aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2005-09-07[PATCH] drivers: convert kcalloc to kzallocPekka Enberg
This patch converts kcalloc(1, ...) calls to use the new kzalloc() function. Signed-off-by: Pekka Enberg <penberg@cs.helsinki.fi> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05Merge branch 'upstream' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-09-05/spare/repo/libata-dev branch 'iomap-try3'Jeff Garzik
2005-09-05[PATCH] swsusp: switch pm_message_t to structPavel Machek
This adds type-checking to pm_message_t, so that people can't confuse it with int or u32. It also allows us to fix "disk yoyo" during suspend (disk spinning down/up/down). [We've tried that before; since that cpufreq problems were fixed and I've tried make allyes config and fixed resulting damage.] Signed-off-by: Pavel Machek <pavel@suse.cz> Signed-off-by: Alexander Nyberg <alexn@telia.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-09-05[PATCH] mips: clean up 32/64-bit configurationRalf Baechle
Start cleaning 32-bit vs. 64-bit configuration. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-30[libata] fix ATAPI-enable typoJeff Garzik
Dumb typo spotted by Mark Lord.
2005-08-30[libata] update several drivers to use pci_iomap()/pci_iounmap()Jeff Garzik
2005-08-30[libata] __iomem annotations for various driversJeff Garzik
2005-08-30[libata ahci] minor remove/unplug path cleanupJeff Garzik
Don't bother calling a hook, to call our own module, to call a helper than simply calls ionumap(). If you unroll all that convolution, you get a simple kfree()+iounmap() pair of calls.
2005-08-30[libata] allow ATAPI to be enabled with new atapi_enabled module optionJeff Garzik
ATAPI is getting close to being ready. To increase exposure, we enable the code in the upstream kernel, but default it to off (present behavior). Users must pass atapi_enabled=1 as a module option (if module) or on the kernel command line (if built in) to turn on discovery of their ATAPI devices.
2005-08-29Merge refs/heads/upstream from ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-08-30[PATCH] Make MODULE_DEVICE_TABLE work for vio devicesStephen Rothwell
Make MODULE_DEVICE_TABLE work for vio devices. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-30[PATCH] Create vio_bus_opsStephen Rothwell
Create vio_bus_ops so that we just pass a structure to vio_bus_init instead of three separate function pointers. Rearrange vio.h to avoid forward references. vio.h only needs struct device_node from prom.h so remove the include and just declare it. Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
2005-08-29Merge /spare/repo/linux-2.6/Jeff Garzik
2005-08-29Merge /spare/repo/linux-2.6/Jeff Garzik
2005-08-29[libata sata_nv] NVIDIA ok'd license change from OSL+GPL to GPLJeff Garzik
2005-08-29Merge refs/heads/upstream from ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-08-29[libata sata_promise] Do not attempt to use SATA phy on PATA controllersJeff Garzik
2005-08-28[libata] license change, other bitsJeff Garzik
- changes license of all code from OSL+GPL to plain ole GPL - except for NVIDIA, who hasn't yet responded about sata_nv - copyright holders were already contacted privately - adds info in each driver about where hardware/protocol docs may be obtained - where I have made major contributions, updated copyright dates
2005-08-27[PATCH] sg.c: fix a memory leak in devices seq_file implementationJan Blunck
I know that scsi procfs is legacy code but this is a fix for a memory leak. While reading through sg.c I realized that the implementation of /proc/scsi/sg/devices with seq_file is leaking memory due to freeing the pointer returned by the next() iterator method. Since next() might return NULL or an error this is wrong. This patch fixes it through using the seq_files private field for holding the reference to the iterator object. Here is a small bash script to trigger the leak. Use slabtop to watch the size-32 usage grow and grow. #!/bin/sh while true; do cat /proc/scsi/sg/devices > /dev/null done Signed-off-by: Jan Blunck <j.blunck@tu-harburg.de> Acked-by: James Bottomley <James.Bottomley@steeleye.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-27[libata scsi] fix read/write translation edge casesJeff Garzik
Fix bugs for unlikely edge cases noticed by Douglas Gilbert: - When READ(6)/WRITE(6) sector count == 0, treat it as 256 sectors - For other READ(x)/WRITE(x), when sector count == 0, error. We don't support successfully completing zero-length transfers at this time.
