aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/sata_sil.c
AgeCommit message (Collapse)Author
2006-06-12[PATCH] sata_sil: update device hotplug handling, take #2Tejun Heo
SIEN on some 3112 controllers doesn't mask SATA IRQ properly. IRQ stays asserted even after SIEN is masked and IRQ is acked. Also, even while frozen, any SATA PHY event including hardreset raises SATA IRQ. Clearing SError seems to be the only way to deassert SATA IRQ. This patch makes sil_host_intr() clear SError on SATA IRQs and ignore SATA IRQs reported while frozen so that hardreset doesn't trigger hotplug event (which ends up hardresetting again). In such cases, the port still gets re-frozen to minimize the danger of screaming interrupts. This results in one nil EH repeat on controllers with broken SIEN but other than that does no harm. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-06-12[PATCH] sata_sil: add controller unplug detection in sil_interrupt()Tejun Heo
Short-circuit interrupt handling if BMDMA2 is reported as 0xffffffff indicating device removal. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-31[PATCH] sata_sil: convert to new probing mechanism and add hotplug supportTejun Heo
Convert to new probing mechanism and add hotplug support by enabling SATA IRQ for SError.N, marking ehi for hotplug and scheduling EH on SATA IRQs. Sil3112/3512/3114 family of controllers use COMRESET as TF clearing point and can reliably wait for D2H FIS after COMRESET whether the FIS is the first D2H FIS after POR or in response to the COMRESET. Thus, setting ATA_FLAG_HRST_TO_RESUME is enough for device detection after hotplug. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31[PATCH] libata-hp: hook warmplugTejun Heo
Hook transportt->user_scan() and hostt->slave_destroy(). Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31[PATCH] sata_sil: new interrupt handlerTejun Heo
The DMA complete bit of these controllers reflects ATA IRQ status while no DMA command is in progress. So, we can tell whether the controller is raising an interrupt or not in deterministic manner. This patch gives sata_sil its own interrupt handler which behaves much better than the original one in terms of error detection and handling. This change is also necessary for later hotplug support. Further improvements are possible, in both 2 and 4 ports versions, we can get all status with only one readl and using custom bmdma operations can further cut down register accesses. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-31[PATCH] sata_sil: add new constants in preparation for new interrupt handlerTejun Heo
sata_sil is about to get a brand new interrupt handler. Add relevant constants. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-24[PATCH] PATCH: libata. Add ->data_xfer methodAlan Cox
We need to pass the device in order to do per device checks such as 32bit I/O enables. With the changes to include dev->ap we now don't have to add parameters however just clean them up. Also add data_xfer methods to the existing drivers except ata_piix (which is in the other block of patches). If you reject the piix one just add a data_xfer to it... Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-05-15[PATCH] sata_sil: convert to new EHTejun Heo
Convert sata_sil to new EH. As these controllers have hardware interrupt mask and are known to have screaming interrupts issues, use hardware IRQ masking for freezing. sil_freeze() masks interrupts for the port and sil_thaw() unmasks them. As ports are automatically frozen before probing reset, there is no need to initialize interrupt masks sil_init_onde(). Remove related code. Other than freezing, sata_sil uses stock BMDMA EH routines. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-05-15[PATCH] libata: use ATA printk helpersTejun Heo
Use ATA printk helpers. Signed-off-by: Tejun Heo <htejun@gmail.com>
2006-04-11Merge branch 'master'Jeff Garzik
Conflicts: drivers/scsi/libata-scsi.c include/linux/libata.h
2006-04-10[PATCH] move ->eh_strategy_handler to the transport classChristoph Hellwig
Overriding the whole EH code is a per-transport, not per-host thing. Move ->eh_strategy_handler to the transport class, same as ->eh_timed_out. Downside is that scsi_host_alloc can't check for the total lack of EH anymore, but the transition period from old EH where we needed it is long gone already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-04-02[libata] bump versionsJeff Garzik
2006-04-02[libata] kill bogus cut-n-pasted comments in three driversJeff Garzik
2006-04-01[PATCH] libata: implement ata_dev_enabled and disabled()Tejun Heo
This patch renames ata_dev_present() to ata_dev_enabled() and adds ata_dev_disabled(). This is to discern the state where a device is present but disabled from not-present state. This disctinction is necessary when configuring transfer mode because device selection timing must not be violated even if a device fails to configure. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[PATCH] libata: make per-dev transfer mode limits per-devTejun Heo
