aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2007-10-23Merge master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6Linus Torvalds
* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (39 commits) [SCSI] qla2xxx: Update version number to 8.02.00-k5. [SCSI] qla2xxx: Correct display of ISP serial-number. [SCSI] qla2xxx: Correct residual-count handling discrepancies during UNDERRUN handling. [SCSI] qla2xxx: Make driver (mostly) legacy I/O port free. [SCSI] qla2xxx: Fix issue where final flash-segment updates were falling into the slow-path write handler. [SCSI] qla2xxx: Handle unaligned sector writes during NVRAM/VPD updates. [SCSI] qla2xxx: Defer explicit interrupt-polling processing to init-time scenarios. [SCSI] qla2xxx: Resync with latest HBA SSID specification -- 2.2u. [SCSI] sym53c8xx: Remove sym_xpt_async_sent_bdr [SCSI] sym53c8xx: Remove pci_dev pointer from sym_shcb [SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONE [SCSI] sym53c8xx: Get rid of IRQ_FMT and IRQ_PRM [SCSI] sym53c8xx: Use scmd_printk where appropriate [SCSI] sym53c8xx: Simplify DAC DMA handling [SCSI] sym53c8xx: Remove tag_ctrl module parameter [SCSI] sym53c8xx: Remove io_ws, mmio_ws and ram_ws elements [SCSI] sym53c8xx: Remove ->device_id [SCSI] sym53c8xx: Use pdev->revision [SCSI] sym53c8xx: PCI Error Recovery support [SCSI] sym53c8xx: Stop overriding scsi_done ...
2007-10-23[SCSI] qla2xxx: Update version number to 8.02.00-k5.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] qla2xxx: Correct display of ISP serial-number.Andrew Vasquez
The original serial-number calculations based on WWPN no longer apply to newer ISPs (ISP24xx and ISP25xx). These newer board's serial number reside in the VPD. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] qla2xxx: Correct residual-count handling discrepancies during ↵Andrew Vasquez
UNDERRUN handling. For recent ISPs, software during CS_UNDERRUN handling must determine if the two residuals, firmware-calculated and FCP_RSP, are different to recognize if a frame has been dropped. Update the driver to catch this condition, and clear the SS_RESIDUAL_UNDER and lscsi_status bits. This logic is consistent with what earlier firmwares did by explicitly cracking open the FCP_RSP statuses and clearing SS_RESIDUAL_UNDER. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] qla2xxx: Make driver (mostly) legacy I/O port free.Andrew Vasquez
Recent ISPs need only the single MMIO BAR to manipulate HW registers. Unfortunately, ISP21xx, ISP22xx, ISP23xx, and ISP63xx type cards still require the I/O mapped region to manipulate the FLASH via the two HW flash-registers (flash_address and flash_data). Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] qla2xxx: Fix issue where final flash-segment updates were falling ↵Andrew Vasquez
into the slow-path write handler. Original implementation would not use the burst-write mechanisms for requests equal to OPTROM_BURST_DWORDS transfer dwords. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] qla2xxx: Handle unaligned sector writes during NVRAM/VPD updates.Andrew Vasquez
Since both NVRAM and VPD regions of the flash reside on unaligned sector boundaries, during update, the driver must perform a read-modify-write operation to the composite NVRAM/VPD region. This affects ISP25xx type boards only. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] qla2xxx: Defer explicit interrupt-polling processing to init-time ↵Andrew Vasquez
scenarios. As the intermixing may cause issues where HCCR bits could be cleared inappropriately during MSI/MSI-X interrupt handling. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] qla2xxx: Resync with latest HBA SSID specification -- 2.2u.Andrew Vasquez
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove sym_xpt_async_sent_bdrMatthew Wilcox
This function just printed a message to the user; move the print to its only caller, and turn it into an starget_printk. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove pci_dev pointer from sym_shcbMatthew Wilcox
This structure is accessed by the device; the fewer Linux things in it, the better. Using the pci_dev pointer from the hostdata requires a lot of changes: - Pass Scsi_Host to a lot of routines which currently take a sym_hcb. - Set the Scsi_Host as the pci drvdata (instead of the sym_hcb) Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Make interrupt handler capable of returning IRQ_NONEMatthew Wilcox