2005-08-27libata: fix a few alan-ismsJeff Garzik
2005-08-26[libata sata_sil] list documentation URL, since its publicJeff Garzik
2005-08-26[PATCH] libata: regularize dma_start/stop argumentsAlan Cox
Needed for a few PATA drivers. Also fix up a wrong comment. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-26[PATCH] libata: typoAlan Cox
You spelt heuristic wrongly. Also reformatted to 80 columns, ignore the diff and fix the typo if you prefer that. Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-25libata: fix EH lockingJeff Garzik
Wrap ata_qc_complete() calls in EH context in spinlocks, to prevent races (mainly in ATAPI code paths).
2005-08-24Merge /spare/repo/linux-2.6/Jeff Garzik
2005-08-23Merge head 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-08-23[PATCH] Kconfig fix (non-modular SCSI drivers)Al Viro
non-modular scsi drivers depend on built-in scsi Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23[PATCH] Kconfig fix (acornscsi)Al Viro
acornscsi had been broken for a long time; marked as such Signed-off-by: Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-23/spare/repo/libata-dev branch 'upstream-fixes'Jeff Garzik
2005-08-23libata: release prep (bump versions, etc.)Jeff Garzik
- bump versions where necessary - remove two duplicated+outdated doc comments - add MODULE_VERSION() to AHCI driver
2005-08-23Merge /spare/repo/linux-2.6/Jeff Garzik
2005-08-23[PATCH] sil: apply M15W quirk selectively (take 2)Tejun Heo
As SII reports that only original 3112's are affected by M15W quirk, This patch adds SIL_FLAG_MOD15WRITE to selectively apply M15W quirk depending on chipsets. As of yet, we don't know exactly which PCI IDs are for original 3112, so M15W quirk is applied to all except for 3512 and 3124. Once more info is avaliable, we can change some of these sil_3112_m15w's to sil_3112. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23[PATCH] libata: implement ata_poll_qc_complete and use it in polling functionsTejun Heo
[PATCH libata-dev-2.6:upstream] implement ata_poll_qc_complete and use it in polling functions Previously, libata polling functions turned irq back on and completed qc commands without holding host lock. This creates a race condition between the polling task and interrupts from other ports on the same host set or spurious interrupt from itself. This patch implements ata_poll_qc_complete which enables irq and completes qc atomically and convert all polling functions. Note: atapi_packet_task() didn't use to turn irq back on or clear ATA_FLAG_NOINTR on error exits. This patch makes it use ata_poll_qc_complete which does both. Note: With this change, ALL invocations of ata_qc_complete() are now done under host_set lock. Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23[PATCH] fix atapi_packet_task vs. intr race (take 2)Tejun Heo
Interrupts from devices sharing the same IRQ could cause ata_host_intr to finish commands being processed by atapi_packet_task if the commands are using ATA_PROT_ATAPI_NODATA or ATA_PROT_ATAPI_DMA protocol. This is because libata interrupt handler is unaware that interrupts are not expected during that period. This patch adds ATA_FLAG_NOINTR flag to tell the interrupt handler that we're not expecting interrupts. Note that once proper HSM is implemented for interrupt-driven PIO, this should be merged into it and this flag will be removed. ahci.c is a different kind of beast, so it's left alone. * The following drivers use ata_qc_issue_prot and ata_interrupt, so changes in libata core will do. ata_piix sata_sil sata_svw sata_via sata_sis sata_uli * The following drivers use ata_qc_issue_prot and custom intr handler. They need this change to work correctly. sata_nv sata_vsc * The following drivers use custom issue function and intr handler. Currently all custom issue functions don't support ATAPI, so this change is irrelevant, updated for consistency and to avoid later mistakes. sata_promise sata_qstor sata_sx4 Signed-off-by: Tejun Heo <htejun@gmail.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23[PATCH] Fix HD activity LED with ahciMartin Wilck
