aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi/sata_sil24.c
AgeCommit message (Collapse)Author
2006-04-10[PATCH] move ->eh_strategy_handler to the transport classChristoph Hellwig
Overriding the whole EH code is a per-transport, not per-host thing. Move ->eh_strategy_handler to the transport class, same as ->eh_timed_out. Downside is that scsi_host_alloc can't check for the total lack of EH anymore, but the transition period from old EH where we needed it is long gone already. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-24[libata] export ata_dev_pair; trim trailing whitespaceJeff Garzik
Mostly, trim trailing whitespace. Also: * export ata_dev_pair * move ata_dev_classify export closer to ata_dev_pair export
2006-03-22[libata sata_sil24] cleanups: use pci_iomap(), kzalloc()Jeff Garzik
* libata will soon move to iomap, so we should use pci_iomap() and pci_iounmap(). * Use kzalloc() where appropriate.
2006-03-21[SCSI] libata: implement minimal transport template for ->eh_timed_outTejun Heo
SCSI midlayer has moved hostt->eh_timed_out to transport template. As libata doesn't need full-blown transport support yet, implement minimal transport for libata. No transport class or whatsoever, just empty transport template with ->eh_timed_out hook. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-11[PATCH] sata_sil24: lengthen softreset timeoutTejun Heo
sil24 softreset timeout was > 100ms (100 loops with msleep(1)), which turned out to be too short for some devices (ASI ARAID99 2000). This patch converts sil24 softreset waiting loop to use proper timeout condition and lengthen the timeout to ATA_TMOUT_BOOT secs and check interval to 100ms. Chisato Yamauchi discovered the problem and supplied initial patch. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Chisato Yamauchi <cyamauch@plamo.linet.gr.jp> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-11[PATCH] sata_sil24: exit early from softreset if SStatus reports no deviceTejun Heo
sata_sil24 softreset routine used to check sata_dev_present() after SRST is complete in the hope that SRST may do some good even when SStatus reports no device. This is okay as long as SRST timeout is short (> 100ms in the current code) but it seems that not all SATA devices are happy with short SRST timeout. This patch makes softreset exit early without performing actual SRST if SStatus reports no device in preparation for lengthening SRST timeout. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-05[PATCH] sata_sil24: fix mwdma_mask settingTejun Heo
mwdma_mask was not copied from port_info to probe_ent. Fix it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-03-01[PATCH] sata_sil24: add a new PCI ID for SiI 3124Tejun Heo
Add a new PCI ID for SiI 3124. Reported by Silicon Image. Signed-off-by: Tejun Heo <htejun@gmail.com> Cc: Carlos Pardo <Carlos.Pardo@siliconimage.com> Signed-off-by: Jeff Garzik <jeff@garzik.org>
2006-02-12[PATCH] libata: kill sht->max_sectorsTejun Heo
The previous dev->max_sectors patch made sht->max_sectors meaningless. Kill all initializations of sht->max_sectors. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-12[PATCH] libata: move cdb_len for host to deviceTejun Heo
cdb_len is per-device property. Sharing cdb_len on ap results in inaccurate configuration on revalidation and hotplugging. This patch makes cdb_len per-device. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10[PATCH] sata_sil24: add hardresetTejun Heo
Now that libata is smart enough to handle both soft and hard resets, add hardreset method. Note that sil24 hardreset doesn't supply signature; still, the new reset mechanism can make good use of it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10[PATCH] sata_sil24: convert to new reset mechanismTejun Heo
Convert sata_sil24 ->phy_reset to new reset mechanism. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10[PATCH] libata: kill NULL qc handling from ->eng_timeout callbacksTejun Heo
->eng_timeout cannot be invoked with NULL qc anymore. Add an assertion in ata_scsi_error() and kill NULL qc handling from all ->eng_timeout callbacks. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-02-10[PATCH] libata: use ata_scsi_timed_out()Tejun Heo
Make all libata low level drivers use ata_scsi_timed_out(). Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26[PATCH] libata: implement and apply ata_eh_qc_complete/retry()Tejun Heo
Implement ata_eh_qc_complete/retry() using scsi_eh_finish_cmd() and scsi_eh_flush_done_q(). This removes all eh scsicmd finish hacks from low level drivers. This change was first suggested by Jeff Garzik. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26[PATCH] libata: return AC_ERR_* from issue functionsTejun Heo
Return AC_ERR_* mask from issue fuctions instead of 0/-1. This enables things like failing a qc with AC_ERR_HSM when the device doesn't set DRDY when the qc is about to be issued. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-26[PATCH] libata: add detailed AC_ERR_* flagsTejun Heo
