSI] lpfc 8.1.1 : Change version number to 8.1.1James.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : kill use of pci_read_config_xxxJames.Smart@Emulex.Com
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Added code to adjust lun queue depth to avoid target ↵James.Smart@Emulex.Com
overloading Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Add polled-mode supportJames.Smart@Emulex.Com
- Add functionality to run in polled mode only. Includes run time attribute to enable mode. - Enable runtime writable hba settings for coallescing and delay parameters Customers have requested a mode in the driver to run strictly polled. This is generally to support an environment where the server is extremely loaded and is looking to reclaim some cpu cycles from adapter interrupt handling. This patch adds a new "poll" attribute, and the following behavior: if value is 0 (default): The driver uses the normal method for i/o completion. It uses the firmware feature of interrupt coalesing. The firmware allows a minimum number of i/o completions before an interrupt, or a maximum time delay between interrupts. By default, the driver sets these to no delay (disabled) or 1 i/o - meaning coalescing is disabled. Attributes were provided to change the coalescing values, but it was a module-load time only and global across all adapters. This patch allows them to be writable on a per-adapter basis. if value is 1 : Interrupts are left enabled, expecting that the user has tuned the interrupt coalescing values. When this setting is enabled, the driver will attempt to service completed i/o whenever new i/o is submitted to the adapter. If the coalescing values are large, and the i/o generation rate steady, an interrupt will be avoided by servicing completed i/o prior to the coalescing thresholds kicking in. However, if the i/o completion load is high enough or i/o generation slow, the coalescion values will ensure that completed i/o is serviced in a timely fashion. if value is 3 : Turns off FCP i/o interrupts altogether. The coalescing values now have no effect. A new attribute "poll_tmo" (default 10ms) exists to set the polling interval for i/o completion. When this setting is enabled, the driver will attempt to service completed i/o and restart the interval timer whenever new i/o is submitted. This behavior allows for servicing of completed i/o sooner than the interval timer, but ensures that if no i/o is being issued, then the interval timer will kick in to service the outstanding i/o. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Bring model descriptions in sync with Emulex standard ↵James.Smart@Emulex.Com
generic names Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Add support for more members of the Light Pulse 11xxx ↵James.Smart@Emulex.Com
(4Gb) family Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Fixes to error handlersJames.Smart@Emulex.Com
- Release task management command before counting outstanding commands. TMF was being erroneously counted as an active outstanding command. - Serialize EH calls and block requests when EH function is running. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Remove locking wrappers around error handlersJames.Smart@Emulex.Com
Remove locking wrappers around error handlers. Wrappers were added in early 2.6.13 api change Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Adjust use of scsi_block_requests and interaction w/ FC ↵James.Smart@Emulex.Com
transport - Remove unnecessary scsi_block_requests calls on rport deletes. This was deadlocking the sdev removals as they wanted to flush commands. - No longer block requests when adding the remote port (to block discovery). Instead, register, then change port role. Maps to Qlogic behavior, and closer to the register-node-upon-first-ELS behavior. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Fixes for short cable pullsJames.Smart@Emulex.Com
Cause: Link bounces were causing discovery ELS's to be killed. Driver was not properly flushing ELS commands upon the subsequent link bounces. Thus, processing of ELS post link bounce erroneously assumed discovery failure and device loss. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1 : Correct some 8bit to 16bit field conversions/comparisonsJames.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-12-13[SCSI] lpfc 8.1.1: Miscellaneous CleanupsJames.Smart@Emulex.Com
Miscellaneous Cleanups: - Remove ProgType READ_REV mailbox command value check in lpfc_config_port_prep. - Convert simple printk to an lpfc_printf_log in queuecommand. - Modify lpfc_abort_handler message 0749 to display more accurate text and data. - Minor style cleanup: fix 3 long lines in lpfc_hw.h Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-11-10[PATCH] lpfc build fixJeff Garzik
Current upstream 'allmodconfig' build is broken. This is the obvious patch... Signed-off-by: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] kfree cleanup: drivers/scsiJesper Juhl
This is the drivers/scsi/ part of the big kfree cleanup patch. Remove pointless checks for NULL prior to calling kfree() in drivers/scsi/. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Acked-by: Kai Makisara <kai.makisara@kolumbus.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-11-07[PATCH] drivers/scsi: fix-up schedule_timeout() usageNishanth Aravamudan
Use schedule_timeout_uninterruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-29[SCSI] lpfc: Change version number to 8.1.0James.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc 8.1.0 : Add owner field to struct pci_driverJames.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Fix eh_ return codes for commandsJames.Smart@Emulex.Com
