aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/lpfc
AgeCommit message (Collapse)Author
2007-05-05Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (87 commits) [SCSI] fusion: fix domain validation loops [SCSI] qla2xxx: fix regression on sparc64 [SCSI] modalias for scsi devices [SCSI] sg: cap reserved_size values at max_sectors [SCSI] BusLogic: stop using check_region [SCSI] tgt: fix rdma transfer bugs [SCSI] aacraid: fix aacraid not finding device [SCSI] aacraid: Correct SMC products in aacraid.txt [SCSI] scsi_error.c: Add EH Start Unit retry [SCSI] aacraid: [Fastboot] Panics for AACRAID driver during 'insmod' for kexec test. [SCSI] ipr: Driver version to 2.3.2 [SCSI] ipr: Faster sg list fetch [SCSI] ipr: Return better qc_issue errors [SCSI] ipr: Disrupt device error [SCSI] ipr: Improve async error logging level control [SCSI] ipr: PCI unblock config access fix [SCSI] ipr: Fix for oops following SATA request sense [SCSI] ipr: Log error for SAS dual path switch [SCSI] ipr: Enable logging of debug error data for all devices [SCSI] ipr: Add new PCI-E IDs to device table ...
2007-04-01[SCSI] lpfc: fix oops when parsing dodgy VPDAnton Blanchard
We have seen two cases where VPD on an emulex card has been incorrect and we end up walking off the end of memory. It looks like someone made an update (increased the length of a string) without increasing the Length field. Then we do: Length -= (3+i); And since Length is unsigned it becomes very large and we loop forever in the encapsulating: while (Length > 0) { If we make Length signed then we fall out of the loop and proceed on. Its important to note we have only seen this in the lab and it may be the only two cases of this in existence, but since the rest of the code has been written to be resilient against bad VPD we may as well fix this too. Signed-off-by: Anton Blanchard <anton@samba.org> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-03-11[SCSI] lpfc: avoid double-free during PCI error failureLinas Vepstas
If a PCI error is detected that cannot be recovered from, there will be a double call of lpfc_pci_remove_one(), with the second call resulting in a null-pointer dereference. The first call occurs in lpfc_io_error_detected(), and the second call during pci device remove. This patch eliminates the first call; its un-needed. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-02-16[SCSI] lpfc: add PCI error recovery supportLinas Vepstas
This patch adds PCI Error recovery support to the Emulex Lightpulse Fibrechannel (lpfc) SCSI device driver. Lightly tested at this point, works. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Acked-by: Bino.Sebastian@Emulex.Com Acked-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-01-06[SCSI] scsi: lpfc error path fixMariusz Kozlowski
Add kmalloc failure check and fix the loop on error path. Without the patch pool element at index [0] will not be freed. Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Change version number to 8.1.11James Smart
Change version number to 8.1.11 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Misc FixesJames Smart
Misc Fixes: - Prevent references to NULL node list element in reset routines. - Add missing IOCB types to switch tables - Reset the card on Port Error 5 - Fix infinite loop in LUN reset Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Add soft_wwnn sysfs attribute, rename soft_wwn_enableJames Smart
The driver now allows both wwpn and wwnn to be set. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Removed decoding of PCI Subsystem IdJames Smart
To avoid continually updating the driver for new subsystem ids (as adapter modules are proliferating), remove this 2nd level decode. Genericize the reported Adapter names to be consistent across Emulex product line. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Add MSI (Message Signalled Interrupts) supportJames Smart
Add MSI (Message Signalled Interrupts) support Actual use must be enabled via the new module parameter "lpfc_use_msi" Defaults to no use Many thanks to Frederic Temporelli who implemented the initial patch. Signed-off-by: Frederic Temporelli <frederic.temporelli@ext.bull.net> Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Adjust LOG_FCP loggingJames Smart
Adjust LOG_FCP logging to be more meaningful. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Fix Memory leaksJames Smart
Fix Memory leaks associated with mbox cmds READ_LA, READ_SPARAM, REG_LOGIN Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Fix lpfc_multi_ring_supportJames Smart
It was not accounted for in the fast/slow rings. Genericize the implementation and control it via sysfs Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-12-03[SCSI] lpfc 8.1.11 : Discovery FixesJames Smart