Add detailed AC_ERR_* flags and use them. Long-term goal is to describe all errors with err_mask and tf combination (tf for failed sector information, etc...). After proper error diagnosis is implemented, sense data should also be generated from err_mask instead of directly from hardware tf registers as it is currently. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2006-01-06[BLOCK] update libata to use new blk_ordered for barriersTejun Heo
Reflect changes in SCSI midlayer and updated to use new ordered request implementation Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jens Axboe <axboe@suse.de>
2005-12-06[PATCH] libata: move err_mask to ata_queued_cmdAlbert Lee
- remove err_mask from the parameter list of the complete functions - move err_mask to ata_queued_cmd - initialize qc->err_mask when needed - for each function call to ata_qc_complete(), replace the err_mask parameter with qc->err_mask. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> =============== Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18[PATCH] sil24: make error_intr less verboseTejun Heo
sil24_error_intr logs all error interrupts. ATAPI devices generates many harmless errors which can be ignored and all serious ones are reported via sense data by SCSI layer. Don't log device errors from ATAPI devices. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18[PATCH] sil24: add ATAPI supportTejun Heo
This patch implements ATAPI support for sil24 and bumps driver version to 0.23. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, it has been converted to use ->dev_config as pointed out. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18[PATCH] sil24: use SRST for phy_resetTejun Heo
There seems to be no way to obtain device signature from sil24 after SATA phy reset and SRST is needed anyway for later port multiplier suppport. This patch converts sil24_phy_reset to use SRST instaed. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, I didn't remove the 10ms sleep just to be on the safe side. I think we can live with 10ms sleep on SRST. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-18[PATCH] sil24: add sil24_restart_controllerTejun Heo
When an error condition is raised by device via D2H FIS or SDB. sil24 controller should be restarted by setting PORT_CS_INIT and waiting until PORT_CS_RDY is asserted instead of resetting the controller. This patch implements sil24_restart_controller for those cases. This patch also makes sure that PORT_CS_RDY is asserted on sil24_reset_controller completion. Signed-off-by: Tejun Heo <htejun@gmail.com> -- Jeff, delay is reduced to 1us and cnt increased to 10k. My sil3124 turns on PORT_CS_RDY on the second iteration even without any delay. I think 10k * 1us should be more than enough. I tried to convert both restart and reset to use msleep's with work queue, but if we do that, host_set lock should be released after initiating restart or reset, leading to race condition among reset/restart, other interrupts and timeout. Implementing synchronization among those in low-level driver doesn't seem right. Well, reduced timeout should work for the time being. Thanks. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-16[PATCH] sil24: add constantsTejun Heo
Adds constants for ATAPI support to sata_sil24. This patch is originally from Jeff Garzik <jgarzik@pobox.com>. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-13[PATCH] sil24: add missing ata_pad_free()Tejun Heo
sil24_port_stop() is missing call to ata_pad_free() thus leaking pad buffer when a port is stopped. This patch adds it. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-11-10[libata] constify PCI ID table in several driversJeff Garzik
2005-11-07[libata] eliminate use of drivers/scsi/scsi.h compatibility header/definesJeff Garzik
2005-11-04[libata] ATAPI pad allocation fixes/cleanupJeff Garzik
Use ata_pad_{alloc,free} in two drivers, to factor out common code. Add ata_pad_{alloc,free} to two other drivers, which needed the padding but had not been updated.
2005-10-30Merge branch 'master'Jeff Garzik
2005-10-30[libata] use dev_printk() throughout driversJeff Garzik
A few drivers were not following the standard meme of printing out their driver name and version at module load time; this is fixed as well.
2005-10-30Merge branch 'upstream'Jeff Garzik
2005-10-30[libata] change ata_qc_complete() to take error mask as second argJeff Garzik
The second argument to ata_qc_complete() was being used for two purposes: communicate the ATA Status register to the completion function, and indicate an error. On legacy PCI IDE hardware, the latter is often implicit in the former. On more modern hardware, the driver often completely emulated a Status register value, passing ATA_ERR as an indication that something went wrong. Now that previous code changes have eliminated the need to use drv_stat arg to communicate the ATA Status register value, we can convert it to a mask of possible error classes. This will lead to more flexible error handling in the future.
2005-10-30Merge branch 'upstream'Jeff Garzik
2005-10-29[libata] remove ata_chk_err(), ->check_err() hook.Jeff Garzik
We now depend on ->tf_read() to provide us with the contents of the Error shadow register.