Make sym_interrupt return an irqreturn_t instead of void, and take a Scsi_Host instead of a sym_hcb. Pass the Scsi_Host to the interrupt handler instead of the sym_hcb. Rename the host_data to sym_data. Keep a pci_dev pointer in the sym_data. Rename the Scsi_Host from instance to shost. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Get rid of IRQ_FMT and IRQ_PRMMatthew Wilcox
These macros aren't needed any more. They used to be used for SPARC. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Use scmd_printk where appropriateMatthew Wilcox
If we have a scsi_cmnd, it gives the user more information than the sym_name, and maybe the target. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Simplify DAC DMA handlingMatthew Wilcox
By introducing the use_dac(), set_dac() and DMA_DAC_MASK macros, we can eliminate a lot of ifdefs from the code. We now rely on the compiler to optimise away a few things that we'd formerly relied on the preprocessor to do. This makes sym_setup_bus_dma_mask() small enough to inline into its only caller. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove tag_ctrl module parameterMatthew Wilcox
With sysfs making these options tunable at runtime, there's no justification for keeping this horrendously complex specification string around. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove io_ws, mmio_ws and ram_ws elementsMatthew Wilcox
These struct elements record info that is never needed Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove ->device_idMatthew Wilcox
Following the same path as ->revision_id, remove ->device_id Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Use pdev->revisionMatthew Wilcox
Auke missed the sym2 driver in his initial sweep. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: PCI Error Recovery supportLinas Vepstas
This patch adds the PCI error recovery callbacks to the Symbios SCSI device driver. It includes support for First Failure Data Capture. Signed-off-by: Linas Vepstas <linas@austin.ibm.com> Assorted changes to initial patches, including returning IRQ_NONE from the interrupt handler if the device is offline and re-using the eh_done completion in the scsi error handler. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Stop overriding scsi_doneMatthew Wilcox
Instead of telling the reset routine that the command completed from sym_eh_done, do it from sym_xpt_done. The 'to_do' element of the ucmd is redundant -- it serves only to tell whether eh_done is valid or not, and we can tell this by checking to see if it's NULL. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Don't disable interrupts in the interrupt handlerMatthew Wilcox
Interrupts can't be re-entered, so it's sufficient to call spin_lock, not spin_lock_irqsave(). Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove unnecessary check in queuecommandMatthew Wilcox
The midlayer won't scan the host ID, so we don't need to check. This is the only caller of sym_xpt_done2, so remove that too. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Remove data_mapping and data_mappedMatthew Wilcox
Before all commands used sg, data_mapping and data_mapped were used to distinguish whether the command had used map_single or map_sg. Now all commands are sg, so we can delete data_mapping, data_mapped and the wrapper functions __unmap_scsi_data, __map_scsi_sg_data, unmap_scsi_data and map_scsi_sg_data. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Use pci_dev irq numberMatthew Wilcox
Don't cache a private copy of the interrupt number Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] sym53c8xx: Work around 53c896 erratumKai Makisara
Prevent DMA transfers from crossing the 16MB limit for early 53c896 chips. Signed-off-by: Matthew Wilcox <willy@linux.intel.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23[SCSI] qla1280: eliminate wasted space in request and response ringJohannes Dickgreber
i think there is wasted space in allocated pages for request and response rings. The allocations are made with REQUEST_ENTRY_CNT + 1 and RESPONSE_ENTRY_CNT + 1, but they are set with 256 and 16. So we got more pages, which we dont use very much so eliminate them. Signed-off-by: Johannes Dickgreber <tanzy@gmx.de> Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-23powerpc: Fix fallout from sg_page() changesOlof Johansson