Discovery Fixes: - Prevent starting discovery of a node if discovery is in progress. - Code improvement (reduction) for lpfc_findnode_did(). - Update discovery to send RFF to Fabric on link up - Bypass unique WWN checks for fabric addresses - Add ndlp to plogi list prior to issuing the plogi els command Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-30[PATCH] lockdep: annotate DECLARE_WAIT_QUEUE_HEADPeter Zijlstra
kernel: INFO: trying to register non-static key. kernel: the code is fine but needs lockdep annotation. kernel: turning off the locking correctness validator. kernel: [<c04051ed>] show_trace_log_lvl+0x58/0x16a kernel: [<c04057fa>] show_trace+0xd/0x10 kernel: [<c0405913>] dump_stack+0x19/0x1b kernel: [<c043b1e2>] __lock_acquire+0xf0/0x90d kernel: [<c043bf70>] lock_acquire+0x4b/0x6b kernel: [<c061472f>] _spin_lock_irqsave+0x22/0x32 kernel: [<c04363d3>] prepare_to_wait+0x17/0x4b kernel: [<f89a24b6>] lpfc_do_work+0xdd/0xcc2 [lpfc] kernel: [<c04361b9>] kthread+0xc3/0xf2 kernel: [<c0402005>] kernel_thread_helper+0x5/0xb Another case of non-static lockdep keys; duplicate the paradigm set by DECLARE_COMPLETION_ONSTACK and introduce DECLARE_WAIT_QUEUE_HEAD_ONSTACK. Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Greg KH <gregkh@suse.de> Cc: Markus Lidel <markus.lidel@shadowconnect.com> Acked-by: Ingo Molnar <mingo@elte.hu> Cc: Arjan van de Ven <arjan@infradead.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-25[SCSI] lpfc: fix printk format warningRandy Dunlap
Fix printk format warning: drivers/scsi/lpfc/lpfc_attr.c:597: warning: long long unsigned int format, uint64_t arg (arg 4) Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-25[SCSI] lpfc: check before dereference in lpfc_ct.cEric Sesterhenn
If we fail to allocate mp->virt during the first while loop iteration, mlist is still uninitialized, therefore we should check if before dereferencing. Signed-off-by: Eric Sesterhenn <snakebyte@gmx.de> Acked-by: James Smart <James.Smart@Emulex.Com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-10-05IRQ: Maintain regs pointer globally rather than passing to IRQ handlersDavid Howells
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead of passing regs around manually through all ~1800 interrupt handlers in the Linux kernel. The regs pointer is used in few places, but it potentially costs both stack space and code to pass it around. On the FRV arch, removing the regs parameter from all the genirq function results in a 20% speed up of the IRQ exit path (ie: from leaving timer_interrupt() to leaving do_IRQ()). Where appropriate, an arch may override the generic storage facility and do something different with the variable. On FRV, for instance, the address is maintained in GR28 at all times inside the kernel as part of general exception handling. Having looked over the code, it appears that the parameter may be handed down through up to twenty or so layers of functions. Consider a USB character device attached to a USB hub, attached to a USB controller that posts its interrupts through a cascaded auxiliary interrupt controller. A character device driver may want to pass regs to the sysrq handler through the input layer which adds another few layers of parameter passing. I've build this code with allyesconfig for x86_64 and i386. I've runtested the main part of the code on FRV and i386, though I can't test most of the drivers. I've also done partial conversion for powerpc and MIPS - these at least compile with minimal configurations. This will affect all archs. Mostly the changes should be relatively easy. Take do_IRQ(), store the regs pointer at the beginning, saving the old one: struct pt_regs *old_regs = set_irq_regs(regs); And put the old one back at the end: set_irq_regs(old_regs); Don't pass regs through to generic_handle_irq() or __do_IRQ(). In timer_interrupt(), this sort of change will be necessary: - update_process_times(user_mode(regs)); - profile_tick(CPU_PROFILING, regs); + update_process_times(user_mode(get_irq_regs())); + profile_tick(CPU_PROFILING); I'd like to move update_process_times()'s use of get_irq_regs() into itself, except that i386, alone of the archs, uses something other than user_mode(). Some notes on the interrupt handling in the drivers: (*) input_dev() is now gone entirely. The regs pointer is no longer stored in the input_dev struct. (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking. It does something different depending on whether it's been supplied with a regs pointer or not. (*) Various IRQ handler function pointers have been moved to type irq_handler_t. Signed-Off-By: David Howells <dhowells@redhat.com> (cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-04Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (54 commits) [SCSI] Initial Commit of qla4xxx [SCSI] raid class: handle component-add errors [SCSI] SCSI megaraid_sas: handle thrown errors [SCSI] SCSI aic94xx: handle sysfs errors [SCSI] SCSI st: fix error handling in module init, sysfs [SCSI] SCSI sd: fix module init/exit error handling [SCSI] SCSI osst: add error handling to module init, sysfs [SCSI] scsi: remove hosts.h [SCSI] scsi: Scsi_Cmnd convertion in aic7xxx_old.c [SCSI] megaraid_sas: sets ioctl timeout and updates version,changelog [SCSI] megaraid_sas: adds tasklet for cmd completion [SCSI] megaraid_sas: prints pending cmds before setting hw_crit_error [SCSI] megaraid_sas: function pointer for disable interrupt [SCSI] megaraid_sas: frame count optimization [SCSI] megaraid_sas: FW transition and q size changes [SCSI] qla2xxx: Update version number to 8.01.07-k2. [SCSI] qla2xxx: Stall mid-layer error handlers while rport is blocked. [SCSI] qla2xxx: Add MODULE_FIRMWARE tags. [SCSI] qla2xxx: Add support for host port state FC transport attribute. [SCSI] qla2xxx: Add support for fabric name FC transport attribute. ...
2006-10-02[PATCH] namespaces: utsname: use init_utsname when appropriateSerge E. Hallyn
In some places, particularly drivers and __init code, the init utsns is the appropriate one to use. This patch replaces those with a the init_utsname helper. Changes: Removed several uses of init_utsname(). Hope I picked all the right ones in net/ipv4/ipconfig.c. These are now changed to utsname() (the per-process namespace utsname) in the previous patch (2/7) [akpm@osdl.org: CIFS fix] Signed-off-by: Serge E. Hallyn <serue@us.ibm.com> Cc: Kirill Korotaev <dev@openvz.org> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Herbert Poetzl <herbert@13thfloor.at> Cc: Andrey Savochkin <saw@sw.ru> Cc: Serge Hallyn <serue@us.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-09-26[SCSI] lpfc: don't free mempool if mailbox is busyJames Smart
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04[SCSI] lpfc 8.1.10 : Change version number to 8.1.10James Smart
Change version number to 8.1.10 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04[SCSI] lpfc 8.1.10 : Add support for new lpfc soft_wwpn attributeJames Smart
Add support for a new lpfc soft_wwpn sysfs attribute Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-04[SCSI] lpfc 8.1.10 : Add support for dev_loss_tmo_callbk and ↵James Smart
fast_io_fail_tmo_callbk Add support for new dev_loss_tmo callback Goodness is that it removes code for a parallel nodev timer that existed in the driver Add support for the new fast_io_fail callback Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] lpfc 8.1.10 : Add support to return adapter symbolic nameJames Smart
Add support to return adapter symbolic name (now that attribute is dynamic) Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-09-02[SCSI] lpfc 8.1.10 : Add support to post events via new FC event interfacesJames Smart
Add support to post events via new FC event interfaces Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] lpfc 8.1.9 : Change version number to 8.1.9James Smart
Change version number to 8.1.9 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] lpfc 8.1.9 : Stall eh handlers if resetting while rport blockedJames Smart
Stall error handler if attempting resets/aborts while an rport is blocked. This avoids device offline scenarios due to errors in the error handler. Background: Although the transport is using the scsi_timed_out functionality to restart the timeout if the rport is blocked, if the timeout has already fired before the block occurs, the eh handler still runs and can take the device offline. Ultimately, this window cannot be resolved without significant work in the error handler thread. Christoph noted the first level of these issues when he noted the poor error response handling by the error thread. We found, under heavy load and error testing, that time window from when the scsi_times_out() adds the io to the queue to when the scsi_error_handler gets around to servicing it, can be in the several seconds range. In most cases, these test conditions are highly unusual, but possible. As a result, we're stalling the error handler in this race window so that we can avoid the device_offline transitions. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-19[SCSI] lpfc 8.1.9 : Misc Bug FixesJames Smart
Misc Bug Fixes: - Cap MBX_DOWN_LINK command timeout to 60 seconds - Fix double free of ndlp object - Don't free mbox structures on error. The completion handlers expect to do so. - Clear host attention work items when going offline - Fixed discovery issues in multi-initiator environments. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] lpfc 8.1.7 : Change version number to 8.1.8James Smart
