aboutsummaryrefslogtreecommitdiff
path: root/drivers/scsi
AgeCommit message (Collapse)Author
2006-03-09[SCSI] add missing transport_container_unregister in sas classJames Bottomley
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-07[SCSI] sr: partial revert of 24669f75a3231fa37444977c92d1f4838bec1233James Bottomley
The patch [SCSI] SCSI core kmalloc2kzalloc Has an incorrect piece in sr_ioctl.c; it changes buffer from kmalloc to kzalloc, but then removes the clearing of the stack variable struct packet_command. This, in turn leaves rubbish in the sense pointer which the sr_do_ioctl() command then happily writes to ... oops. Thanks to Mike Christie <michaelc@cs.wisc.edu> for spotting this. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-07[SCSI] osst: changes required to move forward to block requestWillem Riede
On 02/07/2006 04:12:55 AM, Christoph Hellwig wrote: > On Mon, Feb 06, 2006 at 08:02:21PM -0500, Willem Riede wrote: > > > But I will certainly help retire scsi_request. And anything else that is > > needed to keep up with proper kernel style. Let me know what those are, if > > you would? I'll start looking at how st has changed, and will be back with > > any questions I may have. > > right now the above is the most urgent bit. What would be nice but not > required is a conversion to the sense handling helpers, similar to what > st got (aka using the *normalize_sense functions and then dealing with the > parsed sense buffer instead of the raw sense data) Ok, so here is my first take at satisfying this request. Be warned, that beyond compiling, and checking that the new module doesn't immediately blow up, there hasn't yet been a lot of testing. But this should allow you to comment on the changes, and move forward with dropping scsi_request from the kernel code. Signed-off-by: Willem Riede <osst@riede.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[SCSI] lpfc: minor syntax fixesJames Bottomley
Stop gcc complaining about undefined variables Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Change version number to 8.1.3Jamie Wellnitz
Change version number to 8.1.3 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix polling mode panicJamie Wellnitz
Fix polling mode panic Cause: Race between interrupt driven and polling path in harvesting iocbs from the response ring. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Protect NPL lists with host lockJamie Wellnitz
Protect NPL lists with host lock Symptoms: lpfc_findnode_rpi and lpfc_findnode_did can be called outside of the discovery thread context. We have to iterate through the NPL lists under the host lock and all add/del operations on those lists have to be done under host lock. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix deadlock in lpfc_fdmi_tmo_handlerJamie Wellnitz
Fix deadlock in lpfc_fdmi_tmo_handler lpfc_fdmi_tmo_handler was calling lpfc_fdmi_cmd with the host_lock held. lpfc_fdmi_cmd assumes the host_lock is released as it calls functions that acquire the host_lock. lpfc_fdmi_tmo_handler acquired the host_lock to protect access to work_hba_events. This was already checked in the worker thread so we can remove that code completely and remove access to the host_lock. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Fix performance when using multiple SLI ringsJamie Wellnitz
Fix performance when using multiple SLI rings Currently the driver allocates all of its SLI command and response ring entries to one primary ring. Other rings get little, or no, resources. Allow more resources to be given to ring 1 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Remove unused MBhostaddr from lpfc_sli structureJamie Wellnitz
Remove unused MBhostaddr from lpfc_sli structure Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: PCI hrd_type should be obtained with ↵Jamie Wellnitz
pci_read_config_byte() macro PCI hrd_type should be obtained with pci_read_config_byte() macro Driver keys off of this field to report the proper adapter type. The pci subsystem explicitly clears the multiport bit in the copy of the field given the driver. Thus, to properly name the card, obtain it from config space. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] lpfc 8.1.3: Derive supported speeds from LMT field in the READ_CONFIGJamie Wellnitz
Derive supported speeds from LMT field in the READ_CONFIG Driver was keying off internal cores. Use what the firmware reports instead. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-06[PATCH] convert aic94xx over to using the sas transport end deviceJames Bottomley