2005-10-29Merge branch 'master'Jeff Garzik
2005-10-29[PATCH] sata_sil24 iomem annotations and fixesAl Viro
trivial iomem annotations + missing memcpy_fromio() caught by those Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-10-28Merge branch 'master'Jeff Garzik
2005-10-22libata: const-ification bombing runJeff Garzik
Enforce access rules where appropriate. If the compiler is smart enough, this may buy us an optimization or two as a side effect.
2005-10-18libata: add ata_sg_is_last() helper, use it in several driversJeff Garzik
2005-10-09[libata sata_sil24] add support for 3131/3531Tejun Heo
This patch adds support for sil_3131 and sil_3531. Both are identical to 3124 except that they have only one port. Bits 30 and 31 of ata_port_info->host_flags is used to encode available port numbers. Version number is bumped to 0.22. Edward Falk supplied all the necessary information and preliminary patch. Signed-off-by: Tejun Heo <htejun@gmail.com>
2005-10-09[libata sata_sil24] nit pickingsTejun Heo
This patch removes unused NR_PORTS macro and adds termination entry to sil24_pci_tbl. Signed-off-by: Tejun Heo <htejun@gmail.com>
2005-10-06[PATCH] sil24: implement tf_read callbackTejun Heo
Hello, guys. This patch implements ->tf_read callback for sil24. It didn't use to be necessary but new ata_gen_fixed_sense now makes use of ->tf_read callback. This patch is taken from Edward Falk's driver. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-06[PATCH] sil24: implement proper TF register reading & cachingTejun Heo
03_sil24_add-tf-reading.patch This patch implements proper TF register reading back and caching and bumps up version to 0.22. This is taken from Edward's driver. Signed-off-by: Tejun Heo <htejun@gmail.com> sata_sil24.c | 50 +++++++++++++++++++++++++++++++++++++++++++++----- 1 file changed, 45 insertions(+), 5 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-06[PATCH] sil24: remove CMDERR clearingTejun Heo
02_sil24_remove-cmderr-clearing.patch CMDERR register doesn't need clearing. This is from Edward's driver. Signed-off-by: Tejun Heo <htejun@gmail.com> sata_sil24.c | 4 ---- 1 file changed, 4 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-10-06[PATCH] sil24: ignore non-error exception irqsTejun Heo
01_sil24_ignore-non-error-exception-irqs.patch Do not error-finish commands for non-error exception irqs - just ignore them. This is taken from Edward's driver. Signed-off-by: Tejun Heo <htejun@gmail.com> sata_sil24.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-09-14[PATCH] sil24: initialization fixTejun Heo
sil24 0.20 didn't use to perform (what seems to be) port multiplier initialization and controller reset 0.10 driver does. This makes some sil24 controllers malfunction. This patch adds PM initialization and controller resetting to initilization and bumps version to 0.21. Please refer to the following thread for more information. http://marc.theaimsgroup.com/?l=linux-ide&m=112582819830324&w=2 http://marc.theaimsgroup.com/?l=linux-ide&m=112636045531060&w=2 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-17[PATCH] sil24: add more comments for constantsTejun Heo
08_sil24_add-comments-for-constants.patch Add more comments to constants. Signed-off-by: Edward Falk sata_sil24.c | 16 ++++++++-------- 1 files changed, 8 insertions(+), 8 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-17[PATCH] sil24: fix PORT_CTRL_STAT constantsTejun Heo
07_sil24_fix-PORT_CTRL_STAT-constants.patch PORT_CTRL_STAT constants were copied incorrectly from the preview driver. Signed-off-by: Edward Falk sata_sil24.c | 8 ++++---- 1 files changed, 4 insertions(+), 4 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-17[PATCH] sil24: replace pp->port w/ ap->ioaddr.cmd_addrTejun Heo
06_sil24_remove-pp-port.patch As ap->ioaddr.cmd_addr isn't used for PORT_TF anymore, replace pp->port w/ it as AHCI does. Signed-off-by: Tejun Heo <htejun@gmail.com> sata_sil24.c | 17 ++++++----------- 1 files changed, 6 insertions(+), 11 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-17[PATCH] sil24: remove PORT_TFTejun Heo
05_sil24_remove-PORT_TF.patch Remove PORT_TF, as taskfile isn't located at PORT_TF. Signed-off-by: Tejun Heo <htejun@gmail.com> sata_sil24.c | 7 +------ 1 files changed, 1 insertion(+), 6 deletions(-) Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 17:30:03 +0000