Return FAILED from eh_ routines if command(s) is(are) not completed There were scenarios where we may have returned from the error handlers prior to all affected commands being flushed to the midlayer. Add changes to ensure this doesn't happen. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Remove unneeded IOCB_t * castJames.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Adjust lpfc_scsi_buf allocationJames.Smart@Emulex.Com
Adjust lpfc_scsi_buf allocation to account for lun_queue_depth and error handling Under high load and high duress, the error handler could steal some command resources from the normal i/o path. Rework to allocate additional resources to avoid this scneario. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Replace lpfc_sli_issue_iocb_wait_high_priorityJames.Smart@Emulex.Com
Replace lpfc_sli_issue_iocb_wait_high_priority with lpfc_sli_issue_iocb_wait. Simplify code paths, as there really wasn't a "priority" Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Fix for "command completion for iotax x?? not found"James Bottomley
From: James Smart <James.Smart@emulex.com> There were scenarios where the error handlers could reuse an iotag value of an active io. Remove all possibility of this by pre-assigning iotag resources to command resources. Signed-off-by: James Smart <James.Smart@emulex.com> Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Remove RPI hash from the driverJames.Smart@Emulex.Com
Table was not providing a lot of value and injected a couple of errors. Removed it and made functionality inline. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Restore HEX safe bahavior of the sysfs xxx_store functions.James.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Fix for "Unknown IOCB command Data: x0 x3 x0 x0"James.Smart@Emulex.Com
Fix for "Unknown IOCB command Data: x0 x3 x0 x0" messages and inability to see devices On some platforms, the host-memory based ring mgmt area was not zero. Also, driver wasn't manipulating the entire 32bits of the ring pointers. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Fix comments for nodev_tmoJames.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Add range checking for attributes passed as options at load time.James.Smart@Emulex.Com
Reuse macros defined for sysfs store callbacks in the initialization code in order to enforce the same range checking. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Return -EINVAL, -EPERM, and -EIO instead of 0 from sysfs callbacksJames.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Update to Emulex hba model namesJames.Smart@Emulex.Com
Update adapter names to match Emulex naming conventions. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-29[SCSI] lpfc: Cleanup code in lpfc_get_stats().James.Smart@Emulex.Com
Cleanup white spaces in argument calls & initializations, prune if statements, remove casting and remove redundant if checks. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] update fc_transport for removal of block/unblock functionsJames.Smart@Emulex.Com
We recently went back to implement a board reset. When we perform the reset, we wanted to tear down the internal data structures and rebuild them. Unfortunately, when it came to the rport structure, things were odd. If we deleted them, the scsi targets and sdevs would be torn down. Not a good thing for a temporary reset. We could block the rports, but we either maintain the internal structures to keep the rport reference (perhaps even replicating what's in the transport), or we have to fatten the fc transport with new search routines to find the rport (and deal with a case of a dangling rport that the driver forgets). It dawned on me that we had actually reached this state incorrectly. When the fc transport first started, we did the block/unblock first, then added the rport interface. The purpose of block/unblock is to hide the temporary disappearance of the rport (e.g. being deleted, then readded). Why are we making the driver do the block/unblock ? We should be making the transport have only an rport add/delete, and the let the transport handle the block/unblock. So... This patch removes the existing fc_remote_port_block/unblock functions. It moves the block/unblock functionality into the fc_remote_port_add/delete functions. Updates for the lpfc driver are included. Qlogic driver updates are also enclosed, thanks to the contributions of Andrew Vasquez. [Note: the qla2xxx changes are relative to the scsi-misc-2.6 tree as of this morning - which does not include the recent patches sent by Andrew]. The zfcp driver does not use the block/unblock functions. One last comment: The resulting behavior feels very clean. The LLDD is concerned only with add/delete, which corresponds to the physical disappearance. However, the fact that the scsi target and sdevs are not immediately torn down after the LLDD calls delete causes an interesting scenario... the midlayer can call the xxx_slave_alloc and xxx_queuecommand functions with a sdev that is at the location the rport used to be. The driver must validate the device exists when it first enters these functions. In thinking about it, this has always been the case for the LLDD and these routines. The existing drivers already check for existence. However, this highlights that simple validation via data structure dereferencing needs to be watched. To deal with this, a new transport function, fc_remote_port_chkready() was created that LLDDs should call when they first enter these two routines. It validates the rport state, and returns a scsi result which could be returned. In addition to solving the above, it also creates consistent behavior from the LLDD's when the block and deletes are occuring. Rejections fixed up and Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[SCSI] Add an 'Issue LIP' device attribute in fc_transport classAndrew Vasquez