Begin introducing the concept of sas remote devices that have an rphy embedded. The first one (this) is a simple end device. All that an end device really does is have port mode page parameters contained. The next and more complex piece will be expander remote devices. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-03[SCSI] make some sas class properties optionalJames Bottomley
aic94xx doesn't have a use for the bay or enclosure identifiers. Also, I think it's not going to need a get_linkerrors(), so wire up all of these exported properties as conditional on the underlying function support. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02[SCSI] qla2xxx: use kthread_ APIChristoph Hellwig
Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Also switch from semaphore-based thread wakeup to wake_up_process. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-By: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-03-02[SCSI] add 6.0 Gbit phy definitions to the sas transport classJames Bottomley
I don't think these exist in silicon yet, but the aic94xx driver has a register setting for them. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Change version number to 8.1.2Jamie Wellnitz
Change version number to 8.1.2 Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Modify RSCN handling to unregister rpis on lost ↵Jamie Wellnitz
FCP_TARGETs immediately Modify RSCN handling to unregister rpis on lost FCP_TARGETs immediately Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fix panic caused by HBA resets and target side cable pullsJamie Wellnitz
Fix panic caused by HBA resets and target side cable pulls Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed module parameter descriptions.Jamie Wellnitz
Fixed module parameter descriptions. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Code cleanup of lpfc_mbx_cmpl_config_linkJamie Wellnitz
Code cleanup of lpfc_mbx_cmpl_config_link Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Allow turning on internal loop-back modeJamie Wellnitz
Allow turning on internal loop-back mode Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Code style changes for Discovery codeJamie Wellnitz
Code style changes for Discovery code Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc staticJamie Wellnitz
Make lpfc_els_rsp_rps_acc and lpfc_els_rsp_rpl_acc static Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Added support for FANJamie Wellnitz
Added support for FAN Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Add ERROR and WARM_START modes for diagnostic purposes.Jamie Wellnitz
Add ERROR and WARM_START modes for diagnostic purposes. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove hba_list from struct lpfc_hbaJamie Wellnitz
Remove hba_list from struct lpfc_hba Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Correct use of the hostdata field in scsi_hostJamie Wellnitz
Correct use of the hostdata field in scsi_host Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Misc FC Discovery changes :Jamie Wellnitz
Misc FC Discovery changes : - Added FC_BYPASSED_MODE statistic - Corrected some log message data - Fix up Discovery infrastructure to support FAN: Allow Fabric entities to flow thru DSM Fix up linkup/linkdown unregister login processing for Fabric entities Clean up Discovery code Utilize nodev_tmo for Fabric entities - Use of 3 * ratov for CT handling timeouts - Fix up DSM to make more appropriate decisions and clean up code. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Add module parameter to limit number of outstanding ↵Jamie Wellnitz
commands per lpfc HBA Add module parameter to limit number of outstanding commands per lpfc HBA Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed a double insertion of mail box object to the SLI ↵Jamie Wellnitz
mailbox list. Fixed a double insertion of mail box object to the SLI mailbox list. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed system panic in lpfc_sli_brdreset during dynamic ↵Jamie Wellnitz
add of LP11K Fixed system panic in lpfc_sli_brdreset during dynamic add of LP11K Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Explicitly initialize the skip_post argument to ↵Jamie Wellnitz
lpfc_sli_send_reset Explicitly initialize the skip_post argument to lpfc_sli_send_reset on a ERATT interrupt. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Fixed a race condition in the PLOGI retry logic.Jamie Wellnitz
Fixed a race condition in the PLOGI retry logic. Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Handling of ELS commands RRQ, RPS, RPL and LIRR correctlyJamie Wellnitz
Handling of ELS commands RRQ, RPS, RPL and LIRR correctly Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove unused SLI_IOCB_HIGH_PRIORITYJamie Wellnitz