Now that each ata_device has xfer masks, per-dev limits can be made per-dev instead of per-port. Make per-dev limits per-dev. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-21[SCSI] libata: implement minimal transport template for ->eh_timed_outTejun Heo
SCSI midlayer has moved hostt->eh_timed_out to transport template. As libata doesn't need full-blown transport support yet, implement minimal transport for libata. No transport class or whatsoever, just empty transport template with ->eh_timed_out hook. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-05[PATCH] sata_sil: cosmetic flag/constant changesTejun Heo
Collect common host flags into SIL_DFL_HOST_FLAGS and add comments to constants. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] sata_sil: replace register address constants with sil_port[] entryTejun Heo
Kill SIL_FIFO_* and SIL_IDE2_BMDMA and replace them with proper sil_port[] entry. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] sata_sil: use kzallocTejun Heo
Use kzalloc instead of kmalloc/memset. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] sata_sil: replace sil_3112_m15w board id with sil_3112Tejun Heo
All 3112's have m15w. Replace sil_3112_m15w with sil_3112 and flag sil_3112 with SIL_FLAG_MOD15WRITE. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Carlos Pardo <Carlos.Pardo@siliconimage.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01[PATCH] sata_sil: remove unneeded ATA_FLAG_SRST from 3512 port infoTejun Heo
Now unneeded ATA_FLAG_SRST sneaked into sil_3512 port info while merging upstream-fixes. Kill it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-27Merge branch 'master'Jeff Garzik
2006-02-25[PATCH] sata_sil: implement R_ERR on DMA activate FIS errata fixTejun Heo
Silicon Image has disclosed a new sil3114/3152 errata and workaround which causes the controller to return R_ERR on DMA activate FIS if the FIS is received while the next PRD is being fetched. This patch implements the workaround. This errata results in lock up and doesn't trigger if m15w workaround is in effect. We stopped applying m15w to 3512 and 3114 in 2.6.14-rc1 which makes 3512/3114 lock up with some drives on all kernel versions since 2.6.14-rc1 upto now (2.6.16-rc4). This patch should fix the regression. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-25[PATCH] sata_sil: add board ID for 3512Tejun Heo
3512 is slightly different from 3112 errata-wise. Differentiate it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-20[PATCH] libata: rename ata_dev_id_[c_]string()Tejun Heo
This patch renames ata_dev_id_[c_]string() to ata_id_[c_]string(). All other functions which read data from ATA ID data start with ata_id and those two function names were getting too long. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12[PATCH] libata: kill sht->max_sectorsTejun Heo
The previous dev->max_sectors patch made sht->max_sectors meaningless. Kill all initializations of sht->max_sectors. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12[PATCH] libata: add per-device max_sectorsTejun Heo
If a low level driver wants to control max_sectors, it had to adjust ap->host->max_sectors and set ATA_DFLAG_LOCK_SECTORS to tell ata_scsi_slave_config not to override the limit. This is not only cumbersome but also incorrect for hosts which support more than one devices per port. This patch adds per-device ->max_sectors. If the field is unset (zero), libata core layer will adjust ->max_sectors according to default rules. If the field is set, libata honors the setting. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12[PATCH] libata: use ata_dev_id_c_string()Tejun Heo
Use ata_dev_id_c_string() Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10[PATCH] sata_sil: convert to new reset mechanismTejun Heo
Convert sata_sil to use new reset mechanism. sata_sil is fairly generic and can directly use std routine. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10[PATCH] libata: use ata_scsi_timed_out()Tejun Heo
Make all libata low level drivers use ata_scsi_timed_out(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-27[libata sata_sil] implement 'slow_down' module parameterJeff Garzik
On occasion, a user will submit a patch that enables the "mod15write" quirk for their device. Enabling this quirk has the effect of clamping all ATA commands to no more than 15 sectors. The intended use of this quirk is to stop the controller from generating FIS's of unusual size ("but Wesley, what about the FOUS's?"), which in turn works around problems in a <list> of hard drives. One side effect of this quirk is greatly decreased performance. Users often enable the mod15write quirk to fix various system, power, chip, and/or driver problems. For a few rare problematic cases, enabling this has cured lockups or data corruption. Rather than add bogus listings to the mod15write quirk list (I get a patch every month doing such), we add a 'slow_down' module parameter. This allows users to employ a performance sledgehammer in the hopes of curing a problem. It defaults to off (0), of course.