Patch: fix wrong HD activity control by ahci driver The ahci driver 1.0 sets the SActive bit on every transaction, causing the LED to light up. The SActive bit is used only for native command queuing (NCQ) which the current driver version doesn't implement. Resetting the SActive bit is the device's responsibility (by sending a "Set Device Bits FIS" to the host adapter) but this is not required in response to non-NCQ commands, and (most) devices don't. Thus the LED stays always on. This patch fixes the LED behavior. Spec references: http://www.intel.com/technology/serialata/pdf/rev1_1.pdf, sec. 3.3.13, 5.5.1 http://www.serialata.org/docs/serialata10a.pdf http://www.intel.com/design/storage/papers/25266401.pdf Signed-off-by: Martin.Wilck@fujitsu-siemens.com Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23[PATCH] sata_promise: Add PDC40519 idDaniel Drake
The Promise TX4200 is a 4-port SATA controller based on the PDC40519 chip. It meets the description of the 20319, so just a simple ID needs to be added to support this hardware. Thanks to Martin Povolný for testing. Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23[PATCH] sata_promise: Add PDC40718 idOtto Meier
Otto Meier recently submitted a patch to support the PDC40718 chip (marketed as SATA300 TX4, a 4-port SATA controller). Signed-off-by: Otto Meier <gf435@gmx.net> Signed-off-by: Daniel Drake <dsd@gentoo.org> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23[PATCH] libata: Clear ATA_QCFLAG_ACTIVE flag before calling the completion ↵Albert Lee
callback Description: After calling the completion callback, the libata error handler might be running and getting atapi sense data. Clearing the ATA_QCFLAG_ACTIVE flag at this point might interfere with the libata error handler. Changes: - Clear the ATA_QCFLAG_ACTIVE flag before calling the completion callback (and also before the error handler) - Add some comment Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-23/spare/repo/libata-dev branch 'upstream-fixes'Jeff Garzik
2005-08-14Revert "dc395x: Fix support for highmem"Linus Torvalds
It introduces a repeatable oops in the driver, which is a bigger problem than the patch tries to solve. From the original description: Author: Jamie Lenehan <lenehan@twibble.org> Date: Thu Mar 3 14:41:40 2005 +0200 [PATCH] dc395x: Fix support for highmem From: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Removes the page_to_virt and maps sg lists dynamically. This makes the driver work with highmem pages. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Jamie Lenehan <lenehan@twibble.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com> Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2005-08-12[PATCH] libata handle the case when device returns/needs extra dataAlbert Lee
PATCH 2/2: handle the case when device returns/needs extra data Description: Sometimes the device returns/needs extra data than expected. Changes: Modify __atapi_pio_bytes() to handle the case where device returns/needs extra data. - for read case, discard trailing data from the device - for write case, padding zero data to the device Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-12[PATCH] libata ata_data_xfer() fixAlbert Lee
PATCH 1/2: ata_data_xfer() fix Changes: - Modify ata_mmio_data_xfer() and ata_pio_data_xfer() to handle odd-lengthed buffer. - Add some function comments This patch does not reuse ap->pad as alignment buffer since using local variable seems good enough. Signed-off-by: Albert Lee <albertcc@tw.ibm.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-11[libata scsi] add START STOP UNIT translationDouglas Gilbert
2005-08-11Merge /spare/repo/linux-2.6/Jeff Garzik
2005-08-10Merge head 'upstream-fixes' of ↵Linus Torvalds
master.kernel.org:/pub/scm/linux/kernel/git/jgarzik/libata-dev
2005-08-10[PATCH] ahci: AHCI mode SATA patch for Intel ICH7-M DHJason Gaston
Hello, This patch adds the Intel ICH7-M DH DID to the ahci.c file for AHCI mode SATA support.  This patch was built against the 2.6.13-rc6 kernel.   If acceptable, please apply. Thanks, Jason Gaston Signed-off-by:  Jason Gaston <Jason.d.gaston@intel.com> Signed-off-by: Jeff Garzik <jgarzik@pobox.com>
2005-08-10Merge /spare/repo/linux-2.6/Jeff Garzik
2005-08-10libata: fix EH-related lockup by properly cleaning EH command listTejun Heo
Yet another hack due to the fact that libata is the only user of SCSI's ->eh_strategy_handler() hook.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 16:58:49 +0000