Fix fallout from 18dabf473e15850c0dbc8ff13ac1e2806d542c15: In file included from include/linux/dma-mapping.h:52, from drivers/base/dma-mapping.c:10: include/asm/dma-mapping.h: In function 'dma_map_sg': include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page' include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page' include/asm/dma-mapping.h:288: error: 'struct scatterlist' has no member named 'page' include/asm/dma-mapping.h:289: error: 'struct scatterlist' has no member named 'page' include/asm/dma-mapping.h:290: error: 'struct scatterlist' has no member named 'page' include/asm/dma-mapping.h: In function 'dma_sync_sg_for_cpu': include/asm/dma-mapping.h:331: error: 'struct scatterlist' has no member named 'page' drivers/scsi/ps3rom.c: In function 'fetch_to_dev_buffer': drivers/scsi/ps3rom.c:150: error: 'struct scatterlist' has no member named 'page' Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-22[SG] Update drivers to use sg helpersJens Axboe
Signed-off-by: Jens Axboe <jens.axboe@oracle.com>
2007-10-21[SCSI] aic7xxx: Fix firmware buildHannes Reinecke
If a prefix is selected for flex, we should be using it everywhere. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-21[SCSI] aic7xxx: Update Maintainer informationHannes Reinecke
Might as well take the blame officially. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-21[SCSI] aic7xxx: Add suspend/resume supportHannes Reinecke
The aic7xxx driver already contains fragments for suspend/resume support. So we only need to update them to the current interface and have full PCI suspend/resume. Signed-off-by: Hannes Reinecke <hare@suse.de> Tested-by: Jens Axboe <jens.axboe@oracle.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-21[SCSI] qla1280: uses wrong failure path after failed pci_set_dma_maskJohannes Dickgreber
A failure here wouldn't currently free the irq; go to the irq free path instead. Signed-off-by: Johannes Dickgreber <tanzy@gmx.de> Acked-by: Jes Sorensen <jes@sgi.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-19Spelling fix: explicitlyJean Delvare
From: Jean Delvare <khali@linux-fr.org> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Convert files to UTF-8 and some cleanupsJan Engelhardt
* Convert files to UTF-8. * Also correct some people's names (one example is Eißfeldt, which was found in a source file. Given that the author used an ß at all in a source file indicates that the real name has in fact a 'ß' and not an 'ss', which is commonly used as a substitute for 'ß' when limited to 7bit.) * Correct town names (Goettingen -> Göttingen) * Update Eberhard Mönkeberg's address (http://lkml.org/lkml/2007/1/8/313) Signed-off-by: Jan Engelhardt <jengelh@gmx.de> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Fix misspellings of "system", "controller", "interrupt" and "necessary".Robert P. J. Day
Fix the various misspellings of "system", controller", "interrupt" and "[un]necessary". Signed-off-by: Robert P. J. Day <rpjday@mindspring.com> Signed-off-by: Adrian Bunk <bunk@kernel.org>
2007-10-19Change struct marker usersMathieu Desnoyers
Prior to use struct marker in the linux kernel markers, we need to clean two drivers which use this structure name. Change bonding driver types : - struct marker to struct bond_marker. - marker_t to bond_marker_t. - marker_header to bond_marker_header. - marker_header_t to bond_marker_header_t. Change qla4xxx struct marker_entry usage : - Change struct marker_entry for struct qla4_marker_entry. Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Cc: Chad Tindel <ctindel@users.sourceforge.net> Cc: Jay Vosburgh <fubar@us.ibm.com> Cc: David Somayajulu <david.somayajulu@qlogic.com> Cc: James Bottomley <James.Bottomley@SteelEye.com> Cc: Ravi Anand <ravi.anand@qlogic.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19Use helpers to obtain task pid in printksPavel Emelyanov
The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19FlashPoint, use BIT instead of BITWJiri Slaby
FlashPoint, use BIT instead of BITW BITW was an ushort variant of BIT, use BIT instead Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19define global BIT macroJiri Slaby
define global BIT macro move all local BIT defines to the new globally define macro. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Kumar Gala <galak@gate.crashing.org> Cc: Dmitry Torokhov <dtor@mail.ru> Cc: Jeff Garzik <jeff@garzik.org> Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Russell King <rmk@arm.linux.org.uk> Acked-by: Ralf Baechle <ralf@linux-mips.org> Cc: "John W. Linville" <linville@tuxdriver.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19remove asm/bitops.h includesJiri Slaby