Remove unused SLI_IOCB_HIGH_PRIORITY Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove unreferenced cfg_fcp_bind_method from struct lpfc_hbaJamie Wellnitz
Remove unreferenced cfg_fcp_bind_method from struct lpfc_hba Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-28[SCSI] lpfc 8.1.2: Remove unused prototypes from lpfc_crtn.hJamie Wellnitz
Remove unused prototypes from lpfc_crtn.h Signed-off-by: Jamie Wellnitz <Jamie.Wellnitz@emulex.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] scsi: Handle device_add failure in scsi_alloc_targetBrian King
Fixes scsi to handle device_add failure in scsi_alloc_target. Without this patch, if this call were to fail, we can oops when we free the target. Signed-off-by: Brian King <brking@us.ibm.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] fix scsi process problems and clean up the target reap issuesJames Bottomley
In order to use the new execute_in_process_context() API, you have to provide it with the work storage, which I do in SCSI in scsi_device and scsi_target, but which also means that we can no longer queue up the target reaps, so instead I moved the target to a state model which allows target_alloc to detect if we've received a dying target and wait for it to be gone. Hopefully, this should also solve the target namespace race. Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] don't call ips_eh_reset in ips_queue to avoid deadlockMike Christie
When the locking was changed in the eh code ips_eh_reset was changed so that it was a wraper around __ips_eh_reset and all ips_eh_reset does is grab the host lock and then calls __ips_eh_reset. In the queuecommand, ips_queue is called with the host_lock held so if it calls ips_eh_reset we will have a problem. This patch just has ips_queue call __ips_eh_reset. Patch is only compile tested. I do not have the HW. Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Hammer, Jack <Jack_Hammer@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] scsi_lib: fix recognition of cache type of Initio SBP-2 bridgesAl Viro
Regardless what mode page was asked for, Initio INIC-14x0 and INIC-2430 always return page 6 without mode page headers. Try to recognise this as a special case in scsi_mode_sense and setting the mode sense headers accordingly. Signed-off-by: Al Viro <viro@ftp.linux.org.uk> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] Improve message printing codeMatthew Wilcox
Fix a bug where we would consume one byte too many in the message printing code. Add support for 256-byte long messages. Add support for the Modify Bidirectional Data Pointer message. Signed-off-by: Matthew Wilcox <matthew@wil.cx> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] Recognize missing LUNs for non-standard devicesAlan Stern
Some non-standard SCSI targets or protocols, such as USB UFI, report "no LUN present" by setting the Peripheral Device Type to 0x1f and the Peripheral Qualifier to 0 (not 3 as the standard requires) in the INQUIRY response. This patch (as650b) adds a new target flag and code to accomodate such targets. Signed-off-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] aic7xxx: semaphore to completion conversionChristoph Hellwig
On Tue, Jan 31, 2006 at 06:20:18PM +0100, Christoph Hellwig wrote: > switch eh_sem to a completion. due to wait_for_completion_timeout this > also nicely simplifies the code. Unfortunately it's untested, so if > someone with the hardware could give it a try that would be nice. Once > it works the same thing can be applied to aic79xx. New version that switches to the common onstack completion and just a pointer in the platform_data struct idiom. This gets rid of all the flags fiddling. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] aacraid: use kthread_ APIChristoph Hellwig
Use the kthread_ API instead of opencoding lots of hairy code for kernel thread creation and teardown. Signed-off-by: Christoph Hellwig <hch@lst.de> Acked-by: Salyzyn, Mark <mark_salyzyn@adaptec.com> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] Add EXPORT_SYMBOL for spi msg functionsJames Bottomley
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] sas: add support for enclosure and bad ID rphy attributesChristoph Hellwig
Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] jazz_esp: Fix sparse warnings.Ralf Baechle
Using plain integer as NULL pointer. Signed-off-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2006-02-27[SCSI] jazz_esp: Delete useless prototypeRalf Baechle
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 15:37:09 +0000