2006-01-06[BLOCK] update libata to use new blk_ordered for barriersTejun Heo
Reflect changes in SCSI midlayer and updated to use new ordered request implementation Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2005-12-01[PATCH] mark several libata datastructures constArjan van de Ven
Hi, the patch below marks several libata (and libata-driver) structures const so that they end up in the .rodata segment and don't false-share cachelines with things that get dirtied often. Signed-off-by: Arjan van de Ven <arjan@infradead.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-10[libata] constify PCI ID table in several driversJeff Garzik
2005-11-07[libata] eliminate use of drivers/scsi/scsi.h compatibility header/definesJeff Garzik
2005-10-30[libata] use dev_printk() throughout driversJeff Garzik
A few drivers were not following the standard meme of printing out their driver name and version at module load time; this is fixed as well.
2005-10-22libata: const-ification bombing runJeff Garzik
Enforce access rules where appropriate. If the compiler is smart enough, this may buy us an optimization or two as a side effect.
2005-10-21[PATCH] iomem annotations (sata_sil)Al Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-30[libata] update several drivers to use pci_iomap()/pci_iounmap()Jeff Garzik
2005-08-30[libata] __iomem annotations for various driversJeff Garzik
2005-08-29Merge /spare/repo/linux-2.6/Jeff Garzik
2005-08-28[libata] license change, other bitsJeff Garzik
- changes license of all code from OSL+GPL to plain ole GPL - except for NVIDIA, who hasn't yet responded about sata_nv - copyright holders were already contacted privately - adds info in each driver about where hardware/protocol docs may be obtained - where I have made major contributions, updated copyright dates
2005-08-26[libata sata_sil] list documentation URL, since its publicJeff Garzik
2005-08-23[PATCH] sil: apply M15W quirk selectively (take 2)Tejun Heo
As SII reports that only original 3112's are affected by M15W quirk, This patch adds SIL_FLAG_MOD15WRITE to selectively apply M15W quirk depending on chipsets. As of yet, we don't know exactly which PCI IDs are for original 3112, so M15W quirk is applied to all except for 3512 and 3124. Once more info is avaliable, we can change some of these sil_3112_m15w's to sil_3112. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-07-31libata: trim trailing whitespace.Jeff Garzik
Also, fixup a tabs-to-spaces block of code in ata_piix.
2005-06-09[PATCH] sata_sil: Fix FIFO PCI Bus Arbitration kernel oopsJens Axboe
Correct this. diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
2005-05-26libata: Fix use-after-iounmapJeff Garzik
Jens Axboe pointed out that the iounmap() call in libata was occurring too early, and some drivers (ahci, probably others) were using ioremap'd memory after it had been unmapped. The patch should address that problem by way of improving the libata driver API: * move ->host_stop() call after all ->port_stop() calls have occurred. * create default helper function ata_host_stop(), and move iounmap() call there. * add ->host_stop_prewalk() hook, use it in sata_qstor.c (hi Mark). sata_qstor appears to require the host-stop-before-port-stop ordering that existed prior to applying the attached patch.
2005-05-25[PATCH] sata_sil: new ID 1002:437A for ATI IXP400NAKAMURA Kenta
2005-04-16Linux-2.6.12-rc2Linus Torvalds
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!