remove asm/bitops.h includes including asm/bitops directly may cause compile errors. don't include it and include linux/bitops instead. next patch will deny including asm header directly. Cc: Adrian Bunk <bunk@kernel.org> Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-19advansys: depends on VIRT_TO_BUSAndrew Morton
Fix powerpc allmodconfig build: advansys requires virt_to_bus() but powerpc doesn't implement it. Cc: James Bottomley <James.Bottomley@steeleye.com> Cc: Paul Mackerras <paulus@samba.org> Acked-by: Matthew Wilcox <willy@linux.intel.com> Cc: "David S. Miller" <davem@davemloft.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18Merge branch 'upstream-linus' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev: [libata] kill ata_sg_is_last() Update libata driver for bf548 atapi controller against the 2.6.24 tree. libata-sff: Correct use of check_status() drivers/ata: add support to Freescale 3.0Gbps SATA Controller pata_acpi: fix build breakage if !CONFIG_PM
2007-10-18Add missing newlines to some uses of dev_<level> messagesJoe Perches
Found these while looking at printk uses. Add missing newlines to dev_<level> uses Add missing KERN_<level> prefixes to multiline dev_<level>s Fixed a wierd->weird spelling typo Added a newline to a printk Signed-off-by: Joe Perches <joe@perches.com> Cc: "Luck, Tony" <tony.luck@intel.com> Cc: Jens Axboe <jens.axboe@oracle.com> Cc: Mark M. Hoffman <mhoffman@lightlink.com> Cc: Roland Dreier <rolandd@cisco.com> Cc: Tilman Schmidt <tilman@imap.cc> Cc: David Woodhouse <dwmw2@infradead.org> Cc: Jeff Garzik <jeff@garzik.org> Cc: Stephen Hemminger <shemminger@linux-foundation.org> Cc: Greg KH <greg@kroah.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Alessandro Zummo <a.zummo@towertech.it> Cc: David Brownell <david-b@pacbell.net> Cc: James Smart <James.Smart@Emulex.Com> Cc: Andrew Vasquez <andrew.vasquez@qlogic.com> Cc: "Antonino A. Daplas" <adaplas@pol.net> Cc: Evgeniy Polyakov <johnpol@2ka.mipt.ru> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2007-10-18[libata] kill ata_sg_is_last()Jeff Garzik
Short term, this works around a bug introduced by early sg-chaining work. Long term, removing this function eliminates a branch from a hot path loop in each scatter/gather table build. Also, as this code demonstrates, we don't need to _track_ the end of the s/g list, as long as we mark it in some way. And doing so programatically is nice. So its a useful cleanup, regardless of its short term effects. Based conceptually on a quick patch by Jens Axboe. Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2007-10-18[SCSI] gdth: __init fixesAdrian Bunk
This patch fixes the following build warnings: WARNING: vmlinux.o(.text+0xbcffdb): Section mismatch: reference to .init.text.20:gdth_search_drives (between 'gdth_pci_probe_one' and 'gdth_start_timeout') WARNING: vmlinux.o(.text+0xbd0102): Section mismatch: reference to .init.text.20:gdth_enable_int (between 'gdth_pci_probe_one' and 'gdth_start_timeout') Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-18[SCSI] aic7xxx_old: fix accidental logic reversalAdrian Bunk
Commit bbfbbbc1182f8b44c8cc4c99f4a3f3a512149022 accidentally reversed the logic of this NULL check. Spotted by the Coverity checker. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-18[SCSI] qla2xxx: printk fixesAndrew Morton
drivers/scsi/qla2xxx/qla_sup.c: In function 'qla24xx_write_flash_data': drivers/scsi/qla2xxx/qla_sup.c:655: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'dma_addr_t' drivers/scsi/qla2xxx/qla_sup.c: In function 'qla25xx_read_optrom_data': drivers/scsi/qla2xxx/qla_sup.c:1853: warning: format '%llx' expects type 'long long unsigned int', but argument 6 has type 'dma_addr_t' Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Acked-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-18[SCSI] lpfc: lpfc_debugfs.c: fix typoAdrian Bunk
This patch fixes a typo introduced by commit bbfbbbc1182f8b44c8cc4c99f4a3f3a512149022. It wasn't a compile error since CONFIG_LPFC_DEBUG_FS is not (yet?) available as an option. Signed-off-by: Adrian Bunk <bunk@kernel.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-10-17[SCSI] initio: Fix merge falloutAlan Cox
Fix IRQ reporting - just assign the ->pci_dev pointer earlier and use the pci_dev irq field rather than keeping a private one Init the spinlock as it works better on SMP that way Signed-off-by: Alan Cox <alan@redhat.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-22 05:57:41 +0000