Change version number to 8.1.8 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] lpfc 8.1.7 : ID String and Message fixesJames Smart
ID String and Message fixes - Fix switch symbolic name registration to match cross-OS values - Replace printk's with more standard lpfc_printf_log calls - Make all lpfc_printf_log message numbers unique Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] lpfc 8.1.7 : Short bug fixesJames Smart
Short bug fixes: - Fix iocbq list corruption due to missing list_del's in ct handling - Missing unlock in lpfc_sli_next_iotag() - Fix initialization of can_queue value - Differentiate sysfs mailbox errors with different codes. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] lpfc 8.1.7 : Fix race condition between lpfc_sli_issue_mbox and ↵James Smart
lpfc_online Fix race condition between lpfc_sli_issue_mbox and lpfc_online Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] lpfc 8.1.7 : Fix failing firmware download due to mailbox delays ↵James Smart
needing to be longer Fix failing firmware download due to mailbox delays needing to be longer. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-08-06[SCSI] lpfc 8.1.7 : Add statistics reset callback for FC transportJames Smart
Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Change version number to 8.1.7James Smart
Change version number to 8.1.7 Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Misc FixesJames Smart
Misc Fixes: - Fix some sparse warnings - casts of address space - Fix handling of the adapter registration string. Each invocation was byteswapping, so every other adapter init attempt failed. - Correct comments and default value for the lpfc_max_luns parameter Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Add lpfc_sli_flush_mbox_queue() functionJames Smart
Add lpfc_sli_flush_mbox_queue() function and use it in lpfc_offline() call to avoid deadlock on thread block. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Correct the wait in attachment that delays for topology ↵James Smart
discovery Correct the wait in attachment that delays for topology discovery Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Remove depricated sysfs attribute board_onlineJames Smart
Remove depricated sysfs attribute board_online, as it's replaced by the new issue_reset attribute Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Adding new issue_reset sysfs attributeJames Smart
Adding new issue_reset sysfs attribute Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Fix panic in lpfc_sli_validate_fcp_iocbJames Smart
Fix panic in lpfc_sli_validate_fcp_iocb due to access of scsi_cmnd after returning it to the midlayer Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Consolidate dma buf cleanup into a separate functionJames Smart
Consolidate dma buf cleanup into a separate function Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Correct bogus nodev_tmo message on NPort that changes its ↵James Smart
NPort Id Correct bogus nodev_tmo message on NPort that changes its NPort Id Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Fix txcmplq related panics on heavy IO while downloading ↵James Smart
firmware Fix txcmplq related panics on heavy IO while downloading firmware Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Issue DOWN_LINK prior to INIT_LINK to work around link ↵James Smart
failure issue Issue DOWN_LINK prior to INIT_LINK to work around link failure issue Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Fixed infinite retry of REG_LOGIN mailbox failed due to ↵James Smart
MBXERR_RPI_FULL Fixed infinite retry of REG_LOGIN mailbox failed due to MBXERR_RPI_FULL Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Fix memory leak and cleanup code related to per ring ↵James Smart
lookup array Fix memory leak and cleanup code related to per ring lookup array. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Standardize the driver on a single define for the maximum ↵James Smart
supported targets Standardize the driver on a single define for the maximum supported targets. Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-07-09[SCSI] lpfc 8.1.7: Use mod_timer instead of add_timer in ↵James Smart
lpfc_els_timeout_handler Use mod_timer instead of add_timer in lpfc_els_timeout_handler This patch was formerly posted by Mark Haverkamp. http://marc.theaimsgroup.com/?l=linux-scsi&m=114246089015681&w=2 Signed-off-by: Mark Haverkamp <markh@osdl.org> Signed-off-by: James Smart <James.Smart@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>