Ok, here's a patch to add such a common API for fc transport users. Relevant LLD changes (lpfc and qla2xxx) also present. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-10-28[PATCH] gfp_t: drivers/scsiAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-21[SCSI] lpfc build fixAndrew Morton
gcc-2.95.x doesn't do anonymous unions. Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-09-10[SCSI] lpfc: use wwn_to_u64() transport helperAndrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Acked-by: Smart, James <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12[SCSI] lpfc driver 8.0.30 : update version to 8.0.30James.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12[SCSI] lpfc driver 8.0.30 : convert to use of int_to_scsilun()James.Smart@Emulex.Com
Replace use of lpfc_put_lun with midlayer's int_to_scsilun Remove driver's local definition of lpfc_put_lun (which converts an int back to a 64-bit LUN) and replace it's use with the recently added int_to_scsilun function provided by the midlayer. Note: Embedding midlayer structure in our structure caused need for more files to include midlayer headers. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12[SCSI] lpfc driver 8.0.30 : dev_loss and nodev timeoutsJames.Smart@Emulex.Com
Fix handling of the dev_loss and nodev timeouts. Symptoms: when remote port disappears for a period of time longer then either nodev_tmo or dev_loss_tmo, the lpfc driver worker thread will stall removing that remote port. Cause: removing remote port involves un-blocking and sync-ing corresponding block device queue. But corresponding node in the lpfc driver is still in the NPR(?node port recovery?) state and mid-layer gets SCSI_MLQUEUE_HOST_BUSY as a return value when it is trying to call queuecommand() with command for that node (AKA remote port) Fix: Instead of returning SCSI_MLQUEUE_HOST_BUS from queuecommand() for nodes in NPR states complete it with retry-able error code DID_BUS_BUSY Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12[SCSI] lpfc driver 8.0.30 : fix get_stats panicJames.Smart@Emulex.Com
Fix panic in lpfc_get_stats() Symptoms: Panic on sysfs stats access Cause: In lpfc_get_stats() we are writing to memory that we do not own. Fix: Fix our stats structure allocation. Embed phba->link_stats in struct lpfc_hba and stop treating it like rogue structure. Note: Embedding midlayer/transport structure in our structure caused need for more files to include midlayer/transport headers. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12[SCSI] lpfc driver 8.0.30 : task mgmt bit clearingJames.Smart@Emulex.Com
Clear task management bits when preparing SCSI commands In lpfc_scsi_prep_cmnd, clear the task management bits (fcpCntl2 member in the fcp_cmd structure) when preparing regular SCSI commands. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12[SCSI] lpfc driver 8.0.30 : fix lip/cablepull panicJames.Smart@Emulex.Com
Fix panic on lip and cable pull Symptoms: Panic on lip or cable pull Cause: Use after free of nlp in lpfc_nlp_remove() Fix: Do not make FC transport calls after a node is removed. Transport calls are disabled by ignoring the initial delete transition. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-08-12[SCSI] lpfc driver 8.0.30 : fix iocb reuse initializationJames.Smart@Emulex.Com
IOCB BDE not getting fully initialized during reuse Symptoms: Driver gets Status 3 and Reason 0x13 on IOCB completions. Cause: The IOCB bpl.bdeSize and bdeFlags are not getting initialized on reuse. Fix: Reinitialize these fields in prep_dma each time an IOCB is used. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-27[PATCH] turn many #if $undefined_string into #ifdef $undefined_stringOlaf Hering
turn many #if $undefined_string into #ifdef $undefined_string to fix some warnings after -Wno-def was added to global CFLAGS Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-07-02[SCSI] lpfc: Change version to 8.0.29.James.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Update copyright noticesJames.Smart@Emulex.Com
Update copyright notice text and include year 2005. Add Copyright notice for Christoph Hellwig to several files: lpfc.h lpfc_attr.c lpfc_els.c lpfc_hbadisc.c lpfc_init.c lpfc_mbox.c lpfc_mem.c lpfc_nportdisc.c lpfc_scsi.c lpfc_sli.c Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Remove $Id$ keyword strings.James.Smart@Emulex.Com
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fix ADISC completion incorrectly putting initiators on mapped listJames.Smart@Emulex.Com
Symptom - An unmapped node (initiator) that goes away in a situation such as cable pull, comes back as a mapped node. Fix - On ADISC completion, put a list on the mapped list only if it is a FCP_TARGET. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Add completion handler to the abort iocbsJames.Smart@Emulex.Com
Add completion handler to the abort iocbs to close a hole where we could reuse an iotag. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Fix LS_RJT never sent by lpfc_els_unsol_event()James.Smart@Emulex.Com
lpfc_els_unsol_event() checks rjt_err to determine is LS_RJT should be sent. However, rjt_err was set to LSEXP_NOTHING_ELSE (which is 0) in cases where an LS_RJT should be sent, so rjt_err was never true. Change lpfc_els_unsol_event() to set rjt_err to 1 when LS_RJT should be sent. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2005-07-02[SCSI] lpfc: Add LP6000 PCI IDJames.Smart@Emulex.Com
Fix driver not seeing LP6000. Fix: add PCI id to the pci_device_id table and a short description for the HBA in get_hba_model_desc(). Also add a default clause to the switch statement that parses the various PCI ID's. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>